1. Ali ALI
MechanicalEngineer
Lebanese – 25 years
Trilingual (Fluent in English and French – Arabic mother tongue)
Basra, Iraq
+964-7727026752
Beirut, Lebanon
+961-70557724
ali.ali.meca@gmail.com
Seeking a challenging engineering position in a reputable company that offers an
opportunity to improve my knowledge in the field of mechanical engineering and where
my skills can be employed to build a solid career based on sturdy qualities combining
techniques, business and management
ProfessionalExperience
 Réhabilitation of kfarchimalaboratory (kfarchima) (01/08/2014)
1. Shop drawing (plumming, drainage, HVAC).
10/2014
06/2012
10/2014
NAEL & BIN HARMAL HYDROEXPORT ( NBHH). U.A.E (ABU DHABI)
 Shat al arab 3 (Basra-Iraq) (01/10/2014)
1. Site engineer.
2. Shop drawing (plumbing, drainage, HVAC, power, lighting…)
3. Coordination with electrical and mechanical shop drawings.
4. Preparing the purchase order for the materials needed in
the project.
5. Mechanical calculation (cooling and heating loads, pumps
size,drain pipes,water supply pipes …).
6. Preparing techincal submittals.
7. Comparison sheets.
MECHANICAL ELECTRICAL EQUIPMENTS & SYSTEMS INTERNATIONAL
(MEES INT). Bierut

2. 2. Coordination with electrical and mechanical shop drawings.
3. Preparing the purchase order for the materials needed in the
project.
4. Mechanical calculation (cooling and heating load, pumps size,
fans,drain pipes, water supply pipes….).
5. Studying the specs and all risers in the project.
6. Preparing technical submittals.
 Rifai Roastery (HALET) (01/10/2012 till 1/8/2014)
1. Project engineer
2. Site engineer
3. Shop drawing (plumming, drainage, ventilation)
4. Coordination with electrical and mechanical shop drawings
5. Preparing the purchase order for the materials needed in the
project
6. Studying the specs and all risers in the project
7. Communicate and coordinate with the owner (consultant)
(discuss all the pending and missing points and discuss the
submittal).
8. Communication and discussion with different suppliers to get
the better offers, so the project would be more profitable:
a. Comparison between add offers from the suppliers, the nearest to
our target price and the complied with the specs and the design.
b. Negotiate with the suppliers to get more discounts.
9. Preparing the purchase order for the materials needed in the
project.
10. Preparing the payment certificates that belongs to consultant and
for the sub-contractors.
 MraijehSportive and Cultural Club (MRAIJEH)(01/06/2012 till 01/10/2012)
1. Site engineer
2. Shop drawing (plumming, drainage, ventilation)
3. Coordination with electrical and mechanical shop drawings
12/2011
06/2012
Design and Sales Engineer. (Swimming Pool, Water Treatment,
Sona, Jacuzzi, R.O System …). TECH.WATER company. Antelias.

3. 03/2011
12/2011
Director of Maintenance Department. TECH WATER company. Antelias.
Education
2011
2014
MS in Mechanical Engineering. Lebanese International University (LIU).
Beirut.
06/2012
09/2012
2007
2011
LEADERSHIP SKILLS For Engineers. American University of Beirut (AUB).
BS in Mechanical Engineering. Lebanese International University (LIU).
Beirut.
Master Thesis project
Expérimentalstudy of tubes-and-finsheatexchangerthermal performance inrelationwiththe non-
uniformityof the upstreamvelocityandtemperature distributions.Itsmainobjective istoobtain
experimentallynon-uniformvelocityandtemperature distributionsupstreamof aheatexchangerwith
prescribedmeanandstandarddeviation.
Senior Project
Designof an HVAC Systemfora ResidentialBuildinginBeirutbycalculatingthe coolingandheatingloads
usingthe HAP software andcomparingthe datawithhand calculations.Several orientationsof the building
were appliedtodecrease the heattransfer. All neededequipmentwasalsoselected.
Computer skills
EngineeringSoftwares :Revit,Primavera,AutoCAD, HAP,Ductilator, ASHRAEDuctFittingDatabase
Programming:MatLAB, C++
ExcellentproficiencyinMsOffice,MsWindows