Weekly report for KPS-LIM BUNYU for period WK01-October 22 in North Kalimantan, Indonesia. Production was 13,504 BCM against a plan of 15,642 BCM, achieving 86%. Rain and slippery conditions accounted for 9.2 hours of lost time, impacting the week's production. Physical availability was 20% below forecast and rain/slippery was 15% below forecast, contributing to an overall productivity loss of 7% against forecast. Fuel consumption for the week was 1.15 liters per BCM. Average attendance for excavators was 94%, ADT was 97%, dozers was 100%, and graders was 100%.
Review W24 & Plan Week 25 2022 MUM_BAS.pptxnoelmanroe1
The document provides a production review for week 24 at the BAS-Tanjung Enim job site. It summarizes key metrics like planned vs actual overburden removal and coal production. It also includes analyses of rainfall, slippery conditions, production capacity, and waterfall analyses to identify gains and losses. Pareto charts analyze top availability issues. The plan for week 25 outlines the work roster and planned equipment availability.
Kubota U17-3 ALPHA Excavator Parts Catalogue Manual (Publishing ID BKIDA0318)...huanwrj0196
The document lists parts for a cylinder head assembly. It includes the cylinder head component, bolts, plugs, valves, guides, gaskets and springs. Quantities, part numbers, names in Polish and English and other details are provided for each part. Attention is drawn to ensuring the correct crankcase component part number is ordered.
Kubota U17-3 ALPHA Excavator Parts Catalogue Manual (Publishing ID BKIDA0318)...jiu16432
The document lists parts for a cylinder head assembly. It includes the cylinder head component, bolts, plugs, valves, guides, gaskets and springs. Quantities, part numbers, names in Polish and English and other details are provided for each part. Attention is drawn to ensuring the correct crankcase component part number is ordered.
Review W 26 & Plan Week 27 2022_MUM.pptxssuserb71d4d
The document contains a production review and plan for Week 26 and Week 27 at the JOB SITE BAS – TANJUNG ENIM site for PT MANGGALA Engineering Department. It includes production data from all pits, equipment allocation and availability, productivity analysis, and production projections showing expected overburden removal of 143,585 BCM for Week 27. Safety topics and schedules are also included.
The document provides details of three projects being undertaken by S. Mark Engineering including timelines, call out numbers and dates. It also includes the agenda for a weekly review meeting covering project details, safety, progress, documentation, procurement and next week's plan. HSE statistics for the current week are presented. Construction status and progress curves are shown for the IW tank modification and IW/PF pump installation projects. Documentation status lists the number of open, closed and resubmitted documents for each discipline across the projects.
Kubota B2230D Tractor Parts Catalogue Manual (Publishing ID BKIDK0597).pdfaoxs635594
This document provides a parts list for a gear case assembly with part numbers, names, quantities, and other specifications. It includes over 30 individual part listings for components of the gear case like bolts, plugs, gaskets, springs, and the gear case housing itself. The parts are specified for a Kubota engine model and serial number range.
Kubota B2230D Tractor Parts Catalogue Manual (Publishing ID BKIDK0597).pdffujsekdm32w3
This document provides a parts list for a gear case assembly with part numbers, names, quantities, serial numbers, and other specifications. It includes over 30 individual part listings for components of the gear case like bolts, plugs, seals, springs, and the gear case housing itself. The parts are specified for a Kubota engine model 230D gear case with serial numbers less than or greater than certain values.
Kubota B2230D Tractor Parts Catalogue Manual (Publishing ID BKIDK0597).pdfujjskemd9d8di
This document provides a parts list for a gear case assembly with part numbers, names, quantities, and other specifications. It includes over 30 individual part listings for components of the gear case like bolts, plugs, gaskets, springs, and the gear case housing itself. The parts are specified for a Kubota engine model 230D gear case with serial numbers less than or greater than certain values.
Review W24 & Plan Week 25 2022 MUM_BAS.pptxnoelmanroe1
The document provides a production review for week 24 at the BAS-Tanjung Enim job site. It summarizes key metrics like planned vs actual overburden removal and coal production. It also includes analyses of rainfall, slippery conditions, production capacity, and waterfall analyses to identify gains and losses. Pareto charts analyze top availability issues. The plan for week 25 outlines the work roster and planned equipment availability.
Kubota U17-3 ALPHA Excavator Parts Catalogue Manual (Publishing ID BKIDA0318)...huanwrj0196
The document lists parts for a cylinder head assembly. It includes the cylinder head component, bolts, plugs, valves, guides, gaskets and springs. Quantities, part numbers, names in Polish and English and other details are provided for each part. Attention is drawn to ensuring the correct crankcase component part number is ordered.
Kubota U17-3 ALPHA Excavator Parts Catalogue Manual (Publishing ID BKIDA0318)...jiu16432
The document lists parts for a cylinder head assembly. It includes the cylinder head component, bolts, plugs, valves, guides, gaskets and springs. Quantities, part numbers, names in Polish and English and other details are provided for each part. Attention is drawn to ensuring the correct crankcase component part number is ordered.
Review W 26 & Plan Week 27 2022_MUM.pptxssuserb71d4d
The document contains a production review and plan for Week 26 and Week 27 at the JOB SITE BAS – TANJUNG ENIM site for PT MANGGALA Engineering Department. It includes production data from all pits, equipment allocation and availability, productivity analysis, and production projections showing expected overburden removal of 143,585 BCM for Week 27. Safety topics and schedules are also included.
The document provides details of three projects being undertaken by S. Mark Engineering including timelines, call out numbers and dates. It also includes the agenda for a weekly review meeting covering project details, safety, progress, documentation, procurement and next week's plan. HSE statistics for the current week are presented. Construction status and progress curves are shown for the IW tank modification and IW/PF pump installation projects. Documentation status lists the number of open, closed and resubmitted documents for each discipline across the projects.
Kubota B2230D Tractor Parts Catalogue Manual (Publishing ID BKIDK0597).pdfaoxs635594
This document provides a parts list for a gear case assembly with part numbers, names, quantities, and other specifications. It includes over 30 individual part listings for components of the gear case like bolts, plugs, gaskets, springs, and the gear case housing itself. The parts are specified for a Kubota engine model and serial number range.
Kubota B2230D Tractor Parts Catalogue Manual (Publishing ID BKIDK0597).pdffujsekdm32w3
This document provides a parts list for a gear case assembly with part numbers, names, quantities, serial numbers, and other specifications. It includes over 30 individual part listings for components of the gear case like bolts, plugs, seals, springs, and the gear case housing itself. The parts are specified for a Kubota engine model 230D gear case with serial numbers less than or greater than certain values.
Kubota B2230D Tractor Parts Catalogue Manual (Publishing ID BKIDK0597).pdfujjskemd9d8di
This document provides a parts list for a gear case assembly with part numbers, names, quantities, and other specifications. It includes over 30 individual part listings for components of the gear case like bolts, plugs, gaskets, springs, and the gear case housing itself. The parts are specified for a Kubota engine model 230D gear case with serial numbers less than or greater than certain values.
Kubota B2230D Tractor Parts Catalogue Manual (Publishing ID BKIDK0597).pdfshuangminzou
This document provides a parts list for a gear case assembly with part numbers, names, quantities, serial numbers, and other specifications. It includes over 30 individual part listings for components of the gear case like bolts, plugs, seals, springs, and the gear case housing itself. The parts are specified for a Kubota engine model 230D gear case with serial numbers less than or greater than certain values.
Kubota B2230D Tractor Parts Catalogue Manual (Publishing ID BKIDK0597).pdfjiu16432
This document provides a parts list for a gear case assembly with part numbers, names, quantities, and other specifications. It includes over 30 individual part listings for components of the gear case like bolts, plugs, gaskets, springs, and the gear case housing itself. The parts are specified for a Kubota engine model 230D gear case with serial numbers less than or greater than certain values.
Kubota BX261DR Tractor Parts Catalogue Manual (Publishing ID BKIDK5264).pdfkdmra8udokmm
This document provides a list of parts for an engine oil filter. It includes 20 parts related to the oil filter, such as the filter cartridge, filter cover, sealing gaskets, bolts and o-rings. Each part is given a number, part name in Polish and English, quantity needed and weight. This appears to be a routine parts list for reference when replacing or servicing the engine oil filter.
Kubota BX261DR Tractor Parts Catalogue Manual (Publishing ID BKIDK5264).pdfjdkskmdmmd
This document provides a list of parts for an engine oil filter. It includes 20 parts related to the oil filter, such as the filter cartridge, filter cover, sealing rings, and mounting bolts. Each part is given a number, part name in two languages, quantity used, and weight. This appears to be a standard parts list from the manufacturer to identify the specific components that make up the engine oil filtering system.
The document provides a performance review summary for STPP for FY 2022-2023. Some key highlights include:
- STPP was awarded best performing thermal power station in the state sector.
- STPP ranked 1st in PLF among state power sector and 7th overall in India for FY 2022-23.
- Monthly plant load factor exceeded 90% for 6 consecutive months.
- Unit 1 achieved 100.03% PLF and 100% availability for the year.
- Civil works are ongoing for flue gas desulphurization system components.
Kubota BX261DC Tractor Parts Catalogue Manual (Publishing ID BKIDK5268).pdffujsekkdmdm3e1
This document provides parts information for an oil filter assembly:
- It lists 10 parts that make up the oil filter assembly including the oil filter cartridge, housing, and O-ring.
- The part numbers, names in Polish and English, quantities, and weights are provided for each part.
- It notes that the oil filter cartridge should be replaced when ordering a new assembly.
Kubota BX261DC Tractor Parts Catalogue Manual (Publishing ID BKIDK5268).pdf8fuujekdmmd3e
The document provides parts information for an engine, including:
- 190 parts listed with part numbers, names in Polish and English, quantities, serial numbers, weights, and remarks.
- The parts are grouped into sections for the crankcase, oil pan, cylinder head, gear case, and head cover.
- Gaskets, bolts, plugs, filters, hoses, and other common engine parts are included.
Kubota BX261DC Tractor Parts Catalogue Manual (Publishing ID BKIDK5268).pdfbxj85155043
This document provides parts information for an oil filter assembly:
- It lists 10 parts that make up the oil filter assembly including the oil filter cartridge, housing, and O-ring.
- The part numbers, names in Polish and English, quantities, and weights are provided for each part.
- It notes that the oil filter cartridge should be replaced when ordering a new assembly.
Kubota BX261DC Tractor Parts Catalogue Manual (Publishing ID BKIDK5268).pdfjdkskmdmmd
This document provides parts information for an oil filter assembly. It lists 20 parts that make up the assembly, including the oil filter cartridge, housing, gasket, bolts, and O-ring. The parts are identified by number, with the corresponding part number, name in Polish and English, quantity, and weight listed for each. Additional information provided includes serial numbers, remarks, and notes to order new parts.
Kubota BX261DC Tractor Parts Catalogue Manual (Publishing ID BKIDK5268).pdfkdmra8udokmm
This document provides parts information for an oil filter assembly. It lists 20 parts that make up the assembly, including the oil filter cartridge, housing, gasket, bolts, and O-ring. The parts are identified by number, with the corresponding part number, name in Polish and English, quantity, and weight listed for each. Additional information provided includes serial numbers, remarks, and notes to order new parts.
Kubota B2530DC Tractor Parts Catalogue Manual (Publishing ID BKIDK0606).pdfkdmra8udokmm
This document provides a parts list for a gear case assembly with part numbers, names, quantities, serial numbers, and other specifications. It includes over 220 numbered parts for the gear case ranging from bolts and plugs to seals and an oil pump rotor assembly. The parts are grouped by reference number and some have remarks about new parts if the serial number is above or below a certain threshold.
Kubota B2530DC Tractor Parts Catalogue Manual (Publishing ID BKIDK0606).pdfjdkskmdmmd
This document provides a parts list for a gear case assembly with part numbers, names, quantities, serial numbers, and other specifications. It includes over 220 numbered parts for the gear case ranging from bolts and plugs to seals and an oil pump rotor assembly. The parts are grouped by reference number and some have remarks about new or replacement parts.
Kubota RTV900R HOMOLOGATED VERSION-EU Utility Vehicle Parts Catalogue Manual ...ujdjksmdmdm
This document provides a list of parts for frequently used items. It includes 200 parts ranging from fuses and light bulbs to filters, hoses, and other engine components. For each part, the document provides the part number, name in Polish and English, quantity, identification code or serial number if applicable, weight in kilograms, and any remarks.
This document provides a monthly report for July 2022. Key highlights include the lowest inventory level achieved, completion of 5 improvement projects, and safety improvements to turbine drain valves and raw water pond level displays. Notable were a faulty GPS clock and high numbers of open purchase requests and orders. Metrics on notifications, preventative maintenance, inventory, and Kaizen projects were also included.
Kubota BX231D5-C Tractor Parts Catalogue Manual (Publishing ID BKIDK5237).pdfaoxs635594
This document contains parts lists for various components of a Kubota engine:
- The crankcase parts list contains 20 parts including the crankcase assembly, caps, plugs, pins, and a seal.
- The oil pan parts list contains 7 parts including the oil pan assembly, drain plug, gasket, and bolts.
- The cylinder head parts list contains 14 parts including the cylinder head assembly, caps, plugs, guides, bolts, and gasket.
Kubota BX231D5-C Tractor Parts Catalogue Manual (Publishing ID BKIDK5237).pdff7useijdkdmd
This document contains parts lists for various components of a Kubota engine:
- The crankcase parts list contains 20 parts including the crankcase assembly, caps, plugs, pins, and a seal.
- The oil pan parts list contains 7 parts including the oil pan assembly, drain plug, gasket, and bolts.
- The cylinder head parts list contains 14 parts including the cylinder head assembly, caps, plugs, guides, bolts, and gasket.
Kubota BX231D5-C Tractor Parts Catalogue Manual (Publishing ID BKIDK5237).pdfjichenwaixz37
This document contains parts lists for various components of a Kubota engine. It lists 190 parts for frequently used items like starters, switches, filters, hoses, and mufflers. It also lists parts for the crankcase, oil pan, cylinder head, gear case, head cover, oil filter, and dipstick. Each part is given a number, part name in Polish and English, quantity, and other identifying information.
Kubota BX231D5-C Tractor Parts Catalogue Manual (Publishing ID BKIDK5237).pdff8ueijdkdm8u
This document contains parts lists for various components of a Kubota engine, including:
- Crankcase
- Oil pan
- Cylinder head
- Gear case
- Head cover
- Oil filter
It lists part numbers, names in Polish and English, quantities, serial numbers, weights, and remarks for each part listed for each component. The parts lists contain basic information about engine parts that would be used for maintenance or repair.
Kubota BX231D5-C Tractor Parts Catalogue Manual (Publishing ID BKIDK5237).pdfufjsekddmmd
This document contains parts lists for various components of a Kubota engine:
- The crankcase parts list contains 20 parts including the crankcase assembly, caps, plugs, pins, and a seal.
- The oil pan parts list contains 7 parts including the oil pan assembly, drain plug, gasket, and bolts.
- The cylinder head parts list contains 14 parts including the cylinder head assembly, caps, plugs, guides, bolts, and gasket.
Kubota BX231D5-C Tractor Parts Catalogue Manual (Publishing ID BKIDK5237).pdfujdjksmdmdm
This document contains parts lists for various components of a Kubota engine:
- The crankcase parts list contains 20 parts including the crankcase assembly, caps, plugs, pins, and a seal.
- The oil pan parts list contains 7 parts including the oil pan assembly, drain plug, gasket, and bolts.
- The cylinder head parts list contains 14 parts including the cylinder head assembly, caps, plugs, guides, bolts, and gasket.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Kubota B2230D Tractor Parts Catalogue Manual (Publishing ID BKIDK0597).pdfshuangminzou
This document provides a parts list for a gear case assembly with part numbers, names, quantities, serial numbers, and other specifications. It includes over 30 individual part listings for components of the gear case like bolts, plugs, seals, springs, and the gear case housing itself. The parts are specified for a Kubota engine model 230D gear case with serial numbers less than or greater than certain values.
Kubota B2230D Tractor Parts Catalogue Manual (Publishing ID BKIDK0597).pdfjiu16432
This document provides a parts list for a gear case assembly with part numbers, names, quantities, and other specifications. It includes over 30 individual part listings for components of the gear case like bolts, plugs, gaskets, springs, and the gear case housing itself. The parts are specified for a Kubota engine model 230D gear case with serial numbers less than or greater than certain values.
Kubota BX261DR Tractor Parts Catalogue Manual (Publishing ID BKIDK5264).pdfkdmra8udokmm
This document provides a list of parts for an engine oil filter. It includes 20 parts related to the oil filter, such as the filter cartridge, filter cover, sealing gaskets, bolts and o-rings. Each part is given a number, part name in Polish and English, quantity needed and weight. This appears to be a routine parts list for reference when replacing or servicing the engine oil filter.
Kubota BX261DR Tractor Parts Catalogue Manual (Publishing ID BKIDK5264).pdfjdkskmdmmd
This document provides a list of parts for an engine oil filter. It includes 20 parts related to the oil filter, such as the filter cartridge, filter cover, sealing rings, and mounting bolts. Each part is given a number, part name in two languages, quantity used, and weight. This appears to be a standard parts list from the manufacturer to identify the specific components that make up the engine oil filtering system.
The document provides a performance review summary for STPP for FY 2022-2023. Some key highlights include:
- STPP was awarded best performing thermal power station in the state sector.
- STPP ranked 1st in PLF among state power sector and 7th overall in India for FY 2022-23.
- Monthly plant load factor exceeded 90% for 6 consecutive months.
- Unit 1 achieved 100.03% PLF and 100% availability for the year.
- Civil works are ongoing for flue gas desulphurization system components.
Kubota BX261DC Tractor Parts Catalogue Manual (Publishing ID BKIDK5268).pdffujsekkdmdm3e1
This document provides parts information for an oil filter assembly:
- It lists 10 parts that make up the oil filter assembly including the oil filter cartridge, housing, and O-ring.
- The part numbers, names in Polish and English, quantities, and weights are provided for each part.
- It notes that the oil filter cartridge should be replaced when ordering a new assembly.
Kubota BX261DC Tractor Parts Catalogue Manual (Publishing ID BKIDK5268).pdf8fuujekdmmd3e
The document provides parts information for an engine, including:
- 190 parts listed with part numbers, names in Polish and English, quantities, serial numbers, weights, and remarks.
- The parts are grouped into sections for the crankcase, oil pan, cylinder head, gear case, and head cover.
- Gaskets, bolts, plugs, filters, hoses, and other common engine parts are included.
Kubota BX261DC Tractor Parts Catalogue Manual (Publishing ID BKIDK5268).pdfbxj85155043
This document provides parts information for an oil filter assembly:
- It lists 10 parts that make up the oil filter assembly including the oil filter cartridge, housing, and O-ring.
- The part numbers, names in Polish and English, quantities, and weights are provided for each part.
- It notes that the oil filter cartridge should be replaced when ordering a new assembly.
Kubota BX261DC Tractor Parts Catalogue Manual (Publishing ID BKIDK5268).pdfjdkskmdmmd
This document provides parts information for an oil filter assembly. It lists 20 parts that make up the assembly, including the oil filter cartridge, housing, gasket, bolts, and O-ring. The parts are identified by number, with the corresponding part number, name in Polish and English, quantity, and weight listed for each. Additional information provided includes serial numbers, remarks, and notes to order new parts.
Kubota BX261DC Tractor Parts Catalogue Manual (Publishing ID BKIDK5268).pdfkdmra8udokmm
This document provides parts information for an oil filter assembly. It lists 20 parts that make up the assembly, including the oil filter cartridge, housing, gasket, bolts, and O-ring. The parts are identified by number, with the corresponding part number, name in Polish and English, quantity, and weight listed for each. Additional information provided includes serial numbers, remarks, and notes to order new parts.
Kubota B2530DC Tractor Parts Catalogue Manual (Publishing ID BKIDK0606).pdfkdmra8udokmm
This document provides a parts list for a gear case assembly with part numbers, names, quantities, serial numbers, and other specifications. It includes over 220 numbered parts for the gear case ranging from bolts and plugs to seals and an oil pump rotor assembly. The parts are grouped by reference number and some have remarks about new parts if the serial number is above or below a certain threshold.
Kubota B2530DC Tractor Parts Catalogue Manual (Publishing ID BKIDK0606).pdfjdkskmdmmd
This document provides a parts list for a gear case assembly with part numbers, names, quantities, serial numbers, and other specifications. It includes over 220 numbered parts for the gear case ranging from bolts and plugs to seals and an oil pump rotor assembly. The parts are grouped by reference number and some have remarks about new or replacement parts.
Kubota RTV900R HOMOLOGATED VERSION-EU Utility Vehicle Parts Catalogue Manual ...ujdjksmdmdm
This document provides a list of parts for frequently used items. It includes 200 parts ranging from fuses and light bulbs to filters, hoses, and other engine components. For each part, the document provides the part number, name in Polish and English, quantity, identification code or serial number if applicable, weight in kilograms, and any remarks.
This document provides a monthly report for July 2022. Key highlights include the lowest inventory level achieved, completion of 5 improvement projects, and safety improvements to turbine drain valves and raw water pond level displays. Notable were a faulty GPS clock and high numbers of open purchase requests and orders. Metrics on notifications, preventative maintenance, inventory, and Kaizen projects were also included.
Kubota BX231D5-C Tractor Parts Catalogue Manual (Publishing ID BKIDK5237).pdfaoxs635594
This document contains parts lists for various components of a Kubota engine:
- The crankcase parts list contains 20 parts including the crankcase assembly, caps, plugs, pins, and a seal.
- The oil pan parts list contains 7 parts including the oil pan assembly, drain plug, gasket, and bolts.
- The cylinder head parts list contains 14 parts including the cylinder head assembly, caps, plugs, guides, bolts, and gasket.
Kubota BX231D5-C Tractor Parts Catalogue Manual (Publishing ID BKIDK5237).pdff7useijdkdmd
This document contains parts lists for various components of a Kubota engine:
- The crankcase parts list contains 20 parts including the crankcase assembly, caps, plugs, pins, and a seal.
- The oil pan parts list contains 7 parts including the oil pan assembly, drain plug, gasket, and bolts.
- The cylinder head parts list contains 14 parts including the cylinder head assembly, caps, plugs, guides, bolts, and gasket.
Kubota BX231D5-C Tractor Parts Catalogue Manual (Publishing ID BKIDK5237).pdfjichenwaixz37
This document contains parts lists for various components of a Kubota engine. It lists 190 parts for frequently used items like starters, switches, filters, hoses, and mufflers. It also lists parts for the crankcase, oil pan, cylinder head, gear case, head cover, oil filter, and dipstick. Each part is given a number, part name in Polish and English, quantity, and other identifying information.
Kubota BX231D5-C Tractor Parts Catalogue Manual (Publishing ID BKIDK5237).pdff8ueijdkdm8u
This document contains parts lists for various components of a Kubota engine, including:
- Crankcase
- Oil pan
- Cylinder head
- Gear case
- Head cover
- Oil filter
It lists part numbers, names in Polish and English, quantities, serial numbers, weights, and remarks for each part listed for each component. The parts lists contain basic information about engine parts that would be used for maintenance or repair.
Kubota BX231D5-C Tractor Parts Catalogue Manual (Publishing ID BKIDK5237).pdfufjsekddmmd
This document contains parts lists for various components of a Kubota engine:
- The crankcase parts list contains 20 parts including the crankcase assembly, caps, plugs, pins, and a seal.
- The oil pan parts list contains 7 parts including the oil pan assembly, drain plug, gasket, and bolts.
- The cylinder head parts list contains 14 parts including the cylinder head assembly, caps, plugs, guides, bolts, and gasket.
Kubota BX231D5-C Tractor Parts Catalogue Manual (Publishing ID BKIDK5237).pdfujdjksmdmdm
This document contains parts lists for various components of a Kubota engine:
- The crankcase parts list contains 20 parts including the crankcase assembly, caps, plugs, pins, and a seal.
- The oil pan parts list contains 7 parts including the oil pan assembly, drain plug, gasket, and bolts.
- The cylinder head parts list contains 14 parts including the cylinder head assembly, caps, plugs, guides, bolts, and gasket.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
6th International Conference on Machine Learning & Applications (CMLA 2024)ClaraZara1
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
ACEP Magazine edition 4th launched on 05.06.2024Rahul
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Low power architecture of logic gates using adiabatic techniquesnooriasukmaningtyas
The growing significance of portable systems to limit power consumption in ultra-large-scale-integration chips of very high density, has recently led to rapid and inventive progresses in low-power design. The most effective technique is adiabatic logic circuit design in energy-efficient hardware. This paper presents two adiabatic approaches for the design of low power circuits, modified positive feedback adiabatic logic (modified PFAL) and the other is direct current diode based positive feedback adiabatic logic (DC-DB PFAL). Logic gates are the preliminary components in any digital circuit design. By improving the performance of basic gates, one can improvise the whole system performance. In this paper proposed circuit design of the low power architecture of OR/NOR, AND/NAND, and XOR/XNOR gates are presented using the said approaches and their results are analyzed for powerdissipation, delay, power-delay-product and rise time and compared with the other adiabatic techniques along with the conventional complementary metal oxide semiconductor (CMOS) designs reported in the literature. It has been found that the designs with DC-DB PFAL technique outperform with the percentage improvement of 65% for NOR gate and 7% for NAND gate and 34% for XNOR gate over the modified PFAL techniques at 10 MHz respectively.
International Conference on NLP, Artificial Intelligence, Machine Learning an...gerogepatton
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
3. REVIEW PRODUCTION WK-01
(Bcm)
1-Oct-22 2-Oct-22 WTD
Plan (Bcm) 7,821 7,821 15,642
Actual Truckcount (Bcm) 8,352 5,152 13,504
Achievement (%) 107% 66% 86%
Rain & Slippery 0.0 9.2 9.2
107%
66%
86%
0%
20%
40%
60%
80%
100%
120%
140%
160%
180%
0
2,000
4,000
6,000
8,000
10,000
12,000
OB Production Chart Pit 6 Periode 01 - 02 Oktober 2022
W1 W2 W3 W4 W5 W6 MTD
Plan 15,642 54,137 54,137 54,137 54,137 7,821 240,013
Act Truckcount 13,504 13,504
Act Survey 13,576 13,576
Deviasi 0.53% 0.53%
0.53% 0.53%
-30.00%
-20.00%
-10.00%
0.00%
10.00%
20.00%
30.00%
0
10,000
20,000
30,000
40,000
50,000
60,000
(Bcm)
MTD OB Production Chart Pit 6 Periode Oktober 2022
4. REVIEW PRODUCTION WK-01
1-Oct-22 2-Oct-22 WTD
Plan Produksi (Bcm) 7,821 7,821 15,642
Actual Produksi (Bcm) 8,352 5,152 13,504
Loss/Gain Produksi (Bcm) 531 (2,669) (2,138)
531
(2,669)
(2,138)
(4,000)
(3,000)
(2,000)
(1,000)
0
1,000
2,000
3,000
4,000
5,000
6,000
0
3,000
6,000
9,000
12,000
15,000
OB Production Chart Pit 6 Periode 01 - 02 Oktober 2022
1-Oct-22 2-Oct-22 WTD
Plan Produksi (Bcm) 7.821 7.821 15.642
Actual Produksi (Bcm) 8.352 5.152 13.504
Loss/Gain Produksi (Bcm) 531 -2.669 -2.138
Plan Fleet 3 EX x 11 ADT 3 EX x 11 ADT 3 EX x 11 ADT
Actual Fleet 2 EX x 7 ADT 2 EX x 7 ADT 2 EX x 7 ADT
Loss Opportunity 1 EX x 4 ADT 1 EX x 4 ADT 1 EX x 4 ADT
5. REVIEW RAIN & SLIPPERY WK-01
Okt'22 Rain Time Slippery S/R
WEEK I 5,18 4,03 78%
WEEK II
WEEK III
WEEK IV
WEEK V
WEEK VI
Total 5,18 4,03 78%
DATE
Rain Delay
S/R
Rain
Time
Slippery
1-Oct-22 0 0 0%
2-Oct-22 5,18 4,03 78%
Total 5,18 4,03 78%
0%
230%
0
5
10
15
20
25
-1.00
4.00
9.00
14.00
19.00
24.00
(HRS)
1-Oct-22 2-Oct-22
Plan Rain & Slippery (Hrs) 4.00 4.00
Actual Rain & Slippery (Hrs) 0.0 9.21
Deviasi (%) 0% 230%
Actual Rainfall (mm) 0 23
Rain & Slippery Periode 01 - 02 Oktober 2022
W1 W2 W3 W4 W5 W6 MTD
Plan Rain & Slippery (Hrs) 8.00 28.00 28.00 28.00 28.00 4.00 124.00
Actual Rain & Slippery (Hrs) 9.21 9.21
Deviasi (%) 115% 7%
Actual Rainfall (mm) 23 23
23 23
0
20
40
60
80
100
120
140
160
180
200
0.00
10.00
20.00
30.00
40.00
50.00
60.00
70.00
(HRS)
MTD Rain & Slippery Oktober 2022
16. ATTENDANCE EMPLOYEE OKTOBER’ WK-01
• Average Attendance Excavator 94%
• Average Attendance ADT 97%
• Average Attendance Bulldozer 100%
• Average Attendance Grader 100%
EXCAVATOR
1 2
TOTAL MANPOWER 10 10
PLAN 7 8
ACTUAL 7 7
PERSENTAGE 100% 88%
Selisih : 3 3
OFF 1
IZIN TERBAYAR
IZIN TAK TERBAYAR
S AKIT 1
ALP A
CUTI JOB S ITE 2 2
LIBUR
ADT
1 2
TOTAL MANPOWER 25 25
PLAN 21 18
ACTUAL 21 17
PERSENTAGE 100% 94%
Selisih : 4 8
OFF 1 3
IZIN TERBAYAR
IZIN TAK TERBAYAR
S AKIT 1
ALP A
CUTI JOB S ITE 3 4
LIBUR
BULLDOZER
1 2
TOTAL MANPOWER 6 6
PLAN 4 4
ACTUAL 4 4
PERSENTAGE 100% 100%
Selisih : 2 2
OFF 1 1
IZIN TERBAYAR
IZIN TAK TERBAYAR
S AKIT
ALP A
CUTI JOB S ITE 1 1
LIBUR
GRADER
1 2
TOTAL MANPOWER 2 2
PLAN 1 1
ACTUAL 1 1
PERSENTAGE 100% 100%
Selisih : 1 1
OFF
IZIN TERBAYAR
IZIN TAK TERBAYAR
S AKIT
ALP A
CUTI JOB S ITE 1 1
LIBUR
19. OVERVIEW PIT 6-NORTH
PLAN – OKTOBER 2022
+40
: Crest Tinggi Jenjang : 5 Meter Volume Overburden : 240,000 Bcm
: Toe Lebar Bench : 5 Meter Coal Expose Area : 4,100 M²
: Road Slope : 50 ˚
: Bdy Sequence Luas Area : 3.4 Hektar
25. ISSU HRGA WEEK-01 OKTOBER 2022
No. Problem Identifikasi Correction Status PIC Due Date Note
1 Rekrutmen
Kekurangan Manpower :
1. Driver DT 19Mp
2. Opr Excavator 3Mp
3. Opr Motorgrader 3Mp
4. Foreman Mining 2Mp
5. Opr Compactor 2Mp
6. Opr Bulldozer 1Mp
7. Checker 3Mp
1. Sudah di lakukan test tertulis pada pelamar posisi Driver DT
sebanyak 19 orang
2. Sudah dilakukan test tertulis pada pelamar posisi opr excavator
sebanyak 2 orang
3. Sudah dilakukan test tertulis pada pelamar posisi opr motorgrader
sebanyak 1 orang
Open
HR &
Trainner
W2 Oktober 2022 Open
2 Annual MCU
Akan dilakukan program annual MCU
Tahap II (dua) bagi karyawan yang sudah
1 tahun masa kerja
Sudah 90% berjalan program annual MCU Tahap II (dua) Open HR W1 Oktober 2022 Open
3 Pembangunan Office Akan dilakukan pembangunan office Sudah tahap administrasi permintaan dana untuk pembangunan office Open GA W1 Oktober 2022 Open
4
Pembangunan Shalter
Akan dilakukan pembangunan shalter
dan sudah berjalan 50% proses
pembangunan shalter
Sudah dilakukan pemindahan pada kaki kaki tiang shalter ke lokasi baru
yang sudah di tentukan, dalam tahap proses pemadatan lokasi shalter,
apabila sudah dilakukan pemadatan lokasi shalter, maka proses
pembangunan shalter akan dilanjutkan oleh vendor
Open GA W2 Oktober 2022 Open
29. EMPLOYEE SICKNESS
WK 1 WK 2 WK 3 WK 4 WK 5 Total
MAN POWER 2 2 4 1 1 10
Setatus Pulang 1 1 2
Setatus Ljt Bekerja 2 1 4 1 8
0
2
4
6
8
10
12
AXIS
TITLE
KUNJUNGAN KLINIK LIM
ISPA
FARINGITIS
(Radang)
CEPHALGIA
(Sakit Kepala)
FEBRIS
(Demam)
FROZEN
SHOULDER
SAKIT GIGI
ASAM
LAMBUNG
TOTAL
WK1 2 2 1 5
WK2 3 1 2 1 7
WK3 5 1 2 1 9
WK4 2 3 5
WK5 1 1
0
1
2
3
4
5
6
7
8
9
10
AXIS
TITLE
MOST EMPLOYEE DISEASES
30. HAZARD REPORT INFORMATION
Descripsi
Peletakkan track exca
sementara kurang rapi di
workshop lama KPS
Problem
Menunggu exca 18 keluar dari
parkiran ABJ, status exca on
progress dari FMC
31. HAZARDOUS WASTE
11 11
1
2
3 3
6
1 1
1 1 1
2
1
SISA IN OUT SISA IN OUT SISA IN OUT SISA IN OUT SISA IN OUT
WK 1 WK 2 WK 3 WK4 WK 5
HAZARDOUS WASTE
OLI BEKAS FILTER HOSE AKI BEKAS
Storage
Number
Storage
Location
Waste
Source
Waste Name In (Drum) Out (Ton)
Storage
Drum
TPS #WS
- WS PT. KOBEX OLI BEKAS 6 12
WS PT. KOBEX FILTER 0 1
WS PT. KOBEX HOSE 0
3