Satyajit Rout is seeking a position that allows him to utilize his technical skills and drive organizational progress. He has a diploma in mechanical engineering with over 10 years of experience in quality control and inspection. His experience includes working for JTEKT Sona Automotive India Ltd where he ensured quality of components and facilitated problem solving. He is proficient in CAD software like AutoCAD, PRO-E, and CATIA as well as CNC programming. He also has machine operation experience and skills in using measurement instruments for inspection.

1. SATYAJIT ROUT
bubusatyajit@gmai.com
At:-GAREI,VIA:RAHAMA
P.O:-LATHANGA Mob: +919853438632
Distt.:-JAGATSINGHPUR,PIN-754140
(ODISHA)
CARRIER OBJECTIVE
 To work in an organization where I can put my hard work and strong determination
towards the progress of the organization and take the organization and myself to
greater heights.
EDUCATIONAL QUALIFICATION
 10th
passed from Board of Secondary Education Odisha with 69% mark in the year Of
2007.
 Three years Diploma in Mechanical engg. from State Council for Technical Education
& Vocational Training (SCTE&VT) Odisha & passed with 75% marks in the year
2012.From MITS SCHOOL OF ENGG.
TECHNICAL QUALIFICATION
 One year training course in Post Diploma in Tool Design & Manufacturing
(CAD/CAM) from Central Tool Room & Training Centre under Ministry of MSME,
Bhubaneswar (ODISHA) with 83.21% marks in the year of 2013.
 CENTRAL TOOL ROOM AND TRAINING CENTRE is a govt. of India society
An Indo-Danish Project under Ministry of Micro, Small & medium
Enterprises (MSME).It is certified by (ISO 9001:2008 14001:2004 &
OHSAS 18001:2007).
SOFTWARE SKILLS
 Computer fundamental & MS-OFFICE.
 Basic and Advanced Modeling,2D & 3D Drawings and Drafting by using
AUTOCAD.
 Part Modeling, Detailing & Drawing, Part Assembly, Mold Design and PRO-
Manufacturing by using PRO-E.
 Surface Modeling, Drafting & Detailing and Press Tool Design by using CATIA.
 2D Drawings, 2D & 3D Tool path, and FANUC, HEIDENHAIN Control System by
using MASTER CAM & PART PROGRAMMING.
WORK EXPERIENCE
 Two plus years of experience in M/S JTEKT SONA Automotive India Ltd.
Associate as DET in Inspection & Quality Control Department from March
2013 to may 2015. Have Knowledge of GD&T, 7 QC TOOL, SPC, MSA, PPAP,
WHY-WHY ANALYSIS, 8-D PROBLEM SOLVING TOOL etc.
COMPANY PROFILE
JTEKT Corporation, JAPAN has established a new joint venture, JTEKT Sona
Automotive India Ltd. (JSAI) In India for the manufacture of column Electric
power Steering in Partnership with Sona koyo Steering Systems Ltd.
(SKSS).Manufacturing operations at JSAI, Which is located in the bawal
Industrial Area with in the Indian state of Haryana. JTEKT owns 51% of the
joint venture, and SKSS (also is located in Haryana and in which JTEKT holds a
20.1% share) owns 49% JTEKT SONA Automotive India Ltd. (JSAI is
manufacturing COLUMN ELECTRIC POWER STEERING.Jsai is tier-1 supplier of
CEPS supplying to Maruti Suzuki India Ltd, Renault Nissan Automotive India
Ltd, Toyota Kirloskar Motor Ltd. and Honda Car India LTD.

2. JOB PROFILE
 To ensure Quality of B.O.P & visit to vender premises to short out quality problems.
 Responsible to layout inspection as per schedule.
 To Inspect Incoming material from Supplier as per Sampling Plan.
 Provided inspection facilities for the development of new components.
 Inspection of samples on latest measuring machines like ROUNDNESS
TESTER,ROUGHNESS TESTER, COUNTER TESTER, PROFILE PROJECTOR, UTM.
 Responsible for raising the quality complaint Note against defects in BOP parts.
 Inspection of heat treated part on hardness tester(MICRO VICKER, VICKER &
ROCKWELL )
 Manpower handling as per plan.
 Preparing the inspection std.& Checke sheets for all BOP parts.
 Involvement in Manufacturing Machines Trial activities such as ITO, TTO, HVPT,
SOP to ensure supplier parts behavior during machining & assembly.
 New gauges & tooling inspection.
 Knowledge of engineering drawing and G D & T.
 Member of ASAICHI for In house rej. Analysis & countermeasure taken to reduce in
house rejection by using 7QC TOOL, 8D, WHY-WHY ANALYSIS.
 Doing Calibration & Validation of measuring- instruments & Gauge as per plan.
 To make MOM (Minutes of meeting) with gauges supplier n line rejection through QM &
Quality circle.
 Handling Supplier Complaints and Verifying Corrective Actions.
 To motivate associates for 5S, Kaizen, Quality Circle, Suggestion etc.
 To make check sheets (Instrument Verification, PDI, Inspection Reports, Critical check
sheets)
 Quality analysis & verification of regular running parts.
MACHINE SKILLS
 CNC Vertical machining centers(MILLING), turning centers(TURNING), with
programming Tool setting, job setting & EDM Mc.
 Various types of Cutting Tools,PRESS TOOL manufacturing&MOULDING mc.
 Tool Clamping Devices and Clamping Tool signature.
 Roundness Tester,Counter Tester,Profile Projector,utm m/c.
INSTRUMENT USING DETAILS
 Vernier Caliper.
 Micrometer.
 Height Gauge.
 Caliper Checker.
 Air Gauge Unit.
 Bore Gauge.
 Slip Gauge, Std Pin Gauge.
 Filler & Radius Gauge.
 Bevel Protector.
PROJECT WORKS
 HAND INJECTION MOULD
 PROGRESSIVE PRESS TOOL
TRAININGS ATTENDED
 5S& KAIZEN. JPS,7QC TOOL ,8-D, GD&T SYMBLE&WHY-WHY ANALYSIS.
 KAPS & KANBAN System.
 Safety Health & Environment.

3.  Team Building , Smart working & motivation.
 FMEA(failure mode & effective analysis).
STRENGTHS
 Good Team Member & Punctuality.
 Comprehensive problem solving abilities
PERSONAL INFORMATION
Name: Satyajit Rout
Father Name: Mr. Ajay kumar Rout
Date of Birth: 09 oct 1991
Gender: Male
Nationality: Indian
Community: Hindu
Marital Status: Single
Language Known: English,Hindi,Odiya
Hobbies: Study about drawings.
DECLARATION
I here by confirm that the information furnished above is correct to the best of
my knowledge.
Date:
Place:Odisha