1. CURRICULUM VITAE
OBJECTIVE
To undertake a challenging new career opportunity as a
Supplier Quality Engineer in an automotive industry where I can
utilize my relevant qualifications and experience gained over the
past 5 years. Having acquired high level of competency in SQA, I
am positive that I would make a great addition to your leading
company.
CareerSnapshot
A dynamic professional with quality Assurance experience of
5 years in automobile company.
Presently working in Hella India lighting LTD, Derabassi
Chandigarh Punjab as Quality Engineer in I.Q.C. department from
25th April 2016 to till date.
Four years’ experience of SQA (NPD) Department in Subros ltd
Manesar Gurgaon HR.
Certified internal auditor for ISO 9001/2015 by TUV SUD.
CMM (Karl Zias & Wenzel)
IQC in charge at Amber (Panasonic) Enterprises Dehradun
from Jan 2016 to April 2016.
Guest lecturer of Drawing, Mechanics, Theory of machine at
A.D.R.S.I.T.M. Aligarh U.P. from July 2010 to Dec 2011.
QUALIFICATIONS
B.E. in Mechanical Engineering from IME Mumbai in 2016.
Three year diploma in Mechanical Engineering with 75% from
UPBTE in 2010.
Auto CAD from CAD/CAM Solution.
10th Pass from Allahabad Board with 70% in 2007.
About Hella Lighting
HELLA is a global, family-owned company listed on the stock
exchange that employs some 32,000 members of staff at over 100
locations in more than 35 countries. With more than 6,000 people
working in research and development, HELLA is one of the most
important innovation drivers on the market. In addition, with sales
of around 5.8 billion Euros in fiscal year 2014/2015, the HELLA
Group is one of the top 40 automotive parts suppliers in the world
and one of the 100 largest German industrial companies
Gaurav Kumar
Email:
gaurav.sambariya@gmail.c
om
Mobile:
9717761098,9592761098
Permanent Address:
GauravKumar
S/O Shree RajveerSingh
V.P.O Bamoti,Teh-Khair
Dist. - Aligarh, UP India.
Training:-
Six Sigma Basic(DMAIC)
Certifiedinternalauditorby
TUV rein land
ISO 9001/2015
DoE (Design of
Experiments)
8D Mythology
PPAP
APQP
7QCTools
MSA
GD&T
SPC
Strength:-
Dedicated
Dynamitic
Self-Starter
2. WORKING EXPERIENCE
Hella India lighting Ltd Derabassi, Punjab from April 2016 to till date.
Monitoring of all Incoming Inspection of the parts and coordinating the inspection
activity.
Updating GRN status in systemand timely information to the Suppliers regarding
status of supplied parts.
PPM calculations of all BOP parts and improve its level.
Daily morning meeting with HODs to short out daily line rejection and inform to
supplier to improve part quality.
Raising NCR in case of non-conformance observed in the receipt or assembly lines
and closes them.
Preparation and Maintenance of Incoming documents like PDI, Test Reports,
Inspection reports, MTC reports etc.
Follow up with Supplier Quality Engineer for timely Closure of 8D raised against the
Quality Issues from suppliers at receipt and assembly lines.
Monitor the Closure of Quality issues and provide timely feedback to suppliers.
Work in close coordination with In- Process Quality team to analyse the issues faced
on Assembly lines.
Improvements to be carried out with in department and in company in close
coordination with In Process Quality and Production team.
Responsible for Audits both Internal and External against ISO/TS 16949 and VDA 6.3
Responsible for the Closure of NC’s in Internal and External audits.
Supplier system and process audit as per schedule and sudden in case of serious
issues to close them.
New part development at supplier end.
Working with supplier of moulding, sheet metals, rubber, packing etc.
Training like GD&T, SPC, MSA, Instruments usage given to operators/STA
Current Projects
All child parts revalidation and plating improvements through SST.
All PFD, CP & PFMEA review and updation.
D.O.L. conversion of wire harness from Jot wire India Pvt Ltd.
Elimination of warranty failure in B.C.O.S.
Elimination of malfunctioning in Map reading Lamp.
Gauge implementation for IQC and Line.
SQIG team leader to eliminate repeated issues at IQC and Alternate supplier
development for existing parts
3. Previous 1 Subros Ltd ManesarHR from Feb2012 to Jan2016.
Layout inspection of all type of NPD samples like plastic, sheet metal, Aluminium
Rubber etc. and making Sample inspection report (SIR) and take OK/NG decision.
Inspection of regular parts (sheet metal, Aluminium) according to IT Plan and take
OK/NG decision.
Raw material inspection as per Drawing.
Layout inspection on CMM. (Co-ordinate measuring machine)
Preparation of all PPAP, QACM file.
PPAP submission to costumer on committed time.
NPD projects handling and conducting QACM (Quality Assurance Committee
meeting) .with management.
Responsible for inspection of BOP Parts at Initial Stage of New Product Launch.
Making IT Plan of NPD Parts and file transfer to SQIG.
Analysis of Defects of BOP Parts reported from Assembly/Fabrication Line and
Warranty at Initial / Incoming Stage
Strong knowledge and skills of precision part measurements using profile projectors,
counter tracer and surface roughness tester, Hardness Tester, and CMM.
Have good knowledge about 5S, 7QC Tools, SPC, FMEA, PPAP, APQP and Quality
Circle.
Problem solving through why-why analysis, QC Tools, Quality circle etc.
Conducting line audit with control plan.
Acquired knowledge of supplier audits such as process audit and conduct MOM with
supplier.
Familiar with best practices in supplier quality management like supplier audit,
COPQ (cost of poor quality) and supplier scorecards.
Analysis of daily defects, calculation of supplier PPM and action upon it to reduce
process rejection.(Red bin activity)
To improve the Productivity by involving the workforce Quality Circle and initiating
KAIZEN
Achievements and Projects:-
My QC Team GOAL won GOLD award in QCFI competition and EXCLENT award in
NCQC Kolkata in Dec 2014.
Second prize in Quality champ Jan 2014.
QACM projects: -
YRA Hose Drain & YL-8 RR (completed)
YBA & YAD M-15 (Hose & Tube)
4. Instruments & Equipment’s Handled:-
Profile Projector, Counter tracer, Hardness tester (Rockwell, Brinell and
Shore), Roughness tester, Digital Vernier Calliper, Height Gauge,
Micrometre, slip Gauge, Radius Gauge, Push Pull Gauge.
Co-ordinate measuring machine (CMM) – Carl Zias
Co-ordinate measuring machine (CMM) – Welzel
Personal Dossier
Date of Birth : 25th Oct,1993
Relationship status : Unmarried
Industry type: Automotive/Auto Ancillary.
Area of experience: Supplier Quality Assurance.
Avocation: Reading inspirational Books and biography, Listening music.
Passport No. _ M6272880 (Valid till – Feb, 12 2025)
Current CTC – 4.2 LPA
Asp acted CTC – 6.0 LPA
Notice period – 2 Months