The document provides safety tips for using various manual handling tools and electrical power tools. It recommends regularly inspecting and maintaining tools, wearing proper protective equipment, using the right tool for the job, keeping work areas clear, and storing tools safely. Specific tips are given for carrying tools on ladders, working at heights, securing workpieces, inspecting tools for damage, and using electric power tools, pneumatic tools, and fire extinguishers safely. Proper precautions like grounding, GFCIs, and following the PASS method are emphasized.

1. SAFETY TIPS OF ELECTRICAL POWER TOOLS

2. SAFETY TIPS OF MANUAL HANDLING TOOLS
 Regularly inspect tools to make sure they are in good shape and fit for use.
 Be sure to maintain your tools by performing regular maintenance, like grinding
or sharpening.
 Wear appropriate personal protective equipment, like(Hand gloves, safety
googles, safety shoes)
 Use the right tool for the job. In other words, don’t try to use a wrench as a
hammer.
 Make sure that your feet are planted on a stable and even surface.
 Be aware of the people around you and make sure they stay clear of the tools
you are using.
 Never carry tools up a ladder by hand. Instead, use a bucket or bag to hoist tools
from the ground to the worker.
 When working at heights, never leave tools lying out in the areas where they
could present a hazard to workers below.
 When appropriate, secure work with a clamp or vise to keep it from slipping.
 Never carry pointed tools in your pocket. Carry them in a toolbox or cart instead.
 Inspect your tools on a regular basis, checking for damage. Report damaged
tools to your supervisor.
 Make sure to keep extra tools handy in case the tool you had planned to use is
damaged.
 Make sure tools are stored in a safe place
 Never carry a power tool by its cord.
 Use tools that are double-insulated or have a three-pronged cord and are
plugged into a grounded
receptacle.
 Do not use electric tools in
wet conditions unless they
are approved for that use.
 Use a ground fault circuit
interrupter (GFCI) or an
assured grounding
program.
 Use appropriate PPE.

3. Safety tips for pneumatic tools:
 Verify that all parts of the tool are fastened securely before use.
 Never point a compressed air gun at yourself or another person.
 When you are finished using the tool, make sure that the pressure is
released before you break the hose connections.
 Use a safety clip or retainer to prevent attachments from being
ejected during operation, and use a chip guard when using high-
pressure compressed air for cleaning. Be sure to limit the nozzle
pressure to 30 pounds per square inch.
 Always wear eye protection.
 Use screens to protect nearby workers from flying fragments.
 Never leave your tool unattended.
 Never store a loaded air gun.

4. Safety tips for electric power tools:
 Use appropriate PPE like (hand gloves, safety googles ,H.V Jacket, Safety shoes)
 Dress for the job by avoiding loose clothing or articles that can get caught in a
tool’s moving parts, like jewelry.
 Use the safety guard as designed, inspect the abrasives warm up & inspect the
grinder to avoided fire hazards.
 Tighten the grinder Disc properly.
 Always maintain power tools control with two hands.
 Before use always check wheel of (Hand circular saw and bench mounted circular
saw proper blade rotation.
 Keep floors dry and clean to avoid slipping while working with or around
dangerous tools.
 Keep cords from presenting a tripping hazard.
 Never carry a power tool by its cord.
 Use tools that are double-insulated or have a three-pronged cord and are
plugged into a grounded receptacle.
 Do not use electric tools in wet conditions unless they are approved for that use.
 Use a ground fault circuit interrupter (GFCI) or an assured grounding program.

5. TYPES OF FIRE EXTINGUISHER
Fire Extinguisher Meaning:
A fire extinguisher is an active fire protection device for controlling or extinguishing small
accidental fires. During emergency situations, a fire extinguisher can control a small fire.
However, these devices should not be used for out-of-control fire events that endanger
the user. Usually, a fire extinguisher consists of a cylindrical pressure vessel containing
an agent that has the capability to extinguish a fire when discharged.
Classes of Fire Extinguisher
Depending on the specific fire types, fire extinguishers are also classified into six groups
as listed below:
Class A fire extinguisher: These fire extinguishers are used to put out class A fires
characterized by fire from ordinary solid or dust combustibles like wood, paper, textile,
plastic, fabric, cardboard, etc.
Class B fire extinguishers: Class B fire extinguishers are used to prevent Class B fire
hazards from flammable liquids like grease, gasoline, oil (except cooking oil), paint, etc.
Class C fire extinguisher: Class C fires originated from flammable gases like
methane, butane, propane, hydrogen, etc. are best handled using class C fire
extinguishers.
Class D fire extinguisher: Class D fire extinguishers are widely used to put out fires
generated from combustible metals, such as magnesium, sodium, potassium, lithium,
titanium, or aluminum.
Class E fire extinguisher: These fire extinguishers are used to extinguish fires that
originated from live electrical sources. However, in many countries, this is not
recognized as a separate fire class because once the electric power supply is switched
off it can be considered as any of the other five classes.
Class F fire extinguisher: Class F fire extinguishers find their use to extinguish class F
fires characterized by fires from cooking oils, vegetable oils, fats, butter, etc.

6. HOW TO USE FIRE EXTINGUISHER
The P.A.S.S Method for Fire Extinguishers
P: Pull the pin.
A: Aim low, pointing the nozzle or hose at the base of the fire
S: Squeeze the handle to release the extinguisher agent
S: Sweep from side to side at the base of the fire source
Until the fire is out.