Recommendation Letter
•
1 like•318 views
This letter provides a strong recommendation for Jason Fitzenberger from his professor, Dr. Robert Newberry. The professor notes that Jason successfully managed a fundraising event for the local food bank as part of a sports marketing class. He was also an active contributing member of a professional selling class. The professor states that Jason is a hard worker who completes what he starts and possesses good communication skills. Dr. Newberry strongly recommends Jason for any position and believes he will positively impact any organization.
Report
Share
Report
Share
Download to read offline
Recommended
Rolling contact Bearing 
Here you can find rolling contact bearing introduction. also fow to define life of bearing L10 or L50 and designation of rolling contact bearing.
Bearings classification by Er.A.Yokesh
Bearings are devices that allow rotational or linear movement between contacting surfaces while reducing friction and handling loads. There are two main types: rolling contact bearings, which use balls or rollers to transfer loads, and journal or sleeve bearings, which use a lubricating film. Key design considerations for selecting bearings include life, speed, space limitations, accuracy, and load type (radial, thrust, or both). Bearing catalogs provide load and life ratings to help selection.
Antifrcition bearings and lubrication.pptx
This document provides information about antifriction bearings and bearing lubrication. It discusses how rolling bearings use balls or rolling elements to minimize friction between bearing rings. It also describes how grease and oil are used as lubricants, with grease being preferred for applications where continuous oil supply is not possible. Grease provides lubrication, prevents corrosion and seals out dirt. The document discusses EHD lubrication principles for rolling bearings and explains how grease properties and NLGI grades are selected based on the application and operating conditions.
Net shape forging process
Net shape forging process means producing a component with exact shape and dimension in one blow with no flash and gutter. i.e no need for post forging operations and increases the production rate.
Pulley catalog-11-05-low
This document provides technical specifications and details for various pulley products, including:
1. An overview of Superior's product range including CEMA, mine duty, super duty, and Chevron wing pulleys in various duty classes.
2. Dimensions for XT and QD bushing systems used with pulleys.
3. Tables and figures with pulley specifications such as bushing locations, pulley assemblies, pulley classes, pulley drawings, torque values, weights, formulas, and other technical information.
The document serves as a reference guide for pulley specifications, components, and technical details. It includes specifications for different pulley types, duty classes, components, and formulas.
National bearing corporation
This ppt gives information about the national bearing corporation popularly Knows as NBC bearing one of the coveted name in bearing industries.
Fr a200
This document provides instructions for handling, installing, wiring, operating and maintaining an inverter. It discusses the inverter structure, removing covers, installing optional units, transportation, installation location, clearances, wiring diagrams, pre-operation checks, parameter settings, test runs, parameter unit functions and operation, maintenance, troubleshooting, optional accessories and specifications. Key points include proper handling to prevent damage, ambient temperature requirements, main and control circuit wiring, pre-operation checks and settings, monitoring and adjusting parameters, and protective functions.
Coupling and flange coupling and its design
This document describes a rigid flange coupling used to connect two shafts for transmitting power. A flange coupling consists of two cast iron flanges mounted and keyed on the ends of each shaft and bolted together. The design process involves calculating the shaft diameter based on the torque to be transmitted. Then selecting a coupling based on the shaft diameter. Checks are performed to ensure the bolt shear strength and bearing strength are sufficient based on allowable stresses. Dimensions of the selected coupling are drawn along with verification that the actual torque is less than the allowable torque for safe design.
Recommended
Rolling contact Bearing
Here you can find rolling contact bearing introduction. also fow to define life of bearing L10 or L50 and designation of rolling contact bearing.
Bearings classification by Er.A.Yokesh
Bearings are devices that allow rotational or linear movement between contacting surfaces while reducing friction and handling loads. There are two main types: rolling contact bearings, which use balls or rollers to transfer loads, and journal or sleeve bearings, which use a lubricating film. Key design considerations for selecting bearings include life, speed, space limitations, accuracy, and load type (radial, thrust, or both). Bearing catalogs provide load and life ratings to help selection.
Antifrcition bearings and lubrication.pptx
This document provides information about antifriction bearings and bearing lubrication. It discusses how rolling bearings use balls or rolling elements to minimize friction between bearing rings. It also describes how grease and oil are used as lubricants, with grease being preferred for applications where continuous oil supply is not possible. Grease provides lubrication, prevents corrosion and seals out dirt. The document discusses EHD lubrication principles for rolling bearings and explains how grease properties and NLGI grades are selected based on the application and operating conditions.
Net shape forging process
Net shape forging process means producing a component with exact shape and dimension in one blow with no flash and gutter. i.e no need for post forging operations and increases the production rate.
Pulley catalog-11-05-low
This document provides technical specifications and details for various pulley products, including:
1. An overview of Superior's product range including CEMA, mine duty, super duty, and Chevron wing pulleys in various duty classes.
2. Dimensions for XT and QD bushing systems used with pulleys.
3. Tables and figures with pulley specifications such as bushing locations, pulley assemblies, pulley classes, pulley drawings, torque values, weights, formulas, and other technical information.
The document serves as a reference guide for pulley specifications, components, and technical details. It includes specifications for different pulley types, duty classes, components, and formulas.
National bearing corporation
This ppt gives information about the national bearing corporation popularly Knows as NBC bearing one of the coveted name in bearing industries.
Fr a200
This document provides instructions for handling, installing, wiring, operating and maintaining an inverter. It discusses the inverter structure, removing covers, installing optional units, transportation, installation location, clearances, wiring diagrams, pre-operation checks, parameter settings, test runs, parameter unit functions and operation, maintenance, troubleshooting, optional accessories and specifications. Key points include proper handling to prevent damage, ambient temperature requirements, main and control circuit wiring, pre-operation checks and settings, monitoring and adjusting parameters, and protective functions.
Coupling and flange coupling and its design
This document describes a rigid flange coupling used to connect two shafts for transmitting power. A flange coupling consists of two cast iron flanges mounted and keyed on the ends of each shaft and bolted together. The design process involves calculating the shaft diameter based on the torque to be transmitted. Then selecting a coupling based on the shaft diameter. Checks are performed to ensure the bolt shear strength and bearing strength are sufficient based on allowable stresses. Dimensions of the selected coupling are drawn along with verification that the actual torque is less than the allowable torque for safe design.
Forging.pptx
The document discusses various types of forging processes including open die forging, impression die forging, and flashless forging. Open die forging involves compressing metal between flat dies, allowing lateral flow. Impression die forging uses dies with cavities to impart shapes, constraining flow. Flashless forging completely fills dies with no excess flash. Forging is used to make strong components for industries like automotive and aerospace. Equipment includes forging hammers that apply impact and presses that apply gradual pressure.
Mechanical fasteners
fasteners types....A nut is a type of hardware fasteners with a threaded hole.
Nuts are almost always used opposite a mating bolt to fasten a
stack of parts together.
The two partners are kept together by a combination of their
threads' friction, a slight stretch of the bolt, and compression
of the parts.
A washer is a thin plate typically disk-shaped with a hole that
is normally used to distribute the load of a threaded fastener.
THREAD TERMINOLOGY
EXTERNAL THREAD
-BOLT & SCREW
INTERNAL THREAD-NUTS,THREADED HOLE
THREAD TERMINOLOGY
RIGHT HAND THREAD
LEFT HAND THREAD
Bearing DESIGN
A bearing is a machine element that supports another moving element, known as a journal, and allows relative motion between their surfaces while carrying loads. There are two main types of bearings: sliding contact bearings and rolling contact bearings. Sliding contact bearings include journal or sleeve bearings, which support radial loads and come in full or partial designs. Rolling contact bearings use balls or rollers between surfaces to reduce friction. Key considerations in bearing design include load capacity, friction, lubrication, and heat dissipation.
Friction and lubrication (presentation)
This document discusses friction and lubrication in metal forming processes. It describes two models of friction - the Coulomb friction model which applies at normal stresses below the workpiece's flow stress, and the Tresca friction model at higher normal stresses. The key lubrication mechanisms are also outlined, including dry lubrication, hydrodynamic lubrication using high-speed fluid films, and boundary film lubrication preferred for sheet metal forming. Methods for measuring friction coefficients like the ring test and double cup extrusion test are also presented.
74384318 construye-tu-muneco-de-madera-kung-fu
Este documento proporciona instrucciones para construir un muñeco de madera utilizado en el entrenamiento de artes marciales. Explica que el muñeco de madera del estilo Choy Li Fut se diferencia de otros estilos en la posición de los brazos. Luego detalla los materiales necesarios, como madera de teca, haya o pino, e instrucciones para el cuerpo de 182 cm de altura y 20 cm de grosor que pese 100 kg, así como la colocación del brazo principal a 132 cm del suelo y los brazos medios y bajos
Braoching Operation
Broaching is a machining process that uses a broach tool to remove material. There are different types of broaches and broaching methods depending on the operation. Broaching provides high production rates and accuracy for machining holes, slots and surfaces. It is well-suited for mass production but requires expensive broach tools and fixtures.
Forging and casting technology
Forging is a process that shapes metal by applying pressure through hammers below the melting point. There are two main forging methods: closed die forging and cold die forging. Closed die forging provides high dimensional accuracy and the ability to create complex shapes in metals like steel, aluminum, and copper alloys. Cold die forging is done at room temperature up to a few hundred degrees Celsius and is used for lower alloy steels, stainless steel, aluminum, brass and bronze.
Casting involves using a pattern to create a cavity in a mold, which is then filled with liquid metal to produce the final product. Common metals cast include carbon and alloy steels, aluminum, and copper alloys.
Broching machine-manufacturing process-1
This document provides an overview of broaching machines and the broaching process. It discusses the basic principles of broaching, including that it removes material in layers using a cutter with gradually increasing cutting edges. It describes the construction of broaching tools, including their configuration, materials like HSS and cemented carbides, and cutting edge geometry. It also discusses different types of broaching like internal and external, pull and push broaches, and broaching machines like horizontal and vertical varieties.
GEAR BOX FUNDAMENTAL ASHUTOSH MOHANTY
The document discusses gear drive transmission systems. It begins with an introduction to gears, including their evolution and uses. It then covers fundamental gear concepts like gear tooth profiles, terminology, and the principles of conjugate action and transmission of motion via gearing. Specific gear tooth profiles are examined, with the involute curve identified as the most commonly used due to advantages like simplicity of manufacture and ability to maintain constant velocity ratio with variable center distances. The document provides explanations of key gearing concepts to understand their basic operation and design.
Jindal Panther TMT Bar
The document discusses Jindal Panther TMT rebar, which are thermo-mechanically treated steel bars that are stronger and more ductile than ordinary TMT bars due to more advanced manufacturing technology. They are suitable for earthquake-resistant structures. Shree Ji Steel Corporation offers Jindal Panther TMT bars in various sizes from 6mm to 40mm diameter at affordable prices for construction applications. The bars have a high tensile strength between 575-645 MPa and yield ratio above 1.12, making them strong yet flexible.
gear hobbing.pptx
Gear hobbing is a continuous gear generation process that is widely used for high or low volume production of external cylindrical gears. It involves rotating both a gear blank and a multi-point cutting tool called a hob at synchronized speeds so that the hob cuts the teeth into the gear blank. The gear blank is fed towards the rotating hob until the required depth is reached. Gear hobbing can produce spur gears, helical gears, worms, and worm wheels in a fast, economical process and is well-suited for batch production of a variety of gear types.
Cylindrical grinding
This presentation describes the cylindrical grinding process and types of operations and machines in this process, which is why useful topic B.Tech mechanical of fourth sem students. This explains about the overview on the external cylindrical grinding process.
Journal bearing
A journal bearing supports a rotating shaft by using an oil film between the shaft (journal) and the bearing. Oil is fed into the bearing through an inlet and dragged by the shaft into the converging gap, increasing fluid pressure and creating a hydrodynamic lift. Axial oil grooves provide space to prevent oil loss. Journal bearings handle high loads and speeds due to minimal metal contact from the oil film and provide smooth, quiet operation but require a large oil supply.
hydrodynamic journal bearing
This ppt gives a gerenal view of hydrodynamic bearing ,then there is a discussion of failure chances and few variations.
Drilling,broaching and grinding machines
Drilling, reaming, boring, and Tapping.broaching machines: broach construction – push, pull, surface and continuous broaching machines.grinding wheel – specifications and selection, types of grinding process–cylindrical grinding, surface grinding, centreless grinding and internal grinding
Induction - Rolling Mill Sheet Flatness control
Induction Work Roll Heating System - Flatness Control with Edge Heating System or Full Width Work Roll Heating for Flatness and Complex Profile Control
Tools use on lathe
The document discusses different types of tool bits used for machining, including their properties and applications. It describes how the shape and angles of tool bits are determined by factors like the operation, material, machine power, and desired finish. Various materials for tool bits are also outlined, such as high speed steel, carbides, and diamond, each suited for different machining conditions due to their hardness, strength, and temperature resistance. Tool holders are used to securely hold the bits at an angle to facilitate chip removal during cutting.
Cnc lathe ppt
The document provides information on operating and programming a CNC lathe. It includes warnings and cautions for safe operation, machine start and zero procedures, specifications for the machine, descriptions of common G-codes and M-codes used in programs, and examples of G71 and G72 stock removal cycles and a G75 grooving cycle. Safety is emphasized, with warnings to always wear protective equipment, properly clamp workpieces, and follow manufacturer guidelines. Programming and operation details are outlined to correctly home the machine, set work offsets, run simulations, and execute programs.
Metal rolling
Metal rolling is one of the most important metal forming processes. It involves plastically deforming metal between two rolls to reduce thickness and shape the metal. Most metals are hot rolled into basic shapes like blooms and slabs for further manufacturing. The rolls spin in opposite directions to feed and form the metal through compression. Friction must be controlled through lubrication. Rolling refines grain structure and spreads the width of the metal. Different roll materials, sizes, and mill configurations are used depending on the application. Surface defects can occur if scale or dirt are present while internal defects result from improper material distribution.
gear cutting_tools ( hobbing, seration , milling etc )
Hobs for spur gears are cylindrical cutting tools with cutting teeth used to cut gear teeth on workpieces. They are manufactured by relieving a worm-shaped blank to form cutting teeth, which can be done through relief turning or more precise relief grinding. The quality class of a hob determines the accuracy and quality of gears it can produce, with relief ground hobs achieving higher quality classes than relief turned hobs.
Recommendation from deidra colvin
Jason is recommended for a career in advertising, branding, and promotions. He impressed his marketing professor over three years with his class participation, challenging ideas, and leadership on group projects. As creative director for a class agency project, Jason exceeded client expectations by developing strategic plans and presentations. The professor believes Jason is well-suited for the advertising industry based on his drive, communication skills, and ability to work well independently and in a team.
Professional Letter of Recommendation
The letter recommends Austin Simundza for a position, noting that he is an excellent student with strong communication and leadership skills. As a student in Introduction to Marketing Management, Austin demonstrated an ability to understand theoretical concepts and apply knowledge to real business cases. He led a project team that conducted a thorough analysis of a local pizza restaurant's marketing strategies. Additionally, Austin has work experience in sports marketing and a passion for the business of sports. The letter writer believes Austin would be an asset for any organization due to his academic achievement, work ethic, and positive attitude.
More Related Content
What's hot
Forging.pptx
The document discusses various types of forging processes including open die forging, impression die forging, and flashless forging. Open die forging involves compressing metal between flat dies, allowing lateral flow. Impression die forging uses dies with cavities to impart shapes, constraining flow. Flashless forging completely fills dies with no excess flash. Forging is used to make strong components for industries like automotive and aerospace. Equipment includes forging hammers that apply impact and presses that apply gradual pressure.
Mechanical fasteners
fasteners types....A nut is a type of hardware fasteners with a threaded hole.
Nuts are almost always used opposite a mating bolt to fasten a
stack of parts together.
The two partners are kept together by a combination of their
threads' friction, a slight stretch of the bolt, and compression
of the parts.
A washer is a thin plate typically disk-shaped with a hole that
is normally used to distribute the load of a threaded fastener.
THREAD TERMINOLOGY
EXTERNAL THREAD
-BOLT & SCREW
INTERNAL THREAD-NUTS,THREADED HOLE
THREAD TERMINOLOGY
RIGHT HAND THREAD
LEFT HAND THREAD
Bearing DESIGN
A bearing is a machine element that supports another moving element, known as a journal, and allows relative motion between their surfaces while carrying loads. There are two main types of bearings: sliding contact bearings and rolling contact bearings. Sliding contact bearings include journal or sleeve bearings, which support radial loads and come in full or partial designs. Rolling contact bearings use balls or rollers between surfaces to reduce friction. Key considerations in bearing design include load capacity, friction, lubrication, and heat dissipation.
Friction and lubrication (presentation)
This document discusses friction and lubrication in metal forming processes. It describes two models of friction - the Coulomb friction model which applies at normal stresses below the workpiece's flow stress, and the Tresca friction model at higher normal stresses. The key lubrication mechanisms are also outlined, including dry lubrication, hydrodynamic lubrication using high-speed fluid films, and boundary film lubrication preferred for sheet metal forming. Methods for measuring friction coefficients like the ring test and double cup extrusion test are also presented.
74384318 construye-tu-muneco-de-madera-kung-fu
Este documento proporciona instrucciones para construir un muñeco de madera utilizado en el entrenamiento de artes marciales. Explica que el muñeco de madera del estilo Choy Li Fut se diferencia de otros estilos en la posición de los brazos. Luego detalla los materiales necesarios, como madera de teca, haya o pino, e instrucciones para el cuerpo de 182 cm de altura y 20 cm de grosor que pese 100 kg, así como la colocación del brazo principal a 132 cm del suelo y los brazos medios y bajos
Braoching Operation
Broaching is a machining process that uses a broach tool to remove material. There are different types of broaches and broaching methods depending on the operation. Broaching provides high production rates and accuracy for machining holes, slots and surfaces. It is well-suited for mass production but requires expensive broach tools and fixtures.
Forging and casting technology
Forging is a process that shapes metal by applying pressure through hammers below the melting point. There are two main forging methods: closed die forging and cold die forging. Closed die forging provides high dimensional accuracy and the ability to create complex shapes in metals like steel, aluminum, and copper alloys. Cold die forging is done at room temperature up to a few hundred degrees Celsius and is used for lower alloy steels, stainless steel, aluminum, brass and bronze.
Casting involves using a pattern to create a cavity in a mold, which is then filled with liquid metal to produce the final product. Common metals cast include carbon and alloy steels, aluminum, and copper alloys.
Broching machine-manufacturing process-1
This document provides an overview of broaching machines and the broaching process. It discusses the basic principles of broaching, including that it removes material in layers using a cutter with gradually increasing cutting edges. It describes the construction of broaching tools, including their configuration, materials like HSS and cemented carbides, and cutting edge geometry. It also discusses different types of broaching like internal and external, pull and push broaches, and broaching machines like horizontal and vertical varieties.
GEAR BOX FUNDAMENTAL ASHUTOSH MOHANTY
The document discusses gear drive transmission systems. It begins with an introduction to gears, including their evolution and uses. It then covers fundamental gear concepts like gear tooth profiles, terminology, and the principles of conjugate action and transmission of motion via gearing. Specific gear tooth profiles are examined, with the involute curve identified as the most commonly used due to advantages like simplicity of manufacture and ability to maintain constant velocity ratio with variable center distances. The document provides explanations of key gearing concepts to understand their basic operation and design.
Jindal Panther TMT Bar
The document discusses Jindal Panther TMT rebar, which are thermo-mechanically treated steel bars that are stronger and more ductile than ordinary TMT bars due to more advanced manufacturing technology. They are suitable for earthquake-resistant structures. Shree Ji Steel Corporation offers Jindal Panther TMT bars in various sizes from 6mm to 40mm diameter at affordable prices for construction applications. The bars have a high tensile strength between 575-645 MPa and yield ratio above 1.12, making them strong yet flexible.
gear hobbing.pptx
Gear hobbing is a continuous gear generation process that is widely used for high or low volume production of external cylindrical gears. It involves rotating both a gear blank and a multi-point cutting tool called a hob at synchronized speeds so that the hob cuts the teeth into the gear blank. The gear blank is fed towards the rotating hob until the required depth is reached. Gear hobbing can produce spur gears, helical gears, worms, and worm wheels in a fast, economical process and is well-suited for batch production of a variety of gear types.
Cylindrical grinding
This presentation describes the cylindrical grinding process and types of operations and machines in this process, which is why useful topic B.Tech mechanical of fourth sem students. This explains about the overview on the external cylindrical grinding process.
Journal bearing
A journal bearing supports a rotating shaft by using an oil film between the shaft (journal) and the bearing. Oil is fed into the bearing through an inlet and dragged by the shaft into the converging gap, increasing fluid pressure and creating a hydrodynamic lift. Axial oil grooves provide space to prevent oil loss. Journal bearings handle high loads and speeds due to minimal metal contact from the oil film and provide smooth, quiet operation but require a large oil supply.
hydrodynamic journal bearing
This ppt gives a gerenal view of hydrodynamic bearing ,then there is a discussion of failure chances and few variations.
Drilling,broaching and grinding machines
Drilling, reaming, boring, and Tapping.broaching machines: broach construction – push, pull, surface and continuous broaching machines.grinding wheel – specifications and selection, types of grinding process–cylindrical grinding, surface grinding, centreless grinding and internal grinding
Induction - Rolling Mill Sheet Flatness control
Induction Work Roll Heating System - Flatness Control with Edge Heating System or Full Width Work Roll Heating for Flatness and Complex Profile Control
Tools use on lathe
The document discusses different types of tool bits used for machining, including their properties and applications. It describes how the shape and angles of tool bits are determined by factors like the operation, material, machine power, and desired finish. Various materials for tool bits are also outlined, such as high speed steel, carbides, and diamond, each suited for different machining conditions due to their hardness, strength, and temperature resistance. Tool holders are used to securely hold the bits at an angle to facilitate chip removal during cutting.
Cnc lathe ppt
The document provides information on operating and programming a CNC lathe. It includes warnings and cautions for safe operation, machine start and zero procedures, specifications for the machine, descriptions of common G-codes and M-codes used in programs, and examples of G71 and G72 stock removal cycles and a G75 grooving cycle. Safety is emphasized, with warnings to always wear protective equipment, properly clamp workpieces, and follow manufacturer guidelines. Programming and operation details are outlined to correctly home the machine, set work offsets, run simulations, and execute programs.
Metal rolling
Metal rolling is one of the most important metal forming processes. It involves plastically deforming metal between two rolls to reduce thickness and shape the metal. Most metals are hot rolled into basic shapes like blooms and slabs for further manufacturing. The rolls spin in opposite directions to feed and form the metal through compression. Friction must be controlled through lubrication. Rolling refines grain structure and spreads the width of the metal. Different roll materials, sizes, and mill configurations are used depending on the application. Surface defects can occur if scale or dirt are present while internal defects result from improper material distribution.
gear cutting_tools ( hobbing, seration , milling etc )
Hobs for spur gears are cylindrical cutting tools with cutting teeth used to cut gear teeth on workpieces. They are manufactured by relieving a worm-shaped blank to form cutting teeth, which can be done through relief turning or more precise relief grinding. The quality class of a hob determines the accuracy and quality of gears it can produce, with relief ground hobs achieving higher quality classes than relief turned hobs.
What's hot (20)
gear cutting_tools ( hobbing, seration , milling etc )
gear cutting_tools ( hobbing, seration , milling etc )
Similar to Recommendation Letter
Recommendation from deidra colvin
Jason is recommended for a career in advertising, branding, and promotions. He impressed his marketing professor over three years with his class participation, challenging ideas, and leadership on group projects. As creative director for a class agency project, Jason exceeded client expectations by developing strategic plans and presentations. The professor believes Jason is well-suited for the advertising industry based on his drive, communication skills, and ability to work well independently and in a team.
Professional Letter of Recommendation
The letter recommends Austin Simundza for a position, noting that he is an excellent student with strong communication and leadership skills. As a student in Introduction to Marketing Management, Austin demonstrated an ability to understand theoretical concepts and apply knowledge to real business cases. He led a project team that conducted a thorough analysis of a local pizza restaurant's marketing strategies. Additionally, Austin has work experience in sports marketing and a passion for the business of sports. The letter writer believes Austin would be an asset for any organization due to his academic achievement, work ethic, and positive attitude.
Recommendation McKendrick, Jason
Jason is recommended for employment by his former supervisor. He is described as an action-oriented person who gets things done and motivates others. As an employee, Jason oversaw a fitness center renovation, improved communication and member relations, and developed new marketing strategies. He was also an active member of the national general manager operations group. His supervisor believes Jason would be a great asset to any organization due to his dedication and enthusiasm as both an individual and team player.
J. Castro Miami Zoo Reference Letter
Joseph Castro is being recommended for a senior marketing and development position. As Associate Director of Development and Events at the Zoological Society of Florida, Joseph helped secure unprecedented magazine and newspaper coverage that positively influenced fundraising results through creative marketing efforts and new fundraising programs. Joseph is described as a creative thinker with excellent communication and writing skills who conducted himself with integrity when working with donors, vendors, and colleagues.
LETTER OF RECOMMENDATION SHEILA P 2015
Sheila Pallas provides a strong recommendation for Joseph Fortier. She worked closely with Joseph for several years at the SGVTC where he demonstrated positive energy, professionalism, and commitment to supporting clients, staff, and stakeholders. As an effective leader, Joseph listens well, formulates solutions, and acts in a supportive manner. He also excels at teamwork and engaging others in a diverse group. Pallas gives Joseph her highest regard and recommends him for any position due to his professionalism, leadership abilities, and positive energy.
2015 Dr. Attaway ISU Letter of Rec
This letter recommends Justin Mayes for a career in sales and sales management. It describes him as hardworking, high-quality work, strong academic record, and high performer in sales courses. It details his experience representing his university in an international sales competition, where he received positive feedback and networked well. The author expresses confidence that Justin will make a positive contribution as an entry-level sales professional due to his strong interpersonal skills, easygoing nature, and drive to achieve goals and support others.
Master Resume
This document is a resume for Kyle Stanfield that provides his contact information, a brief summary of his qualifications, work experience, education, and references. Stanfield has over 15 years of experience in event management, marketing, public relations, and development. He is currently the Director of Development at the Oregon School Activities Association Foundation where he has increased revenues and community impact. His resume demonstrates a proven track record of achieving organizational goals through leadership, teamwork, and community involvement.
Happy Feet Character Reference
Jose has worked as a soccer coach for children aged 1.5 to 10 for over 4 years, gaining interest in sports for over 1,000 children. He has been promoted to Assistant Director of Coaching, overseeing league activities and training new coaches. Parents, children, and business partners all praise Jose as a role model in early childhood soccer due to his reliability, time management, representation of the company, and ability to gain children's interest while accomplishing much through initiative.
Letter of Reccomendation
Jason Stroub has worked with the author for 4 years on multiple projects. The author praises Jason's organizational abilities, strong work ethic, and professionalism which helped build business relationships and opportunities. The author also spent time with Jason and his family outside of work and sees how important his family is to him. The author highly recommends Jason for a teaching position and believes Jason's knowledge and professionalism will positively impact students looking to enter the field.
Gregory D. Silvermans Portfolio
This document serves as my Professional Portfolio. It includes the following; Biography, credentials, education, professional experience, personal & professional goals, personal values, community service and more! Please feel free view!
Rolfson letter
Tanya A. Rolfson, an assistant professor of mass communication, is recommending her former student Jason Fitzenberger for a position in sales, advertising, or marketing. She describes Mr. Fitzenberger as having strong work ethic, discipline, and a willingness to learn. He has taken several courses from Professor Rolfson including advertising design, copywriting, media, and campaigns. Professor Rolfson believes Mr. Fitzenberger has the skills and ability to achieve great things in marketing and sales industries, and would work hard to excel if hired. She offers to provide more details about his qualifications if contacted.
Foundfation Football 2019/20 school information
Foundation Football provides high-quality youth football development programs. It aims to empower children through sport by developing their skills, self-confidence, and social-emotional abilities. Founded in 2005 by Gus Cerro, a former professional footballer, it uses a unique curriculum focused on nurturing passion for the game from a young age through consistent coaching and an emphasis on life lessons like commitment and responsibility.
Pbe 3.0 final presentation 2011
This personal branding presentation summarizes Zach's activities and accomplishments from the past school year. It includes projects in various subjects, relationships built through playing football, and skills Zach plans to improve over the summer like weight lifting. Feedback from teachers and coaches commend Zach's leadership, work ethic, and potential. The presentation aims to showcase Zach's brand and growth over the past year in preparation for his future.
Overview of Qualifications PowerPoint
S. Jake Gibbs is a recent graduate seeking a career in marketing, advertising, or public relations. He has excellent communication skills and experience working in sports marketing and for the Kansas City Chiefs. His resume provides details on his education, skills, experience, references, and career aspirations to work in sports or athletic marketing roles.
CMST 201 Manager Paper
Dean Doug Blaze believes communication is critical for success at the University of Tennessee Law School. He emphasizes public speaking and writing skills. During an interview, Dean Blaze discussed how he communicates with faculty through emails, newsletters and meetings. He looks for oral and written communication skills in employees and focuses on writing skills for students. Dean Blaze works to create a collaborative environment and motivate faculty through recognition and honesty. Effective communication is key for students, faculty and the Dean at the University of Tennessee Law School.
Foundation football 2019 school information
Foundation Football is an academy committed to developing children through the sport of football. It aims to provide high quality coaching and help children develop important life skills like confidence, respect, and empowerment. The academy uses a detailed curriculum and methodology focused on character development through creative play and teamwork. It offers various programs for children ages 3-18, including skills training, elite programs, and school holiday camps. Parents are encouraged to enroll their children to help them achieve their football dreams through consistent, professional coaching and an empowering sports environment.
The power of the spoken word in forging ahead
The document discusses the power of spoken words to influence thoughts and actions. It states that voicing goals and dreams aloud can motivate people to achieve them, as it did for Muhammad Ali. It also notes that words can be used to encourage or discourage, so people should think carefully before speaking to ensure their words uplift others. Finally, it advises being a good listener at times to balance the power of speaking.
The power of the spoken word in forging ahead
The document discusses the power of spoken words to influence thoughts and actions. It states that voicing goals and dreams aloud can motivate people to achieve them, as it did for Muhammad Ali. It also notes that words can be used to encourage or discourage, so people should think carefully about what they say and try to use speech to build others up. Finally, it advises being a good listener at times rather than always speaking.
Recommendation from taylor bongard
Jason Wiese worked as a site director for a summer mission trip organization for three months. As site director, his responsibilities included managing staff and budgets, overseeing programming for over 100 students, and leading adult volunteers. He demonstrated strong leadership skills and kept consistent communication. Jason excelled at conveying the mission and purpose of the trips to participants. He remained calm during conflicts and was dedicated to supporting his team. The recommendation letter praises Jason for his positive attitude, big-hearted nature, and strengths in areas like communication, personal growth, and seeing the big picture.
IE Business School
Mihir developed a passion for basketball after witnessing NBA games in the US at age 13. Despite a 10 hour time difference, he made an effort to watch games before school and stayed late to observe his high school team's practice, which led to him making his school's basketball team. In this document, Mihir discusses how playing basketball contributed to his personal development through concentration, coordination, social skills, and innovation. It also aided his professional development through teamwork, resilience, strategic thinking, and coordination - skills that are valuable in his current career in finance. Basketball continues to be important to Mihir as he remains actively engaged in the sport through local tournaments.
Similar to Recommendation Letter (20)
Recommendation Letter
- 1. October 11, 2012 To Whom It May Concern: This is a recommendation for Jason Fitzenberger in support of his academic record and personal character as a student at Winona State University. Jason attended my Sports Marketing class last spring and contributed significantly to the learning experience including successfully managing a 3-on-3 hockey fundraising event as his project for the course. The event raised money and food donations for the local food bank. He also was enrolled in my Professional Selling class a year ago and was a very activate contributing member of that experience. Mr. Fitzenberger has demonstrated an ability to be prepared for lectures, discussions, and group presentations, and a positive influence on other students. Beyond school Jason has the personal characteristics to succeed professionally. He feels a personal obligation to do his fair share and more, and consequently, he will contribute positively to any work environment. In addition, he has specific career interests in sales and marketing, thus I believe he will perform exceptionally. Jason is what I would call a ‘finisher’, he completes what he starts. He also possesses very good communication skills. I strongly recommend Jason as the type of individual that will positively impact the performance of your organization. His past performance and personal character suggest a bright future. If you need additional information, please call me at 507-457-5621. Sincerely, Dr. Robert Newberry Professor Marketing Department Winona State University