The document discusses Huawei's NetEngine AR8000 series enterprise routers. It provides an overview of the AR8140 router, including its specifications and typical deployment scenarios in SD-WAN solutions. It also describes the naming conventions for NetEngine AR series products and differences in configuration between the AR8000 and other AR models. Finally, it lists some common tools for obtaining product specifications and hardware information.
This document provides an overview of wireless networking configuration and tools for OpenWrt. It discusses wireless configuration using UCI, hardware modes, encryption types, and tools like iwconfig, iwpriv, and iwlist. It also covers Linux wireless concepts like mac80211 and cfg80211, as well as Qualcomm Atheros driver models and testing scripts for changing wireless settings.
The purpose of this guide is to explain the enhancements in 802.11ac standard and provide guidance towards
migrating to 802.11ac with respect to network design, deployment, and configuration best practices for campus environments like offices, university campus, and dorm environments.
This guide covers the following topics in detail:
- Summary of Recommendations
- 802.11ac Features and Benefits
- 802.11ac Planning and Deployment Guidelines
- Best Practice Recommendations for Deploying 802.11ac WLANs
This guide is intended for those who are willing to learn about the 802.11ac standards and understand the best practices in deploying a high-performing 802.11ac
This document provides instructions for configuring IPv6 static routes on Huawei routers. It describes assigning IPv6 addresses to router interfaces, configuring static routes between routers, and setting default gateways for hosts. Static routes must be configured to ensure communication between any two hosts. The procedure configures Router A, Router B, and Router C with static routes so that hosts in different VLANs can use the appropriate router as their gateway.
The document provides instructions for configuring Ethernet interfaces and link aggregation on Huawei switches. It includes:
1) Manually setting the line rate and duplex mode of Ethernet interfaces on switches S1 and S2 to 100Mbps full duplex.
2) Creating an Ethernet trunk (Eth-Trunk 1) on S1 and S2 and adding interfaces G0/0/9 and G0/0/10 to configure manual link aggregation between the switches.
3) Deleting the manual link aggregation configurations in preparation for configuring static LACP mode aggregation on the same interfaces.
The document introduces Aruba's new 7200 Controller Series, which provides improved performance, scale, and cost savings compared to prior solutions. Key points include:
- The 7200 series supports up to 2048 access points, 32,000 clients, and 40Gbps of throughput to handle more bandwidth-intensive applications and 802.11ac networks.
- Aruba's AppRF technology analyzes traffic and prioritizes applications like voice and video for improved quality of experience.
- Models range from the 7210 for small/medium deployments up to the 7240 for large enterprises, with pricing nearly half of comparable Cisco solutions.
- Aruba is offering migration incentives include license transfers from existing
Ruijie Networks is a Chinese networking company that produces WiFi access points and controllers. Over the past decade, Ruijie has grown to become a top networking vendor in China with over 300 R&D employees and annual sales exceeding $200 million by 2009. Some key milestones include releasing their first 11ac product in 2011, achieving the number 2 market share in China by 2015, and becoming the top vendor for WiFi 6 products in China with over 40% market share by 2019. Ruijie continues to invest in new WiFi technologies like 802.11ax and develop scenario-based access points for different vertical markets.
Enterprise Border Session Controller (E-SBC) for Network Inter-Connectivity.
AnyConnect Gateway protects enterprise networks from attacks with topology hiding and provides secure delivery of SIP, voice, and video conferencing services. AnyConnect Gateway supports TLS encryption for secure SIP signaling and SRTP encryption and VPN connections for secure data transport with confidentiality, message authentication, and replay protection. Together these protocols protect voice, video conferencing, and unified communications from eavesdroppers, hackers and spoofers.
Z-Com is a professional wireless networking company established in 1995 that focuses on R&D, design, and manufacturing of wireless and LTE products. It has over 1000 employees across locations in Taiwan, China, USA, and Europe. Z-Com offers a variety of wireless products including cloud-based Wi-Fi management platforms, outdoor backhaul devices, and integrated LTE and Wi-Fi solutions.
This document provides an overview of wireless networking configuration and tools for OpenWrt. It discusses wireless configuration using UCI, hardware modes, encryption types, and tools like iwconfig, iwpriv, and iwlist. It also covers Linux wireless concepts like mac80211 and cfg80211, as well as Qualcomm Atheros driver models and testing scripts for changing wireless settings.
The purpose of this guide is to explain the enhancements in 802.11ac standard and provide guidance towards
migrating to 802.11ac with respect to network design, deployment, and configuration best practices for campus environments like offices, university campus, and dorm environments.
This guide covers the following topics in detail:
- Summary of Recommendations
- 802.11ac Features and Benefits
- 802.11ac Planning and Deployment Guidelines
- Best Practice Recommendations for Deploying 802.11ac WLANs
This guide is intended for those who are willing to learn about the 802.11ac standards and understand the best practices in deploying a high-performing 802.11ac
This document provides instructions for configuring IPv6 static routes on Huawei routers. It describes assigning IPv6 addresses to router interfaces, configuring static routes between routers, and setting default gateways for hosts. Static routes must be configured to ensure communication between any two hosts. The procedure configures Router A, Router B, and Router C with static routes so that hosts in different VLANs can use the appropriate router as their gateway.
The document provides instructions for configuring Ethernet interfaces and link aggregation on Huawei switches. It includes:
1) Manually setting the line rate and duplex mode of Ethernet interfaces on switches S1 and S2 to 100Mbps full duplex.
2) Creating an Ethernet trunk (Eth-Trunk 1) on S1 and S2 and adding interfaces G0/0/9 and G0/0/10 to configure manual link aggregation between the switches.
3) Deleting the manual link aggregation configurations in preparation for configuring static LACP mode aggregation on the same interfaces.
The document introduces Aruba's new 7200 Controller Series, which provides improved performance, scale, and cost savings compared to prior solutions. Key points include:
- The 7200 series supports up to 2048 access points, 32,000 clients, and 40Gbps of throughput to handle more bandwidth-intensive applications and 802.11ac networks.
- Aruba's AppRF technology analyzes traffic and prioritizes applications like voice and video for improved quality of experience.
- Models range from the 7210 for small/medium deployments up to the 7240 for large enterprises, with pricing nearly half of comparable Cisco solutions.
- Aruba is offering migration incentives include license transfers from existing
Ruijie Networks is a Chinese networking company that produces WiFi access points and controllers. Over the past decade, Ruijie has grown to become a top networking vendor in China with over 300 R&D employees and annual sales exceeding $200 million by 2009. Some key milestones include releasing their first 11ac product in 2011, achieving the number 2 market share in China by 2015, and becoming the top vendor for WiFi 6 products in China with over 40% market share by 2019. Ruijie continues to invest in new WiFi technologies like 802.11ax and develop scenario-based access points for different vertical markets.
Enterprise Border Session Controller (E-SBC) for Network Inter-Connectivity.
AnyConnect Gateway protects enterprise networks from attacks with topology hiding and provides secure delivery of SIP, voice, and video conferencing services. AnyConnect Gateway supports TLS encryption for secure SIP signaling and SRTP encryption and VPN connections for secure data transport with confidentiality, message authentication, and replay protection. Together these protocols protect voice, video conferencing, and unified communications from eavesdroppers, hackers and spoofers.
Z-Com is a professional wireless networking company established in 1995 that focuses on R&D, design, and manufacturing of wireless and LTE products. It has over 1000 employees across locations in Taiwan, China, USA, and Europe. Z-Com offers a variety of wireless products including cloud-based Wi-Fi management platforms, outdoor backhaul devices, and integrated LTE and Wi-Fi solutions.
NVK is a leading wireless solutions provider in Thailand. They have deployed over 300,000 EnGenius access points nationwide for metro WiFi networks, wireless ISPs, and hotspot services. NVK offers a range of WiFi products and professional services, and has experience designing various WiFi network architectures including metro WiFi, MDU/MTU, campus, enterprise, and fixed wireless networks. They provide full WiFi solutions including access points, switches, authentication systems, and network management platforms.
The Allied Telesis x610 Series switches provide scalable and high-performing networking solutions for businesses. The switches are available in 24-port and 48-port models with optional 10GbE uplinks, and can be stacked together to scale up to eight units. They feature fully non-blocking switching on all ports, powerful network management tools, and high availability through stacking and ring protection technologies. The switches also offer security, quality of service, and power over Ethernet capabilities.
This document describes the OptiX RTN 900 microwave transmission system from Huawei. It discusses the network position and applications of the RTN 900, which can provide integrated TDM, hybrid, and packet microwave solutions. The document then covers the system architecture, including functional units, and the hardware structure. It describes the different boards that make up the RTN 900 system, including the control, interface, and auxiliary boards.
This document contains the resume of Waheed Ahmed Qamar. It outlines his objective of serving an organization to the fullest with his networking and security skills. It details his academic and professional qualifications including various Cisco and Microsoft certifications. It provides a summary of his over 11 years of work experience in networking and security roles for various companies in Germany, Dubai, and Pakistan, demonstrating experience with Cisco routers, switches, firewalls and other networking equipment.
This document is a resume for Abdelrhman Saad, an Egyptian network engineer seeking a challenging position to develop his communication engineering skills. It summarizes his professional experience managing networks for Cairo International Airport, Iccc-Cairo, UNICOMP, and Raya Networks. It also lists his IT certifications and provides details on networking projects he has worked on for various companies. The resume concludes with his personal and education details.
The document discusses Aruba's networking portfolio and solutions for campus, branch, and data center networks. It highlights Aruba's new CX switching portfolio which features a common operating system and architecture across edge access to the data center. The CX switches are designed to address customer challenges around legacy networks not keeping pace with digital transformation needs. The document also covers Aruba's Wi-Fi 6 access point portfolio and the benefits of Wi-Fi 6 technology.
The Alcatel-Lucent OmniSwitch™ 6850E Stackable LAN Switch (SLS) is the latest advanced stackable Gigabit Ethernet switch in the OmniSwitch family of products. http://enterprise.alcatel-lucent.com/?product=OmniSwitch6850E&page=overview
Eng. Abd Elrhman has over 10 years of experience in network administration and seeks a challenging position to further develop his skills. He has extensive experience designing, implementing, and troubleshooting networks and infrastructures. Some of his qualifications include Cisco certifications, experience with Active Directory, WAN/LAN administration, real-time systems, security, and team leadership.
The EHWIC-4ESG is a Cisco Ethernet interface card with 4 10/100/1000 Ethernet ports that integrates with Cisco Integrated Services Routers. When installed, it provides LAN connectivity, Layer 2 switching, security, QoS, routing, and voice gateway capabilities. It supports common management protocols and redundancy protocols. Accessories include SFP transceiver modules and it is compatible with many Cisco router platforms.
This document discusses the transformation of the telecommunications industry towards digital technologies and software-defined networks. It specifically focuses on software-defined wide area networks (SD-WAN) and how SD-WAN is driving the adoption of network functions virtualization infrastructure (NFVi) and universal customer premise equipment (uCPE). The document provides an overview of SD-WAN and uCPE deployment options, reference architectures, and Intel's product portfolio for enabling virtualized network functions on uCPE devices.
Robert Beardon has over 20 years of experience deploying and supporting wireless, network, and security systems across many industries and countries. He is skilled in technologies like Cisco wireless, firewalls, switches, and routers. His experience includes designing and implementing large wireless networks, security policies, and troubleshooting complex issues. He is currently a senior network/security engineer at a UK healthcare trust where he has redesigned their wireless network and helped optimize helpdesk operations.
The document discusses the integration of Wi-Fi access networks into the Evolved Packet Core (EPC) mobile network. It describes how Wi-Fi can be used to offload data traffic from licensed 3GPP networks using both trusted and untrusted Wi-Fi connections. For trusted connections, the Wi-Fi access network is directly integrated into the EPC using a Trusted WLAN Access Gateway. For untrusted connections, an IPsec tunnel is established between the user device and the Evolved Packet Data Gateway for authentication. The document also discusses various enhancements to support Wi-Fi calling and multiple concurrent connections over both cellular and Wi-Fi.
HPE Aruba provides wired and wireless networking solutions including access points, switches, controllers, and management software. Key products include the Aruba controller series that centrally manages thin access points, the Instant AP series that provides controller-less access points, and switch series like the FlexCampus and OfficeConnect switches. HPE Aruba solutions are positioned as leaders in the Gartner Magic Quadrant and aim to provide secure, intelligent networks through a single platform.
NuggetLabs (Ccna labs) Industries is growing significantly. Due to space limitations, five employees currently share single cubicles…at the same time. While this is great for team building, these space limitations are now impacting business productivity.
This document provides an overview of remote networking deployments using Aruba Instant and remote access points. It defines remote APs as Aruba access points deployed at remote sites and plugged into a router connected to a modem. The document discusses the different modes remote APs can operate in, including tunnel mode where all traffic is forwarded through an IPsec tunnel, split-tunnel mode where corporate traffic uses the tunnel and local traffic is forwarded locally, and bridge mode where only control traffic uses the tunnel. It also provides an overview of the Aruba Instant architecture and features, such as the virtual controller, dynamic RADIUS proxy, guest access using a captive portal, mesh capabilities, and deployment guidelines.
Un nombre croissant de produits que l'on trouve en PME peut désormais être alimenté en PoE : les téléphones et caméras IP, les points d'accès. Suivant les produits utilisés, le budget PoE peut être très important, mais parfois un budget plus limité peut suffire. Avec le switch L2 GS2210-24LP, Zyxel élargit son offre de switch PoE, en associant les fonctionnalités de la gamme GS2210, à un budget PoE plus adapté aux réseaux moins gourmands.
Présenté par Fanny CLAVEL, Zyxel France
This document provides instructions for installing Huawei wireless base station hardware. It begins with an overview of wireless network systems and the hardware structure of Huawei's BTS3900 and DBS3900 base stations. The document then covers installation preparations, procedures for installing the wireless hardware components, and technical points to reference during installation. Key aspects addressed include the hardware configurations of the BTS3900 indoor and outdoor models as well as the DBS3900 distributed base station.
Building Production Ready Search Pipelines with Spark and MilvusZilliz
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
NVK is a leading wireless solutions provider in Thailand. They have deployed over 300,000 EnGenius access points nationwide for metro WiFi networks, wireless ISPs, and hotspot services. NVK offers a range of WiFi products and professional services, and has experience designing various WiFi network architectures including metro WiFi, MDU/MTU, campus, enterprise, and fixed wireless networks. They provide full WiFi solutions including access points, switches, authentication systems, and network management platforms.
The Allied Telesis x610 Series switches provide scalable and high-performing networking solutions for businesses. The switches are available in 24-port and 48-port models with optional 10GbE uplinks, and can be stacked together to scale up to eight units. They feature fully non-blocking switching on all ports, powerful network management tools, and high availability through stacking and ring protection technologies. The switches also offer security, quality of service, and power over Ethernet capabilities.
This document describes the OptiX RTN 900 microwave transmission system from Huawei. It discusses the network position and applications of the RTN 900, which can provide integrated TDM, hybrid, and packet microwave solutions. The document then covers the system architecture, including functional units, and the hardware structure. It describes the different boards that make up the RTN 900 system, including the control, interface, and auxiliary boards.
This document contains the resume of Waheed Ahmed Qamar. It outlines his objective of serving an organization to the fullest with his networking and security skills. It details his academic and professional qualifications including various Cisco and Microsoft certifications. It provides a summary of his over 11 years of work experience in networking and security roles for various companies in Germany, Dubai, and Pakistan, demonstrating experience with Cisco routers, switches, firewalls and other networking equipment.
This document is a resume for Abdelrhman Saad, an Egyptian network engineer seeking a challenging position to develop his communication engineering skills. It summarizes his professional experience managing networks for Cairo International Airport, Iccc-Cairo, UNICOMP, and Raya Networks. It also lists his IT certifications and provides details on networking projects he has worked on for various companies. The resume concludes with his personal and education details.
The document discusses Aruba's networking portfolio and solutions for campus, branch, and data center networks. It highlights Aruba's new CX switching portfolio which features a common operating system and architecture across edge access to the data center. The CX switches are designed to address customer challenges around legacy networks not keeping pace with digital transformation needs. The document also covers Aruba's Wi-Fi 6 access point portfolio and the benefits of Wi-Fi 6 technology.
The Alcatel-Lucent OmniSwitch™ 6850E Stackable LAN Switch (SLS) is the latest advanced stackable Gigabit Ethernet switch in the OmniSwitch family of products. http://enterprise.alcatel-lucent.com/?product=OmniSwitch6850E&page=overview
Eng. Abd Elrhman has over 10 years of experience in network administration and seeks a challenging position to further develop his skills. He has extensive experience designing, implementing, and troubleshooting networks and infrastructures. Some of his qualifications include Cisco certifications, experience with Active Directory, WAN/LAN administration, real-time systems, security, and team leadership.
The EHWIC-4ESG is a Cisco Ethernet interface card with 4 10/100/1000 Ethernet ports that integrates with Cisco Integrated Services Routers. When installed, it provides LAN connectivity, Layer 2 switching, security, QoS, routing, and voice gateway capabilities. It supports common management protocols and redundancy protocols. Accessories include SFP transceiver modules and it is compatible with many Cisco router platforms.
This document discusses the transformation of the telecommunications industry towards digital technologies and software-defined networks. It specifically focuses on software-defined wide area networks (SD-WAN) and how SD-WAN is driving the adoption of network functions virtualization infrastructure (NFVi) and universal customer premise equipment (uCPE). The document provides an overview of SD-WAN and uCPE deployment options, reference architectures, and Intel's product portfolio for enabling virtualized network functions on uCPE devices.
Robert Beardon has over 20 years of experience deploying and supporting wireless, network, and security systems across many industries and countries. He is skilled in technologies like Cisco wireless, firewalls, switches, and routers. His experience includes designing and implementing large wireless networks, security policies, and troubleshooting complex issues. He is currently a senior network/security engineer at a UK healthcare trust where he has redesigned their wireless network and helped optimize helpdesk operations.
The document discusses the integration of Wi-Fi access networks into the Evolved Packet Core (EPC) mobile network. It describes how Wi-Fi can be used to offload data traffic from licensed 3GPP networks using both trusted and untrusted Wi-Fi connections. For trusted connections, the Wi-Fi access network is directly integrated into the EPC using a Trusted WLAN Access Gateway. For untrusted connections, an IPsec tunnel is established between the user device and the Evolved Packet Data Gateway for authentication. The document also discusses various enhancements to support Wi-Fi calling and multiple concurrent connections over both cellular and Wi-Fi.
HPE Aruba provides wired and wireless networking solutions including access points, switches, controllers, and management software. Key products include the Aruba controller series that centrally manages thin access points, the Instant AP series that provides controller-less access points, and switch series like the FlexCampus and OfficeConnect switches. HPE Aruba solutions are positioned as leaders in the Gartner Magic Quadrant and aim to provide secure, intelligent networks through a single platform.
NuggetLabs (Ccna labs) Industries is growing significantly. Due to space limitations, five employees currently share single cubicles…at the same time. While this is great for team building, these space limitations are now impacting business productivity.
This document provides an overview of remote networking deployments using Aruba Instant and remote access points. It defines remote APs as Aruba access points deployed at remote sites and plugged into a router connected to a modem. The document discusses the different modes remote APs can operate in, including tunnel mode where all traffic is forwarded through an IPsec tunnel, split-tunnel mode where corporate traffic uses the tunnel and local traffic is forwarded locally, and bridge mode where only control traffic uses the tunnel. It also provides an overview of the Aruba Instant architecture and features, such as the virtual controller, dynamic RADIUS proxy, guest access using a captive portal, mesh capabilities, and deployment guidelines.
Un nombre croissant de produits que l'on trouve en PME peut désormais être alimenté en PoE : les téléphones et caméras IP, les points d'accès. Suivant les produits utilisés, le budget PoE peut être très important, mais parfois un budget plus limité peut suffire. Avec le switch L2 GS2210-24LP, Zyxel élargit son offre de switch PoE, en associant les fonctionnalités de la gamme GS2210, à un budget PoE plus adapté aux réseaux moins gourmands.
Présenté par Fanny CLAVEL, Zyxel France
This document provides instructions for installing Huawei wireless base station hardware. It begins with an overview of wireless network systems and the hardware structure of Huawei's BTS3900 and DBS3900 base stations. The document then covers installation preparations, procedures for installing the wireless hardware components, and technical points to reference during installation. Key aspects addressed include the hardware configurations of the BTS3900 indoor and outdoor models as well as the DBS3900 distributed base station.
Building Production Ready Search Pipelines with Spark and MilvusZilliz
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Programming Foundation Models with DSPy - Meetup SlidesZilliz
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Generating privacy-protected synthetic data using Secludy and MilvusZilliz
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Project Management Semester Long Project - Acuityjpupo2018
Acuity is an innovative learning app designed to transform the way you engage with knowledge. Powered by AI technology, Acuity takes complex topics and distills them into concise, interactive summaries that are easy to read & understand. Whether you're exploring the depths of quantum mechanics or seeking insight into historical events, Acuity provides the key information you need without the burden of lengthy texts.
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Driving Business Innovation: Latest Generative AI Advancements & Success StorySafe Software
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Ocean lotus Threat actors project by John Sitima 2024 (1).pptxSitimaJohn
Ocean Lotus cyber threat actors represent a sophisticated, persistent, and politically motivated group that poses a significant risk to organizations and individuals in the Southeast Asian region. Their continuous evolution and adaptability underscore the need for robust cybersecurity measures and international cooperation to identify and mitigate the threats posed by such advanced persistent threat groups.
UiPath Test Automation using UiPath Test Suite series, part 6DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
2. HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential 2
Contents
• AR V600R021C00 Products and Features
• Naming Conventions for NetEngine AR Series Products
• Huawei NetEngine AR8000 Series Enterprise Routers
• Typical Deployment Scenarios
• One Unified WAN—SRv6 BE
• Manual Deployment
• Configuration Differences Between AR8000 and AR600/AR6000/AR1000V
• Common Tools
3. HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential 3
AR V600R021C00 Products and Features
Hardware
Software Features
• Host:
New hardware: AR8140-12G10XG and AR8140-T-12G10XG (TPM model)
• Card:
None
• SD-WAN: Large-scale commercial use of AR8140 deployed as hub nodes
• SRv6 enterprise private line: Co-networking of both AR and NE routers, with services isolated through SRv6 BE
• DFX requirements: SPR switchover alarm suppression and keepalive packet loss calculation optimization
4. HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential 4
NetEngine AR8140-12G10XG
Naming Conventions for NetEngine AR Series Products
No. Meaning Description
A Product name AR: application and access routers
B Product platform 8: AR8000
C Router height
1: 1 U
2: 2 U
3: 3 U
D Maximum number of slots supported by the router
2: 2 slots
4: 4 slots
6: 6 slots
8: 8 slots
0: 10 slots
E
Product generation ID
Note:
This ID applies only to 1 U models. The default value is 0 for 2 U/3 U
models.
Generation of the hardware platform
F
Extended information about the router (optional).
Note:
This field starts with "-" and specifies supplementary interface descriptions
or other possible configurations.
nG: n GE interfaces
nXG: n 10GE interfaces
5. HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential 5
Huawei NetEngine AR8000 Series Enterprise Routers
AR8140 front view AR8140 rear view
Item AR8140
SD-WAN forwarding
(IMIX)
12–20 Gbit/s
SD-WAN forwarding
(1400 bytes)
25–36 Gbit/s
Dual power supplies 350 W AC/DC, pluggable, dual power supplies
Port
10 x 10GE optical + 8 x GE combo + 4 x GE electrical (All
WAN ports can be switched to LAN ports)
SIC slot 4
WSIC slot (default/maximum) 0/2
Memory 16 GB
Flash 4 GB
Operating temperature 0–45°C
Installation mode In cabinets
*Note: The SD-WAN forwarding performance model is EVPN+IPsec+HQoS. The
performance data is the sum of bidirectional data flows.
6. HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential 6
Typical Deployment Scenarios
SD-WAN Solution
• iMaster NCE provides unified visualized management.
• The NetEngine AR8140 can be used as the gateway of the enterprise headquarters or branch sites.
• Multiple types of physical links, such as MPLS private line and Internet.
• Broad range of SD-WAN features: intelligent application identification, intelligent traffic steering, etc.
Enterprise branch 1
Enterprise branch 2
MPLS/Private
line
7. HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential 7
One Unified WAN—SRv6 BE
Finance (branch access)
Government (Government extranet, government private network)
Electricity (Integrated data network, power supply station, business
hall, or substation access)
Hub
Hub
AR
AR
Option
A/DSCP
SRv6
SRv6
NCE-Campus NCE-IP
V
M
V
M
V
M
vSwitc
h
Data center
V
M
V
M
V
M
vSwitc
h
Level-1 branch
R R
R
R
Access to WAN
Branch
Access to WAN
V
M
V
M
V
M
vSwitc
h
Backbone WAN
NE NE
AR NE
Access
network
Backbone network DC
SRv6 SRv6
Customer requirements:
• Supports IPv6 services.
• Unified WAN architecture: EVPN+SRv6
• Reuse: ARs and NEs are deployed on the same network, and the customer
reuses the existing NE devices. The application scope of SRv6 is extended
from backbone nodes to edge nodes.
• Fine-grained path optimization: more refined underlay and overlay
optimization.
Huawei benefits:
• Larger market share: Extend to branches based on the advantages of
Huawei NE routers on financial backbone networks.
• Wider application scope: finance, electricity, government, carrier, etc. NE NE
Competitiveness:
• One unified WAN through SRv6.
SRv6 BE
AR supports SRv6 BE and
switchover based on BFD.
Controller: NE router management
by iMaster NCE-WAN, with co-
networking of both AR and NE
routers
AR8140
AR
8. HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential 8
Manual Deployment
Procedure:
1. Log in to the CLI of a device and perform pre-configuration on the device.
a. Enable NETCONF.
snetconf server enable
b. Configure an SSH user.
ssh user huawei
ssh user huawei authentication-type x509v3-rsa
ssh user huawei assign pki default
ssh user huawei service-type snetconf
c. Specify a source interface for the SSH server.
ssh server-source all-interface
d. Configure an SSH authentication mode.
ssh server assign pki default
ssh authorization-type default root
ssh server publickey x509v3-ssh-rsa
2. Create a VPN instance on the device.
ip vpn-instance underlay_1
ipv4-family
route-distinguisher route-distinguisher
vpn-target vpn-target export-extcommunity
vpn-target vpn-target import-extcommunity
3. Configure an IP address for the interface and bind it to a VPN instance.
interface interface-type interface-number
ip binding vpn-instance underlay_1
ip address ip-address mask
4. Configure routes to ensure that the device can communicate with iMaster NCE-Campus.
ip route-static vpn-instance underlay_1 ip-address mask nexthop-address
5. Set parameters for interconnection between the device and iMaster NCE-Campus based on ZTP configurations.
netconf
callhome default-callhome
endpoint GE0/0/1_192.168.10.10
peer-ip ip-address port 10020 vpn-instance underlay_1
Note:
The configured SSH user must be Huawei. Otherwise, the device
cannot register with the controller.
When adding an AR8000 series router, you need to set parameters for
interconnection between the device and iMaster NCE-Campus. The
device can be managed by iMaster NCE-Campus only after the
configuration is successful. The callhome name must be set to default-
callhome and IP-address must be the southbound address of iMaster
NCE-Campus.
The endpoint name must be in the format of name of the WAN link
interface used to register with iMaster NCE-Campus_IP address, for
example:
If the WAN link uses GE0/0/1 interface and the IP address
192.168.10.10, the endpoint name is GE0/0/1_192.168.10.10.
If the WAN link uses XGE0/0/1 interface and the IP address
192.168.10.10, the endpoint name is 10GE0/0/1_192.168.10.10.
If the WAN link uses Eth-Trunk1 interface and the IP address
192.168.10.10, the endpoint name is Eth-Trunk1_192.168.10.10.
9. HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential 9
NAT Configuration Differences Between AR8000 and
AR600/AR6000/AR1000V
Function AR600/AR6000/AR1000V AR8000
Easy IP
#
acl number 3180
rule 5 permit ip source 1.1.1.0 0.0.0.255
#
interface 10GE0/0/2
ip address 1.1.1.1 255.255.255.0
nat outbound 3000
#
#
interface 10GE0/0/2
ip address 1.1.1.1 255.255.255.0
nat enable
#
nat-policy
rule name policy_nat1
source-address 10.1.1.0 mask 255.255.255.0
action source-nat easy-ip
#
10. HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential 10
HQoS Configuration Differences Between AR8000 and
AR600/AR6000/AR1000V
11. HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential 11
Function Differences Between AR8000 and
AR600/AR6000/AR1000V
Function AR600/AR6000/AR1000V AR8000
Reverse SSH
Only some whitelist query
commands can be executed.
1. Only query and O&M commands can
be executed by default.
2. The AOC can be used to deliver the
unlocking instruction to grant the
command configuration permissions.
After the configuration, deliver the
locking instruction through the AOC to
revoke the permission.
Delivery of configurations
that are not supported by
the controller
Delivered through CLI over
YANG
Delivered through the AOC
12. HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential 12
1. Specifications query tool
https://info.support.huawei.com/network/sqt/index?domain=0&lang=e
n
Common Tools (1/2)