1. CURRICULUM VITAE
ADNAN NAZIM
Flat # F-10 Karson Complex
Gulshan-e-Iqbal Block-2
Near Moti Mahal Karachi.
Cell # 0092-333-3606065
E-Mail: adnannazim74@yahoo.com
CAREER OBJECTIVE:
To establish myself as a successful Engineer while working in a proactive and dynamic
organization with the mettle to lead the industry.
EXPERIENCE:
COMPANY : PIRANI ENGINEERING .PVT LTD.(Super Power Motorcycle).
DESIGNATION : Manager Quality Control.
Duration : 07 Jan 2013 to till date.
 To manage all the Quality functions in all Dep’t like (Sheet metal /CNC /Aluminum
Die Casting).
 To monitor in-process inspection through check sheets & introduce defect control
charts at stages wherever found necessary to minimize in-house rejections.
 Responsible for timely deliveries as per plan
 To enhance supplier quality through education of vendors on Quality Systems during
Visits.
 To Prepare Part Inspection Standards and Predelivery Inspection check sheets
 To investigate the quality trouble reports from Assy Line in assembly plant and
prepare Countermeasure sheets.
COMPANY : ALSONS AUTO PARTS PVT LTD.
DESIGNATION : Dy.Manager Quality Control
Duration : 2nd
Apr’2012 To Dec 30 th Dec’2012.
 To manage all the Quality functions from development of a new part .
 To monitor in-process inspection through check sheets & introduce defect control
charts at stages wherever found necessary to minimize in-house rejections.
 Responsible for timely deliveries as per plan
 To enhance supplier quality through education of vendors on Quality Systems during
Visits.
Page 1 of 4

2. COMPANY : Alpha Engineering Works Ltd.(Unit of BEWL) DYL Motorcycles Ltd.
DESIGNATION : Dy.Manager Production – MACHINING PLANT
Duration : 1st
July’2010 to 1ST
Apr ’2012
 Production planning & controlling
 Stream line all functions of m/c shop & eliminate all bottle-necks
 Implementation of production plan on Shop floor
 Improve efficiency and productivity of shop
 Responsible for timely deliveries as per plan
 Capacity improvement / Expansion plan of m/c shop
 Core team member for Specialized Projects
 Inter Deptts / Internal customers co-ordination
 Minimize machines idle time / break downs
Worked as a Dy.Manager Department Quality Division A.E.W.L-----July 2006 till 30th
June
2010
 To manage all the Quality functions from development of a new part (either of DYL
or OEMs like IMC or HACPL) to its final deletion.
 To manage all the Quality system documentations of customers as
IMC & HACPL.
 To monitor in-process inspection through check sheets & introduce defect control
charts at stages wherever found necessary to minimize in-house rejections.
 To minimize in-house machining rejections by managing Quality Control Circle
activities.
 To enhance supplier quality through education of vendors on Quality Systems during
Visits.
 To manage Frequent Out Plant Inspection requests on precise machines as CMM,
Roundness, Roughness Tester and Profile Projector.
 To investigate and solve machining complaints from customers like IMC & HACPL
besides main Customer DYL employing 7-QC tools.
 To maintain ISO certification and lead a team for achievement of
QS 9000/TS17969 quality system.
 Market complaints analysis and suggest their permanent countermeasures.
 Active member of Market Survey Campaigns.
 Core team member for Specialized Projects
Worked as Asst. Engineer (QD)--Incharge OEMs & Development --- July 2002 till June 2006.
 To manage all the inspection and development activities of OEMs.
 To investigate and solve complaints from customers like IMC & HACPL.
 To work on Supplier Quality Assurance Manual (SQAM) of IMC and Process Quality
Control Table (PQCT) of HACPL.
 To Prepare Part Inspection Standards and Predelivery Inspection check sheets of
DYL.
 Inspection on precise machines as CMM, Roundness or Roughness Tester.
Page 2 of 4

3.  To evaluate process capabilities CpK. for critical processes and monitor the process
trends.
 To evaluate N-3 sample parts and prepare their inspection reports.
 To evaluate N-30 Pilot lots.
 Calibrate and maintain various inspection tools as per schedule and comply ISO
9000 requirements.
 To ensure proper implementation of ISO 9000/5S activities at the Shop floor level.
 Market complaints analysis and suggest their permanent countermeasures.
 Active member of Market Survey Campaigns.
 Core team member for Specialized Projects
Technical Officer (QD) In-charge DYL Section-----July 1998 till July 2002
 To evaluate N-3 sample parts and prepare their inspection reports.
 To evaluate N-30 Pilot lots.
 To Prepare Part Inspection Standards and Pre-delivery Inspection check-sheets of
DYL.
 To investigate the quality trouble reports from DYL assembly plant and prepare
Countermeasure sheets.
 To inspect regular supplies and educate respective vendors about their deficiencies.
Ensure ISO 9000 implementation at Shop Floors
Sub Engineer (QD) July 1992 till June 1998
 To conduct line inspection as per Inspection standards and inform the operator /
supervisor regarding the quality of parts produced.
 Analyze and segregate daily rejection and account for Casting or machining
defects.
 Conduct final inspection as per Pre-delivery inspection standards.
 Actively participate in KAIZEN, Claim Zero Project (CZP) or QC-Circle activities.
 Maintain ISO and 5S activities at the shop floor level.
 Suggest ways to improve quality of product either through in-process alterations or
changes in Inspection techniques by introduction of new gauges.
EDUCATION:
EDUCATION SUMMARY YEARS DIVISION
Bachelors of Technology (Mechanical)
Newport Institute
2006 1st
Div.
Diploma of Associate Engineer (Mechanical)
Govt. Saifee Eide Zahabi Institute of Technology
2002 1st
Div.
Higher Secondary Certificate (Pre-Engineering)
Board of Intermediate Education, Karachi.
1991 Grade C
Secondary School Certificate (Science)
Board of Secondary Education, Karachi.
1989 Grade B
Page 3 of 4

4. PROFESSIONAL TRAINING’S:
 6 weeks Operation and Controls training for CNC Auto Programmable Co-Ordinate
Measuring Machine (C.M.M) at YAMAHA MOTOR COMPANY (YMC) SHIZUKA JAPAN.
 Initiation, Calibration & Maintenance – 1 Week
 Drawings reading and results calculation- 1 Week
 Manual measuring and logic building for specialized inspections-1 Week
 CMM check sheets preparation and result interpretation- 1 Week
 Auto programming for routine inspection jobs- 2 Weeks
IN-HOUSE TRAINGINGS:
 Attended in house training on ISO 9000 / 14000.
 Strategic Time Management at AEWL.
COMPUTER SKILLS:
Operating System : DOS, Windows' 95
Packages : MS Office 2000
PERSONAL:
Date of Birth : 12th Feb 1974
Nationality : Pakistani
Marital Status : Married
C.N.I.C No. : 42101-1393202-3
Page 4 of 4