We design and manufacture automatic machine for the PCBA/SMT and Thru-hole industries in Shenzhen China. We help companies looking to low cost equipment with smart, ROI-driven assembly equipment solutions.
shaoyong@smthelp.com
smthelp@vip.126.com
WhatsApp:+86 137 6048 1664
This SMT line can pick & place LED light and LED drive, if you want to build new LED Light and tube factory, please contact me to get good SMT line solutions. My Email address: angela_kuo@126.com or angelaguo1688@gmail.com Or Skype ID: angela7140.
This document provides specifications for the XRV series of linear motors from Electromate, including the XRV76, XRV97, and XRV115 models. It lists technical details such as continuous and peak forces, power requirements, load capacity, precision metrics, and part numbering conventions. The motors are available with various encoder and resolution options to suit positioning needs.
This document provides specifications for the RCP2CR-GRSS Cleanroom ROBO Cylinder 2-Finger Gripper Mini Slider Type including:
1) It has a stroke of 8mm, maximum gripping force of 14N, and maximum opening/closing speed of 30mm/s.
2) It can be operated with compatible controllers like the PMEC, PSEP, and PCON which support inputs like pulse trains, serial communication, and field networks.
3) Additional options include cable lengths up to 20m, as well as mounting brackets and a reversed home position.
The document provides information on linear stage systems from Nippon Pulse America, including their Nanopositioning SCR series of single-axis stages. It summarizes the specifications and features of several SCR stage models, including the SCR-050, SCR-075 and SCR-100. The stages integrate a slide guide, encoder and linear shaft motor to provide precise linear motion in a compact package suitable for applications requiring sub-micron resolution and accuracy. Curves show the acceleration and velocity capabilities for different motor configurations and loads.
The document provides specifications for Nippon Pulse linear shaft motors models S040D, S040T, and S040Q. It includes details on dimensions, electrical specifications like force, current and resistance, thermal specifications, force specifications, duty curves, shaft lengths, masses, lead wire and connector information. Tolerances for dimensions are provided in a table.
We design and manufacture automatic machine for the PCBA/SMT and Thru-hole industries in Shenzhen China. We help companies looking to low cost equipment with smart, ROI-driven assembly equipment solutions.
shaoyong@smthelp.com
smthelp@vip.126.com
WhatsApp:+86 137 6048 1664
This SMT line can pick & place LED light and LED drive, if you want to build new LED Light and tube factory, please contact me to get good SMT line solutions. My Email address: angela_kuo@126.com or angelaguo1688@gmail.com Or Skype ID: angela7140.
This document provides specifications for the XRV series of linear motors from Electromate, including the XRV76, XRV97, and XRV115 models. It lists technical details such as continuous and peak forces, power requirements, load capacity, precision metrics, and part numbering conventions. The motors are available with various encoder and resolution options to suit positioning needs.
This document provides specifications for the RCP2CR-GRSS Cleanroom ROBO Cylinder 2-Finger Gripper Mini Slider Type including:
1) It has a stroke of 8mm, maximum gripping force of 14N, and maximum opening/closing speed of 30mm/s.
2) It can be operated with compatible controllers like the PMEC, PSEP, and PCON which support inputs like pulse trains, serial communication, and field networks.
3) Additional options include cable lengths up to 20m, as well as mounting brackets and a reversed home position.
The document provides information on linear stage systems from Nippon Pulse America, including their Nanopositioning SCR series of single-axis stages. It summarizes the specifications and features of several SCR stage models, including the SCR-050, SCR-075 and SCR-100. The stages integrate a slide guide, encoder and linear shaft motor to provide precise linear motion in a compact package suitable for applications requiring sub-micron resolution and accuracy. Curves show the acceleration and velocity capabilities for different motor configurations and loads.
The document provides specifications for Nippon Pulse linear shaft motors models S040D, S040T, and S040Q. It includes details on dimensions, electrical specifications like force, current and resistance, thermal specifications, force specifications, duty curves, shaft lengths, masses, lead wire and connector information. Tolerances for dimensions are provided in a table.
The Macron 6 linear actuator can be customized with lengths up to 76.2 meters. It features repeatability of +/- 0.001 inches and accuracy of +/- 0.005 inches per 36 inches. It has a maximum speed of 400 inches per second and can provide acceleration exceeding 9 G's. The actuator uses a belt drive system and NEMA sized motors can be mounted in standard or custom configurations.
The document introduces several mechatronics cylinder models from Dyadic Systems for linear actuation. Key points:
- The cylinders range in price from $295 to $455 and can provide thrusts from 10kgF to 50kgF, with strokes from 50mm to 1,000mm.
- Features include programmable positioning, speed, acceleration, I/O signals and more.
- Dyadic claims its integrated motor, encoder and drive results in high accuracy, long life and low cost compared to other actuators.
- The document provides specifications for each cylinder model as well as an overview of available accessories and technical support contacts.
SMAC LCR16 Series Linear Rotary ActuatorElectromate
The LCR16 Series is a linear rotary actuator from MovingCoilActuators with a direct drive brushless servo motor. It has dimensions of 60 x 170 x 16 mm, a linear stroke of 15 mm, and peak force of 8 N at 1.5 amps of current. The actuator provides both linear and rotary motion in a single unit and is fully programmable for force, position, and velocity control.
The document contains specifications for the S20 surface mount technology machine. It lists the machine's board size capabilities, thickness range, transfer speed, placement speed and accuracy, component height limits, applicable component types and packages, inspection capabilities, user interface languages, board positioning features, component storage capabilities, dimensions, and weight. Key specs include a maximum board size of 1830x510mm, placement speed of 45,000 components per hour, placement accuracy of 40 microns, and support for components up to 30mm in height.
The MS400 Linear Actuator provides accurate positioning with thrust up to 400 lbs. and speeds up to 30 in/sec. It can replace pneumatic or hydraulic actuators requiring multiple positions. It integrates easily with machine controls via a DC brush or AC brushless servomotor. The stainless steel translation tube and wiper seal provide trouble-free operation for years. Various mounting options eliminate the need for custom brackets.
This document provides information on ServoBelt Linear drives manufactured by Bell-Everman, including:
- An overview of the ServoBelt Linear drive system, noting its high performance, low cost, limitless scalability, and ability to support multiple carriages and axes.
- Details on the part numbering system used to configure ServoBelt Linear drives.
- Specifications for the Light, Medium, and Heavy Duty models, including payload capacity, accuracy, speed, force and moment ratings, encoder options, and more.
We design and manufacture automatic machine for the PCBA/SMT and Thru-hole industries in Shenzhen China. We help companies looking to low cost equipment with smart, ROI-driven assembly equipment solutions. To watch the machine working video, please search: "Odd form insertion machine" in Youtube. Contact us today to learn how we can help you。 info@smthelp.com
Gordian Strapping StraPack RQ-8000 Automatic Strapping MachineReid Brothers UK
The RQ-8000 automatic strapping machine can apply up to 64 straps per minute. It is robust, portable, and ready for operation in less than 25 seconds. Key features include a dedicated tension motor for improved speed, an easy-to-use foot bar for two-handed operation, an adjustable table height, a cycle counter to track usage, and self-correcting technology. The machine also has easy strap loading, automatic re-feeding if needed, and low maintenance needs due to a self-lubricating design.
The document describes various tensile testing instruments manufactured by Shanta Engineering, including hand operated, twin column universal, single column universal, and electronic tensile testing machines. The machines can test materials like rubber, plastics, cables, leather, paper, and metals under tension, compression, bending or flexural loads. Key features include digital load and displacement readouts, adjustable speeds, optional load cells and accessories for specific tests. Specifications include load capacities, resolutions, speeds, dimensions and power requirements.
This document provides specifications for Tecnotion BV's UF Series Ironless linear motors. It describes the performance, electrical, thermal, and mechanical characteristics of the UF3 and UF6 models. The UF6 has larger dimensions and can produce higher forces and currents than the UF3. Both models are 3-phase synchronous ironless motors intended for precision linear motion. Dimensional drawings of the magnet yokes and coil units are also included.
Tranco model sd 1036 core winding machineRobby Wills
The SD 1036 is the original model of TRANCO core-winding machines. Its small footprint and flexible options make it an ideal solution for most core-winding applications.
The document provides specifications for the RCP2CR-SS7C cleanroom ROBO cylinder. It has a pulse motor, slider coupling type, and is 60mm wide. The maximum load capacity decreases at higher speeds due to the pulse motor characteristics. Load capacity also decreases with increasing lead size. The document provides tables and graphs of speed versus load capacity, stroke length and maximum speed specifications, as well as dimensions and other technical details.
TRUMPF Launch the new TKF 1500 - 2 speed machine capable of single step bevelling in S275 and S355 mild steel and stainless steel. Please see specification table for further information or get in touch with your requirements.
This document provides information about the Acculine Series high performance single axis linear stages, specifically the SLP15 and SLP25 models. It describes the simple structure and design of the shaft-type linear motor that provides large drive force with high efficiency. Charts and specifications are given for thrust, speed, load capacity, accuracy and other performance characteristics for each model. Installation details like cable specifications and mounting dimensions are also included.
Tolomatic belt drive actuator comparsion brochureElectromate
This document compares Tolomatic belt drive actuators, including the MXB, B3W, and TKB models. It provides graphs comparing the actuators' performance characteristics such as thrust, stroke length, load capacity, speed, weight, and inertia. The MXB has some unique features, such as its carrier mounting surface being located 90 degrees from the belt motion. While the MXB and B3W are similar in some respects, each also has capabilities suited to different applications.
With integrated laser power control and beam guidance via two mirrors, the KAAST Speedmaster laser cutting machine has a stable cutting operation over the entire operating range. Featuring a high traveling speed, 150 m/min (5900”/min), a high-performance Siemens 840D CNC control, and a non-contact Precitec HP 1.5” head, the workspace is easily accessible to ease the maintenance process. The beam guideways are sealed for complete protection from scattered radiation. The Speedmaster also includes a progressive lens cooling system, hydraulic pallet clamping fixtures, and high machining precision/traversing for the cutting of any 2-D contours. There are also options for a pallet-shuttle system and a RTX – pipe cutting device that can be placed lateral to the worktable. This allows for cutting tubes and profiles from 20 to 250 mm (0.75 to 10”)
https://kaast-usa.com/product/speedmaster/
This document provides instructions on how to create an Aptana Ruble, which extends the IDE's functionality using Ruby. It covers generating a new ruble, adding menu items and commands, defining command scopes, inputs, outputs, and key bindings. Code assist is enabled through ScriptDoc XML. A simple demo ruble is presented, and packaging/installation instructions conclude the document.
This document provides an overview of the internet and its key components. It discusses the history of the internet, advantages and disadvantages, and essential things needed to access it like computers, internet service providers, and web browsers. It also describes important internet elements like search engines, web pages, websites, social networking sites, and e-commerce platforms. Popular examples are given for each type.
This document describes an S-1200-SV high end LED lamp SMT production line. The line includes a semi-automatic screen printer, two buffer conveyors, a pick and place machine, a reflow oven, and a work table. The total length of the line is 11.2 meters. It requires one worker to operate and has a total installed power requirement of approximately 10 kW. Each machine in the line is also described in detail with specifications.
Discussion on Support Long Range Cell Operation for GCSE (S1-141011)Yi-Hsueh Tsai
In the current GCSE architecture in TR 23.768, it requires to routine all group-cast media transports to the GCSE server in EPC and registers all GCSE members to the GCSE server. Therefore, RP-140185[3] mentions that the required end-to-end delay for media transport may exceed the requirement of 150 ms, and the required time for joining an ongoing group communication may in worse case exceed the requirement of 300 ms. However, by using long-range cell, those issues can be mitigated by two reasons.
1) Comparing with the current GCSE architecture, long-range cell can shorten the required end-to-end delay by local routed the group-cast media transports to the UEs without go back to the GCSE server in order to meet the maximum latency requirement, 150ms.
In TR 23703, it mentions that we have to handle out of network coverage scenarios for proximity direct communication in rural area. Therefore, long-range cell is proposed to reduce network converge holes, and thus the phenomenon can be significantly mitigated especially in the rural area.
Although, for receivers located in the fringe areas outside the coverage contour can only receive outbound communication, those UEs can still obtain synchronization signal, system information block, and semi-persistent resource management information for establishing direct communication.
1) The document discusses establishing effective operational reliability testing (ORT) to detect failures before customers do so in a cost effective and timely manner.
2) It notes that the best testing is that which does not need to occur by finding variations and failures early in the supply chain.
3) An example is provided showing that testing 50 samples over 12 days can detect a 4.5% failure rate, while testing over 24 days could detect a lower 1.2% failure rate. Done correctly, ORT can balance constraints, budgets, and protection.
The Macron 6 linear actuator can be customized with lengths up to 76.2 meters. It features repeatability of +/- 0.001 inches and accuracy of +/- 0.005 inches per 36 inches. It has a maximum speed of 400 inches per second and can provide acceleration exceeding 9 G's. The actuator uses a belt drive system and NEMA sized motors can be mounted in standard or custom configurations.
The document introduces several mechatronics cylinder models from Dyadic Systems for linear actuation. Key points:
- The cylinders range in price from $295 to $455 and can provide thrusts from 10kgF to 50kgF, with strokes from 50mm to 1,000mm.
- Features include programmable positioning, speed, acceleration, I/O signals and more.
- Dyadic claims its integrated motor, encoder and drive results in high accuracy, long life and low cost compared to other actuators.
- The document provides specifications for each cylinder model as well as an overview of available accessories and technical support contacts.
SMAC LCR16 Series Linear Rotary ActuatorElectromate
The LCR16 Series is a linear rotary actuator from MovingCoilActuators with a direct drive brushless servo motor. It has dimensions of 60 x 170 x 16 mm, a linear stroke of 15 mm, and peak force of 8 N at 1.5 amps of current. The actuator provides both linear and rotary motion in a single unit and is fully programmable for force, position, and velocity control.
The document contains specifications for the S20 surface mount technology machine. It lists the machine's board size capabilities, thickness range, transfer speed, placement speed and accuracy, component height limits, applicable component types and packages, inspection capabilities, user interface languages, board positioning features, component storage capabilities, dimensions, and weight. Key specs include a maximum board size of 1830x510mm, placement speed of 45,000 components per hour, placement accuracy of 40 microns, and support for components up to 30mm in height.
The MS400 Linear Actuator provides accurate positioning with thrust up to 400 lbs. and speeds up to 30 in/sec. It can replace pneumatic or hydraulic actuators requiring multiple positions. It integrates easily with machine controls via a DC brush or AC brushless servomotor. The stainless steel translation tube and wiper seal provide trouble-free operation for years. Various mounting options eliminate the need for custom brackets.
This document provides information on ServoBelt Linear drives manufactured by Bell-Everman, including:
- An overview of the ServoBelt Linear drive system, noting its high performance, low cost, limitless scalability, and ability to support multiple carriages and axes.
- Details on the part numbering system used to configure ServoBelt Linear drives.
- Specifications for the Light, Medium, and Heavy Duty models, including payload capacity, accuracy, speed, force and moment ratings, encoder options, and more.
We design and manufacture automatic machine for the PCBA/SMT and Thru-hole industries in Shenzhen China. We help companies looking to low cost equipment with smart, ROI-driven assembly equipment solutions. To watch the machine working video, please search: "Odd form insertion machine" in Youtube. Contact us today to learn how we can help you。 info@smthelp.com
Gordian Strapping StraPack RQ-8000 Automatic Strapping MachineReid Brothers UK
The RQ-8000 automatic strapping machine can apply up to 64 straps per minute. It is robust, portable, and ready for operation in less than 25 seconds. Key features include a dedicated tension motor for improved speed, an easy-to-use foot bar for two-handed operation, an adjustable table height, a cycle counter to track usage, and self-correcting technology. The machine also has easy strap loading, automatic re-feeding if needed, and low maintenance needs due to a self-lubricating design.
The document describes various tensile testing instruments manufactured by Shanta Engineering, including hand operated, twin column universal, single column universal, and electronic tensile testing machines. The machines can test materials like rubber, plastics, cables, leather, paper, and metals under tension, compression, bending or flexural loads. Key features include digital load and displacement readouts, adjustable speeds, optional load cells and accessories for specific tests. Specifications include load capacities, resolutions, speeds, dimensions and power requirements.
This document provides specifications for Tecnotion BV's UF Series Ironless linear motors. It describes the performance, electrical, thermal, and mechanical characteristics of the UF3 and UF6 models. The UF6 has larger dimensions and can produce higher forces and currents than the UF3. Both models are 3-phase synchronous ironless motors intended for precision linear motion. Dimensional drawings of the magnet yokes and coil units are also included.
Tranco model sd 1036 core winding machineRobby Wills
The SD 1036 is the original model of TRANCO core-winding machines. Its small footprint and flexible options make it an ideal solution for most core-winding applications.
The document provides specifications for the RCP2CR-SS7C cleanroom ROBO cylinder. It has a pulse motor, slider coupling type, and is 60mm wide. The maximum load capacity decreases at higher speeds due to the pulse motor characteristics. Load capacity also decreases with increasing lead size. The document provides tables and graphs of speed versus load capacity, stroke length and maximum speed specifications, as well as dimensions and other technical details.
TRUMPF Launch the new TKF 1500 - 2 speed machine capable of single step bevelling in S275 and S355 mild steel and stainless steel. Please see specification table for further information or get in touch with your requirements.
This document provides information about the Acculine Series high performance single axis linear stages, specifically the SLP15 and SLP25 models. It describes the simple structure and design of the shaft-type linear motor that provides large drive force with high efficiency. Charts and specifications are given for thrust, speed, load capacity, accuracy and other performance characteristics for each model. Installation details like cable specifications and mounting dimensions are also included.
Tolomatic belt drive actuator comparsion brochureElectromate
This document compares Tolomatic belt drive actuators, including the MXB, B3W, and TKB models. It provides graphs comparing the actuators' performance characteristics such as thrust, stroke length, load capacity, speed, weight, and inertia. The MXB has some unique features, such as its carrier mounting surface being located 90 degrees from the belt motion. While the MXB and B3W are similar in some respects, each also has capabilities suited to different applications.
With integrated laser power control and beam guidance via two mirrors, the KAAST Speedmaster laser cutting machine has a stable cutting operation over the entire operating range. Featuring a high traveling speed, 150 m/min (5900”/min), a high-performance Siemens 840D CNC control, and a non-contact Precitec HP 1.5” head, the workspace is easily accessible to ease the maintenance process. The beam guideways are sealed for complete protection from scattered radiation. The Speedmaster also includes a progressive lens cooling system, hydraulic pallet clamping fixtures, and high machining precision/traversing for the cutting of any 2-D contours. There are also options for a pallet-shuttle system and a RTX – pipe cutting device that can be placed lateral to the worktable. This allows for cutting tubes and profiles from 20 to 250 mm (0.75 to 10”)
https://kaast-usa.com/product/speedmaster/
This document provides instructions on how to create an Aptana Ruble, which extends the IDE's functionality using Ruby. It covers generating a new ruble, adding menu items and commands, defining command scopes, inputs, outputs, and key bindings. Code assist is enabled through ScriptDoc XML. A simple demo ruble is presented, and packaging/installation instructions conclude the document.
This document provides an overview of the internet and its key components. It discusses the history of the internet, advantages and disadvantages, and essential things needed to access it like computers, internet service providers, and web browsers. It also describes important internet elements like search engines, web pages, websites, social networking sites, and e-commerce platforms. Popular examples are given for each type.
This document describes an S-1200-SV high end LED lamp SMT production line. The line includes a semi-automatic screen printer, two buffer conveyors, a pick and place machine, a reflow oven, and a work table. The total length of the line is 11.2 meters. It requires one worker to operate and has a total installed power requirement of approximately 10 kW. Each machine in the line is also described in detail with specifications.
Discussion on Support Long Range Cell Operation for GCSE (S1-141011)Yi-Hsueh Tsai
In the current GCSE architecture in TR 23.768, it requires to routine all group-cast media transports to the GCSE server in EPC and registers all GCSE members to the GCSE server. Therefore, RP-140185[3] mentions that the required end-to-end delay for media transport may exceed the requirement of 150 ms, and the required time for joining an ongoing group communication may in worse case exceed the requirement of 300 ms. However, by using long-range cell, those issues can be mitigated by two reasons.
1) Comparing with the current GCSE architecture, long-range cell can shorten the required end-to-end delay by local routed the group-cast media transports to the UEs without go back to the GCSE server in order to meet the maximum latency requirement, 150ms.
In TR 23703, it mentions that we have to handle out of network coverage scenarios for proximity direct communication in rural area. Therefore, long-range cell is proposed to reduce network converge holes, and thus the phenomenon can be significantly mitigated especially in the rural area.
Although, for receivers located in the fringe areas outside the coverage contour can only receive outbound communication, those UEs can still obtain synchronization signal, system information block, and semi-persistent resource management information for establishing direct communication.
1) The document discusses establishing effective operational reliability testing (ORT) to detect failures before customers do so in a cost effective and timely manner.
2) It notes that the best testing is that which does not need to occur by finding variations and failures early in the supply chain.
3) An example is provided showing that testing 50 samples over 12 days can detect a 4.5% failure rate, while testing over 24 days could detect a lower 1.2% failure rate. Done correctly, ORT can balance constraints, budgets, and protection.
A 40-year-old man presented with a 1.5x1 cm swelling on his right forearm that had been present for 1 month. On examination, the swelling was soft to firm and mobile. Histopathological examination of the swelling showed features consistent with a lipoma.
Teleradiology Benefits :
Improved Communication
Immediate accessibility to ER doctor/specialist
Support for Technologist – protocols, rescans
Radiologist Productivity, Efficiency, Lifestyle
Cost benefit – economy of scale
This document provides guidelines and recommendations for the surgical management of aortic aneurysms and dissections. Some key points:
- Ascending aortic aneurysms or dissections require urgent surgical repair. Descending aortic involvement can often be managed medically unless complications occur.
- Medical management of acute dissections involves beta blockers and blood pressure control. Surgical repair is recommended for ascending aorta involvement or complications in the descending aorta.
- Genetic conditions like Marfan syndrome require close imaging monitoring and often early elective surgery due to higher risk of complications. Surgery is typically recommended for aneurysms over 5.0-5.5cm depending on the condition.
- Endovascular
In this presentation we will discuss role of high resolution in characterizing normal variant and pathologies of spinal pathologies.
This is a pictoral review.
This document discusses hypertension and its treatment with antihypertensive drugs. It defines hypertension and its classification. It then describes various classes of antihypertensive drugs including diuretics, ACE inhibitors, angiotensin receptor blockers, sympatholytics, beta blockers, calcium channel blockers, vasodilators and their mechanisms of action, side effects and uses. It concludes with nursing implications of administering antihypertensive drugs like monitoring for hypotension and palpitations.
This document summarizes a study evaluating the association between activated clotting time (ACT) levels and time to hemostasis and radial artery patency following radial artery catheterization. The study found that higher ACT levels were weakly correlated with longer times to hemostasis, with a difference of only 10 minutes between low and high ACT groups. ACT levels were not significantly associated with radial artery patency. The conclusions were that ACT levels do not have a clinically significant impact on outcomes and that there is no need to consider protamine sulfate treatment following radial procedures.
This document describes the use of a 6 French brachial intra-aortic balloon pump (IABP) to provide cardiac support during complex percutaneous coronary interventions (PCI) done via the transradial approach. The author presents data on 15 patients who underwent elective PCI with prophylactic 6F brachial IABP support and had no access site complications, shorter bed rest time, and shorter hospital stay compared to patients who received 8F femoral IABP support. While the 6F brachial IABP allows for cardiac support during complex transradial PCI, its small balloon volume, lack of pressure monitoring, and short catheter length limit its use to certain patients and clinical situations.
This document summarizes Masahisa Yamane's presentation on the Japanese strategy for successful CTO PCI. It discusses techniques such as whip-jumping using rotational power retention, avoiding subintimal dissection through careful wire manipulation, and using IVUS to guide re-entry. It also provides data showing an increase in successful crossing from 2012 to 2013, with strategies transitioning from single wire to parallel wiring and IVUS guidance. The presentation emphasizes creating a safe and stable platform using single or dual wire strategies, while avoiding guide wire injuries through intentional deflection control and using IVUS to monitor vessel anatomy in real-time.
CI-AKI, or contrast-induced acute kidney injury, is defined as a 25% or 0.5 mg/dl increase in creatinine within 48-120 hours of intravenous contrast exposure. It is the third leading cause of hospital-acquired acute kidney injury. Risk factors include higher contrast volumes, pre-existing kidney dysfunction, and diabetes. Prevention strategies include intravenous hydration with isotonic saline before and after the procedure, minimizing contrast volume, and potentially forced diuresis or coronary sinus aspiration of contrast. The risk of CI-AKI in CTO procedures is relatively low if contrast volume is kept under 400 ml without other risk factors like CKD or diabetes. Most cases of CI-AKI are
Lester Franks is a leading provider of spatial information consulting services in Australia, operating for 50 years. It offers a wide range of surveying, engineering, and planning services using innovative technologies like 3D laser scanning. It has 10 locations across Australia and works internationally. The document discusses its specialized services including cadastral surveying, engineering surveys, 3D laser scanning, aerial mapping, building information modeling, and industrial metrology.
How to manufacturing of LED Bulb/Tube Lights
Do you face the following questions:
1. Still don't know how to build one new LED Bulb/Tube Lights factory?
2. Recruitment difficulties season?
3. Low production efficiency?
4. The Labor cost is still rising?
How to manufacturing of LED Bulb/Tube Lights
Do you face the following questions:
1. Still don't know how to build one new LED Bulb/Tube Lights factory?
2. Recruitment difficulties season?
3. Low production efficiency?
4. The Labor cost is still rising?
Linha completa de equipamentos #PCB #THT #SMTLucas Oliveira
The document describes an automatic SMT placement machine that can place up to 30,000 components per hour with high accuracy. It has 8 placement heads with vision systems and places various SMD components from 0603 to 74xx sizes. The machine has dimensions of 2000mm x 1150mm x 1400mm and can handle PCBs up to 1200mm in length.
Focus on SMT machine manufacturing&offering comprehensive solution in bulk LED assemble.Provide high quality replacement parts.Machine installation,repair,maintenance,Pre-sales and after sales service.
Highly cost-effective LED SMT Line S-1200-LV
1. High-accuracy
2. High-speed: Maximum placing speed reaching 0.13s/chip (28000CPH).
3. Placing LED components ranging from 0603 to 7474, including both standard and irregularly
shaped LED.
4. Suitable for all LED lighting products. Able to assemble LED PCBs up to 4 Ft long in a single pass. 5. Excellent quality hardware from international famous brands to ensure placement repeatability
and precision.
6. Very convenient to be installed. Only 2 workers and tatal 10KW power required for installation.
This document provides information on several SMT machines including terminal inserters, wave solder machines, screen printers, pick and place machines, and a full LED lamp SMT line. The terminal inserter can insert leads up to 300mm wide at speeds of up to 1500mm/min. The wave solder machines come in various sizes to accommodate different PCB sizes and have adjustable conveyor heights. The screen printers have automatic stencil clamping and positioning and can print on PCBs up to 400x340mm in size. The pick and place machines can place up to 36 components per second and are suitable for higher volume production. An entire low-cost LED lamp SMT line is also presented that could produce 40,
This document provides information on various SMT equipment from a supplier including pick and place machines, conveyors, screen printers, reflow ovens, and complete SMT line solutions. Specifically, it summarizes 5 pick and place machines ranging from the S-320 to the high-speed S-1200SV. It also describes automatic loaders and unloaders, conveyors, a semi-automatic and fully automatic screen printer, a lead-free reflow oven, and examples of complete SMT lines incorporating different combinations of this equipment.
The document discusses AC servo motors. It covers the principle, characteristics, types, applications and sizing of AC servo motors. Some key points include:
- AC servo motors use permanent magnets and feedback from encoders to provide high torque and precision control.
- Characteristics like speed, torque, frame size, and encoder options can be selected for the application.
- Standard and special motors are used in applications like machine tools, semiconductor equipment, medical devices and more.
- Success stories demonstrate how AC servo motors replaced hydraulic systems and improved textile machines, simulators and other special purpose machines.
- Motor sizing software is available to help customers select the optimized motor for their application.
The document discusses AC servo motors. It covers the principle, characteristics, types, and applications of AC servo motors. Some key points include:
- The principle describes the motor design including the stator, rotor, and encoder. AC servo motors use permanent magnets and feedback control for high torque and precision.
- Characteristics include speed and torque ranges, order information with various frame sizes and capacities. Special types include hollow shaft, spinner, and customized motors.
- Applications mention positioning, speed control, synchronous operation, and high torque/power needs in machine tools, industrial robots, semiconductor equipment, and other machinery. Example applications shown include feeders, indexers, and material handling.
The SMT Buffer Conveyor is used to connect automated assembly machines in a production line. It supports one or more operator positions and can be configured for single or dual side use. It features an adjustable rail structure, durable anti-static belt, and aluminum alloy rails to reliably transport PCBs or components between 0-2 meters per minute. The SMT Buffer Conveyor Model S-350C has additional specifications for conveying PCBs from 50-350mm in width at speeds from 0-10,000mm per minute.
- Focus on AI SMT Machine & PCB auto Assembly.
- Offering comprehensive solution in Through Hole Technology for Radial component inserter, Axial component inserter, Bulk LED, Odd form component inserter & Eyelet/Pin Inserter.
- Provide High Quality Replacement Parts for SMT Pick & Place Equipment and Auto Insertion Machine: Vacuum Nozzles, Cutter Blades, Glue Dispense Nozzles, Feeder Accessories, Vacuum Pumps and Accessories, Filters, Springs, Lamps, Belts, and more!
- Provide full training for AI SMT processing, machine installation,repair,maintenance,upgrade.
- Provide pre-sales and after sales service.
(contact me :ming@smthelp.com
http://www.smthelp.com/)
This document provides specifications for several pieces of electronic assembly equipment, including:
- A WSM 180 wave soldering machine with a 7" wave width and conveyor speed of up to 6 ft/min for automatic soldering.
- An RF300 reflow soldering oven with 3 heating zones, 850mm heated length, and maximum temperature of 300C for SMT component assembly.
- A YV100X pick and place machine with accuracy of ±0.1mm for chip components, maximum mounting speed of 1.7sec/QFP, and capacity for 8-56mm tapes and trays.
- An S1200 semi-automatic printer with a printing speed up
The document compares different types of linear motors and describes the characteristics of linear shaft motors. It discusses how linear shaft motors have a coreless design with no iron in the stator or mover, which avoids cogging and allows for a stiff design. Linear shaft motors also have a large air gap between the stator and mover, which makes force generation non-critical and insensitive to air gap variations over the motor stroke.
This document provides specifications for the RCP2-HS8R ROBO Cylinder. It includes details on:
- Speed and load capacity which decreases at higher speeds
- Supported stroke lengths from 50-1000mm
- Compatible PCON-CF-86PI-NP-2-0 controller for up to 512 positioning points
- Dimensions and weights that vary by stroke length
The document provides information on the Direct Drive Motor DD sold and serviced by Electromate. It describes the motor as having high torque and speed capabilities without using speed reducing mechanisms. This allows for compact size, high payload capacity, and excellent response time. It provides details on the motor specifications, controller options, cable requirements, and application examples. Installation and operation notes are also included to help customers select the appropriate motor for their needs.
Southern machinery board handling system catalog 2018 01Ming Gan
- Focus on AI SMT Machine & PCB auto Assembly.
- Offering comprehensive solution in Through Hole Technology for Radial component inserter, Axial component inserter, Bulk LED, Odd form component inserter & Eyelet/Pin Inserter.
- Provide High Quality Replacement Parts for SMT Pick & Place Equipment and Auto Insertion Machine: Vacuum Nozzles, Cutter Blades, Glue Dispense Nozzles, Feeder Accessories, Vacuum Pumps and Accessories, Filters, Springs, Lamps, Belts, and more!
- Provide full training for AI SMT processing, machine installation,repair,maintenance,upgrade.
- Provide pre-sales and after sales service.
(contact me :ming@smthelp.com
http://www.smthelp.com/)
1. The document introduces several SMT handling machines provided by ETA, including conveyors, magazine loaders/unloaders, stackers, and folding loaders.
2. It provides specifications for each machine model, such as dimensions, weight, speeds, and material details.
3. The machines have modular designs, adjustable speeds, and are compatible with SMEMA interfaces.
1.Modular design, optional assembly as per client’s requirement.
2.Rugged steel design, improves equipment stability .
3.Smooth stainless steel screw to adjust the width of the rail.
4.Variable speed control.
5.Circuit board testing mode.
6.Using a dedicated aluminum slot for transfer orbit to prevent PCB stuck.
7.Heavier bottom design, not easily shift.
8.Machine length can be customized.
9.Compatible with SMEMA interface.
*: Option: Dual rail
1.Strong,firm and stable design.
2.'soft touch' LED control panel or touch screen can be selected.
3.Top&bottom pneumatic clamps to secure magazine rack.
4.No PCB breakage guaranty because of special gas circuit design.
5.Automatical diagnosing fault code display function.
6.Wear-resistant cable and have long service life.
7.Compatible SMEMA interface.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
1. S-1200-SV High end LED Lamp SMT Line
• Semi-Auto Screen Printer
• Buffer Conveyor
• Pick and Place
• Buffer Conveyor
• Reflow Oven
• Work table
Semi-Auto Screen Printer → Buffer Conveyor → Pick and Place → Buffer Conveyor → Reflow Oven → Worktable
1200mm 1500mm 2000mm 1500mm 3000mm 2000mm
Whole Line length: 1.2M → 1.5M → 2.0M → 1.5M → 3M → 2M= 11.2M (Total Length)
www.smthelp.com
2. S-1200-SV High end LED Lamp SMT Line
Semi-Auto Screen Printer → Buffer Conveyor → Pick and Place → Buffer Conveyor → Reflow Oven → Worktable
www.smthelp.com
*Total Man Power Required : 1 Worker
*Total Installed Power Required: Approx. 10 KW
3. 1. Semi-Auto Screen Printer SP-1200
○Adopts SMC rail and Panasonic speed control motor drive steel squeegee
base to ensure printing steady
○The squeegee base can be uplifted 45°, easy to disassemble the squeegee
and clean the screen
○The printing base can be move front and rear and fixed to ensure perfect
printing effect
○The printing table has groove and location pin, suited for single and double-
sided board production
○Adopts X.Y.Z axes to align the board by using arm (screen stencil) and
printing table
○Microcomputer control, equipped with LCD, user friendly interference and
with counting function.
SPECIFICATIONS
PCB Size 350 X 1200mm
Printing Area 320 X 1270mm
PCB Fixed System PCB Outer Or Pin Positioning
Frame Size 370X1320mm
Adjusting for table Front
Printing Accuracy ±0.05mm
Repeating Accuracy ±0.02mm
PCB Thickness 0.2-2.0mm
Air Source 4-6kg
Power Supply Single Phase 220V, 50/60Hz 100W
Dimension 1200*900*1650mm (L*W*H)
Net Weight 250KG www.smthelp.com
4. 2. SMT Buffer Conveyor S-350C*2 unit
• PCB Conveyor rail length: 1500mm
• Rail Fix mode: Front Fix (Option: Rear fix)
• PCB Conveyor direction: L→R (Or R→L)
• Control System: Relay Board (2 sensor without
stopper)
• PCB Conveyor Height: 900±20 mm
• PCB Conveyor Width: 20-400mm
• PCB Conveyor Speed: 0-2M/min
• Available to communications with other devices by
SMEMA signal plug
• Exact thread shaft structure to ensure the adjustment
of rail Width parallel
• Used durable Anti-static belt with strengthen
Aluminum Alloy rail to be reliable
• Power Consumption: Approx. 40W
• Power Supply: Single Phase 220V,50HZ
• Weight:Approx. 70kg
www.smthelp.com
5. 3. Pick And Place S-1200-SV
www.smthelp.com
Dimension :2000(L)×1150(W)×1400(H)mm
PCB length : Max. 1200 mm
PCB width :Max.325mm
Accuracy : 0.1mm
Movement accuracy : 0.02mm
Speed : 35000 CPH
Power supply: AC220V , 50HZ
Power consumption : 2.0KW
Air pressure:0.55MPA
Positing:Visual identification mark
Weight :Approx.1250KG
6. 4. Lead-Free Reflow Oven S-6600
• FEATURES
• ○ Complete for the lead free process
• ○ Adopt instrument control System and closed loop
control for heating source of each zone.
• ○ Temperature control adopt circulation hot air heating
mode for each zone;
• ○ Closed loop control for conveyor system, can go along
steadily stepless rate-adjusting;
• ○ With over heating alarm function;
www.smthelp.com
Dimension (L*W*H)mm :3600x720x1250
Standard Color: Computer Grey
Weight: Approx.420KG
Number Of Heating Zones:Up6/Bottom6
Length Of Heating Zones:2300mm
Number of Cooling Zones:1
Length of Cooling Zones: 1
Exhaust Volume 10M3/minx2:Exhausts
Control System: Instruments
Computer: No(Optional)
Siemens PLC:Standard
Electric Supply Required: 3phase,380V 50/60Hz
Power For Warm Up :15KW
Power Consumption: 5KW
Warming Time: Approx.20 minute
Temp. Setting Range: Room Temp.-- 300℃
Cooling Method: Air fan
8. Welcome inquiry
1,Please visit : www.smthelp.com
2, Find us more: https://www.facebook.com/autoinsertion
3, Know more our team: https://cn.linkedin.com/in/smtsupplier
4, Welcome to our factory in Shenzhen China
5, Google:Auto+Insertion
6, Looking forward to your email: Jessica@smthelp.com