Government of India had come out with the new mandate guideline under JNNSM that each of the PV modules used under this mission should be attached with the RFID tags to keep its accountability,authenticity & performance measurement.RFID allows better monitoring of the PV manufacturing processes with expedient raw material flow and more effective planning and control.
Automotive PCB market is the biggest highlight. Global automotive PCB market size was USD5.28 billion in 2015 and is expected to grow by 8.3% to USD5.72 billion in 2016 and by 8.2% to USD6.19 billion in 2017, primarily because of impetus of millimeter-wave radar to RF board, of connected vehicle to multi-layer board, and of chassis electronization to metal substrate.
With a growing selection of antenna choices and sensor ICs, SMARTRAC’s sensor tag and inlay family offers state-of-the-art products with great flexibility to accurately measure moisture and temperature conditions in industrial, healthcare and many other applications.
Sensor inlays and tags are passive UHF inlays equipped with RFMicron’s Magnus® IC family. These RFID sensor inlays offer great performance, and are a perfect choice where moisture and temperature detection is an important requirement. Their specific antenna design acts as a resistor/inductor/capacitor (RLC) tuned circuit to enable an antenna to sense its environment. The antenna converts environmental data into an impedance change, and the sensor tag IC translates this into a sensor code, as it dynamically matches antenna impedance to die impedance.
These single-chip sensor inlay and tag solutions are cost-efficient and easy to implement, and work on different surface materials ranging from textiles to metal parts to construction materials. They can be deployed where active or semi-active sensors are not practical, and involve no battery maintenance, costs or problems with product lifetime or recycling. Delivery formats are dry and wet to suit all converting-industry needs.
Introduction to Government funded equipment (GFE)Udit Jain
The project describes about the organization history, its areas of working and then focuses on one product, which is GFE. It talks in detail about the parts of GFE, working and the components which are attached to it for its proper working.
This paper represents the RFID and GSM technology. The main objective of the system is to uniquely identify and to make security for a person. This requires a unique product,which has the capability of distinguishing different person. This is possible by the new emerging technology RFID (Radio Frequency Identification). The main parts of an RFID system ar e RFID tag (with unique ID number) and RFID reader (for reading the RFID tag). In this system,RFID ta g and RFID reader used are operating at 125 KHz. The microcontroller internal memory is used for storing the details.
Automotive PCB market is the biggest highlight. Global automotive PCB market size was USD5.28 billion in 2015 and is expected to grow by 8.3% to USD5.72 billion in 2016 and by 8.2% to USD6.19 billion in 2017, primarily because of impetus of millimeter-wave radar to RF board, of connected vehicle to multi-layer board, and of chassis electronization to metal substrate.
With a growing selection of antenna choices and sensor ICs, SMARTRAC’s sensor tag and inlay family offers state-of-the-art products with great flexibility to accurately measure moisture and temperature conditions in industrial, healthcare and many other applications.
Sensor inlays and tags are passive UHF inlays equipped with RFMicron’s Magnus® IC family. These RFID sensor inlays offer great performance, and are a perfect choice where moisture and temperature detection is an important requirement. Their specific antenna design acts as a resistor/inductor/capacitor (RLC) tuned circuit to enable an antenna to sense its environment. The antenna converts environmental data into an impedance change, and the sensor tag IC translates this into a sensor code, as it dynamically matches antenna impedance to die impedance.
These single-chip sensor inlay and tag solutions are cost-efficient and easy to implement, and work on different surface materials ranging from textiles to metal parts to construction materials. They can be deployed where active or semi-active sensors are not practical, and involve no battery maintenance, costs or problems with product lifetime or recycling. Delivery formats are dry and wet to suit all converting-industry needs.
Introduction to Government funded equipment (GFE)Udit Jain
The project describes about the organization history, its areas of working and then focuses on one product, which is GFE. It talks in detail about the parts of GFE, working and the components which are attached to it for its proper working.
This paper represents the RFID and GSM technology. The main objective of the system is to uniquely identify and to make security for a person. This requires a unique product,which has the capability of distinguishing different person. This is possible by the new emerging technology RFID (Radio Frequency Identification). The main parts of an RFID system ar e RFID tag (with unique ID number) and RFID reader (for reading the RFID tag). In this system,RFID ta g and RFID reader used are operating at 125 KHz. The microcontroller internal memory is used for storing the details.
Advances In Digital Automation Within RefiningJim Cahill
Emerson's Tim Olsen presents to Argentinean refiners on the changes in automation technologies and how they are being applied to improve efficiency and reduce costs.
http://www.scribd.com/doc/14688569/Radio-Frequency-Identification
The goal of supply chain management is to increase organizational effectiveness through the coordination of activities among suppliers, manufacturers, distribution centers, and customers. Technology evolution in the latest years has significantly contributed towards this direction. The implementation of systems such as ERP, SAP, RFID, etc., makes the production and distribution of the products more accurate and efficient. Through technology implementation, the parties of the supply chain manage to accomplish the production and distribution of the right product, at the right time, to the right location, at the minimum cost while sustaining a certain level of quality (Ramsay, n.d.).
This paper will explain what exactly the RFID system is and how it works. Moreover, the steps a company should follow in order to effectively implement RFID technology will be discussed. The advantages and the disadvantages of this technology will also be presented. Finally, three real life case studies regarding RFID implementation will be analyzed.
RFID Shopping system uses RFID tags to identify products while providing automated shopping experience. The shopping system also provides integrated data mining techniques to facilitate management with real time data with product sales and inventory tracking. The system consists of smart cart system which is attached to the customer cart. The smart cart system also includes intercom module, which facilitates the customer to talk directly to customer service without having to search for one. All the data processing is provided by the central server system which handles all the carts in the system.
This paper deals with the manufacturing of a Prototype of Rotary Car Parking System using Sensors. Lack of space availability has always been a problem in urban areas and major cities and to add to it there are cars parked callously on the streets that further limit the space. In order to handle the issue of parking in busy places various types of vehicle parking systems are used worldwide Rotary Automated Car Parking System and many more. This thesis work is aimed to develop a scale down working model of a car parking system which will reduce the excess use of land space. This total prototype is powered by unipolar stepper motor. This model also uses a RFID Tag and Reader. When the car comes on the ramp the switch will be activated and the pallet comes to carry the vehicle. When the switch will be operated by the operator, sprockets starts to rotate and the new space will be adjusted for new vehicle. Planners, developers, architects are finding out solutions to tackle this problem of parking, so took this opportunity to bring this technology of an automated parking system which will reduce a lot of land space for parking purpose. By testing and analyzing the working model definitely get the view to develop the parking lots at difficult and busy commercial places. Aye Aye Nyein | Ohnmar Win "RFID Based Rotary Car Parking System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd27852.pdf Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/27852/rfid-based-rotary-car-parking-system/aye-aye-nyein
Next generation power modules - patent landscape 2021 - sampleKnowmade
The advent of EV/HEV technology has acted as a catalyst for innovation, leading to an acceleration in applications for power module related patents since 2010. Who are the main IP players? How do they address the new challenges? Who are the new players and IP challengers taking the big opportunities arising from the emerging EV/HEV market?
Catalog Q-Light, Catalog,
Catalog Thiết Bị Điện Q-Light, Catalog Thiết Bị Điện,
Catalog Biến Tần Q-Light, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Q-Light tại https://dienhathe.com
Xem thêm các Catalog khác của Q-Light tại https://dienhathe.info
Để nhận báo giá sản phẩm Q-Light vui lòng gọi: 0907.764.966
Radio frequency identification by rfid project team . faculty of electronic e...Muhammad Ali
Download link : http://www.mediafire.com/download/xs3ws87gahamzxc/Radio_Frequency_Identification_By_RFID_Project_Team_._Faculty_of_Electronic_Engineering_._Communication_department._Menoufia_University_%5BCombined_and_uploaded_by_a_member_of_the_team_%28_Mohammed_Ali_%29%5D.pdf
Radio Frequency Identification By RFID Project Team . Faculty of Electronic Engineering . Communication department
. Menoufia University Combined and uploaded by a member of the team ( Mohammed Ali )
The world’s first single-chip radar (76 - 81 GHz) in a System-on-Chip.
Ahead of its competitors in RFCMOS applications, Texas Instruments (TI) has begun manufacturing highly integrated radar sensor chips - the latest of which is the AWR1642. But rather than integrating all transmitters, receivers, and local oscillators in a single chip, TI went further and integrated a microcontroller unit (MCU) and a digital signal processor (DSP) on the same chip.
More information on that report at http://www.systemplus.fr/reverse-costing-reports/awr1642-77-79-ghz-rfcmos-radar-chipset-from-texas-instruments/
Advances In Digital Automation Within RefiningJim Cahill
Emerson's Tim Olsen presents to Argentinean refiners on the changes in automation technologies and how they are being applied to improve efficiency and reduce costs.
http://www.scribd.com/doc/14688569/Radio-Frequency-Identification
The goal of supply chain management is to increase organizational effectiveness through the coordination of activities among suppliers, manufacturers, distribution centers, and customers. Technology evolution in the latest years has significantly contributed towards this direction. The implementation of systems such as ERP, SAP, RFID, etc., makes the production and distribution of the products more accurate and efficient. Through technology implementation, the parties of the supply chain manage to accomplish the production and distribution of the right product, at the right time, to the right location, at the minimum cost while sustaining a certain level of quality (Ramsay, n.d.).
This paper will explain what exactly the RFID system is and how it works. Moreover, the steps a company should follow in order to effectively implement RFID technology will be discussed. The advantages and the disadvantages of this technology will also be presented. Finally, three real life case studies regarding RFID implementation will be analyzed.
RFID Shopping system uses RFID tags to identify products while providing automated shopping experience. The shopping system also provides integrated data mining techniques to facilitate management with real time data with product sales and inventory tracking. The system consists of smart cart system which is attached to the customer cart. The smart cart system also includes intercom module, which facilitates the customer to talk directly to customer service without having to search for one. All the data processing is provided by the central server system which handles all the carts in the system.
This paper deals with the manufacturing of a Prototype of Rotary Car Parking System using Sensors. Lack of space availability has always been a problem in urban areas and major cities and to add to it there are cars parked callously on the streets that further limit the space. In order to handle the issue of parking in busy places various types of vehicle parking systems are used worldwide Rotary Automated Car Parking System and many more. This thesis work is aimed to develop a scale down working model of a car parking system which will reduce the excess use of land space. This total prototype is powered by unipolar stepper motor. This model also uses a RFID Tag and Reader. When the car comes on the ramp the switch will be activated and the pallet comes to carry the vehicle. When the switch will be operated by the operator, sprockets starts to rotate and the new space will be adjusted for new vehicle. Planners, developers, architects are finding out solutions to tackle this problem of parking, so took this opportunity to bring this technology of an automated parking system which will reduce a lot of land space for parking purpose. By testing and analyzing the working model definitely get the view to develop the parking lots at difficult and busy commercial places. Aye Aye Nyein | Ohnmar Win "RFID Based Rotary Car Parking System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd27852.pdf Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/27852/rfid-based-rotary-car-parking-system/aye-aye-nyein
Next generation power modules - patent landscape 2021 - sampleKnowmade
The advent of EV/HEV technology has acted as a catalyst for innovation, leading to an acceleration in applications for power module related patents since 2010. Who are the main IP players? How do they address the new challenges? Who are the new players and IP challengers taking the big opportunities arising from the emerging EV/HEV market?
Catalog Q-Light, Catalog,
Catalog Thiết Bị Điện Q-Light, Catalog Thiết Bị Điện,
Catalog Biến Tần Q-Light, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Q-Light tại https://dienhathe.com
Xem thêm các Catalog khác của Q-Light tại https://dienhathe.info
Để nhận báo giá sản phẩm Q-Light vui lòng gọi: 0907.764.966
Radio frequency identification by rfid project team . faculty of electronic e...Muhammad Ali
Download link : http://www.mediafire.com/download/xs3ws87gahamzxc/Radio_Frequency_Identification_By_RFID_Project_Team_._Faculty_of_Electronic_Engineering_._Communication_department._Menoufia_University_%5BCombined_and_uploaded_by_a_member_of_the_team_%28_Mohammed_Ali_%29%5D.pdf
Radio Frequency Identification By RFID Project Team . Faculty of Electronic Engineering . Communication department
. Menoufia University Combined and uploaded by a member of the team ( Mohammed Ali )
The world’s first single-chip radar (76 - 81 GHz) in a System-on-Chip.
Ahead of its competitors in RFCMOS applications, Texas Instruments (TI) has begun manufacturing highly integrated radar sensor chips - the latest of which is the AWR1642. But rather than integrating all transmitters, receivers, and local oscillators in a single chip, TI went further and integrated a microcontroller unit (MCU) and a digital signal processor (DSP) on the same chip.
More information on that report at http://www.systemplus.fr/reverse-costing-reports/awr1642-77-79-ghz-rfcmos-radar-chipset-from-texas-instruments/
IIoT Digital Transformation for Plant Equipment MonitoringYokogawa1
Even in the age of Digital Transformation, non-mission critical plant equipment is monitored by daily manual operator rounds or may go unmonitored altogether. This lack of information about equipment status can lead to reactive maintenance and downtime. By adding a wireless sensor network and analytical software designed with non-mission critical equipment in mind, plants can gain visibility to all assets, detect abnormal conditions, predict failures, and prescribe proactive maintenance to keep equipment healthy and running optimally.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Barcode & RFID Convergence: Enabling Greater Visibility Through StandardsVDC Research Group
This webcast was presented by VDC Research on the convergence of Barcode and RFID technologies on the GS1 US Visibility Framework.
Barcode is the dominant track and trace technology on the planet today and its value proposition is being extended by the more automated features of RFID. While these two technologies are often viewed as competitive, they are actually complimentary, and organizations are realizing the best of both worlds when they use GS1 standards as the framework for integrating RFID to improve their business processes.
Members of GS1 US and/or EPCglobal US will see that they not only have the foundation for enhanced visibility solutions, but they can implement them in a more cost effective and timely manner - all while realizing the benefits of building those solutions on a common architecture.
Similar to RFID in PV Solar Manufacturing Industry (20)
RFID technology promises to improve a broad range of processes in logistics and manufacturing. RFID allows better monitoring of the manufacturing processes with expedient material flow and more effective planning and control.
The RFID enabled cylinder management systems would help improve productivity, as well as improve the quality, reliability and efficiency of the cylinder management process, thus making an investment in cylinder management worthwhile.
Unique feature of RFID technology enables Museums and Galleries to automate the process,thereby providing benefits like fast tracked audits,stocks,full visibility of collection,increase in quality & availability of information,elimination of human error etc.
Radio frequency identification (RFID) is a powerful tool for waste collection, disposal, and management, delivering unique and compelling benefits to city governments, waste removal contractors, and their residential and commercial customers.
RFID is an excellent real-time business tool that helps better manage supply chains, covers goods entry, picking, checking, delivery and many other operation flows & increases profit, and decreases the cost by improving visibility into Warehouse management system.
RFID is used to enhance the ability for baggage tracking, dispatching and conveyance so as to improve the management efficiency and the users’ satisfaction.
Radio frequency identification (RFID) technology provides real-time information that can help retailer & distributor plan product delivery schedules more efficiently, or allows customers to see deeper into the supply chain
RFID technology create the first fully effective animal tracking program that meets the growing needs of the industry and far surpasses government goals for animal traceability.
RFID enables full supply chain visibility and as a consequence facilitates collaborative forecasting, planning and replenishment and just in time production.
RFID Technology improves tracking of books & documents, significantly reduces management costs and increases the time that librarian spends with the patrons by enabling automated book handling at checkins, checkouts,book sorting etc.
Large No of files, misplaced files can be easily tracked using RFID technology. With the help of this technology,Inventory management & access to file racks to authorized person can be managed within the organization.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
SAP Sapphire 2024 - ASUG301 building better apps with SAP Fiori.pdfPeter Spielvogel
Building better applications for business users with SAP Fiori.
• What is SAP Fiori and why it matters to you
• How a better user experience drives measurable business benefits
• How to get started with SAP Fiori today
• How SAP Fiori elements accelerates application development
• How SAP Build Code includes SAP Fiori tools and other generative artificial intelligence capabilities
• How SAP Fiori paves the way for using AI in SAP apps
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Generative AI Deep Dive: Advancing from Proof of Concept to ProductionAggregage
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.