Site inspection report
•
1 like•512 views
The document is a site inspection report for fiberglass reinforced plastic spools for a flue gas desulfurization system at a thermal power plant. It verifies that the large diameter spools and smaller spools are as per the drawings. It notes that extra bonding material inside the spools is correct according to specifications and that shortages of spools and bolts will be resupplied. Repairing the inside bonding material is not recommended as it could cause cracks, and any extra material will be removed during initial testing when water flows through.
Report
Share
Report
Share
Download to read offline
Recommended
Goel Scientific General information and introduction
Borosilicate glass represents unmatched standardized glass for construction of plant
and piping in the chemical, dyestuff, food pharmaceutical, petrochemical industries. Its
steadily growing use is due to many advantages over conventional materials.
Belzona Oil Presentation
The document discusses hidden threats in austenitic stainless steel piping used in a natural gas extraction plant. Stress corrosion cracking was found in welded regions of reinforcing pads and wear pads due to the presence of chlorides, causing severe cracking and leaks. To restore integrity, vessels were replaced and affected lines were repaired. A repair option involving replacing cracked original wear pads with larger cold-bonded stainless steel wear pads was chosen and implemented.
Defect analysis workshop
This document summarizes an X-ray inspection workshop that covered common defects seen in electronics manufacturing and how to identify them using X-ray imaging. The workshop discussed why X-ray inspection is used, suggested requirements for X-ray systems, and provided examples of defects like BGA opens, voids, cracks, and dendrites. Attendees were taught inspection procedures and criteria to evaluate components like BGAs, QFNs, and through-hole joints using X-ray imaging.
Custom Plastic Pipe Extrusions- Product Catalog
Download this catalog for custom plastic extrusions used in various industries with high quality materials in different sizes and colors.
London Residential | Case Study
33 London was awarded the contract to complete the design and refurbishment of a four-storey property in London. We worked very closely with our client, contractors and other specialists to create a project that responded to our clients’ brief.
Sample Residential Inspection Report
SUMMARY: This report provides a summary of the inspection of a residential property located at 56789 Winding River Road Loveland, CO which was conducted on July 30, 2012. The report notes that carbon monoxide detectors must be installed in all living areas prior to closing and that repairs are needed to cracks in the driveway, stonework, and stucco on the exterior of the home. Interior issues include a cracked window, lack of a closet, and the need for window screens. The heating system filter requires replacement and gutter extensions should be installed.
Case Study: Residential Site @ Prince Charles Crescent (22 Aug 2014)
Prepared by: Clarissa Chua, Dexter Sim, Jocelyn Ng, Lei Xiao and Sarah Tan
NUS Project: RE4204 - Advanced Real Estate Marketing 2014
CaseStudy-Beech
Deeside Timberframe was appointed by Beech Developments to construct 64 homes in Llandundo, North Wales. Deeside manufactured and installed timber frame kits for 10 different house styles at a rate of one unit per week over 52 weeks. The luxury development provided high quality, energy efficient housing through collaborative work between Deeside, the architects, client, and contractor.
Recommended
Goel Scientific General information and introduction
Borosilicate glass represents unmatched standardized glass for construction of plant
and piping in the chemical, dyestuff, food pharmaceutical, petrochemical industries. Its
steadily growing use is due to many advantages over conventional materials.
Belzona Oil Presentation
The document discusses hidden threats in austenitic stainless steel piping used in a natural gas extraction plant. Stress corrosion cracking was found in welded regions of reinforcing pads and wear pads due to the presence of chlorides, causing severe cracking and leaks. To restore integrity, vessels were replaced and affected lines were repaired. A repair option involving replacing cracked original wear pads with larger cold-bonded stainless steel wear pads was chosen and implemented.
Defect analysis workshop
This document summarizes an X-ray inspection workshop that covered common defects seen in electronics manufacturing and how to identify them using X-ray imaging. The workshop discussed why X-ray inspection is used, suggested requirements for X-ray systems, and provided examples of defects like BGA opens, voids, cracks, and dendrites. Attendees were taught inspection procedures and criteria to evaluate components like BGAs, QFNs, and through-hole joints using X-ray imaging.
Custom Plastic Pipe Extrusions- Product Catalog
Download this catalog for custom plastic extrusions used in various industries with high quality materials in different sizes and colors.
London Residential | Case Study
33 London was awarded the contract to complete the design and refurbishment of a four-storey property in London. We worked very closely with our client, contractors and other specialists to create a project that responded to our clients’ brief.
Sample Residential Inspection Report
SUMMARY: This report provides a summary of the inspection of a residential property located at 56789 Winding River Road Loveland, CO which was conducted on July 30, 2012. The report notes that carbon monoxide detectors must be installed in all living areas prior to closing and that repairs are needed to cracks in the driveway, stonework, and stucco on the exterior of the home. Interior issues include a cracked window, lack of a closet, and the need for window screens. The heating system filter requires replacement and gutter extensions should be installed.
Case Study: Residential Site @ Prince Charles Crescent (22 Aug 2014)
Prepared by: Clarissa Chua, Dexter Sim, Jocelyn Ng, Lei Xiao and Sarah Tan
NUS Project: RE4204 - Advanced Real Estate Marketing 2014
CaseStudy-Beech
Deeside Timberframe was appointed by Beech Developments to construct 64 homes in Llandundo, North Wales. Deeside manufactured and installed timber frame kits for 10 different house styles at a rate of one unit per week over 52 weeks. The luxury development provided high quality, energy efficient housing through collaborative work between Deeside, the architects, client, and contractor.
Schindler’s house
Rudolph Schindler designed the Schindler House in 1921-1922 in West Hollywood, California as a cooperative live/work space for two families. The house incorporates Schindler's "space architecture" philosophy through its use of concrete walls, sliding glass panels, and separation of interior spaces. At just under 3,500 square feet, the house sits on a 20,000 square foot lot and was constructed for a total cost of $12,550. The layout consists of two interlocking "L" shaped apartments, each with private and shared living and work spaces, demonstrating Schindler's modernist architectural theories through its industrial materials and spatial organization.
Full House Inspections Sample Report
The inspection report summarizes the inspection of a property located at 12345 Main St, Somewhere USA that was inspected on 10/6/2004 from 2:30 pm to 5:30 pm. The inspection found several components needing service, including the raised foundation which had moisture migration through the stem walls, desiccated soils in the crawlspace, and animal carcasses that should be removed. The chimney had loose bricks and mortar, a deteriorated crown, and was missing a weather cap. Windows in multiple rooms had broken hermetic seals. The kitchen counter top and sink connections needed caulking and sealing. The toilets and tub/shower surrounds needed recaulking as well.
Bps 5205 sustainability construction and maintainability velpandi & maria
Singapore heavily relies on conventional precast construction involving extensive use of precast planks, canopy beams, column & facade. The recent prefabrication trend, which is being increasingly used in the building industry, alleviating some of the environmental burdens associated with conventional construction. Several case studies were conducted on residential buildings in Singapore. The findings revealed that environmental, economic and social benefits of using prefabrication were significant when compared to conventional construction methods. This implies that a wider use of prefabrication techniques could contribute to sustainable construction in a dense urban environment on the other hand using precast components have adverse effects on the structure. Today, as much as 82% of Singaporeans live in public housing delivered by the HDB.HDB plans and develops public housing towns that provide Singaporeans with quality homes and living environments.
In the construction industry, construction defects and failures can occur during the design and construction phases of a project, or after a structure is substantially complete. However, while a design professional is responsible to produce complete, accurate and well-coordinated design and construction documents that are substantially free of defects; and a contractor is required to adhere to the design and construction documents, nothing built is ever perfect nor does the law require a perfect design. Furthermore, all buildings have an expected lifespan and even the structures of the ancient world will erode into a mound of sand given enough time. The eventual failure of a structure is an expected result rather than a manifestation of a construction defect. The question becomes what is a construction defect; how do defects arise; and how can defects be identified and managed?
A Case Study has been conducted to analyse Construction Defects on site, Remedial Measures & Preventable Practices at HDB Water Way Banks at Punggol East.
1.2. Objectives:
The objective of this case study aims to mitigate the defects to the future HDB projects. This project may help to HDB engineers for awareness regarding defects prevention practice. HDB has objectives, which expanding from time to time, Recently, HDB is not only functioning as a provider of basic shelter but also creates housing that can comply with the needs, necessities and aspirations for modern living days and futures. HDB objective is to provide affordable quality homes and develop vibrant living environment.
This case study has the following objectives of:
To investigate and identify the defects that appeared in the precast slab planks.
To identify the defects during construction progress, remedial measures & preventable practices propose better & quality living standards to the public.
Analysis and design of a multi storey reinforced concrete
This document provides details of the analysis and design of a multi-storey reinforced concrete building project. It includes the objectives, which are to analyze and design the main structural elements of the building including slabs, columns, shear walls, and foundations. It also summarizes the building being a 12-storey residential building in Gorakhpur, India. The document outlines the various structural elements that will be designed, including flat slab structural systems, column types and design, shear wall design, and pile foundation design.
High Rise Building Research Document
The Taipei Performing Arts Center in Taiwan elevates a substantial part of its program to create an open public square underneath. By lifting the main plateau, panoramic views of the city are created. The building contains more void space in the form of this three-dimensional urban square than mass. The square fundamentally becomes part of the building and is activated by various balconies and terraces with different programs. The four "legs" of the building that support the horizontal slab are each programmed differently and contain performance spaces at varying altitudes, connected by a system of loops, stairs, and elevators.
High-rise structural systems
This ppt is all about the high-rise structural systems and the methods of construction.
Hope, it will help you to get some information and knowledge.
Project proposal
The document proposes constructing a one-storey residential building to address the client's housing needs. It will include three bedrooms, two kitchens, and a porch. The building will cost approximately 1.15 million pesos to build and will solve the client's current problems of high rental costs and transportation expenses, while providing a comfortable living environment. Facility requirements like appliances, electricity, and water access are also addressed. The construction is proposed to alleviate the client's housing issues for many years.
DESIGN AND ANALAYSIS OF MULTI STOREY BUILDING USING STAAD PRO
This document discusses the design and analysis of a multi-storied residential building using STAAD Pro software. It includes details on the building specifications, applicable codes, loads on the structure, and the design of structural elements like slabs, beams, columns, and footings. The analysis involves assigning materials, loads, properties and performing RCC design in STAAD Pro to verify the safety and serviceability of the building according to codes. The results show the design is safe and meets code requirements. References include design codes and textbooks.
Site visit report
1) The document summarizes a site visit report for a construction project located in Kuala Lumpur, Malaysia.
2) The project involves constructing a 25-story mixed use building, with commercial space on the lower floors and residential units above.
3) During the site visit, students observed various construction materials, processes, and equipment to gain practical experience supplementing their classroom lessons. Safety precautions were also emphasized.
10 Project Proposal Writing
A series of modules on project cycle, planning and the logical framework, aimed at team leaders of international NGOs in developing countries.
New improved version of Writing Project Proposals in February 2014.
Structural systems in high rise buildings
This document discusses structural systems used in high-rise buildings. It defines high-rise buildings and outlines the increasing demand for them due to factors like land scarcity. It describes the development of structural systems from the first generation using stone, brick and cast iron to modern systems using steel and concrete. Interior structural systems discussed include rigid frames, shear walls and outrigger structures. Exterior systems include tube systems and diagrid systems that resist lateral loads through a rigid perimeter structure.
Tees
This document contains specifications for various parts including their thickness, diameter, quantity and other dimensions. It lists parts with one diameter labeled D1 along with their thickness, area, and other calculated values like C. It also lists parts that have two diameters, D1 and D2, along with thickness and other values for each diameter section. The parts come in various standard sizes and quantities.
Reducers
The document contains a table listing the size, dimensions, and quantities of various items. The table includes columns for dimensions D1 and D2, areas A, and costs C1 and C2. It lists the size, measurements, areas, costs, and quantities of different objects.
Elbows 1
This document contains technical specifications for pipes including their internal diameter (ID), outer diameter (OD), radius (R), circumference (C), average thickness, and quantity. The pipes are grouped into different sizes ranging from ID of 25 to 250 in increments of 25. The thickness ranges from 4.8 to 9.75 and quantities range from 1 to 120 per size.
Couplings
This document contains a table with data on different IDs, lengths, diameters, and quantities. The table has 10 rows listing IDs from 25 to 250, lengths from 32.5 to 97.5, diameters from 70 to 200, and quantities ranging from 2 to 50. Additional text provides labels and dimensions but no further context.
Collar
This document contains a table with specifications for different sizes of pipes including the outer diameter, two inner diameters, thickness, and quantity of each size. The pipes range in outer diameter from 25mm to 500mm, come in various quantities from 1 to 120, and the thickness increases with larger diameters.
More Related Content
Viewers also liked
Schindler’s house
Rudolph Schindler designed the Schindler House in 1921-1922 in West Hollywood, California as a cooperative live/work space for two families. The house incorporates Schindler's "space architecture" philosophy through its use of concrete walls, sliding glass panels, and separation of interior spaces. At just under 3,500 square feet, the house sits on a 20,000 square foot lot and was constructed for a total cost of $12,550. The layout consists of two interlocking "L" shaped apartments, each with private and shared living and work spaces, demonstrating Schindler's modernist architectural theories through its industrial materials and spatial organization.
Full House Inspections Sample Report
The inspection report summarizes the inspection of a property located at 12345 Main St, Somewhere USA that was inspected on 10/6/2004 from 2:30 pm to 5:30 pm. The inspection found several components needing service, including the raised foundation which had moisture migration through the stem walls, desiccated soils in the crawlspace, and animal carcasses that should be removed. The chimney had loose bricks and mortar, a deteriorated crown, and was missing a weather cap. Windows in multiple rooms had broken hermetic seals. The kitchen counter top and sink connections needed caulking and sealing. The toilets and tub/shower surrounds needed recaulking as well.
Bps 5205 sustainability construction and maintainability velpandi & maria
Singapore heavily relies on conventional precast construction involving extensive use of precast planks, canopy beams, column & facade. The recent prefabrication trend, which is being increasingly used in the building industry, alleviating some of the environmental burdens associated with conventional construction. Several case studies were conducted on residential buildings in Singapore. The findings revealed that environmental, economic and social benefits of using prefabrication were significant when compared to conventional construction methods. This implies that a wider use of prefabrication techniques could contribute to sustainable construction in a dense urban environment on the other hand using precast components have adverse effects on the structure. Today, as much as 82% of Singaporeans live in public housing delivered by the HDB.HDB plans and develops public housing towns that provide Singaporeans with quality homes and living environments.
In the construction industry, construction defects and failures can occur during the design and construction phases of a project, or after a structure is substantially complete. However, while a design professional is responsible to produce complete, accurate and well-coordinated design and construction documents that are substantially free of defects; and a contractor is required to adhere to the design and construction documents, nothing built is ever perfect nor does the law require a perfect design. Furthermore, all buildings have an expected lifespan and even the structures of the ancient world will erode into a mound of sand given enough time. The eventual failure of a structure is an expected result rather than a manifestation of a construction defect. The question becomes what is a construction defect; how do defects arise; and how can defects be identified and managed?
A Case Study has been conducted to analyse Construction Defects on site, Remedial Measures & Preventable Practices at HDB Water Way Banks at Punggol East.
1.2. Objectives:
The objective of this case study aims to mitigate the defects to the future HDB projects. This project may help to HDB engineers for awareness regarding defects prevention practice. HDB has objectives, which expanding from time to time, Recently, HDB is not only functioning as a provider of basic shelter but also creates housing that can comply with the needs, necessities and aspirations for modern living days and futures. HDB objective is to provide affordable quality homes and develop vibrant living environment.
This case study has the following objectives of:
To investigate and identify the defects that appeared in the precast slab planks.
To identify the defects during construction progress, remedial measures & preventable practices propose better & quality living standards to the public.
Analysis and design of a multi storey reinforced concrete
This document provides details of the analysis and design of a multi-storey reinforced concrete building project. It includes the objectives, which are to analyze and design the main structural elements of the building including slabs, columns, shear walls, and foundations. It also summarizes the building being a 12-storey residential building in Gorakhpur, India. The document outlines the various structural elements that will be designed, including flat slab structural systems, column types and design, shear wall design, and pile foundation design.
High Rise Building Research Document
The Taipei Performing Arts Center in Taiwan elevates a substantial part of its program to create an open public square underneath. By lifting the main plateau, panoramic views of the city are created. The building contains more void space in the form of this three-dimensional urban square than mass. The square fundamentally becomes part of the building and is activated by various balconies and terraces with different programs. The four "legs" of the building that support the horizontal slab are each programmed differently and contain performance spaces at varying altitudes, connected by a system of loops, stairs, and elevators.
High-rise structural systems
This ppt is all about the high-rise structural systems and the methods of construction.
Hope, it will help you to get some information and knowledge.
Project proposal
The document proposes constructing a one-storey residential building to address the client's housing needs. It will include three bedrooms, two kitchens, and a porch. The building will cost approximately 1.15 million pesos to build and will solve the client's current problems of high rental costs and transportation expenses, while providing a comfortable living environment. Facility requirements like appliances, electricity, and water access are also addressed. The construction is proposed to alleviate the client's housing issues for many years.
DESIGN AND ANALAYSIS OF MULTI STOREY BUILDING USING STAAD PRO
This document discusses the design and analysis of a multi-storied residential building using STAAD Pro software. It includes details on the building specifications, applicable codes, loads on the structure, and the design of structural elements like slabs, beams, columns, and footings. The analysis involves assigning materials, loads, properties and performing RCC design in STAAD Pro to verify the safety and serviceability of the building according to codes. The results show the design is safe and meets code requirements. References include design codes and textbooks.
Site visit report
1) The document summarizes a site visit report for a construction project located in Kuala Lumpur, Malaysia.
2) The project involves constructing a 25-story mixed use building, with commercial space on the lower floors and residential units above.
3) During the site visit, students observed various construction materials, processes, and equipment to gain practical experience supplementing their classroom lessons. Safety precautions were also emphasized.
10 Project Proposal Writing
A series of modules on project cycle, planning and the logical framework, aimed at team leaders of international NGOs in developing countries.
New improved version of Writing Project Proposals in February 2014.
Structural systems in high rise buildings
This document discusses structural systems used in high-rise buildings. It defines high-rise buildings and outlines the increasing demand for them due to factors like land scarcity. It describes the development of structural systems from the first generation using stone, brick and cast iron to modern systems using steel and concrete. Interior structural systems discussed include rigid frames, shear walls and outrigger structures. Exterior systems include tube systems and diagrid systems that resist lateral loads through a rigid perimeter structure.
Viewers also liked (12)
Bps 5205 sustainability construction and maintainability velpandi & maria
Bps 5205 sustainability construction and maintainability velpandi & maria
Analysis and design of a multi storey reinforced concrete
Analysis and design of a multi storey reinforced concrete
DESIGN AND ANALAYSIS OF MULTI STOREY BUILDING USING STAAD PRO
DESIGN AND ANALAYSIS OF MULTI STOREY BUILDING USING STAAD PRO
More from Rentu Philipose
Tees
This document contains specifications for various parts including their thickness, diameter, quantity and other dimensions. It lists parts with one diameter labeled D1 along with their thickness, area, and other calculated values like C. It also lists parts that have two diameters, D1 and D2, along with thickness and other values for each diameter section. The parts come in various standard sizes and quantities.
Reducers
The document contains a table listing the size, dimensions, and quantities of various items. The table includes columns for dimensions D1 and D2, areas A, and costs C1 and C2. It lists the size, measurements, areas, costs, and quantities of different objects.
Elbows 1
This document contains technical specifications for pipes including their internal diameter (ID), outer diameter (OD), radius (R), circumference (C), average thickness, and quantity. The pipes are grouped into different sizes ranging from ID of 25 to 250 in increments of 25. The thickness ranges from 4.8 to 9.75 and quantities range from 1 to 120 per size.
Couplings
This document contains a table with data on different IDs, lengths, diameters, and quantities. The table has 10 rows listing IDs from 25 to 250, lengths from 32.5 to 97.5, diameters from 70 to 200, and quantities ranging from 2 to 50. Additional text provides labels and dimensions but no further context.
Collar
This document contains a table with specifications for different sizes of pipes including the outer diameter, two inner diameters, thickness, and quantity of each size. The pipes range in outer diameter from 25mm to 500mm, come in various quantities from 1 to 120, and the thickness increases with larger diameters.
Blind flange
The document appears to be a table listing technical specifications for a manufactured part including its outer diameter, pitch circle diameter, thread type, height and quantity ordered. It shows an order was placed for 120 pieces of a part that has an outer diameter of 50, a pitch circle diameter of 153, is a 121 thread type, with a height of 32.5 and 19 threads,
More from Rentu Philipose (11)
Recently uploaded
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
BRAIN TUMOR DETECTION for seminar ppt.pdf
BRAIN TUMOR DETECTION
AND CLASSIFICATION USING
ARTIFICIAL INTELLIGENCE
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Design and optimization of ion propulsion drone
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Recently uploaded (20)
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Site inspection report
- 1. CLIENT PROJECT Fiberpipe Hamon Daelim 1 Verification of DN 900 spools All spool pieces of DN 900 is available as per the drawing. 2 Verification of smaller diameter spool pieces All are as per the drawing and the requirement. 3 Bonding material at the inside Specification states that extra material should be there to identify the completeness of the bonding. 4 Shortage of spool pieces Shortage will be re-supplied. 5 Shortage of nut-bolts (331 pcs) Shortage will be re-supplied. 6 Outside bonding material The outside material is technically correct as it indicates complete bonding of the joints.. 7 Repair procedure for removal of the bonding material at the inside. Repairing at the inside is not advisable and it may invoke cracks in the cured bondings. Any extra material will be removed by the flow at the initial testing of the spool pieces and the spool becomes sychronised with the system. Repair procedure will be submitted Invoice will be raised Invoice will be raised SITE INSPECTION REPORT DAELIM dated-05/02/2015 to 06/02/2015 FRP SPOOLS FOR FGD SYSTEM FOR O MON TPP Sl No Description Observation Position Signatures if closed