Moshe Arabov has over 30 years of experience in RF engineering. He has expertise in measuring and characterizing components and circuits using network analyzers and probe stations. Some of his areas of focus have included WiGig, WiFi, WiMax, and LAN transmission and testing. He has experience automating measurements, managing test equipment and inventory, and optimizing hardware and software for RF measurements.

1. Moshe Arabov
Yehud – Israel 972-54-5691073 moshearabov@gmail.com
Areas of knowledge and expertise
 S-parameters characterizing components and amplifiers, mixers, filters, balun on boards, board
trace using the Network.
 Training, performance measurement and / or injection signal component in the Silicon open
through active or passive probes.
 Training, performance, and measuring the measurement station Pico-Probe Wafer-level silicon
and boards.
 Building hardware setup for measurements of transmit and receive WiGig, Wi-Fi, WiMax, LAN
10Mb, LAN 100Mb.
 Automated scripting in C # or Matlab measurements: EVM, P1dB, Gain flatness, Current
Consumption, Gain Step EVM, P1dB, Gain Flatness, Current Consumption and Gain Step.
 Managing and maintaining software and hardware on Pico-Probe measuring stations.
 Management and maintenance of their inventory of active and passive probes.
 Management and maintenance and hardware around and companion stations Pico-Probe.
Experience:
8/2016 – 1995 Intel Israel
2016 – 2012 RF Practical Engineer WiGig GHz60
.
• Responsible for planning and characterization testing individual amplifiers and passive
circuits on the field 60GHz Silicon-Wafer on Probe-Pico station.
• Planning and responsibility for broadcasting WiGig specification testing frequencies
60GHz and 10GHz.
• Planning, construction and optimization of hardware and software in C#
measurements WiGig transmission frequencies 60GHz and 10GHz.
• Guidance for measuring and characterizing the probe pico station at all levels as:
 Wafer-Silicon
 Silicon Chip on Boards
 Passive Boards
• Management and maintenance of their inventory of probe active and passive stations
60GHz Pico-Probe field.
2012 – 1996 RF Practical Engineer WiFi, WiMax
• Responsible for planning and characterization testing discrete amplifiers and mixers
and passive circuits Wifi and WiMax field on Silicon-Wafer Probe-Pico station.
• Responsibility for planning and testing of chips open a probe active and/or passive in
the field of WiMax and Wifi.
• Planning and responsibility for testing reception and transmission specification for
WiMax and Wifi field.
• Design and responsible for the testing and characterization of absorption or
transmission field 10Mb LAN, 100Mb LAN.
• Planning, construction and optimization of hardware and software languages C# and
Matlab absorption or transmission measurements in the field of WiMax and Wifi.
• Training performance measurement and/or injecting a signal into the open component
Probe Silicon using active and/or passive.
• Management and maintenance of their inventory of probe active and passive stations
WiFi Pico-Probe field.

2. 1995 –1989 Develop and train digital and analog circuits. Oritek a physical measurement
equipment manufacturing.
• Develop and train free running oscillator Oscillator not depending on temperature and
composition of the minimal area on the PCB components and maintaining Isolation.
• Construction and assembly of circuits with linear amplifiers with very low currents
consumption with negligible influence of temperature Temperature drift.
• Construction and assembly of comparing digital and priests FVC with negligible
influence of temperature Temperature drift.
1989 – 1985 Teaching of electricity and electronics. High School Amal Petah Tikva and ORT
Lod.
Education
Studies for a BA in Electrical Engineering, College HIT Holon.
Practical electronic engineer, Ort Singalovsky.
Languages:
Hebrew, Russian – mother tongue.
English – good.
2