Cisco 2960x datasheet and supported sfp modulesMark Tsui
Cisco Catalyst 2960-X series switches are fixed-configuration and stackable gigabit ethernet layer 2 and layer 3 access switches, and include configurations to fit in any enterprise network. Here I will mainly introduce the knowledge of 2960-X series switches and compatible SFP modules for it.
The Cisco GLC-LH-SMD 1000BASE-LX/LH SFP can operate on both multimode and single-mode fibers. It uses 1300-nm wavelength and supports distances up to 10 km on single-mode fiber and 550 m on multimode fiber. The SFP has dual LC connectors, extended temperature support, and digital optical monitoring.
Versitron Fiber SFP Modules are high quality SFP modules coming with different types and features. Get to know about SFP modules, SFP module types and it's features
Using Cisco Devices to Build Up Different Networks美兰 曾
The document discusses 5 solutions for building networks of varying sizes using Cisco devices:
1. A small business network with 2-20 PCs can use a Cisco router and 24-port switch for an easy and cheap configuration.
2. For harsh environments, adding an ASA firewall, Cisco router, and 48-port switch provides stronger security and stability.
3. A network with around 100 clients across multiple offices benefits from a distribution switch to improve forwarding between offices, along with fiber modules for increased speed.
4. Larger networks supporting IP phones and video need powerful firewalls, voice-enabled routers, T1 modules, and PoE switches to power phones.
5. The largest
Cisco at v mworld 2015 vmworld 2015 mds final presoldangelo0772
This document discusses Cisco's 16G MDS and 10/40G FCoE switches for building next generation data center storage area networks (SANs). It introduces Cisco's new 16G MDS family for deploying small, medium, and large SANs including the MDS 9148S, MDS 9396S, and MDS 9700. It also discusses using 10/40G Ethernet to converge IP and Fibre Channel storage traffic and provides an example of a large-scale converged Ethernet deployment with the Nexus 7700 and 7000 series.
APPLICATIONS
IEEE 802.3: 10Base-T, 100Base-T, 1000Base-T, 10GBase-T, IEEE 802.5 16 MB, ISDN, TPDDI, ATM Power over Ethernet (PoE) / PoE+. These cables are used in data communication networks with 500 MHz bandwith capacity.
Cisco 2960x datasheet and supported sfp modulesMark Tsui
Cisco Catalyst 2960-X series switches are fixed-configuration and stackable gigabit ethernet layer 2 and layer 3 access switches, and include configurations to fit in any enterprise network. Here I will mainly introduce the knowledge of 2960-X series switches and compatible SFP modules for it.
The Cisco GLC-LH-SMD 1000BASE-LX/LH SFP can operate on both multimode and single-mode fibers. It uses 1300-nm wavelength and supports distances up to 10 km on single-mode fiber and 550 m on multimode fiber. The SFP has dual LC connectors, extended temperature support, and digital optical monitoring.
Versitron Fiber SFP Modules are high quality SFP modules coming with different types and features. Get to know about SFP modules, SFP module types and it's features
Using Cisco Devices to Build Up Different Networks美兰 曾
The document discusses 5 solutions for building networks of varying sizes using Cisco devices:
1. A small business network with 2-20 PCs can use a Cisco router and 24-port switch for an easy and cheap configuration.
2. For harsh environments, adding an ASA firewall, Cisco router, and 48-port switch provides stronger security and stability.
3. A network with around 100 clients across multiple offices benefits from a distribution switch to improve forwarding between offices, along with fiber modules for increased speed.
4. Larger networks supporting IP phones and video need powerful firewalls, voice-enabled routers, T1 modules, and PoE switches to power phones.
5. The largest
Cisco at v mworld 2015 vmworld 2015 mds final presoldangelo0772
This document discusses Cisco's 16G MDS and 10/40G FCoE switches for building next generation data center storage area networks (SANs). It introduces Cisco's new 16G MDS family for deploying small, medium, and large SANs including the MDS 9148S, MDS 9396S, and MDS 9700. It also discusses using 10/40G Ethernet to converge IP and Fibre Channel storage traffic and provides an example of a large-scale converged Ethernet deployment with the Nexus 7700 and 7000 series.
APPLICATIONS
IEEE 802.3: 10Base-T, 100Base-T, 1000Base-T, 10GBase-T, IEEE 802.5 16 MB, ISDN, TPDDI, ATM Power over Ethernet (PoE) / PoE+. These cables are used in data communication networks with 500 MHz bandwith capacity.
The Cisco Aironet 1140 is Cisco's newest 802.11n access point, which has a sleeker design and built-in antennas compared to the previous 1250 model. It has the same base price but is less than half the weight. The 1140 can run two radios with full 802.11n performance and handle encryption using a standard 802.3af PoE connection. It is part of Cisco's plan to make 802.11n the default choice for enterprise wireless LANs.
Cisco switches for small business are designed to boost productivity and efficiency. Cisco offers a broad portfolio of unmanaged and managed switches to suit different needs and budgets. The Cisco Catalyst 2960 and 2960S series switches provide scalable network management, security features, and quality of service capabilities for growing businesses. These switches are available with different port configurations, management options, and prices.
Pcdvpcu en ex9200-customer-presentation-1He Hariyadi
Juniper EX9200 is programmable Core Switch for Enterprise and Telco, supporting SDN based, 100Gig Ethernet and Full Routing capability for MPLS private networks
TechWiseTV Workshop - Q&A - Cisco Catalyst 9600: Deep Dive and Design Conside...Robb Boyd
Cisco Catalyst 9600 Series Switches are the next-generation purpose-built 40/100G modular core/aggregation platform, providing resiliency at scale with the industry’s most comprehensive security while allowing the business to grow at a low total operational cost.
The Cisco Catalyst 9606R is a 6-slot 8RU chassis ready to support a wired switching capacity of up to 25.6 Tbps, with up to 6.4 Tbps of bandwidth per slot. Some salient features of the Cisco Catalyst 9606R chassis are:
- Supports a nonblocking 40/100G Quad Small Form-Factor Pluggable (QSFP+, QSFP28) line card
- Supports a line-rate 1/10/25G SFP and Enhanced SFP (SFP, SFP+, SFP28) line card
- Optimized for the enterprise with efficient side-to-side airflow
- Front accessibility for all removable components, such as the supervisor, line cards, power supply, and fan tray
- Dual accessible fan tray for easy removal
- Embedded RFID tag for easy asset tracking
CCNA is Cisco's entry-level certification for network associates. It covers basic networking including WAN and LAN concepts, IP addressing, routing protocols like RIP and OSPF, Ethernet, VLANs, and access control lists. The exam focuses on network basics like the OSI model, TCP/IP, cabling, Cisco routers and switches, routing tables, and network design fundamentals. Passing the CCNA exam is the first step for careers working with Cisco networks.
The document discusses switching in enterprise networks. It compares different types of switches used, including hardware-based layer 2 switches and software-based multilayer switches. It explains how spanning tree protocol prevents switching loops by blocking redundant links. It also describes how to configure and maintain VLANs on Cisco switches, including assigning ports, configuring trunking between switches, and using the VLAN Trunking Protocol to manage VLANs across the network. Inter-VLAN routing is enabled using a layer 3 device with subinterfaces.
The RUGGEDCOM RSG907R is a compact Gigabit IEEE 1588 compatible Ethernet switch supporting High Availability Seamless Redundancy (HSR) and Parallel Redundancy Protocol according to IEC 62439-3
The document summarizes the candidate's work experience as an engineer-in-charge for network systems including Cisco, HP, Avaya, Alcatel-Lucent, Aruba, Juniper, and Huawei equipment. It lists specific server, switch, router, security appliance, and IP camera models from Dell, HP, IBM, Cisco, Huawei, Avaya, Alcatel-Lucent, Aruba, Juniper, Pelco, Sony, and other manufacturers. It also mentions experience with structured cabling systems from Leviton, Systemax, and Commscope.
The Cisco Catalyst 2960 series switches are cost-effective, fixed-configuration switches that provide Fast Ethernet connectivity for small office and branch networks. They simplify migration from unmanaged to managed networks. The 2960 series uses features like Auto Smart Ports for easy configuration and Auto Install for simple deployment. Comprehensive management tools allow for ongoing monitoring. The 2960 series also supports Power over Ethernet, quality of service, and security capabilities for secure operations. Models offer 24 or 48 ports with 802.3af PoE, dual-purpose uplinks, auto configuration, troubleshooting tools, and quality of service. They provide a cost-effective solution for small networks.
The document discusses spanning tree protocols (STP) and their implementations in Cisco switches. It covers STP concepts like root bridge election, port states, BPDUs, port roles and costs. It also explains variants of STP supported by Cisco like PVST+, RSTP and Rapid-PVST+ as well as their configuration. Troubleshooting steps for STP issues are also provided.
With users expecting an immersive experience, and with IoT becoming the new mobile, we are more dependent on Wi-Fi than ever before. The Cisco Catalyst 9100 Access Points, powered by Wi-Fi 6 (802.11ax) technology and supporting Cisco’s intent-based networking architecture, are ready for the growing user expectations, IoT devices, and next-generation cloud-driven applications. Cisco’s first Wi-Fi 6 access point can handle the increased mobile traffic as well as support IoT at scale. It has superior RF innovations and will expand wireless access with intelligence to provide a secure, reliable, high-quality wireless experience for all networks.
The Cisco Catalyst 3750-X Series Switches are designed to provide high availability, security, investment protection, high quality of service, energy efficiency, and simplified operation. Key features include outstanding security capabilities like Flexible NetFlow and MACsec encryption, comprehensive networking services such as Medianet and SmartOperations, and category-best availability and quality of service ensured by features like hot-swappable components and strict priority queuing. The switches also offer improved energy efficiency through Cisco EnergyWise and StackPower technologies and strong investment protection with support for transitions to IPv6 and software upgrades.
WIMAX is a wireless technology standard that provides broadband access over long distances. It uses the IEEE 802.16 standard and operates in both licensed and unlicensed spectrum. WIMAX can provide high-speed connectivity for applications such as last mile internet access, cellular backhaul, and mobile broadband services. It has advantages over WiFi in terms of range and throughput, but faces competition from existing cellular technologies.
The Cisco Catalyst 2960-X Series are fixed-configuration, stackable Gigabit Ethernet switches that provide enterprise-class access and networking capabilities for campus and branch applications. They support various software-defined capabilities and feature sets including LAN Lite, LAN Base, and IP Lite. The switches are available in several models that vary in port configuration, uplink interfaces, power supply, and other hardware specs depending on the intended use and deployment.
Suppose each main building on UIS campus, such as UHB, PAC etc., is connected to the campus backbone network via a router and the routers need to be upgraded. Do some research on the Internet about routers for corporate networks. Present a short list of good candidates and recommend one model to UIS. Must justify your recommendation.
Cisco catalyst 2960 plus series switch datasheetAmy Huang
Cisco Catalyst 2960-Plus Series Switch Datasheet - Learn product details such as features and benefits, as well as hardware and software specifications.
This document provides an overview of ALE's product portfolio, which includes network management, infrastructure, security, and service products such as the OmniVista 2500 for LAN and WLAN management, the OmniAccess WLAN 4010 for wireless access points, and the OmniSwitch 6855 and 6250 for WAN/MPLS networking. It lists their enterprise service router, data center switching platforms including the OmniSwitch 9900 and 10K, and security products like ClearPass for network access control.
The document describes Cisco ASR 9000 Series Ethernet Line Cards, which are carrier-grade networking components. The line cards deliver scalable, high-availability Ethernet and IP services to enable profitable business, residential, and mobile services. They provide dense QoS and support both Layer 2 and 3 services, allowing operators to reduce costs and quickly deploy new services. Key features include high port densities, support for various interface types and distances, extensive Layer 2 and 3 capabilities, carrier-class OAM functions, and timing synchronization.
The SFP-H10GB-ACU10M is an active optical cable with SFP+ connectors that is 10 meters in length, suitable for short distance interconnects within and across racks to provide 10Gb connectivity. It supports data rates up to 10.5Gbps and is compatible with a wide range of Cisco switches and routers. Key features include lower cost than optical transceivers, hot-pluggable SFP form factor, and operating temperature range of 0 to 70°C.
The Cisco 1000BASE-T GBIC provides Gigabit Ethernet connectivity over existing copper network infrastructures between wiring closets and high-end workstations. It leverages 1000BASE-X design for a simple migration to Gigabit Ethernet. The WS-G5483 GBIC operates at 1000Mb/s over Cat 5 cable up to 100m with no optical components. It has an operating temperature of 0-70°C and storage temperature of -40-85°C.
The Huawei S5700-28X-LI-24S-AC is a network switch that offers 24 Gigabit Ethernet SFP ports, 4 combo 10/100/1000 Base-T ports, and 4 10 Gigabit SFP+ ports. It has a switching capacity of 256 Gbit/s and supports up to 16K MAC addresses. The switch is supplied with AC power and has dimensions of 44.2 cm x 22 cm x 4.36 cm. It provides highly scalable connectivity for enterprise campus networks and data center aggregation.
The document describes the SFP-H10GB-CU5M, a direct attach copper cable with SFP+ connectors on each end that allows 10 Gbps Ethernet connectivity over short distances of up to 5 meters. It supports a wide range of Cisco switches and routers. The cable uses 30 AWG copper wire and twinaxial cabling for low latency and energy efficient 10 Gbps connections.
The Cisco Aironet 1140 is Cisco's newest 802.11n access point, which has a sleeker design and built-in antennas compared to the previous 1250 model. It has the same base price but is less than half the weight. The 1140 can run two radios with full 802.11n performance and handle encryption using a standard 802.3af PoE connection. It is part of Cisco's plan to make 802.11n the default choice for enterprise wireless LANs.
Cisco switches for small business are designed to boost productivity and efficiency. Cisco offers a broad portfolio of unmanaged and managed switches to suit different needs and budgets. The Cisco Catalyst 2960 and 2960S series switches provide scalable network management, security features, and quality of service capabilities for growing businesses. These switches are available with different port configurations, management options, and prices.
Pcdvpcu en ex9200-customer-presentation-1He Hariyadi
Juniper EX9200 is programmable Core Switch for Enterprise and Telco, supporting SDN based, 100Gig Ethernet and Full Routing capability for MPLS private networks
TechWiseTV Workshop - Q&A - Cisco Catalyst 9600: Deep Dive and Design Conside...Robb Boyd
Cisco Catalyst 9600 Series Switches are the next-generation purpose-built 40/100G modular core/aggregation platform, providing resiliency at scale with the industry’s most comprehensive security while allowing the business to grow at a low total operational cost.
The Cisco Catalyst 9606R is a 6-slot 8RU chassis ready to support a wired switching capacity of up to 25.6 Tbps, with up to 6.4 Tbps of bandwidth per slot. Some salient features of the Cisco Catalyst 9606R chassis are:
- Supports a nonblocking 40/100G Quad Small Form-Factor Pluggable (QSFP+, QSFP28) line card
- Supports a line-rate 1/10/25G SFP and Enhanced SFP (SFP, SFP+, SFP28) line card
- Optimized for the enterprise with efficient side-to-side airflow
- Front accessibility for all removable components, such as the supervisor, line cards, power supply, and fan tray
- Dual accessible fan tray for easy removal
- Embedded RFID tag for easy asset tracking
CCNA is Cisco's entry-level certification for network associates. It covers basic networking including WAN and LAN concepts, IP addressing, routing protocols like RIP and OSPF, Ethernet, VLANs, and access control lists. The exam focuses on network basics like the OSI model, TCP/IP, cabling, Cisco routers and switches, routing tables, and network design fundamentals. Passing the CCNA exam is the first step for careers working with Cisco networks.
The document discusses switching in enterprise networks. It compares different types of switches used, including hardware-based layer 2 switches and software-based multilayer switches. It explains how spanning tree protocol prevents switching loops by blocking redundant links. It also describes how to configure and maintain VLANs on Cisco switches, including assigning ports, configuring trunking between switches, and using the VLAN Trunking Protocol to manage VLANs across the network. Inter-VLAN routing is enabled using a layer 3 device with subinterfaces.
The RUGGEDCOM RSG907R is a compact Gigabit IEEE 1588 compatible Ethernet switch supporting High Availability Seamless Redundancy (HSR) and Parallel Redundancy Protocol according to IEC 62439-3
The document summarizes the candidate's work experience as an engineer-in-charge for network systems including Cisco, HP, Avaya, Alcatel-Lucent, Aruba, Juniper, and Huawei equipment. It lists specific server, switch, router, security appliance, and IP camera models from Dell, HP, IBM, Cisco, Huawei, Avaya, Alcatel-Lucent, Aruba, Juniper, Pelco, Sony, and other manufacturers. It also mentions experience with structured cabling systems from Leviton, Systemax, and Commscope.
The Cisco Catalyst 2960 series switches are cost-effective, fixed-configuration switches that provide Fast Ethernet connectivity for small office and branch networks. They simplify migration from unmanaged to managed networks. The 2960 series uses features like Auto Smart Ports for easy configuration and Auto Install for simple deployment. Comprehensive management tools allow for ongoing monitoring. The 2960 series also supports Power over Ethernet, quality of service, and security capabilities for secure operations. Models offer 24 or 48 ports with 802.3af PoE, dual-purpose uplinks, auto configuration, troubleshooting tools, and quality of service. They provide a cost-effective solution for small networks.
The document discusses spanning tree protocols (STP) and their implementations in Cisco switches. It covers STP concepts like root bridge election, port states, BPDUs, port roles and costs. It also explains variants of STP supported by Cisco like PVST+, RSTP and Rapid-PVST+ as well as their configuration. Troubleshooting steps for STP issues are also provided.
With users expecting an immersive experience, and with IoT becoming the new mobile, we are more dependent on Wi-Fi than ever before. The Cisco Catalyst 9100 Access Points, powered by Wi-Fi 6 (802.11ax) technology and supporting Cisco’s intent-based networking architecture, are ready for the growing user expectations, IoT devices, and next-generation cloud-driven applications. Cisco’s first Wi-Fi 6 access point can handle the increased mobile traffic as well as support IoT at scale. It has superior RF innovations and will expand wireless access with intelligence to provide a secure, reliable, high-quality wireless experience for all networks.
The Cisco Catalyst 3750-X Series Switches are designed to provide high availability, security, investment protection, high quality of service, energy efficiency, and simplified operation. Key features include outstanding security capabilities like Flexible NetFlow and MACsec encryption, comprehensive networking services such as Medianet and SmartOperations, and category-best availability and quality of service ensured by features like hot-swappable components and strict priority queuing. The switches also offer improved energy efficiency through Cisco EnergyWise and StackPower technologies and strong investment protection with support for transitions to IPv6 and software upgrades.
WIMAX is a wireless technology standard that provides broadband access over long distances. It uses the IEEE 802.16 standard and operates in both licensed and unlicensed spectrum. WIMAX can provide high-speed connectivity for applications such as last mile internet access, cellular backhaul, and mobile broadband services. It has advantages over WiFi in terms of range and throughput, but faces competition from existing cellular technologies.
The Cisco Catalyst 2960-X Series are fixed-configuration, stackable Gigabit Ethernet switches that provide enterprise-class access and networking capabilities for campus and branch applications. They support various software-defined capabilities and feature sets including LAN Lite, LAN Base, and IP Lite. The switches are available in several models that vary in port configuration, uplink interfaces, power supply, and other hardware specs depending on the intended use and deployment.
Suppose each main building on UIS campus, such as UHB, PAC etc., is connected to the campus backbone network via a router and the routers need to be upgraded. Do some research on the Internet about routers for corporate networks. Present a short list of good candidates and recommend one model to UIS. Must justify your recommendation.
Cisco catalyst 2960 plus series switch datasheetAmy Huang
Cisco Catalyst 2960-Plus Series Switch Datasheet - Learn product details such as features and benefits, as well as hardware and software specifications.
This document provides an overview of ALE's product portfolio, which includes network management, infrastructure, security, and service products such as the OmniVista 2500 for LAN and WLAN management, the OmniAccess WLAN 4010 for wireless access points, and the OmniSwitch 6855 and 6250 for WAN/MPLS networking. It lists their enterprise service router, data center switching platforms including the OmniSwitch 9900 and 10K, and security products like ClearPass for network access control.
The document describes Cisco ASR 9000 Series Ethernet Line Cards, which are carrier-grade networking components. The line cards deliver scalable, high-availability Ethernet and IP services to enable profitable business, residential, and mobile services. They provide dense QoS and support both Layer 2 and 3 services, allowing operators to reduce costs and quickly deploy new services. Key features include high port densities, support for various interface types and distances, extensive Layer 2 and 3 capabilities, carrier-class OAM functions, and timing synchronization.
The SFP-H10GB-ACU10M is an active optical cable with SFP+ connectors that is 10 meters in length, suitable for short distance interconnects within and across racks to provide 10Gb connectivity. It supports data rates up to 10.5Gbps and is compatible with a wide range of Cisco switches and routers. Key features include lower cost than optical transceivers, hot-pluggable SFP form factor, and operating temperature range of 0 to 70°C.
The Cisco 1000BASE-T GBIC provides Gigabit Ethernet connectivity over existing copper network infrastructures between wiring closets and high-end workstations. It leverages 1000BASE-X design for a simple migration to Gigabit Ethernet. The WS-G5483 GBIC operates at 1000Mb/s over Cat 5 cable up to 100m with no optical components. It has an operating temperature of 0-70°C and storage temperature of -40-85°C.
The Huawei S5700-28X-LI-24S-AC is a network switch that offers 24 Gigabit Ethernet SFP ports, 4 combo 10/100/1000 Base-T ports, and 4 10 Gigabit SFP+ ports. It has a switching capacity of 256 Gbit/s and supports up to 16K MAC addresses. The switch is supplied with AC power and has dimensions of 44.2 cm x 22 cm x 4.36 cm. It provides highly scalable connectivity for enterprise campus networks and data center aggregation.
The document describes the SFP-H10GB-CU5M, a direct attach copper cable with SFP+ connectors on each end that allows 10 Gbps Ethernet connectivity over short distances of up to 5 meters. It supports a wide range of Cisco switches and routers. The cable uses 30 AWG copper wire and twinaxial cabling for low latency and energy efficient 10 Gbps connections.
The document provides specifications for the Huawei S5700S-52P-LI-AC gigabit enterprise switch. It has 48 Ethernet ports, 4 SFP ports, a switching capacity of 256 Gbit/s, and power consumption of less than 48.4W. It is an energy-efficient switch for building reliable and secure enterprise networks. The document also lists optical module and power supply options and compares it to the similar S5700-52P-PWR-LI-AC model which additionally supports PoE.
The document is a datasheet for the Cisco SFP-H10GB-CU2M, a 10GBASE-T twinaxial direct attach cable (DAC) with SFP+ connectors on both ends and a length of 2 meters. It is compatible with a wide range of Cisco switches and routers, including the Catalyst, Nexus, and UCS product lines. The cable has 30 AWG twinaxial cabling and connects SFP+ ports at 10 Gbps speeds over passive direct attach cabling.
The document is a datasheet for the Cisco SFP-H10GB-CU1M, a 1 meter passive direct attach copper cable with SFP+ connectors on each end, allowing 10 Gigabit Ethernet connections. It supports a wide range of Cisco switches and routers. The cable uses 30 AWG twinaxial cabling and provides low latency and EMI protection for 10G applications.
The document provides specifications for the Cisco SFP-10G-SR optical transceiver module. It operates at 850nm wavelength for use in multimode fiber with link lengths up to 400m depending on the fiber type. Key specs include a transmit power range of -1.2dBm to -7.3dBm and receive range of -1.0dBm to -9.9dBm. It is compatible with many Cisco and other brand networking platforms and provides a comparison of specifications to the SFP-10G-LR module. Contact information is provided to purchase or get additional information.
The document is a datasheet for the N2K-C2348UPQ Cisco Nexus 2300 Platform Chassis. It provides an overview of the chassis, including its specifications, features, interfaces, connectivity options, dimensions, and supported transceivers and cables. The chassis offers 48 1/10GbE ports, 6 40GbE ports, hardware forwarding at 1440Gbps, and support for Cisco's Nexus 5000/6000/7000/9000 series switches when used as a fabric extender.
The SFP-10G-ER is a Cisco 10GBASE-ER module that supports link lengths up to 40 kilometers over standard single-mode fiber. It operates at a wavelength of 1550nm and is compatible with Cisco routers, switches, and other platforms. Key specifications include a transmit power between -4.7 and 4.0dBm, receive power between -15.8 and -1dBm, and a temperature operating range of COM. It allows for longer transmission distances compared to shorter-range SFP modules.
The document is a datasheet for Cisco SFP-10G-LR optical transceiver modules. It provides specifications for the modules such as an operating wavelength of 1310nm, support for standard single-mode fiber up to a distance of 10km, maximum transmit power of 0.5dBm and minimum receive power of -14.4dBm. It also lists compatible Cisco and other network equipment that the SFP-10G-LR modules can be used with and provides purchase and support contact information for the supplier.
The document discusses network devices and operating systems, specifically focusing on Cisco's NX-OS operating system designed for Nexus switches and MDS Fibre Channel switches. It also discusses the differences between switches and routers, as well as Cisco's Catalyst brand of switches, their operating systems (CatOS and IOS), interfaces, and models. The document concludes with a brief overview of D-Link Corporation and their position as a leading networking company.
The CPAK-100G-SR10= is a 100Gbps Cisco CPAK module for multimode fiber (MMF) with a wavelength of 850nm. It has dimensions of 11.6 x 34.8 x 101.2 mm and supports transmission distances of up to 100m for OM3 fiber and 150m for OM4 fiber. The module provides a compact solution for high-density 100Gbps connectivity in data center and service provider networks.
The SFP-H10GB-CU3M is a direct attach copper cable that connects two SFP+ ports with a passive 3 meter long cable for high-speed 10 Gigabit Ethernet applications. It offers reliable and low latency performance between supported Cisco switches and routers.
The LS-S2309TP-SI-AC is a basic layer 2 access switch with 8 FastEthernet ports, 1 Gigabit Ethernet port, and an AC power supply. It provides functions such as VLAN, QoS, IPv6, port mirroring, and basic security. Compared to the similar LS-S2309TP-EI-AC model, it has fewer advanced features and only supports AC power. The LS-S2309TP-SI-AC is suitable for small networks that require basic switching and connectivity.
Cisco asr 1000 series embedded services processors data sheet.Amanda Meng
The document describes Cisco ASR 1000 Series Embedded Service Processors (ESPs) which provide centralized forwarding-engine options for Cisco ASR 1000 Series Aggregation Services Routers. The ESPs support bandwidths from 2.5 Gbps to 40 Gbps and provide data plane processing for routing, security, quality of service and other features. They are used in applications such as broadband aggregation, service provider edge routing, enterprise WAN aggregation and internet gateways.
The Avaya Ethernet Routing Switch 4500 Series is a stackable chassis system providing high-performance, convergence-ready and resilient Ethernet switching. It offers 11 models with Fast Ethernet, Gigabit Ethernet, Power-over-Ethernet, and 10GbE uplink options. The series provides resilient stacking, advanced routing, security, QoS, and management capabilities, making it well-suited for enterprise wiring closets and edge deployments.
The document provides specifications for the Cisco Catalyst WS-C3850-48F-L switch. It is a 1RU switch with 48 10/100/1000 Ethernet ports that support PoE+. It has a LAN Base IOS image and supports up to 255 VLANs. It provides 800W of PoE+ power. Additional features include stacking of up to 9 switches, 4GB of RAM, 2GB flash memory, and various network module and accessory options.
Driving Business Innovation: Latest Generative AI Advancements & Success StorySafe Software
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Infrastructure Challenges in Scaling RAG with Custom AI modelsZilliz
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
Building Production Ready Search Pipelines with Spark and MilvusZilliz
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Taking AI to the Next Level in Manufacturing.pdfssuserfac0301
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
UiPath Test Automation using UiPath Test Suite series, part 6DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Your One-Stop Shop for Python Success: Top 10 US Python Development Providersakankshawande
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Fueling AI with Great Data with Airbyte WebinarZilliz
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
GraphRAG for Life Science to increase LLM accuracyTomaz Bratanic
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
HCL Notes and Domino License Cost Reduction in the World of DLAU
SFP-10G-SR Datasheet
1. SFP-10G-SR Overview
The Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver, and it supports up to 400m link length
when uses 4700Mhz KM MMF (OM3).
The Features
Figure 1. The appearance of SFP-10G-SR.
☆ Industry’s smallest 10G form factor for greatest density per chassis
☆ Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch
☆ Supports “pay-as-you-populate” model for investment protection and ease of technology migration
☆ Digital optical monitoring capability for strong diagnostic capabilities
☆ Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link
☆ Cisco quality identification (ID) feature enables a Cisco platform to identify whether the module is certified and
tested by Cisco
The Supported Platforms
Figure 2. The SFP-10G-SR can be supported in a switch SFP slot.
2. Table 1. Cisco SFP+ modules are supported on a wide range of Cisco switches and routers:
Supported Platforms Supported Platforms
Cisco ASR 1000 Series Router ASR 901
Cisco Catalyst 2960-S Series Switches ASR 9000v Series Router
Cisco Catalyst 2960-X Series Switches CRS Router
Cisco Catalyst 2960-XR Series Switches MDS 9000
Cisco Catalyst 3560 Series Switches ME 4500
Cisco Catalyst 3560-E Series Switches ME 4900NCS 6000 Series Router
Cisco Catalyst 3560-X Series Switches SCE 8000
Cisco Catalyst 3850 Series Switches Shared Port Adapter (SPA)
Cisco ASR 903 router Catalyst 2350 and 2360 Series Switches
Cisco ASR 9000 Series Router Catalyst 3100 Blade Switches
Cisco 7600 Series Router Nexus 2000 and 4000 Series Switches
Cisco Catalyst 4500 and 4500-X Series Switches Nexus 9000 and 9500 (modular) Series Switches
Cisco Catalyst 3750,3750-E,3750-X Series Switches RF Gateway Series
Cisco Nexus 3000 Series Switches Unified Computing System (UCS) Switches
Compare to Similar Items
Table 2. SFP-10G-SR and SFP-10G-LR Port Cabling Specifications:
Cisco SFP+ Wavelength
(nm)
Cable
Type
Core Size
(Microns)
Modal Bandwidth
(MHz/km)
Cable
Distance
SFP-10G-
SR
850 MMF 62.5 160 (FDDI) 26m