This document summarizes the professional experience of Swaminathan Balaraman. He has over 15 years of experience in avionics and aerospace engineering projects. Some of the key roles and responsibilities mentioned include:
- Working as an Associate Project Manager on projects for Rockwell Collins and Crane EC-225 involving requirements management, testing, and quality assurance.
- Serving as Project Manager for an Airbus SESAR project involving trajectory messaging and requirements development.
- Technical leadership roles involving requirements engineering for Embraer's E2 flight control systems and Moog India.
- Specialist roles in engine management systems for Renault-Nissan involving diagnostics, tool development, and testing.
Mechanical Engineering CDR Sample (ANZSCO Code: 233512)Olivia Jackson
Free CDR Sample from CDRReport.org. This Mechanical Engineering CDR is written by CDRReport.org experts and already submitted and approved by EA. If you need assistance with your CDR, contact us at info@cdrreport.org or visit www.cdrreport.org.
Note: This CDR is completely plagiarised and is only for reference purposes, Do Not Copy!
Through photos of our team — representing 20 nationalities — and their words, our team members share their point of view on why they stand proud as Clariba — giving our followers, customers, partners and even future employees a glimpse into our culture and workplace. Follow us on LinkedIn, Instagram, Twitter to be part of the I Am Clariba experience — #BeClariba.
Mechanical Engineering CDR Sample (ANZSCO Code: 233512)Olivia Jackson
Free CDR Sample from CDRReport.org. This Mechanical Engineering CDR is written by CDRReport.org experts and already submitted and approved by EA. If you need assistance with your CDR, contact us at info@cdrreport.org or visit www.cdrreport.org.
Note: This CDR is completely plagiarised and is only for reference purposes, Do Not Copy!
Through photos of our team — representing 20 nationalities — and their words, our team members share their point of view on why they stand proud as Clariba — giving our followers, customers, partners and even future employees a glimpse into our culture and workplace. Follow us on LinkedIn, Instagram, Twitter to be part of the I Am Clariba experience — #BeClariba.
I seek for full time opportunities in the field of mechanical engineering . I specialize in controls engineering and experienced in the field of product quality and after sales engineer.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
1. SWAMINATHAN BALARAMAN
BE, MS (By Research), AVIONICS, M I T
L&T SOUTH CITY APARTMENTS, BANGALORE – 560 076
Phone:+91 9731864926, +919738889292
beswaminathan[at]yahoo[dot]co[dot]uk
beswaminathan[at]gmail[dot]com
D.O.B: 04-September-1981
Skype: beswaminathan
Linked in profile: i n .li n ke d in .co m /in /ae ro sa mi
APM @ HCL Tech Project: Rockwell Collins (GNSS), CRANE
Task Scheduling, Training, Review and monitoring of deliverables (SW Test cases).
Conducting CAPA (Causal Analysis & Preventive Action) and Requirements Impact analysis.
Risk identification and mitigations plan in compliant to PMP document.
Coordinating with SQA for DO-178C compliance.
As a Trainer (on demand) in Organisational Technical Training activities.
As QA for CRANE EC-225 project, managing SY Verification, SW Development & SW Verification.
Conducted Gap Analysis, Identifying Process Non-compliance (CMMi) and Risk Management.
♦ Working as Associate Project Manager (Technical) since April 2015, HCLT – Bangalore.
PM @ Sii ITeS (start-up) Project: Airbus FMS–SESAR – i4D Trajectory & eFFU
Co-authored Initial 4D Trajectory A429 message structure derived from A702A-3.
Analysed SESAR system requirements (SSS), System Safety Assessment (SSA/ARP4761), updated
the SA-LR ICD (SER) and resolved the same with suppliers (Honeywell, Thales and Saffran).
Worked in Airbus SER ICD for EIS, i4D Trajectory & ATSU with Sii Toulouse, France (Onsite).
Prepared Flight Test Request (FTR) for MCDU-R (ATA 22-82) for multiple power sources.
Performed Failure Condition Analysis and FMS design for SESAR project.
As Business Analyst, secured the eFFu project from Sii France.
♦ Worked as a Project Manager (Technical) with SII India ITeS (start-up), Aug14 – Feb15.
TL @ Project: EMBRAER E2 Primary Flight Control Systems
Engineering & Requirements Management for Primary and High Lift Flight Control Systems using
IBM DOORS tool complying with ARP4754 standard and reporting through Agile-Scrum process.
Involved in Development of primary Flight Control System Internal-ICD (A429 & CBDL)
Involved in review of Embraer E2 Wiring diagram for Primaries, Spoilers and FCC
Involved in actuator, inceptor allocation and CBDL internal linking at different levels.
Involved in PDR activities for Moog Inc, NY, USA (onsite)
♦ Worked as Technical Lead for Flight Control System(Embraer) and Project Manager for handling
EMBR E2 Iron Bird Requirements in Moog India Technology Centre, May2013 to Aug2014
Other Responsibilities:
As DOORS admin for Moog India, new project configuration and access control.
INNOVATION
Ideas submitted
Swift Operation of Engine Thrust Reverser in Passenger Aircraft
Requirements and workflow for Requirements Management Tool -
Automation
Specialist@ Project: Renault Nissan – Engine Management Systems – CMF1
Analysed Diagnostic Fault Codes for OEM and RB layers for Renault Nissan CMF1 project
Designed, developed & validated an automation tool that differentiate automatically the
functional changes in system SW and received the award from Department Head.
Released the System Specific Data (SSD) for the project and conducted IO tests in HIL loop.
Worked in implementation of Fuel Temperature Emulation (FTE)
Worked in implementation of Pressure Limiting Injection (PLI) for Euro7
Mentoring software team on different vehicle functions with know how and providing testing
strategy.
♦ Worked as a Specialist (equivalent to APM) in Robert Bosch(RBEI), June2011-May2013
Cross Functional Activities:
Worked as a competency development manager in department level covering 140+associates.
Planned, scheduled and executed training plans.
2. INNOVATION
Ideas submitted
in BOSCH
Multi axis fuel injector
Improving fuel efficiency in IC engine by optimal use of operating
parameters
Methods of varying engine displacement for reciprocating engines.
Static Fuel quality detection – concept
Drunken driving deduction
Improving passenger safety during life threatening situation.
Did BE final year project at PRICOL Coimbatore on Automobile domain 2004 (Vehicle Payload Indicator)
Worked as a consultant for Compaq HP project in SGS, July 2004 - Jan 2006
Senior SWE – Cyient (Infotech) Airbus 400M – Load Master Control (LMC)
Performed the System testing activity(Test Cases and Procedures) for Airbus400M LMWS module
Executed the IOC test cases in Techsat ADS2 real time simulator (SIB) along with A400M Flight
hardware at AIRBUS, Germany (onsite).
Analysed the MFD (Scade) requirements for IOC & SOC phase for civilian and military versions.
♦ Worked as a Senior Engineer in Infotech Enterprises (Cyient), September2009 – June2011
Senior Engineer - HTSL Project: Airbus Flight Management Systems
Analyzed & Verified System requirements for Airbus A380 PERF module in FMS (SRD).
Worked on A380 MFD initial development tasks (SER) and PDB Robustness update.
Software design & development (SDD & SRC) for Speed Change prediction and display in ND.
Involved in system level fault analysis & reporting for A380 FMS.
Certification: Six sigma Greenbelt, July 2009
Self-Learnings:
General awareness on Airbus Civil aircraft series of cockpit systems and flight operations briefing.
General awareness on Airbus FCOM for ATA 22 and ABD100
♦ Worked as a Senior Engineer in Honeywell Madurai, June08 – Aug09 (after submitting MS thesis)
INNOVATION
- ideas worked out
at Honeywell 2008
FMS - Auto derate function, Avoiding Aircraft landing Accidents (ALA) & Projector less
HUD
Power Steering in fighter jets
Deep Space Network – Honeywell Technical Symposium 2008
Project Associate - CASR Project: ANUSAT – Satellite Attitude Control System
Project in collaboration with CASR (MIT) & ISRO Satellite centre, Bangalore. Launch year 2009
Developed the Software Requirement Specifications Document (SRS)
Validated control algorithms for stabilizing Micro satellite for the modules spin axis orientation
towards normal to the sun vector, which is implemented first time in Indian satellites.
Work done for Closed Loop Testing (HIL) interfacing magnetometer and sun sensor.
Developed Ground Procedures to recover the spacecraft Attitude during contingency
♦ Worked as a Project Associate, MICSAT CASR, MIT Chrompet, Chennai, May 2006 - May2008
MS Research Project SPACE MISSION ANALYSIS AND DESIGN FOR TACTICAL SPACECRAFT
Spacecraft Attitude Control System supports both spin stabilized as well as 3 axes stabilisation
Mission analysis for Flight Dynamics and Attitude control simulated using COTS software
♦ This research was undertaken for MS (By Research) thesis, while working as Project Associate at
MICSAT CASR, MIT Chrompet, Chennai – Feb 2006 to June2008. Graduated in Feb 2010.
Publications Research work carried out at MIT is published in the following conferences
Paper 1 Space Mission Analysis & Design for Tactical Spacecrafts
Paper 2 Magnetic Attitude Control for a Spinning Spacecraft with Cross Product of Inertia
Conference IEEE AIAA Aerospace International Conference, USA, March 7-14, 2009
Paper 3 Closed Hardware in loop real time attitude control simulator for a Spinning Spacecraft
Conference National Conference on Instrumentation & Control -ICECON 07, NIT Trichy, 2007
CV - Version: 1.61 2
3. ACADEMIC
CREDENTIAL
CV - Version: 1.61 3
* 2000-2004 Shanmugha College Of Engineering (now SASTRA) affiliated to Bharathidasan University
B.E in Electronics and Instrumentation Engineering – Full time
REFERENCE Mr. S.Gurudev, (Former Group Director ADE)
Section Head, FTE
Moog India Technology Center (MITC)
guru10122003[at]yahoo.co.in
Mr. Rajesh Chaubey / Mr. Ravi Holla
Project Lead, iFMCNS – Platforms & PERF,
Honeywell Technological Solutions Lab,
Rajesh.Chaubey[at]honeywell[dot]com
Mr. Srihari Jayathirtha,
Project Lead, iFMCNS,
Honeywell Technological Solutions Lab,
Srihari.Jayathirtha[at]honeywell[dot]com
Mr. Niranjan Mariyanna,
Senior Expert, ECW - ECU System Dev,
Robert Bosch Engineering and
Business Solutions Limited (RBEI/ECW)
Niranjan.Mariyanna[at]in[dot]bosch[dot]com
* 2006-2010 Madras Institute of Technology [MIT], Anna University, Chennai
MS (By Research) in Avionics (Aviation Electronics) – Full Time
Research Space Mission Analysis & Design for Tactical Spacecraft