Ramen Ball Sector Basis Weight Valve is an Electrically operated control valve with a high-precision control actuator for GSM / basis weight control application in Pulp & Paper Industry.

1. Ramén Ball Sector Valve
Electricallyoperatedcontrolvalvewithahigh-precisioncontrol
actuator for Ball Sector Valves.
Bunsenstrasse 38 85053 Ingolstadt
Tel: (0841) 9654-0 Fax: (0841) 9654-590
www.schubert-salzer.com, info.cs@schubert-salzer.com
Technical Information Valve
with high exact valve actuator
• 1000-8192 measured steps (at the spherical sector ) for the
90° pivoting
• no inverse hysteresis
• Developed to use as a basis weight valve
• Driving torque: 200 Nm
• Stroking time from 2 seconds up to 5 minutes for 90°
• Input signal with step signal or analogue 4-20mA
• Feedback with analogues signal 4-20 mA
• Controlling in a compact control cabinet
• Class of protection IP65
• Energency manual operation
• Uneffected by contaminated media
• Seat ring facile convertible
4032
Body design flangeless, wafer-type construction
Nominal size DN 80 up to DN 200
Nominal pressure up to PN 25 acc. DIN 2401, depending on the
nominal size for flanges PN 10 - PN 40
Media temperature O-rings VITON -10°C up to +170°C
Ambient temperature -10°C up to +60°C
Leackage with PTFE-seat Leckrate 2 acc. DIN 3230-BO
with metal seat < 0,01 % of Kvs - value
further details see sealing materials
Technical Information Actuator
analog step / direction bus system
Set point signal 4 - 20 mA 24V, 400 Hz max. CAN / Profibus
Burden 470 Ohm 1500 Ohm
Supply energy, electrical
Actuator
Resolution at the spherical sector 8192 steps / 90° 8 192 steps / 90° in preparation
Turning angle detection
Adjusting range
Stroking time (max.) ca. 2 s up to 5 min. max. 400 Hz ca. 2 s up to 5 min.
Feed back
Adaptation
Configuration
Ambient temperature limit, actuator
Ambient temperature limit, control cabinet
Limit stops
Protection class acc. DIN 40050
control sxstem; no mechanical strokes
IP 65
servo motor with planetary gear
15 Bit absolute turning angle transmitter Drehwinkelgeber
4 - 20 mA (max. 10 bit), load resistor: 1k max.
factory provided
with PC-Software
0°C bis +40°C
100...230 VAC [±10%], 50-60 Hz [±10%]
0 - 90°
Activation
-10°C bis +60°C

2. Materials
Valve sizes, Kvs-values
Differential pressure
Material Combination MAK 1 MAK 1A MAK 1B MAK 1C MAK 1E
Body 1.4408* 1.4408* 1.4408* 1.4408* 1.4408*
Ball Sector 1.4408*
1.4408
hard-chrome plated
1.4408
hard-chrome plated
1.4408
hard-chrome plated
1.4408
hard-chrome plated
Fixing Ring (For Seat Ring) 1.4436 or 1.4408 1.4436 or 1.4409 1.4436 o r1.4410
1.4436 or 1.4411
hard-chrome plated
1.4436 or 1.4411
hard-chrome plated
Bearing Shaft 1.4460* 1.4460 1.4460 1.4460 1.4460
Bearings Rulon Rulon Rulon Rulon Rulon
Seat Ring PTFE PTFE
1.4436
stellited
1.4436
stellited
1.4436
stellited, extended
O-Rings VITON VITON VITON VITON VITON
O-Ring Sealings For
Bearing Shafts
maintenance-free maintenance-free maintenance-free maintenance-free maintenance-free
DN Kvs Orifice Dia. Rotation Angle max.
mm nominal (3) Pressure Number
Typ KS
80 255 64 90° PN25
100 390 80 90° PN25
150 810 120 90° PN16
200 1365 155 90° PN16
Nominal Max. working
size pressure
body seat ring PTFE seat ring W1.4436 hard faced
DN 0-170°C 0-80°C 120°C 150°C 0-80°C 170°(200°) C
bar bar bar bar bar bar
80-100 25 16 6 1 16 16
150-200 16 16 6 1 16 12
max. differential pressure
Ramén-BallSector Valve 4032
with high-precision valve - actuator

3. Dimensions
Datasheet 4032e/Version:23.04.2010
Textandpicturesarenotbinding.Wereservetheright,toaltertheequipment.
OG
F
E
OB
OA
C2H2
H1
132mm
5,2"
100mm
4"
C1
Ramén-BallSector Valve 4032
with high-precision valve - actuator
DN Ø A Ø B C1 C2 E F Ø G H1 H2
80 80 64 97 177 95 55 140 104 589
100 100 80 108 188 112 62 160 115 600
150 150 120 157 237 170 95 220 162 647
200 200 155 187 267 210 120 274 183 668
Dimensions in mm