LEV in developing economies for slideshareMike Slater
Presentation to BOHS / OHSI Exposure Control and Containment Conference in Liverpool October 2016. Explores the challenges of designing and implementing local exhaust ventilation systems to control worker exposure to dust in developing economies
Managing Health in Construction – What Good Looks Like Mike Slater
Managing Health in Construction – What Good Looks Like
A presentation made at the Health and Wellbeing event at the NEC Birmingham on 9 March 2016
#breathefreely #bohsworld
Occupational cancer what you need to knowMike Slater
Approximately 8,000 workers die every year in Great Britain from occupational cancer. Controlling exposure to carcinogens at work involves recognizing hazards, evaluating exposures, and controlling them. The hierarchy of control recommends prevention through engineering controls, work practices, and personal protective equipment in order of preference. Occupational hygienists can help employers implement controls and locate guidance to address cancer risks like asbestos, silica, and diesel exhaust.
- Construction workers face significant health risks from exposure to silica dust, which can lead to fatal lung diseases like silicosis. Over 500 workers in the UK are estimated to die from silica exposure each year.
- Exposure measurement studies show that workers performing tasks like drilling, demolition, and concrete grinding often experience respirable silica exposures above the UK limit of 0.1 mg/m3. Long-term or high-level exposures increase the risk of developing silicosis.
- Effective dust control measures during tasks that generate silica dust, such as using water sprays or extraction tools, are needed to reduce worker exposures and health risks from silica.
The document discusses occupational lung disease in the construction industry. It notes that around 3,000 construction workers suffer from breathing or lung problems caused or exacerbated by their work each year. Common causes of occupational lung disease in construction include asbestos, silica dust, wood dust, welding fumes, paint fumes, and diesel exhaust. The document provides tips for reducing risk, such as using dust suppression techniques, proper ventilation, and personal protective equipment. The overall message is that occupational lung disease remains a significant problem and concerted efforts are needed to control exposures and prevent cases.
This document discusses occupational exposure to industrial dust, including an estimated 9.2 million workers exposed in the UK. Dust exposure can occur through handling powders, cutting materials, and disturbing settled dust. Health effects include respiratory diseases, irritation, fibrosis, COPD, asthma, and lung cancer. Evaluating risks involves initial and detailed surveys. Studies on brick making and stone cutting found many workers exposed to respirable crystalline silica above recommended limits. Risk of silicosis increases significantly with exposure levels over 15 years. Controlling dust involves prevention through engineering solutions, work practices like wet cutting, PPE, and measures like exposure time reduction, supervision, training and health surveillance.
LEV in developing economies for slideshareMike Slater
Presentation to BOHS / OHSI Exposure Control and Containment Conference in Liverpool October 2016. Explores the challenges of designing and implementing local exhaust ventilation systems to control worker exposure to dust in developing economies
Managing Health in Construction – What Good Looks Like Mike Slater
Managing Health in Construction – What Good Looks Like
A presentation made at the Health and Wellbeing event at the NEC Birmingham on 9 March 2016
#breathefreely #bohsworld
Occupational cancer what you need to knowMike Slater
Approximately 8,000 workers die every year in Great Britain from occupational cancer. Controlling exposure to carcinogens at work involves recognizing hazards, evaluating exposures, and controlling them. The hierarchy of control recommends prevention through engineering controls, work practices, and personal protective equipment in order of preference. Occupational hygienists can help employers implement controls and locate guidance to address cancer risks like asbestos, silica, and diesel exhaust.
- Construction workers face significant health risks from exposure to silica dust, which can lead to fatal lung diseases like silicosis. Over 500 workers in the UK are estimated to die from silica exposure each year.
- Exposure measurement studies show that workers performing tasks like drilling, demolition, and concrete grinding often experience respirable silica exposures above the UK limit of 0.1 mg/m3. Long-term or high-level exposures increase the risk of developing silicosis.
- Effective dust control measures during tasks that generate silica dust, such as using water sprays or extraction tools, are needed to reduce worker exposures and health risks from silica.
The document discusses occupational lung disease in the construction industry. It notes that around 3,000 construction workers suffer from breathing or lung problems caused or exacerbated by their work each year. Common causes of occupational lung disease in construction include asbestos, silica dust, wood dust, welding fumes, paint fumes, and diesel exhaust. The document provides tips for reducing risk, such as using dust suppression techniques, proper ventilation, and personal protective equipment. The overall message is that occupational lung disease remains a significant problem and concerted efforts are needed to control exposures and prevent cases.
This document discusses occupational exposure to industrial dust, including an estimated 9.2 million workers exposed in the UK. Dust exposure can occur through handling powders, cutting materials, and disturbing settled dust. Health effects include respiratory diseases, irritation, fibrosis, COPD, asthma, and lung cancer. Evaluating risks involves initial and detailed surveys. Studies on brick making and stone cutting found many workers exposed to respirable crystalline silica above recommended limits. Risk of silicosis increases significantly with exposure levels over 15 years. Controlling dust involves prevention through engineering solutions, work practices like wet cutting, PPE, and measures like exposure time reduction, supervision, training and health surveillance.
Presentation to the Australian Institute of Occupational Hygienists (AIOH) conference in Canberra December 2017 about the BOHS led Breathe Freely campaign to prevent respiratory disease in the construction and manufacturing industries. What lessons have been learned?
Lifting the load - reducing the burden of occupational disease in the ukMike Slater
The document discusses occupational diseases in the UK construction industry. It notes that while 39 workers fatally in construction accidents in 2012-2013, occupational diseases pose a much larger burden, with an estimated 13,000 deaths per year from work-related illness. Major causes of occupational illness include asbestos exposure (almost 5000 deaths/year), silica exposure (1000 new cancer cases/year), and diesel exhaust exposure (1000 cancer cases/year). The document calls for continued efforts from organizations like the HSE, employers, unions, and occupational hygienists to recognize health hazards, evaluate exposures, control risks, and prevent occupational illness through engineering solutions, work practices, and PPE.
This document provides health and safety advice for stonemasons regarding silica dust. It discusses how respirable crystalline silica (RCS) is found in many types of rock and stone. Exposure to RCS dust particles can lead to serious lung diseases like silicosis and lung cancer. The highest risk is from freshly fractured fine RCS particles generated during tasks like drilling, cutting, and grinding. The current workplace exposure limit for RCS is 0.1mg/m3. Control methods include suppressing, collecting, and containing dust through techniques like water sprays, ventilation, and encapsulation. Respiratory protective equipment is also important but should only be used as a last resort. Maintaining controls and conducting
Reducing the burden of occupational disease for slideshareMike Slater
The document discusses occupational diseases and their impact. It notes that there are approximately 12,000 deaths each year due to occupational respiratory diseases, equivalent to 30 Boeing 777 planes full of passengers. An estimated 1.1 million people in 2011-12 were suffering from work-related illnesses. Some of the main causes of occupational diseases mentioned include silica exposure from stone cutting, bakers having higher rates of asthma, and potential issues from new technologies like nanotechnology, fracking, and recycling. It argues that occupational hygienists have skills to help develop solutions to reduce these diseases and protect workers.
Who are "World Health Without Borders?" - presentation given at a meeting held at the International Occupational Hygiene Association Conference in London, April 2015
The document discusses Dustcontrol, a Swedish company that produces dust extraction vacuums for construction sites. It describes Dustcontrol's history and product range, which includes vacuums of varying sizes suitable for different tasks. The document emphasizes the importance of dust control for health and safety reasons, particularly the risk of silicosis from respirable crystalline silica dust. It explains Dustcontrol vacuums' triple filtration system and other features that make them effective at capturing dust particles.
Webinar occupational hygiene in a changing worldMike Slater
Presentation from the webinars held on 24 January 2014. BOHS President elect, Mike Slater. discusses some of the issues facing occupational / industrial hygienists across the world with some ideas about the implications and how occupational hygiene professionals could respond.
The document discusses hazards associated with lead and silica exposure on construction sites. Lead is commonly found in construction materials like paint, alloyed metals, mortars, and can be exposed during activities like grinding, cutting or welding. Exposure to lead can occur through inhalation, ingestion or skin absorption and can cause health effects like lead poisoning. The document outlines steps employers should take to assess lead exposure risks and comply with OSHA requirements. Silica exposure is also common in construction and can cause silicosis, a serious lung disease. Tasks like cutting concrete and sandblasting can release silica dust which is inhaled. The document recommends ways to control silica exposure like substituting less hazardous materials, using water controls and
Silica is a mineral found in many materials like glass and sand. Repeated exposure to crystalline silica dust can cause serious illnesses like silicosis and lung cancer. Employers must implement controls like ventilation, work practices, hygiene facilities and monitoring to limit worker exposure and comply with regulatory limits. A complete silica control program uses engineering, administrative and personal protective equipment controls along with air monitoring, training and medical surveillance.
Atlantic Training has a large list of EHS training titles, from HR topics to construction topics, to general safety training, we can do it all and in a multitiude of formats.
This document provides an overview of lead awareness training requirements including the health hazards of lead exposure, ways lead enters the body, permissible exposure limits, medical surveillance programs, engineering controls, and protective measures to reduce lead exposure. Key topics covered include common products and industries that use lead, signs and symptoms of overexposure, blood tests to monitor body lead levels, and requirements for temporary medical removal from work if exposure levels are too high.
Manchester Offices + Workspace Update - 5plus Architects Place North West
The document discusses how technological advancements and changing work patterns are outpacing the development of physical workspaces. It notes that jobs are being displaced by automation while new types of jobs are being created. The key drivers for change in the workplace are identified as technology, economic value and return on investment, long-term adaptability and sustainability, focus on people's experience and wellbeing, and driving creativity and productivity. Metrics related to health, such as absenteeism, performance, and sleep, are presented. Finally, the document discusses ensuring buildings are effective, sustainable, and adaptable to contribute positively to society into the future.
IRJET- Occupational Health and Safety in Cement IndustryIRJET Journal
This document discusses occupational health and safety issues in the cement industry. It begins by outlining some of the main health hazards workers face, such as exposure to dust, gases, and fumes which can cause respiratory and other diseases over time. It then describes the results of a study conducted on 100 cement industry workers which found high rates of respiratory symptoms and acute ventilatory effects from dust exposure. The document concludes that controlling dust levels and providing proper safety equipment like masks are needed to protect worker health.
Global trading partners can learn from the example of the New Zealand dairy industry in proactively addressing combustible dust hazards that are present in the milk powder production process during spray drying applications.
A Risk Assessment Study on Occupational Hazards in Cement IndustryIRJET Journal
This document summarizes a risk assessment study of occupational hazards in the cement industry. It identifies major hazards like fires, toxic gas releases, explosions, and corrosion. It examines a cement plant in India, studying physical health issues, noise exposure, and ergonomic risks to workers. Guidelines are provided to management on controlling health problems and improving workplace safety, such as monitoring hazards, providing protective equipment, training workers, and engineering controls to reduce risks.
Particles & Filtration; Healthcare Construction CertificationMartyRayToo
This document summarizes information about particulate matter and filtration in healthcare settings. It defines particulate matter and different size ranges. It discusses health effects of particulate matter exposure. It also describes the four main mechanisms of filtration: sieving, impingement, interception, and diffusion. The document provides information on rating systems for air filters like MERV and definitions of HEPA and ULPA filters. It concludes with guidance on filter selection in healthcare facilities.
Presentation to the Australian Institute of Occupational Hygienists (AIOH) conference in Canberra December 2017 about the BOHS led Breathe Freely campaign to prevent respiratory disease in the construction and manufacturing industries. What lessons have been learned?
Lifting the load - reducing the burden of occupational disease in the ukMike Slater
The document discusses occupational diseases in the UK construction industry. It notes that while 39 workers fatally in construction accidents in 2012-2013, occupational diseases pose a much larger burden, with an estimated 13,000 deaths per year from work-related illness. Major causes of occupational illness include asbestos exposure (almost 5000 deaths/year), silica exposure (1000 new cancer cases/year), and diesel exhaust exposure (1000 cancer cases/year). The document calls for continued efforts from organizations like the HSE, employers, unions, and occupational hygienists to recognize health hazards, evaluate exposures, control risks, and prevent occupational illness through engineering solutions, work practices, and PPE.
This document provides health and safety advice for stonemasons regarding silica dust. It discusses how respirable crystalline silica (RCS) is found in many types of rock and stone. Exposure to RCS dust particles can lead to serious lung diseases like silicosis and lung cancer. The highest risk is from freshly fractured fine RCS particles generated during tasks like drilling, cutting, and grinding. The current workplace exposure limit for RCS is 0.1mg/m3. Control methods include suppressing, collecting, and containing dust through techniques like water sprays, ventilation, and encapsulation. Respiratory protective equipment is also important but should only be used as a last resort. Maintaining controls and conducting
Reducing the burden of occupational disease for slideshareMike Slater
The document discusses occupational diseases and their impact. It notes that there are approximately 12,000 deaths each year due to occupational respiratory diseases, equivalent to 30 Boeing 777 planes full of passengers. An estimated 1.1 million people in 2011-12 were suffering from work-related illnesses. Some of the main causes of occupational diseases mentioned include silica exposure from stone cutting, bakers having higher rates of asthma, and potential issues from new technologies like nanotechnology, fracking, and recycling. It argues that occupational hygienists have skills to help develop solutions to reduce these diseases and protect workers.
Who are "World Health Without Borders?" - presentation given at a meeting held at the International Occupational Hygiene Association Conference in London, April 2015
The document discusses Dustcontrol, a Swedish company that produces dust extraction vacuums for construction sites. It describes Dustcontrol's history and product range, which includes vacuums of varying sizes suitable for different tasks. The document emphasizes the importance of dust control for health and safety reasons, particularly the risk of silicosis from respirable crystalline silica dust. It explains Dustcontrol vacuums' triple filtration system and other features that make them effective at capturing dust particles.
Webinar occupational hygiene in a changing worldMike Slater
Presentation from the webinars held on 24 January 2014. BOHS President elect, Mike Slater. discusses some of the issues facing occupational / industrial hygienists across the world with some ideas about the implications and how occupational hygiene professionals could respond.
The document discusses hazards associated with lead and silica exposure on construction sites. Lead is commonly found in construction materials like paint, alloyed metals, mortars, and can be exposed during activities like grinding, cutting or welding. Exposure to lead can occur through inhalation, ingestion or skin absorption and can cause health effects like lead poisoning. The document outlines steps employers should take to assess lead exposure risks and comply with OSHA requirements. Silica exposure is also common in construction and can cause silicosis, a serious lung disease. Tasks like cutting concrete and sandblasting can release silica dust which is inhaled. The document recommends ways to control silica exposure like substituting less hazardous materials, using water controls and
Silica is a mineral found in many materials like glass and sand. Repeated exposure to crystalline silica dust can cause serious illnesses like silicosis and lung cancer. Employers must implement controls like ventilation, work practices, hygiene facilities and monitoring to limit worker exposure and comply with regulatory limits. A complete silica control program uses engineering, administrative and personal protective equipment controls along with air monitoring, training and medical surveillance.
Atlantic Training has a large list of EHS training titles, from HR topics to construction topics, to general safety training, we can do it all and in a multitiude of formats.
This document provides an overview of lead awareness training requirements including the health hazards of lead exposure, ways lead enters the body, permissible exposure limits, medical surveillance programs, engineering controls, and protective measures to reduce lead exposure. Key topics covered include common products and industries that use lead, signs and symptoms of overexposure, blood tests to monitor body lead levels, and requirements for temporary medical removal from work if exposure levels are too high.
Manchester Offices + Workspace Update - 5plus Architects Place North West
The document discusses how technological advancements and changing work patterns are outpacing the development of physical workspaces. It notes that jobs are being displaced by automation while new types of jobs are being created. The key drivers for change in the workplace are identified as technology, economic value and return on investment, long-term adaptability and sustainability, focus on people's experience and wellbeing, and driving creativity and productivity. Metrics related to health, such as absenteeism, performance, and sleep, are presented. Finally, the document discusses ensuring buildings are effective, sustainable, and adaptable to contribute positively to society into the future.
IRJET- Occupational Health and Safety in Cement IndustryIRJET Journal
This document discusses occupational health and safety issues in the cement industry. It begins by outlining some of the main health hazards workers face, such as exposure to dust, gases, and fumes which can cause respiratory and other diseases over time. It then describes the results of a study conducted on 100 cement industry workers which found high rates of respiratory symptoms and acute ventilatory effects from dust exposure. The document concludes that controlling dust levels and providing proper safety equipment like masks are needed to protect worker health.
Global trading partners can learn from the example of the New Zealand dairy industry in proactively addressing combustible dust hazards that are present in the milk powder production process during spray drying applications.
A Risk Assessment Study on Occupational Hazards in Cement IndustryIRJET Journal
This document summarizes a risk assessment study of occupational hazards in the cement industry. It identifies major hazards like fires, toxic gas releases, explosions, and corrosion. It examines a cement plant in India, studying physical health issues, noise exposure, and ergonomic risks to workers. Guidelines are provided to management on controlling health problems and improving workplace safety, such as monitoring hazards, providing protective equipment, training workers, and engineering controls to reduce risks.
Particles & Filtration; Healthcare Construction CertificationMartyRayToo
This document summarizes information about particulate matter and filtration in healthcare settings. It defines particulate matter and different size ranges. It discusses health effects of particulate matter exposure. It also describes the four main mechanisms of filtration: sieving, impingement, interception, and diffusion. The document provides information on rating systems for air filters like MERV and definitions of HEPA and ULPA filters. It concludes with guidance on filter selection in healthcare facilities.
Occupational hygiene aims to prevent illness caused by workplace hazards. It does this through recognizing, evaluating, and controlling hazardous agents via a multidisciplinary approach involving chemistry, toxicology, physics, biology, engineering, and law. Hazards include chemicals, physical agents like noise and vibration, biological agents, and ergonomic risks. Risk is determined by assessing the hazard and level of worker exposure. Controls follow a hierarchy starting with eliminating or substituting the hazard, then using engineering controls, administrative controls like safe work practices, and finally personal protective equipment. Occupational hygienists play a key role in anticipating hazards, conducting exposure assessments, and advising on prevention strategies to protect worker health.
Understanding what airborne dust is, its potential health effects and how to manage dust in all areas of the workplace is fundamental to ensure that the respiratory health of your workforce is protected.
Generating potentially harmful levels of respirable airborne dust is not confined to production-based tasks within an operation. Engineering and maintenance tasks also have the potential to expose tradesmen and operators to respirable dust that can cause lung disease. Many of these tasks are also often conducted without the need for respiratory protection being taken into consideration.
Occupational dust disease is 100% preventable, and the key to workers making smart choices about their health is education.
This presentation is a generic version of the Airborne Dust Awareness sessions that have been rolled out to thousands of mineworkers in the NSW coal industry recently and has resulted in positive behavioural change in and around the workplace.
As industry leaders, we all need to understand the risks before we can identify them, then eliminate or control them.
What is your level of airborne dust awareness?
This document provides information about cleanrooms. It defines a cleanroom as an environment with strictly controlled levels of environmental pollutants like dust, microbes, and chemicals. Cleanrooms are important in manufacturing areas that are sensitive to contamination, like microelectronics, pharmaceuticals, and biotechnology. The document discusses cleanroom classifications according to particle levels, airflow principles, personnel contamination control measures, and a brief history of the development of modern cleanrooms.
Air pollution prevention and control lecture 2018mangowekesa
The document discusses various strategies for air pollution prevention and control, with a focus on strategies for controlling nitrogen oxides (NOx) and sulfur dioxide (SO2) emissions. It describes several methods for NOx control including fuel denitrogenation, combustion modification, selective catalytic reduction, and selective non-catalytic reduction. For SO2 control it discusses flue gas desulfurization systems like limestone scrubbing, lime scrubbing, and spray drying, as well as changing to lower sulfur fuels. The document provides details on the chemistry and processes involved in different pollution control methods.
The document discusses various pollution prevention strategies and air pollution control methods. It defines pollution prevention as eliminating or reducing waste at the source before it is generated. Common pollution prevention approaches include product changes, input material changes, equipment/process modifications, and good operating practices. The document also describes various air pollution control methods such as absorption, adsorption, oxidation, particulate controls like baghouses and electrostatic precipitators, and flue gas desulfurization systems.
Pollutants,pollution and control in textile industrymadhu rani
This document discusses pollutants, pollution, and control in the textile industry. It notes that the textile industry uses large amounts of water and various chemicals in its dyeing and finishing processes, which can pollute the environment. Water pollution from the industry can affect both humans and aquatic life through toxic discharges. Air pollution also occurs from processes like coating fabrics. The document outlines various effluent treatment methods to control water pollution, including physical, chemical and biological methods. It also discusses ways to prevent air pollution, such as proper training, chimney height regulations, and filtration systems. The conclusion emphasizes the importance of environmental protection and safety regulations for workers.
This document provides information from a 2017 Cal/OSHA training on respirable crystalline silica. It can be found in many construction materials like concrete, rock, and sandstone. Exposure can cause serious lung diseases like silicosis and lung cancer. New OSHA standards specify exposure control methods and required respiratory protection for tasks involving silica-containing materials. Employers must assess employee exposures and follow controls to limit respirable silica levels.
How dust control polymers can revive the mining industry (1).pdfEnvirotac Inc.
Soil stabilizers are materials or chemical additives that are added to soil to enhance its physical qualities, making it more appropriate for construction, road construction, and other industrial purposes
Mistop is a natural alternative for reducing acid mist that forms during copper electrowinning processes. It is a non-ionic surfactant made from the Quillaja saponaria tree that lowers the surface tension of electrolytes, decreasing the force of bubbles exploding and reducing mist formation. Field tests show Mistop can decrease total aerosol levels by over 50% without affecting solvent extraction or electrowinning. As a natural product, Mistop is biodegradable and poses no safety or environmental risks for plant operations or personnel.
Greentech commercial air surface purifiers from Cleanworld.caPhil Shames
PureAir Commercial Air Purifiers made by Greentech Environmental and sold by Cleanworld.ca are far superior to air purifiers that simply filter the air.
PureAir air and surface purifiers emit particles that are effective against viruses, bacteria, mold, mildew, and allergens.
This document outlines the commercial line of air and surface purifiers offered. It also includes an independent lab report that outlines the effectiveness of the technology.
The document summarizes the results of plasma vitrification trials conducted on surrogate intermediate level radioactive waste. The trials demonstrated over 95% retention of cesium in the vitrified wasteform and over 60% volume reduction. Flexibility in treating different waste streams was shown, along with the potential for increased storage efficiency through process modifications. The technology was demonstrated at a pilot plant scale and has generated interest from UK nuclear industry organizations.
SMT - Extraction and Filtration Technology Importanceマルセロ 白井
This document discusses the importance of extraction and filtration technology in manufacturing environments. It notes that as manufacturing processes have become more complex, pollutants have gotten smaller and more hazardous to human and equipment health. Extraction and filtration technology is needed to capture these pollutants and protect workers as well as comply with regulations. It provides an overview of the challenges in capturing different types of airborne substances and the factors that extraction systems must address, such as adapting to the particular contaminants produced and the work environments.
Air sampling data from the OSHA IMIS database was analyzed for exposures in general industry, construction, and other industries within OSHA's jurisdiction. The results were surprising in that the average exposure in most major groups was within the suggested NIOSH REL. The results indicate that the ACGIH TLV should be used as the action level and the NIOSH REL should be used as the new OSHA PEL. Further interventions are needed to reduce exposures in manufacture and construction. However, there are several surprising outcomes in agriculture and logging industries from soils. Reducing the exposure will further reduce the risk of silicosis, lung cancer, COPD, and kidney disease.
What are the possible exposure sources?
Crystalline silica can be found in certain types of natural materials, such as:
• Sand
• Soil and rock
• Gravel
• Sandstone
• Slate
• Granite
• Clay
Individual work tasks and business operations vary from industry to industry as well as within each industry. OSHA has collected a wealth of industrial hygiene sample data prior to the change in collection methods. We looked at the OSHA data to determine where the risks occurred within each industry. The results were surprising and the level of effort to inform workers was limited at the same time. Since our investigation, the occupational exposure limits have also changed so we compared the past data sets to the new exposure limits. There were even more surprised in our analysis.
This document discusses various particulate sampling methods including sedimentation, filtration, impingement, electrostatic precipitation, thermal precipitation, centrifugal, and solution impingers. Sedimentation is the simplest method to collect particles larger than 10 microns. Filtration uses filtration to quantitatively remove particles from an air stream. Impingement separates particles from an air stream through collision against a surface. Electrostatic precipitation uses electric charges to collect submicron particles. Thermal precipitation uses temperature gradients to migrate particles to collection surfaces. Centrifugal methods use cyclones to separate particles via centrifugal forces. Solution impingers collect particles directly in acidic solutions.
This document discusses air filtration as an energy conservation measure. It summarizes that dynamic air cleaners can significantly reduce sub-micron particles, pathogens, and VOCs while reducing energy consumption and maintenance costs compared to high efficiency passive filters. A case study shows that replacing filters with dynamic air cleaners resulted in over 57,000 kWh in annual energy savings and a payback period of less than 2.2 years. Dynamic air cleaners are recommended for applications using high efficiency filters or in buildings with high occupant densities.
Similar to Silica healthy lungs summit 2017 11 (20)
Heat stress for bohs west midlands 2018 09Mike Slater
This document discusses heat stress risks at work and provides guidance on managing those risks. It defines heat-related illnesses like heat stroke and heat exhaustion. It explains factors that contribute to heat stress like temperature, humidity, radiation and airflow. Methods for assessing heat stress risks are presented, including the WBGT index and physiological monitoring. Controls to reduce heat stress are covered, through a hierarchy of prevention, engineering solutions, work practices, personal protection and management measures. Case studies demonstrate applying the guidance.
Ioha2015 building awareness for slideshareMike Slater
An introduction to the BOHS led "Breathefreely" initiative. Working together to reduce respiratory disease in the construction industry. Presentation given at the IOHA2015 conference in London in April
This document discusses protecting worker health in various industries. It notes that while 39 workers fatally in construction in 2012/13, occupational exposures also lead to many non-fatal illnesses. Each year there are an estimated 31,000 new cases of work-related ill health in construction, 3,700 occupational cancer cases, and over 500 deaths from silica exposure alone. The broader picture shows approximately 13,000 occupational disease deaths annually in the UK. Various industries like stonemasonry, welding, painting, and recycling expose workers to hazardous substances that can cause cancer, respiratory disease, and other illnesses. The document advocates for prevention through engineering controls, safe work practices, protective equipment, and proper management of occupational health and safety programs.
This document discusses managing risks from heat stress at work. It explains that human beings naturally produce body heat through physical activity, and must lose heat to the environment to regulate body temperature. However, high environmental temperatures, humidity, radiant heat, and other factors can increase heat stress risks. Left unmanaged, heat stress can cause illnesses ranging from heat cramps to heat stroke. The document outlines factors to consider in assessing heat stress risks, such as air temperature, humidity, clothing, metabolic rate, and acclimatization. It then discusses methods for evaluating risk levels, such as the WBGT index and physiological monitoring. Finally, it presents a hierarchy of controls for preventing and mitigating heat stress risks through engineering solutions, work
Slides from my presentation at the Occupational Hygiene Society of Ireland Society Conference 2014.
The slides on their own don't make a lot of sense - for speakers notes see http://www.slideshare.net/mikeslater/presentation-design-slides-for-web
Slides with speaker's notes from the Presentation on "Presentation Design" given at the Occupational Hygiene Society of Ireland Conference on 20 February 2014
The document provides tips for designing effective presentations. It notes that presentations come in many forms, from reporting results to management to conference speeches. Good presentations have clear objectives, appropriate content for the time available, and engage the audience. Effective visual materials like slides should enhance the speaker's message, not serve as a script. The document outlines best practices for slide design, including using visuals over text and limiting content to key points. It also advises that handouts expand on the presentation instead of duplicating slides verbatim. Overall, the tips emphasize preparation, clear and concise visual aids, and audience engagement.
Increasing our influence and making a differenceMike Slater
Presentation from BOHS President-Elect meetings. Outlines the extent of deaths in Great Britain from accidents at work and occupational ill-health and discusses how BOHS can respond to increase the Society's impact and influence
Sampling for sulphuric acid mist version for slideshareMike Slater
This document discusses occupational hygiene and measuring exposure to hazardous substances like sulphuric acid mist. It explains that a new workplace exposure limit has been set for the thoracic fraction of sulphuric acid mist. Two options for measuring exposure are discussed: 1) sampling the inhalable fraction, which would overestimate thoracic exposure but may still indicate if the limit is exceeded, and 2) developing a validated method for directly measuring the thoracic fraction, which would be expensive. Interpreting exposure measurement results and correcting for background also need consideration.
Promoting Wellbeing - Applied Social Psychology - Psychology SuperNotesPsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
Clinic ^%[+27633867063*Abortion Pills For Sale In Tembisa Central19various
Clinic ^%[+27633867063*Abortion Pills For Sale In Tembisa Central Clinic ^%[+27633867063*Abortion Pills For Sale In Tembisa CentralClinic ^%[+27633867063*Abortion Pills For Sale In Tembisa CentralClinic ^%[+27633867063*Abortion Pills For Sale In Tembisa CentralClinic ^%[+27633867063*Abortion Pills For Sale In Tembisa Central
Rasamanikya is a excellent preparation in the field of Rasashastra, it is used in various Kushtha Roga, Shwasa, Vicharchika, Bhagandara, Vatarakta, and Phiranga Roga. In this article Preparation& Comparative analytical profile for both Formulationon i.e Rasamanikya prepared by Kushmanda swarasa & Churnodhaka Shodita Haratala. The study aims to provide insights into the comparative efficacy and analytical aspects of these formulations for enhanced therapeutic outcomes.
One health condition that is becoming more common day by day is diabetes.
According to research conducted by the National Family Health Survey of India, diabetic cases show a projection which might increase to 10.4% by 2030.
Local Advanced Lung Cancer: Artificial Intelligence, Synergetics, Complex Sys...Oleg Kshivets
Overall life span (LS) was 1671.7±1721.6 days and cumulative 5YS reached 62.4%, 10 years – 50.4%, 20 years – 44.6%. 94 LCP lived more than 5 years without cancer (LS=2958.6±1723.6 days), 22 – more than 10 years (LS=5571±1841.8 days). 67 LCP died because of LC (LS=471.9±344 days). AT significantly improved 5YS (68% vs. 53.7%) (P=0.028 by log-rank test). Cox modeling displayed that 5YS of LCP significantly depended on: N0-N12, T3-4, blood cell circuit, cell ratio factors (ratio between cancer cells-CC and blood cells subpopulations), LC cell dynamics, recalcification time, heparin tolerance, prothrombin index, protein, AT, procedure type (P=0.000-0.031). Neural networks, genetic algorithm selection and bootstrap simulation revealed relationships between 5YS and N0-12 (rank=1), thrombocytes/CC (rank=2), segmented neutrophils/CC (3), eosinophils/CC (4), erythrocytes/CC (5), healthy cells/CC (6), lymphocytes/CC (7), stick neutrophils/CC (8), leucocytes/CC (9), monocytes/CC (10). Correct prediction of 5YS was 100% by neural networks computing (error=0.000; area under ROC curve=1.0).
Histololgy of Female Reproductive System.pptxAyeshaZaid1
Dive into an in-depth exploration of the histological structure of female reproductive system with this comprehensive lecture. Presented by Dr. Ayesha Irfan, Assistant Professor of Anatomy, this presentation covers the Gross anatomy and functional histology of the female reproductive organs. Ideal for students, educators, and anyone interested in medical science, this lecture provides clear explanations, detailed diagrams, and valuable insights into female reproductive system. Enhance your knowledge and understanding of this essential aspect of human biology.
Integrating Ayurveda into Parkinson’s Management: A Holistic ApproachAyurveda ForAll
Explore the benefits of combining Ayurveda with conventional Parkinson's treatments. Learn how a holistic approach can manage symptoms, enhance well-being, and balance body energies. Discover the steps to safely integrate Ayurvedic practices into your Parkinson’s care plan, including expert guidance on diet, herbal remedies, and lifestyle modifications.
Osteoporosis - Definition , Evaluation and Management .pdfJim Jacob Roy
Osteoporosis is an increasing cause of morbidity among the elderly.
In this document , a brief outline of osteoporosis is given , including the risk factors of osteoporosis fractures , the indications for testing bone mineral density and the management of osteoporosis
TEST BANK For Community and Public Health Nursing: Evidence for Practice, 3rd...Donc Test
TEST BANK For Community and Public Health Nursing: Evidence for Practice, 3rd Edition by DeMarco, Walsh, Verified Chapters 1 - 25, Complete Newest Version TEST BANK For Community and Public Health Nursing: Evidence for Practice, 3rd Edition by DeMarco, Walsh, Verified Chapters 1 - 25, Complete Newest Version TEST BANK For Community and Public Health Nursing: Evidence for Practice, 3rd Edition by DeMarco, Walsh, Verified Chapters 1 - 25, Complete Newest Version Test Bank For Community and Public Health Nursing: Evidence for Practice 3rd Edition Pdf Chapters Download Test Bank For Community and Public Health Nursing: Evidence for Practice 3rd Edition Pdf Download Stuvia Test Bank For Community and Public Health Nursing: Evidence for Practice 3rd Edition Study Guide Test Bank For Community and Public Health Nursing: Evidence for Practice 3rd Edition Ebook Download Stuvia Test Bank For Community and Public Health Nursing: Evidence for Practice 3rd Edition Questions and Answers Quizlet Test Bank For Community and Public Health Nursing: Evidence for Practice 3rd Edition Studocu Test Bank For Community and Public Health Nursing: Evidence for Practice 3rd Edition Quizlet Test Bank For Community and Public Health Nursing: Evidence for Practice 3rd Edition Stuvia Community and Public Health Nursing: Evidence for Practice 3rd Edition Pdf Chapters Download Community and Public Health Nursing: Evidence for Practice 3rd Edition Pdf Download Course Hero Community and Public Health Nursing: Evidence for Practice 3rd Edition Answers Quizlet Community and Public Health Nursing: Evidence for Practice 3rd Edition Ebook Download Course hero Community and Public Health Nursing: Evidence for Practice 3rd Edition Questions and Answers Community and Public Health Nursing: Evidence for Practice 3rd Edition Studocu Community and Public Health Nursing: Evidence for Practice 3rd Edition Quizlet Community and Public Health Nursing: Evidence for Practice 3rd Edition Stuvia Community and Public Health Nursing: Evidence for Practice 3rd Edition Test Bank Pdf Chapters Download Community and Public Health Nursing: Evidence for Practice 3rd Edition Test Bank Pdf Download Stuvia Community and Public Health Nursing: Evidence for Practice 3rd Edition Test Bank Study Guide Questions and Answers Community and Public Health Nursing: Evidence for Practice 3rd Edition Test Bank Ebook Download Stuvia Community and Public Health Nursing: Evidence for Practice 3rd Edition Test Bank Questions Quizlet Community and Public Health Nursing: Evidence for Practice 3rd Edition Test Bank Studocu Community and Public Health Nursing: Evidence for Practice 3rd Edition Test Bank Quizlet Community and Public Health Nursing: Evidence for Practice 3rd Edition Test Bank Stuvia
25. <0.01 to 0.24 mg/m3
Respirable crystalline silica
Results from personal sampling
WEL = 0.1mg/m3
26.
27. Crossrail control solutions
Material substitution
and process
modifications
Engineering controls
Exclusion zones
Respiratory protection
Regular dust monitoring
28.
29.
30. Join us and be part of the solution
www.breathefreely.org.uk