This document discusses the potential for solar energy to provide scalable electric power. It makes three key points:
1) Solar thermal electricity offers the greatest potential to provide base-load power at a large scale to replace fossil fuel plants, as the technology is maturing rapidly. Developments in thermal energy storage can make solar power reliable and available around the clock.
2) With carbon pricing or incentives, solar thermal could be competitive with new natural gas or coal plants within a few years. However, low-cost capital and transmission infrastructure are needed to enable large-scale deployment.
3) Key policy steps are needed, including a global carbon pricing scheme, renewable power standards, transmission infrastructure investment, and low
This presentation gives an overview on how our current unsustainable energy supply systems can be transformed to sustainable energy systems? There is a special focus on the challenges for developing countries. The findings are based on the book from Peter Hennicke & Susanne Bodach "Energierevolution - Effizienzsteigerung und erneuerbare Energien als neue globale Herausforderungen" (Oekon Verlag 2010).
Presentation held on World Environment Day 2010 (2010-06-06) in Kathmandu, Nepal.
Giuseppe Zollino, Italian National Delegate FP7 Energy Committee - I programm...WEC Italia
Slides presentate in occasione del convegno "Le strategie europee di de-carbonizzazione - Quale ruolo per la Cattura e Stoccaggio della CO2?" organizzato il 16/05/2013 da WEC Italia e AIDIC in collaborazione con Energia Media
Il World Energy Focus, nuovo mensile online della WEC's community, una e-publication gratuita per essere sempre aggiornato sugli sviluppi del settore energetico. Il World Energy Focus contiene news, interviste esclusive e uno spazio dedicato agli eventi promossi dai singoli Comitati Nazionali.
Climate Change Mitigation & AdaptationLaurence Mills
Climate Change Plan
Renewable Technologies
Financial Assistance
Conservation & Efficiency
Mitigation with Technology
Global Climate Change
UK Energy Supply & Climate
Scotland\'s Projected Climate Changes
Climate Change Adaptation & Forward Planning
This presentation gives an overview on how our current unsustainable energy supply systems can be transformed to sustainable energy systems? There is a special focus on the challenges for developing countries. The findings are based on the book from Peter Hennicke & Susanne Bodach "Energierevolution - Effizienzsteigerung und erneuerbare Energien als neue globale Herausforderungen" (Oekon Verlag 2010).
Presentation held on World Environment Day 2010 (2010-06-06) in Kathmandu, Nepal.
Giuseppe Zollino, Italian National Delegate FP7 Energy Committee - I programm...WEC Italia
Slides presentate in occasione del convegno "Le strategie europee di de-carbonizzazione - Quale ruolo per la Cattura e Stoccaggio della CO2?" organizzato il 16/05/2013 da WEC Italia e AIDIC in collaborazione con Energia Media
Il World Energy Focus, nuovo mensile online della WEC's community, una e-publication gratuita per essere sempre aggiornato sugli sviluppi del settore energetico. Il World Energy Focus contiene news, interviste esclusive e uno spazio dedicato agli eventi promossi dai singoli Comitati Nazionali.
Climate Change Mitigation & AdaptationLaurence Mills
Climate Change Plan
Renewable Technologies
Financial Assistance
Conservation & Efficiency
Mitigation with Technology
Global Climate Change
UK Energy Supply & Climate
Scotland\'s Projected Climate Changes
Climate Change Adaptation & Forward Planning
Georg Erdmann, Prof. for Energy System at the Berlin University of Technology WEC Italia
Slides presentate in occasione del Seminario "The Energy transition in Europe: different pathways, same destination? organizzato da Edison in collaborazione con WEC Italia il 29 maggio 2013 a Roma - TWITTER #NRGstrategy
Mining is an energy-intensive industry, and energy is an
essential operational consideration. Energy access is becoming increasingly difficult and expensive in many regions of the world, with global energy prices leaping by 260% since 2000. Falling grades require more energy to extract each tonne of mineral. Miners are grappling with these increasing costs while commodity prices tighten, resulting in ever-narrowing operating margins.
My research at the University when I was doing Project Management was based on the Reduction of CO2 to minimize Carbon Emission Tax for Industries, I am a strategist coming to such ideas and this presentation is extremely minor example hence I offer it for free online, you can contact me regarding any Project you are involved in and I will be happy to assist as a Consultant, Freelancer or Business Development. #Project Managers
Jochem 2002 Steps towards a 2000 Watt-Society Ex Summmorosini1952
Jochem E. et al (2002) Steps towards a 2000 Watt-Society. Developing a White Paper on Research & Development of Energy-Efficient Technologies - Executive Summary - 19 p.
Executive summary
In the coming decades, the threat and consequences of
climate change and of the re-concentration of crude oil
production in the Near East will compel industrialised nations
to make much more efficient use of energy. R&D that helps
realise energy efficiency potentials is likely to be regarded as
important in scientific, entrepreneurial, and political realms.
Demand for highly energy-efficient technologies will rise
steeply, and firms that can provide them will prosper. The
identification of energy-efficient technologies and related
energy conservation potentials undertaken in this pre-study is
a first step toward designing a R&D strategy that is consistent
with the need to evolve towards a 2000 Watt per capita society.
Reaching this level by 2050 implies reducing primary energy
use from 1200 to 460 PJ per year, despite a projected 65%
economic expansion.
Jochem, Eberhard; Favrat, Daniel; Hungerbühler, Konrad; Spreng, Daniel; von Rohr, Philippe-Rudolf; Wokaun, Alexander; Zimmermann, Mark
Future possibilities for utilization of solar energy serc 2009 05-20Stefan Larsson
This is a presentation about the growing field of solar fuels and the balanced carbon cycle concept (B3C) that I made during my research in how we save the climate of planet earth within the economic boundaries we have in the current energy system.
Fuel Cells are becoming the preferred alternate energy but unless the constraints are understood and dealt with it will not be adopted at the rate it should
Georg Erdmann, Prof. for Energy System at the Berlin University of Technology WEC Italia
Slides presentate in occasione del Seminario "The Energy transition in Europe: different pathways, same destination? organizzato da Edison in collaborazione con WEC Italia il 29 maggio 2013 a Roma - TWITTER #NRGstrategy
Mining is an energy-intensive industry, and energy is an
essential operational consideration. Energy access is becoming increasingly difficult and expensive in many regions of the world, with global energy prices leaping by 260% since 2000. Falling grades require more energy to extract each tonne of mineral. Miners are grappling with these increasing costs while commodity prices tighten, resulting in ever-narrowing operating margins.
My research at the University when I was doing Project Management was based on the Reduction of CO2 to minimize Carbon Emission Tax for Industries, I am a strategist coming to such ideas and this presentation is extremely minor example hence I offer it for free online, you can contact me regarding any Project you are involved in and I will be happy to assist as a Consultant, Freelancer or Business Development. #Project Managers
Jochem 2002 Steps towards a 2000 Watt-Society Ex Summmorosini1952
Jochem E. et al (2002) Steps towards a 2000 Watt-Society. Developing a White Paper on Research & Development of Energy-Efficient Technologies - Executive Summary - 19 p.
Executive summary
In the coming decades, the threat and consequences of
climate change and of the re-concentration of crude oil
production in the Near East will compel industrialised nations
to make much more efficient use of energy. R&D that helps
realise energy efficiency potentials is likely to be regarded as
important in scientific, entrepreneurial, and political realms.
Demand for highly energy-efficient technologies will rise
steeply, and firms that can provide them will prosper. The
identification of energy-efficient technologies and related
energy conservation potentials undertaken in this pre-study is
a first step toward designing a R&D strategy that is consistent
with the need to evolve towards a 2000 Watt per capita society.
Reaching this level by 2050 implies reducing primary energy
use from 1200 to 460 PJ per year, despite a projected 65%
economic expansion.
Jochem, Eberhard; Favrat, Daniel; Hungerbühler, Konrad; Spreng, Daniel; von Rohr, Philippe-Rudolf; Wokaun, Alexander; Zimmermann, Mark
Future possibilities for utilization of solar energy serc 2009 05-20Stefan Larsson
This is a presentation about the growing field of solar fuels and the balanced carbon cycle concept (B3C) that I made during my research in how we save the climate of planet earth within the economic boundaries we have in the current energy system.
Fuel Cells are becoming the preferred alternate energy but unless the constraints are understood and dealt with it will not be adopted at the rate it should
Webinaire : Innovation et infrastructure - Moteurs de la transition energetiq...Cluster TWEED
Découvrez les opportunités liées aux innovations technologiques et nouvelles infrastructures durables initiées par la transition énergétique, par le biais des présentations du directeur du Innovation & Technology Center de l'Agence internationale pour les énergies renouvelables, et du coordinateur du programme Sustainable Cities and Settlements de la division Energy Systems and Infrastructure de l'UNIDO.
The need for expanded nuclear energy is urgent. Global energy demand is expected to grow by at least 50% by 2035, with electric demand in the developing world expected to triple.
Presently, more than one billion people completely lack electricity access and billions more consume one tenth or less of the electricity per capita consumed in the OECD. Much of that supply is intermittent.
At the same time, 81% of the world’s energy, and two thirds of the world’s electricity, is derived from fossil fuels, while emissions from fossil fuel combustion are a major factor driving global climate change.
The Global CCS Institute presented a workshop at the American Institute of Chemical Engineers (AIChE) ‘Carbon Management Technology Conference’ in Alexandria, Virginia on 20 October 2013.
High Efficiency - A Green Revolution In Dc PowerEltek
An Eltek Valere Whitepaper:
How a revolution in DC Power Systems can reduce electricity usage and carbon emissions.
energy for the Telecom Industry.
For more information, visit www.eltekvalere.com
Similar to Scalable Electric Power From Solar Energy (20)
Introduction to the Compassionate Systems Framework in SchoolsGlenn Klith Andersen
In education, where interest in social and emotional learning (SEL), mindfulness, and systems thinking is growing, we find both an opportunity and a need to develop models of thinking and teaching that prepare students to better understand and respond to the systems to which these issues belong. We draw from established SEL models, together with developments in the emerging field of complexity science and the study of systems, to establish a framework—what we call a “compassionate systems” framework—for building a cognitive and affective foundation for global citizenship. This framework conceptualizes compassion as an essentially systemic property of mind: to cultivate compassion is to be able to appreciate the systemic forces that influence people’s feelings, thoughts and actions.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Le nuove frontiere dell'AI nell'RPA con UiPath Autopilot™UiPathCommunity
In questo evento online gratuito, organizzato dalla Community Italiana di UiPath, potrai esplorare le nuove funzionalità di Autopilot, il tool che integra l'Intelligenza Artificiale nei processi di sviluppo e utilizzo delle Automazioni.
📕 Vedremo insieme alcuni esempi dell'utilizzo di Autopilot in diversi tool della Suite UiPath:
Autopilot per Studio Web
Autopilot per Studio
Autopilot per Apps
Clipboard AI
GenAI applicata alla Document Understanding
👨🏫👨💻 Speakers:
Stefano Negro, UiPath MVPx3, RPA Tech Lead @ BSP Consultant
Flavio Martinelli, UiPath MVP 2023, Technical Account Manager @UiPath
Andrei Tasca, RPA Solutions Team Lead @NTT Data
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Generative AI Deep Dive: Advancing from Proof of Concept to ProductionAggregage
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
3. Executive Summary
• Electric power generation accounts for 40 percent of human-generated carbon
emissions. Solar energy can provide a material part of global low-carbon
electricity needs at costs directly competitive with fossil alternatives, and can
meet “utility grade” power quality, cost and reliability requirements. In addition to
significant emissions reduction and environmental benefits, solar offers sharply
reduced supply and commodity risk.
• Three primary solar technologies – solar thermal electricity, photovoltaic solar
(PV), and solar heating – are maturing rapidly, on a fast-declining cost curve. Solar
thermal electricity offers the greatest potential for base-load, large-scale power
to replace fossil fuel power plants at low technical risk. Photovoltaic solar power
can help meet peak load and distributed power needs and could scale rapidly if PV
efficiency and storage technology developments accelerate. Solar heating can
displace fossil fuel use in residential and industrial uses as process heat.
• With the implementation of an effective carbon credit pricing mechanism or the
continuation of current incentives, solar thermal technology can be competitive
with electricity from today’s new natural gas or Integrated Gasification Combined
Cycle (IGCC) coal power plant at “risk adjusted” prices. Low cost capital for plant
financing and investment in grid transmission is required to enable this. Costs
of competing power sources are underestimated and will rise as costs for
externalities like carbon or other pollution are included, providing incentives
for scaling up solar.
• Four primary policy steps need to be taken: the adoption of a global carbon pricing
scheme; the implementation of national, regional and global renewable power
standards; an increased focus on regional/continental power transmission; and
making available low-cost capital for low-carbon power generation. Our goal
should be to increase global “optionality” to accommodate technological
surprises.
Recommendations
a) Decisions required immediately:
• Expansion of technology-neutral, Renewable Portfolio Standards to encourage
competitive technology development and deployment to meet decarbonisation
needs at the lowest cost of energy.
• Stability of current US and European incentive schemes, along with clear
mechanisms for definition and evaluation, and metrics for the new technologies.
Time of day pricing will make solar more competitive.
• Formation of large-scale, low-cost capital to underwrite low-carbon energy
projects, suitable in scale to finance many individual projects of $100 million-$1
billion scale, and administered so as to support accelerated market entry of newer
technologies from early commercial stage to very large deployment.
b) By Copenhagen in December 2009 (COP 15):
• A commitment to build transmission infrastructure to scale solar thermal & PV
technology and create “solar parks” – locations with transmission, permitting and
infrastructure to support many gigawatts of solar generation each and
fundamental research in PV and storage technology. Transmission infrastructure
connecting high solar, wind and geothermal power production regions is required.
• Establishment of a framework for a carbon pricing scheme.
Breaking the Climate Deadlock
Briefing Paper
5. Scalable Electric Power
from Solar Energy
This paper explores the opportunity for low-carbon solar energy to provide a major part
of the world’s electric power generation needs – at costs competitive with conventional
power sources, within a short time. The paper covers:
• The potential and context for expanding solar power generation
• The current status and future prospects of solar technology
• The cost of solar power generation – understanding it, and reducing it to enable
rapid scale-up
• Key policy steps required
Why solar? Potential and context
Electric power generation creates more than 40 percent of human-generated carbon
dioxide (CO2) emissions worldwide, and is the fastest growing large source of carbon
emissions. A key challenge for economic decarbonisation is to transform the electrical
grid towards “near zero” carbon sources and away from coal, the current mainstay of
power generation.
Solar energy offers nearly unlimited potential to generate clean, carbon-free power. In
theory, about 1 percent of the world’s desert areas, if devoted to solar power generation
and linked to demand centres by high-voltage DC (HVDC) cables, could be sufficient to
meet total global electricity demand as forecast for 2001. Industry estimates are that
a 100 by 100 mile area in Nevada could meet the full electricity demand of the US, with
each square mile replacing one 17 megawatt (MW) coal fired power plant2. One percent
of India’s land could supply all its electricity needs in 200. Elsewhere, it has been
estimated that roughly percent of the land area of Morocco, devoted to solar power
generation, could provide all of Europe’s electricity needs. Similar calculations can be
made for, China, Africa and Australia. In most of these areas, the land required has little
alternative agricultural or other use.
All the world’s current and expected major electricity load centres are within practical
transmission range of excellent solar radiation locations. Western China, parts of India,
the Mediterranean region, Australia, North Africa, the Middle East and the south
western US are all ideal sites for large-scale generation projects (Exhibit 1); HVDC grid
transmission of power across thousands of miles is feasible from these strong solar
radiation zones. In many parts of the world the solar radiation is appropriate for cost
effective distributed solar PV.
Solar energy’s most significant advantage over traditional energy sources is
environmental. Concentrated solar plants (CSP) produce no CO2 or other emissions
during operation; by contrast, the average 00 MW coal plant produces .7 million tons
of CO2 annually, along with major releases of other greenhouse gases (GHG). Further,
the construction carbon costs of solar plants, relative to the carbon savings, are not
material over their lifetime.
Breaking the Climate Deadlock
Briefing Paper
6. Exhibit 1
Global Solar Irradiance
Map
Source
Ecole des Mines de Paris / Armines
2006
Yearly Mean of Irradiance in W/m2
0-10
10-20
20-0
0-40
40-0
0-0
0-70
70-80
80-90
90-100
100-110
110-120
120-10
10-140
140-10
10-10
10-170
170-180
180-190
190-200
200-210
210-220
220-20
20-240
240-20
20-20
20-270
270-280
280-290
However, if solar energy is to meet its potential and provide a significant proportion
of the world’s electric power, it must meet three key thresholds – for cost, availability
and reliability:
• The cost of energy must be directly competitive with new fossil fuel or nuclear
powered generation – no more than $0.10-0.12/kilowatt-hours (kWh) at equal
cost of capital, roughly the cost of new combined cycle natural gas plants today
in the US (2007 prices) or just above new Integrated Gasification Combined Cycle
(IGCC) coal plants without sequestration.
• Generation must be “dispatchable”: power must be available when utility
customers need it, not when it is convenient to produce. Energy storage will
therefore be required for intermittent resources such as the sun for utility needs,
except when matched to local peak load conditions. For solar thermal, storage is
relatively easy and can actually reduce the cost of providing power overall.
Significant potential exists to develop flow cell or other technologies for power
storage but cost effectiveness is critical.
• To achieve “utility grade” power generation, reliability and uptime of the power
source, by itself or in combination with other sources, should be on par with that
of current coal based power plants. This can be achieved by aggregation of distributed
sources or hybridization of multiple sources like solar, enhanced geothermal, wind
and natural gas, though it adds complexity to the management of the grid.
As this paper seeks to show, the rapid maturing of solar thermal technology puts it in a
strong position to meet all three of these thresholds beyond 201. With many companies
across many countries investing in large-scale centralized solar projects, solar power
is likely to be competitive against fossil fuel based generation in the developed world
within a few years, though developing world competitiveness may take longer. With
significant technology improvement and cost declines, solar photovoltaics used in
distributed fashion could provide substantial power generation too in the appropriate
geographies. Diverse technology approaches are making rapid progress. The massive
scalability and declining cost curves of the technologies mean that solar could displace
fossil based power generation quite rapidly, especially if carbon sequestration becomes
a requirement and adequate transmission capacity is built. (A new 200 MW solar power
plant can be built in two years after permitting. Distributed PV can be installed very rapidly).
Such a transition to solar power would bring significant advantages beyond the
environmental benefits already outlined. Notably, it would contribute to regional and
international security and stability, avoiding many of the challenges posed by fossil fuel
supply and nuclear fuel cycles. As the sun is a reliable, free source of power, solar energy
does not bear significant price variability, commodity or transportation risk, and would
Breaking the Climate Deadlock
Briefing Paper
7. allow economic growth without “energy shocks”. Risks such as terrorist attacks or
natural catastrophes could be mitigated through the wide distribution of power projects
throughout sunny regions and the availability of diverse backup fuel sources, including
natural gas. Further advantages of solar power include its potential complementarities
with water desalination, which would reduce the costs of both technologies.
Solar power has the potential to achieve unsubsidised market competitiveness at
scale in the developed world; and potentially also in the developing world, provided
cost of capital is sufficiently low. There are several steps that policymakers need to
take to allow solar to achieve this potential. A key one is to set a reliable long-term
carbon price, without which many of the required solar infrastructure investments will
remain unacceptably risky. And to promote the required scale and speed of technology
development and investment, governments and institutions will need to set standards
for renewable power generation, and facilitate the availability of low-cost project capital.
To preserve maximum ‘optionality’ given the critical and urgent need for carbon
reduction, policy should allow for a fair balance between allowing for surprising new
technology developments in solar, wind, storage, enhanced geothermal, carbon
sequestration, and other areas, while reinforcing the developments that are most likely
to succeed based on current “best knowledge” of cost and adoption risks or that offer
superior future technology trajectory. Essentially, the role of policy makers should be
to set an initial market through the usage of Renewable Power Standards and carbon
pricing mechanisms, and then let the best available technologies (that meet requisite
environmental standards) to compete, though consideration of future technology
trajectory may warrant additional consideration.
Solar technology – current status and future prospects
Solar energy is available in three different forms:
• Solar thermal power, which uses solar energy to generate steam in very large
configurations to run electricity generation turbines of equivalent size to coal
power plants.
• Photovoltaic panels, which directly convert solar radiation into electricity. This
technology could help meet peak load and distributed power needs, supporting
small power plants of below 0 MW
• Solar heaters, which convert solar radiation into hot water or air to be used for heat
or for other applications. This technology could displace fossil fuels in residential
and industrial uses.
Solar thermal power technology offers the greatest potential to produce base-load,
large-scale power that could replace fossil power plants (presently principally coal
based) at low technical risk and with characteristics similar to coal, thus reducing
adoption risk. The technology is maturing rapidly, amid aggressive competition amongst
suppliers. The key advantage of this technology is its capacity to store heat energy at
low cost, making “utility grade” solar power reliable and available around the clock (see
Exhibit 2). The development of new forms of heat storage is key to making solar thermal
power dispatchable at low cost; multiple thermal storage technologies are now at or
near commercial deployment, including systems using concrete, molten salt, and
pressurised water as the heat-storage element. Thermal storage systems with up to
12 to 1 hours are “free” – adding storage either reduces or leaves constant the cost per
kWh of energy while increasing the “capacity factor” and reliability of power generation
(because plant and capital utilization, the principal cost in solar technologies,
increases). Spain currently has two power stations with large-scale energy storage
coming on line, with five more in development.
Companies across many countries are investing in large-scale projects to advance
the design of solar mirror fields, which are used to gather sunlight and to heat steam
for solar thermal power. These designs are expected to be validated in full-scale
commercial operations of between 0 and 200 MW by 2010/11. The principal risk
remaining is one of cost per kilowatt of installed capacity; however, continued
optimization of manufacturing techniques and designs, with sufficient scale, will
significantly reduce costs and improve output efficiency. Many new kinds of cost
effective storage technologies also seem likely.
Breaking the Climate Deadlock 7
Briefing Paper
8. Further experimentation and research is likely to deliver greater sophistication in solar
thermal technology over the next decade or two. For example, hybridisation of solar
thermal plants with natural gas plants would allow for backup power to cater for rare
weather events, as well as supplementary power to enhance output and efficiency. Two
other hybridisation technologies are under research, one melding solar with wind based
generation; the other linking solar with enhanced geothermal technologies, which could
significantly reduce costs. Other configurations in concentrated solar thermal like dish
concentration with Stirling engine power generation are also innovating rapidly.
Exhibit 2
Illustrative Solar Thermal
Plant
Substation
Solar Field Thermal Energy Storage Generator
Steam Turbine
High pressure
steam 270°C
Air-Cooled /
Wet-cooled Condenser
Expansion Vesse
Photovoltaic panels and solar heaters, have an important role to play for distributed
generation especially with the development of low-cost power storage, where technical
development is being pursued with technologies like flow cells, hybridization with plug-
in automotive technologies, distributed aggregation and averaging and other approaches.
Their role currently is principally in distributed or remote power generation and they are
ideal in locations where peak power demand often coincides with maximum solar
radiation. Applications could expand dramatically as storage technology is developed
and costs decline. Current costs for wholesale power, central station installations are
about twice those of solar thermal technologies under the same financing assumptions.
On the other hand, distributed photovoltaic power has the potential to be broadly cost
effective in the near future in higher power cost OECD markets, or where air conditioning
is a big need, as in the south western US, India or the Middle East. High efficiency and
lower cost PV technologies are in development.
Photovoltaic cell technology is following a rapidly declining cost curve. The price of solar
modules is expected to fall from around $2 per watt today to $1 in the near future, with
the price per watt installed likely to fall from $-8 to $ per watt. However, “balance of
plant” costs, including power electronics and installation, are declining more slowly
and may become the dominant costs unless low cost high efficiency cells are developed.
Active research in this area is underway. Concentrated solar PV provides additional area
for innovation and cost reduction. Low cost tracking mechanisms including passive
tracking are also being tried to improve the output of each PV cell.
The development of effective storage mechanisms, such as flow cells, could make
photovoltaics a significantly more valuable base-load power source, and significant
research is warranted in this area. Hydrogen as a storage medium is also possible
further in the future, although efficiencies are currently low and costs high. Other
possibilities exist in combination with solar based hydrogen production and use for
“storage” via fuel cells. An important development would be to get acceptance of
large scale distributed generation and management among utilities.
8 Breaking the Climate Deadlock
Briefing Paper
9. Understanding, and reducing, the cost of solar power
How, then, does the cost of solar power technology compare to that of other
technologies? And, how can solar power rapidly become sufficiently cost-competitive
to provide a major part of the world’s electricity needs?
Current and projected costs of solar power
At the outset it is important to note that when renewable, developing technologies
are compared with older, stable technologies, there are multiple cost curves at play.
One is the cost escalation curve for raw materials like steel, which applies across the
board; the other is a technology improvement curve of various components that varies
significantly between technologies and components, making the greatest impact on
nascent technologies. Finally there is an “experience learning curve” as production gets
more efficient with scale and experience. This is particularly relevant to solar thermal
technology, which is on a rapidly declining technology and experience cost curve,
especially when it approaches scale. The “module” component of solar PV has a
similar fast improving technology and experience cost curve.
With current incentives in place in the US and in many European countries, solar
thermal power generation is approaching cost parity with, or is cheaper than, natural
gas or oil based power generation. The solar thermal power generation cost4 in California
is approximately US$0.14-0.1/kWh for new “best in class” construction starting today
(including US incentives), and is expected to fall to US$0.10-12 by 201 (including either
current incentives or carbon credits), provided plants are built at scale and in high solar
radiation zones. This compares with today’s US power generation cost from next
generation coal plants – $0.08-0.10 in the USA from new IGCC coal plants without
sequestration, and $0.10-0.12 per kWh for new natural gas combined cycle plants
without carbon sequestration. Costs depend materially on the year of “construction”
and “fuel pricing” and 2007 construction/materials cost is used as a base year in the
above estimates. Carbon credits costs at $0/ton would add roughly $0.0/kWh to coal
plants but sequestration costs could be substantially higher for the next decade or two.
Financing premium for unproven technologies or companies can add $0.02-0.0/kWh in
costs today which is expected to be eliminated for new construction starting in 201.
Exhibit 3
$/MWh Solar Thermal vs.
Fuel Cost OM Charge (Fixed Variable) Conventional Technologies
200 Carbon Tax @ $0 per ton Capital Charge – 2013
180
10
140
120
100
80
0
40
20
0
Nuclear IGCC Solar Natural Gas Coal Natural Gas
Thermal* Combined Cycle Peaker
Note
Data provided by Ausra for US plants of at least 175 MW; older CSP data has generally been for small, uneconomic plants and without
factoring improvements in technology. Additionally, here are many solar thermal competitors with varying cost profiles.
Breaking the Climate Deadlock 9
Briefing Paper
10. Exhibit provides an overview of the expected costs in 201 of solar thermal relative to
other power technologies; these are broken down by fuel, operations and maintenance,
capital charges and carbon tax. As these figures demonstrate, capital is by far the
largest factor in the cost of solar power today. This makes the cost of capital crucial to
solar energy’s viability. With access to the kind of low-cost capital that has historically
financed large-scale power projects such as nuclear, solar thermal technology could
produce electricity significantly more competitively. Exhibit 4 provides a representative
cost estimate for wholesale solar power production, including producers’ margins; it
demonstrates the major impact of the cost of capital on the price of electricity produced.
Exhibit shows the estimated variation in costs in other locations around the world.
Exhibit 4
Representative 2013 cost Interest rate on debt 3% 6% 8%
estimate for US wholesale United States Electricity costs US$/MWh (no investment tax credit-ITC) 1 1 19
concentrated solar power United States Electricity costs US$/MWh (0% ITC, % income tax) 88 10 117
production, including
producers’ margins
Assumptions: 80% debt, ** With 100% debt @ 3% for municipal utilities, no tax credits, current cost = US$115 MWH
Return On Equity (ROE)
12% in Arizona, USA,
wholesale prices including
producer margins)
Exhibit 5
Price variation estimates Location Cost variation relative to US
due to location (solar Brazil between -10% and +10%
radiation differences Western China between -10% and -20%
and local costs)
Spain between +10% and +20%
Morocco between -0% and -10%
Solar PV Cost Projections
Solar PV cost projections also show a rapidly declining cost curve – in the US, the
President’s Solar America Initiative (working with the Department of Energy) has
targeted grid parity for photovoltaics by 201 (assuming no “cost” to adding
dispatchability to the power). The Solar Energy Industry Association roadmap targets
costs reaching about $4 per watt installed by 2017. Active research is underway using
a wide variety of technical approaches and significant cost reductions are likely. They
key issue with distributed PV power is locations where people live may not broadly
meet the optimal solar conditions assumed below in Exhibit .
Exhibit 6
Projected future costs of 201 System Price ($/W) $4.00
Solar PV8 201 Electricity Costs ($/kWh) -- with tracking (2% capacity factor) 0.12 (without storage dispatchability)
201 Electricity Costs ($/kWh) -- without tracking (18% capacity factor) 0.18 (without storage dispatchability)
Though costs for concentrated solar PV are very design dependent and hard to estimate
without a specific design, they have the potential to significantly reduce cost per kWh.
Reducing the cost of solar power and achieving rapid scale-up
The establishment of clear, long-term price signals for carbon emissions will have
significant impact on the rate of investment and construction in the renewable energy
sector, including making solar power more competitive against fossil energy power
sources. Historically, concerns about swings in fossil fuel prices have dampened
investor enthusiasm in fixed-cost power options; market signals which result in CO2
costs of $0 a ton would establish a firmer base for solar power investments, and such
widespread deployment would in turn strengthen the price competitiveness of all solar
technologies. Even without a clear carbon price, non-carbon related environmental
regulations, such as restrictions on sulphur oxides and nitrous oxides, have increased
the cost of coal power plants and contributed to solar energy’s greater viability. The
volatility of fossil fuel prices has further strengthened solar power’s attractiveness.
With an appropriate cost of capital, supportive policies and sufficient transmission
capacity, solar power generation can scale very rapidly in the developed world as soon
10 Breaking the Climate Deadlock
Briefing Paper
11. as next generation plant designs are proven; a number of ventures with new solar
thermal plant designs are expected to come on line in 2010-11. A wide variety of solar
PV technologies are getting significant venture and research funding. In the developing
world, though, solar power faces a more challenging trajectory, given the high cost of
capital, limited electric grid capability, and limited pollution control requirements on
traditional coal power plants. With poor grid infrastructure photovoltaic solar may get
faster acceptance as costs decline.
Globally, solar thermal power capacity can grow by at least 0 percent per year from
2011/12 for the following 10-20 years; potentially up to 200 GW of new plant capacity
can be added each year, starting at a conservative 1-2 GW per year in 2012. These figures
are based on the growth rates observed in solar photovoltaic (which is also expected
to grow 0% per year) and wind capacity and the relative simplicity of the solar
technologies. This growth will be subject only to the limitations and build-out of the
power transmission grid, and the availability of low-cost capital. Demand for both solar
thermal and PV will depend on the cost of power production, though for scalability of
the technologies worldwide and especially in India and China, unsubsidized market
competitiveness will be key.
In the US, the National Renewable Energy Laboratory has identified the potential for
more than ,000 GW of solar thermal power in the south western US.9 Large scale
expansion would result in more competitive power generation than most fossil sources,
including natural gas, oil and new generation coal power plants, even at modest prices
of carbon.
Key policy steps required
The primary goal of public policy should be to set the rules under which the market can
operate, and to ensure that decision-making takes account of externalities such as
environmental impact, health costs, volatility of cost and supply, and energy security.
Policy towards solar power generation should therefore be directed at enabling the
technology to compete in the market, with full accounting for the cost of carbon and
other pollutants. There are four main policy steps required:
• Adoption of a global carbon pricing scheme
• Implementation of national, regional and global renewable power standards
• Increased focus on regional/continental power transmission for all
renewable technologies
• Making low-cost project capital available for low-carbon power generation
Each of these steps is outlined in turn.
Adoption of a global carbon pricing scheme
As discussed above, carbon price signals could drive a reduction in the cost of solar
power generation, but suitable frameworks have not yet been put in place. Carbon
“cap-and-trade” systems have thus far been inadequately administered, and political
tradeoffs have weakened these systems, allowing generous transitional concessions
to existing power producers. Without a reliable long-term carbon price floor, many
needed solar power infrastructure investments will remain unacceptably risky. The
implementation of an effective carbon-pricing mechanism is therefore an essential
policy step.
Implementation of national, regional and global renewable power standards
With the right policies, renewable electricity standards can play a significant role in
transforming the power generation sector.
One way to ensure real carbon reductions is to mandate ‘hard renewable technologies’
such as solar, wind and geothermal energy, for which the cradle-to-grave carbon cycle
can be clearly calculated. In the US, Renewable Portfolio Standards (RPS) at the state
level have had outstanding success: utilities have met their RPS requirements and have
deployed substantial amounts of wind power in doing so. Resulting production volumes
and associated learning curves have dropped the cost of US wind energy 20 times over
two decades; and electric utilities have become major owner/operators of wind
generation systems. Today more than half of US states have RPS in place10, and a
Breaking the Climate Deadlock 11
Briefing Paper
12. national RPS scheme seems plausible. Solar technologies have dropped in cost to the
point that they are now being taken up aggressively by utilities as part of meeting their
RPS mandates, with 4,000 MW of projects now in contract in the US.
A key advantage of RPS policies is that they leave market power in the hands of utilities,
rather than picking winning companies or technologies. As a result, fierce price
competition is the order of the day; new technologies which can disruptively reduce
costs are able to enter against more established alternatives; and cost reductions more
commonly associated with computer systems than energy systems have resulted. As
a result, typical kWh pricings for new solar thermal electric plants in the US under RPS
(US$0.1-0.1 for new bids in California) are less than half the current feed-in law rates
in Spain (€0.27 as of 2007), in part because larger scale power plants are being planned
in the US.11
There is wide support amongst electricity end-users for standards such as RPS:
a 2007 poll found that clean electric power standards are by far the most popular and
acceptable approach to decarbonisation among Americans, even if they result in higher
costs for electric power.12
For the next two decades, until low-carbon alternatives such as solar mature and
decline in cost, it will helpful to put in place escalating renewable electricity generation
standards for “utility grade power” in each country. This will provide guaranteed
markets for the most cost competitive low-carbon technologies, assisting them to move
further down the cost curve. The implementation of renewable power standards will
make it feasible for immature technologies such as solar to compete with highly cost
reduced and optimised older fossil technologies which currently enjoy a range of
advantages – including scale, previous subsidies, fully amortised infrastructure, lack
of accounting for externalities like health and pollution costs, and in many cases help
from subsidised or protected industries such as railroads and coal mining. A standards-
based approach is preferable to uneconomic feed-in tariffs, unless the tariff has a
declining premium over fossil electricity over time and scale. The renewable electricity
standard can include “escape valves”, which would kick in if the price of renewable
electricity were more than an ‘X’ percent premium over fossil electricity, where ‘X’
should be a declining number over time.
Increased focus on regional/continental power transmission
Achieving large-scale renewable generation at low cost depends on establishing
plants at the lowest-cost, high solar radiation sites; this will be made possible by the
development of transmission corridors to move energy from those sites to where the
loads are required. Technology is not a significant barrier to improved transmission:
long distance transmission technologies are commercially available from a wide range
of suppliers, and make it economically feasible to move electrical energy many
thousands of miles.
The major challenge in transmission is in policy and co-ordination. In the US, for
example, long distance power transmission has been the major barrier to the success
of RPS implementation in certain regions: challenges in financing, permitting and pricing
transmission systems have created nearly insurmountable obstacles. In the US today,
thousands of MW of wind projects are stalled, awaiting transmission across state lines,
while many solar power deployments are experiencing similar challenges, with parochial
regulators blocking transmission projects. In Europe, where excellent and complementary
renewable resources are located thousands of miles apart, coordination of generation
presents a major challenge and opportunity for policymakers. Interconnection and
strong transmission grids will help all renewable, and fossil, technologies.
A major step which can be taken in the developed world is the creation of large
(potentially continent-wide) “solar park regions”, with a staged plan for 1-20 GW of
transmission into the countries’ or continent’s major grid; this would allow rapid
development of solar projects by private industry in each country. The DESERTEC
proposal, for example, would tie European countries into a “supergrid” – bringing
Norwegian hydro power, North Sea wind and Mediterranean solar power to every
country. Such an integrated approach would result in the lowest costs and highest
reliability for large-scale clean power. How would a continental approach of this kind
impact a country like the UK, which is distant from the high solar radiation locations
12 Breaking the Climate Deadlock
Briefing Paper
13. of Southern Europe and North Africa and thus faces challenges in taking advantage of
the world’s solar energy opportunity? Exhibit 7 shows one company’s view (ABB) of how
distant solar sources can be mingled with UK wind and other resources in an advanced
European high voltage electricity grid1.
Exhibit 7
Europe 20XX Scenario Potential European
Transmission Grid Scenario
Hydro Source
200 GW ABB (Personal Communication)
Wind
300 GW
25000 km sq
5000 x 10km
Canles (Solar)
140 pairs of
Solar 5GW and
700GW 3000km each
8000km sq
90 x 90 km
Making low-cost project capital available for low-carbon power generation
On the financial side, governments and institutions can facilitate the availability of low-
cost capital for project debt or distributed solar implementation, which will reduce the
cost of power generation from solar and other low-carbon technologies that have high
capital costs, low operating costs, and low externalities. This can help such technologies
to achieve unsubsidised market competitiveness over a short timeframe. Low cost
capital can be justified on the basis of low externalities and hence lower social costs.
For the developing world, a very low cost of capital for renewable electricity projects –
combined with investment in the transmission grid – would significantly change the
balance in favour of low-carbon technologies. India and China, for example, can scale
domestic solar thermal power production rapidly to meet all their incremental power
needs, given sufficient investment in power transmission; in their case, though, the cost
of capital will need to be extremely low to compete with low-cost coal power, which
faces limited environmental regulations. At a - percent interest rate and with
substantial capital loans, solar thermal may well become more economic than coal
power plants in many other parts of the world. Low capital costs will also help to make
solar photovoltaics competitive for distributed or remote rural power generations.
Other financial approaches are possible. Policies such as the German feed-in tariff,
which significantly raise the price of renewable energy, are useful in the early stages of
technology market introduction when new industries are weak and market development
is immature. However, the prices must be reduced relatively quickly in order to avoid a
distortion of the economy, in which mature but uneconomical technologies are rewarded.
Breaking the Climate Deadlock 1
Briefing Paper
14. 14 Breaking the Climate Deadlock
Briefing Paper
15. Glossary of Terms
CSP: Concentrated Solar Power
GHG: Greenhouse gas
GW: Gigawatts
IGCC: Integrated Gasification Combined Cycle
HVDC: High voltage DC
kW: Kilowatt
kWh: Kilowatt-hour
MW: Megawatts
MWH: Megawatt hour
OM: Operation and maintenance costs
PV: Photovoltaic
RPS: Renewable Portfolio Standards
Breaking the Climate Deadlock 1
Briefing Paper
16. 1 Breaking the Climate Deadlock
Briefing Paper
17. Endnotes
1
Philibert, C: Barriers to the diffusion of solar thermal technologies. OECD and IEA Information Paper, International Energy Agency,
Paris, 2006; World energy outlook 2006. International Energy Agency, OECD Publication Service, OECD, Paris. www.iea.org
2
www.ausra.com/pdfs/SolarThermal101_final.pdf
3
“National Action Plan on Climate Change”, Government of India – Prime Minister’s Council on Climate Change, June 2008
4
Note that solar thermal cost estimates are based on current “average” bids received by electricity utilities for “100 MW+ scale”
next generation plants in California form a myriad of private companies, and projections of their expected costs in 2013 and beyond.
5
“Economic, Energy, and Environmental Benefits of Concentrating Solar Power in California”, Black and Veatch, April 2006
6
Carbon credits not included; Data provides averages based on Ausra’s solar thermal power plant designs and actual cost estimates
for 175 MW plant starting construction in 2009 and extrapolated to 2013 plants with known technology development expectations;
current average bids from multiple suppliers in California to utilities for long term power contracts are about US$0.14/kWh.
7
“Our Solar Power Future: The US Photovoltaics Industry Roadmap through 2030 and Beyond”, SEIA, September 2004,
8
Baseline costs are projected based on tax credits (in the US), Cost calculation assumptions: costs included tracking designs;
accelerated depreciation; 8% real discount rate; operation and maintenance (OM) cost per inverter manufacturers’
recommendations (roughly half of solar thermal OM costs).
9
Mark S. Mehos and David W. Kearney, “Tackling Climate Change in the U.S.: Potential Carbon Emissions Reductions from
Concentrating Solar Power by 2030,” in Charles F. Kutscher, ed., American Solar Energy Society, Tackling Climate Change in the U.S.:
Potential Carbon Emissions Reductions from Energy Efficiency and Renewable Energy by 2030, 2007.
10
United States Department of Energy - http://www.eere.energy.gov/states/maps/renewable_portfolio_states.cfm#map
11
United States rates – http://www.iht.com/articles/2007/07/25/business/solar.php
Spanish rates (Royal Decree 661) - http://www.environmental-finance.com/onlinews/0605con.html
Original Spanish legislation: http://www.solarpaces.org/Library/Legislation/docs/RD6612007.pdf
12
New Scientist - http://environment.newscientist.com/channel/earth/mg19426091.500
13
This depiction was original conceived in 1992 but its application remains valid.
Breaking the Climate Deadlock 17
Briefing Paper
18. 18 Breaking the Climate Deadlock
Briefing Paper
19. Acknowledgements
The views expressed in this paper are those of the author and do not necessarily reflect
the position or views of the Breaking the Deadlock Project, The Climate Group, or the
Office of Tony Blair. Any factual errors are the sole responsibility of the author.
Breaking the Climate Deadlock 19
Briefing Paper