Installation guide for the Rain Director rainwater harvesting system. For more infomation or a high resolution download please see http://www.rainwaterharvesting.co.uk/rain-director-rainwater-management-system-01.php
1) The document provides installation instructions for the RD01 Rain Director control unit and smart header tank. It includes what components are included and diagrams of the plumbing and wiring setup.
2) Key steps include connecting the rainwater, mains water, and refresh pipes to the control unit and header tank. The header tank must be installed above the control unit.
3) The document also provides troubleshooting tips for common issues like lights flashing on the control unit.
This document provides installation and operation instructions for Autotrol Logix 764 control valves and Performa CV series water softening valves. It includes sections on safety, location selection, equipment installation, control and valve features, system specifications, programming options, service/maintenance, troubleshooting, and wiring/assembly diagrams. The document is intended to guide installers on setting up water softening systems using these Autotrol components.
This document summarizes several detacher systems - DeMax and DemaTron - for milking parlors. The detachers come in various models with different features ranging from basic flow sensing to more advanced options with milk meters and cow identification displays. Key features include robust construction, central control panels, automatic milking/washing modes, and integration with herd management software. The detachers are designed for reliability and minimal maintenance in dairy farm environments.
Water conservation is easier than most people think. This presentation focuses on proven real-world examples of how to conserve energy at home or at work.
The presentation was followed by a workshop (see http://mi-group.ca/premise/water-conservation-workshop/). Contact us for more information about custom training workshops.
This document discusses a proposal for greywater reuse on Duke University's campus. It would involve collecting greywater from residential housing sources like sinks, showers, and washing machines. The greywater would undergo treatment including bar screening, microfiltration, and UV disinfection. The treated greywater would then be used to irrigate golf courses and highway medians on campus in accordance with North Carolina regulations. The system has the potential benefits of conserving water and providing a learning opportunity for students while meeting regulatory requirements for greywater reuse.
Non-potable water for use in irrigation systemsChuck Bowen
The document discusses various alternative non-potable water sources that can be used for irrigation systems instead of potable water due to increasing water scarcity and regulation. It describes different sources like recycled water, rainwater, graywater, stormwater, cooling tower blowdown, and desalination. For each source, it covers technical considerations like water quality, collection methods, storage, regulations, costs, and which design professionals would be involved. The conclusion is that there are many viable alternatives to potable water for irrigation, but each source's benefits vary and costs, return on investment, health, and maintenance needs to be evaluated for the specific project.
This document provides instructions for a multi-functional flow control valve for water treatment systems. It includes:
1. An overview of the valve's applications, characteristics, service conditions, dimensions, and installation instructions.
2. Details on basic settings and usage, including the functions of the control board.
3. Information on applications and system configurations, parameter settings, troubleshooting, and assembly parts.
4. The document instructs users to read it fully before installation and operation of the valve. It provides technical specifications and notices for proper use of the valve in water treatment systems.
1) The document provides installation instructions for the RD01 Rain Director control unit and smart header tank. It includes what components are included and diagrams of the plumbing and wiring setup.
2) Key steps include connecting the rainwater, mains water, and refresh pipes to the control unit and header tank. The header tank must be installed above the control unit.
3) The document also provides troubleshooting tips for common issues like lights flashing on the control unit.
This document provides installation and operation instructions for Autotrol Logix 764 control valves and Performa CV series water softening valves. It includes sections on safety, location selection, equipment installation, control and valve features, system specifications, programming options, service/maintenance, troubleshooting, and wiring/assembly diagrams. The document is intended to guide installers on setting up water softening systems using these Autotrol components.
This document summarizes several detacher systems - DeMax and DemaTron - for milking parlors. The detachers come in various models with different features ranging from basic flow sensing to more advanced options with milk meters and cow identification displays. Key features include robust construction, central control panels, automatic milking/washing modes, and integration with herd management software. The detachers are designed for reliability and minimal maintenance in dairy farm environments.
Water conservation is easier than most people think. This presentation focuses on proven real-world examples of how to conserve energy at home or at work.
The presentation was followed by a workshop (see http://mi-group.ca/premise/water-conservation-workshop/). Contact us for more information about custom training workshops.
This document discusses a proposal for greywater reuse on Duke University's campus. It would involve collecting greywater from residential housing sources like sinks, showers, and washing machines. The greywater would undergo treatment including bar screening, microfiltration, and UV disinfection. The treated greywater would then be used to irrigate golf courses and highway medians on campus in accordance with North Carolina regulations. The system has the potential benefits of conserving water and providing a learning opportunity for students while meeting regulatory requirements for greywater reuse.
Non-potable water for use in irrigation systemsChuck Bowen
The document discusses various alternative non-potable water sources that can be used for irrigation systems instead of potable water due to increasing water scarcity and regulation. It describes different sources like recycled water, rainwater, graywater, stormwater, cooling tower blowdown, and desalination. For each source, it covers technical considerations like water quality, collection methods, storage, regulations, costs, and which design professionals would be involved. The conclusion is that there are many viable alternatives to potable water for irrigation, but each source's benefits vary and costs, return on investment, health, and maintenance needs to be evaluated for the specific project.
This document provides instructions for a multi-functional flow control valve for water treatment systems. It includes:
1. An overview of the valve's applications, characteristics, service conditions, dimensions, and installation instructions.
2. Details on basic settings and usage, including the functions of the control board.
3. Information on applications and system configurations, parameter settings, troubleshooting, and assembly parts.
4. The document instructs users to read it fully before installation and operation of the valve. It provides technical specifications and notices for proper use of the valve in water treatment systems.
1. The Rain Director system harvests rainwater from the roof into an underground storage tank and pumps it into a header tank in the attic when needed.
2. It has sensors to switch between rainwater and mains water and automatically refreshes the header tank every 3 days if unused.
3. The system uses little energy and provides reliable water in all situations including power outages or pump failures.
S&A CW-3000 series thermolysis type water cooler has compact design,with energy saving,high cost performance,good protection and alarm system. It’s mainly used on the equipment for heat exchange between the heat and the air environment. The water temperature of cw-3000 cooler is related to ambient temperature, so it's thermostat is not manually adjusted.
Features:
1. Radiating capacity: 50W / ℃;
2. Small thermolysis water cooler, energy saving, long working life and simple operation;
3. With completed water flow and over high temperature alarm functions;
4. Multiple power specifications; CE approval; RoHS approval;
The intelligent mains water management system uses an automatic switchover to mains water if the storage tank gets low, providing failsafe backup during power outages or pump failures. It has low energy consumption and less wear on components. The Rain Director system works by pumping rainwater from an underground tank to a header tank, then using gravity to feed it to toilets and washing machines until low levels trigger switching to mains water. It saves energy by running the pump only when needed and can refresh stored water every 3 days when unoccupied to maintain quality.
Andel-PPL BundGuard Automatic Oil & Water Separating Pump System - Spec SheetThorne & Derrick UK
The Andel-PPL BundGuard is an automatic pump system that was developed to remove rainwater from oil storage containment areas. It uses advanced technology to discriminate between oil and water, pumping out only water to prevent the containment capacity from dropping below the level needed to contain oil in the event of a spill. The system works continuously to monitor liquid levels and remove water safely without human intervention. Its use eliminates the need for regular emptying of containment areas by contractors, reducing costs and environmental impact.
The document is an instruction manual for a vacuum loader PCB handling machine. It provides details on:
1) Preparation before use including leveling, gas source, power supply, and installation location requirements.
2) Technical specifications of the machine including dimensions, weight, power requirements, and control modes.
3) Introduction to functions including the main interface, track width adjustment, suction plate manual control, and password setting.
4) Parameter settings, I/O interfaces, circuit diagrams, troubleshooting, operation flow, status light descriptions, precautions, and weekly maintenance checklist.
The document describes a smart water valve that is designed to prevent water damage from issues like leaks or continuously running toilets. It works by learning the normal fill time for an appliance, like a toilet, and shutting off the water if it detects flow for longer than expected. The valve uses magnetic sensing of water flow and patented latching technology to operate reliably. It is aimed at helping to reduce unintended water loss and damage in homes and businesses.
This document is a user guide for the LNP95 Liquid Nitrogen Pump Cooling System made by Linkam Scientific Instruments Ltd. It provides instructions on setting up the system, making connections to the liquid nitrogen dewar and temperature controller, and operating the pump. Safety information and technical specifications for the LNP95 are also included.
- The document provides information on using a standby valve with an Isoprime mass spectrometer, including setup instructions, operating procedures, and maintenance tips.
- The standby valve allows switching between a sample analysis mode and standby mode without interrupting helium flow to the mass spectrometer.
- Proper installation and leak checking of connections is important for safe operation of the standby valve system.
This document provides assembly instructions for a FodderPro 3.0 Commercial Feed System. It includes a bill of materials and identifies the required tools. The assembly process involves separating frame components according to part numbers and lengths. Frame sections are assembled in order, beginning with the 35-tray pod frame and then four 28-tray pod frames. Each pod frame involves assembling the front, back, and center sections using bolts, washers, and inserts to join the frame tubes. Safety precautions and leveling of the assembled frames are also described. Electrical and plumbing connections to the main water supply are outlined.
The document describes the G.R.I. Water Valve Shutoff System, which automatically shuts off the main water supply line when water is detected by sensors. The system includes an electronic controller that monitors multiple water sensors, controls an electronic water valve, and provides status indicators. When water is detected, the controller closes the valve and triggers an alarm. It can cover a large area when used with multiple sensors and has self-testing features to monitor operation.
50 Tips for Saving Energy_refrigeration_web_r2Doug Anderson
This document provides 50 low- and no-cost tips for improving the energy efficiency of industrial refrigeration systems through optimizing operations and maintenance. As the largest energy consumers, refrigeration systems should be a major target for savings. The tips are organized into sections on evaporator opportunities, compressor opportunities, evaporative condenser opportunities, and more. Implementing the tips can help reduce energy costs with little to no capital investment through activities like cleaning coils, adjusting pressure regulators, solving compressor issues, and ensuring proper condenser operations. Safety precautions are recommended, as improper implementation could cause harm.
The Rain Backup in a Box automatically provides mains water to supplement a rainwater harvesting system when the rainwater runs low. It uses a float switch or level sensor to detect when the tank's water level is critically low, at which point it opens a solenoid valve to allow a measured amount of mains water into the tank, ensuring appliances are never without water. The system is simple to install and use, and replaces multiple components with a single easy-to-use unit.
Colorado Water Purification US Water Fusion Backwashing Filter Manual 1110 8 14Water Works
Water Works is one of the largest providers of water treatment solutions in Colorado. Our experts repair, replace, and custom design solutions that are affordable for you. Our services include but are not limited to water filtration, water purification, reverse osmosis, water softening, ozone treatment, aeration, disinfection, chlorination, and chloramine removal. Contact us for a free water analysis! Visit us at: https://coloradowaterpurification.com/water-purification-water-softener-installation-in-colorado-springs/
This document provides installation and service instructions for Parker pneumatic valves. It includes:
- Port identification diagrams for normally open and normally closed valve configurations
- Procedures for disassembling and servicing the valves
- Part identification lists and specifications
- Application limits and operating instructions
- Troubleshooting tips for common issues like air leaks and noisy solenoids
- Safety warnings for working with compressed air systems
PRESENTATION ON SURGE ANTICIPATION VALVE.pptxholegajendra
Water hammer occurs when the flow of a fluid in a pipe is suddenly stopped, creating a pressure wave. This can damage plumbing joints, valves, and pipes. A surge anticipation valve (SAV) automatically opens when pump flow stops to relieve pressure. It has a double pitot valve that can sense pressure changes and opens quickly to maintain line pressure before closing slowly. Proper SAV installation, maintenance, and design requires information like flow rates, pressures, and water quality. SAVs can be installed above or below ground with different advantages and disadvantages for each.
This document provides installation, operation and safety instructions for a MWHE series washer-extractor. Section 1 covers important safety information, including checking electrical and plumbing connections and verifying proper operation of the door safety interlock. Safe operating environment is also addressed, noting temperature, humidity, ventilation and other factors. Section 2 lists technical specifications and component identification, while subsequent sections cover installation, operation, maintenance, troubleshooting and parts.
This document provides a user's guide for the PlateRunner P24 plate processor. It describes the installation requirements, how to turn the processor on and start up, and how to access and set parameters through the control panel for pre-heat temperature and timing, developer temperature and replenishment, gum dryer settings, and processing speed. It also covers basic maintenance procedures.
A simple guide for self builders wanting to carry out a percolation test. Find if a soakaway is suitable for your development (and) receive a recommendation on size.
Rain Activ- the SuDS add Rainwater Harvesting system. Providing ultra low rates of storm water discharge. Avalible for above or below ground installations.
More Related Content
Similar to Rain Director installation low quality.
1. The Rain Director system harvests rainwater from the roof into an underground storage tank and pumps it into a header tank in the attic when needed.
2. It has sensors to switch between rainwater and mains water and automatically refreshes the header tank every 3 days if unused.
3. The system uses little energy and provides reliable water in all situations including power outages or pump failures.
S&A CW-3000 series thermolysis type water cooler has compact design,with energy saving,high cost performance,good protection and alarm system. It’s mainly used on the equipment for heat exchange between the heat and the air environment. The water temperature of cw-3000 cooler is related to ambient temperature, so it's thermostat is not manually adjusted.
Features:
1. Radiating capacity: 50W / ℃;
2. Small thermolysis water cooler, energy saving, long working life and simple operation;
3. With completed water flow and over high temperature alarm functions;
4. Multiple power specifications; CE approval; RoHS approval;
The intelligent mains water management system uses an automatic switchover to mains water if the storage tank gets low, providing failsafe backup during power outages or pump failures. It has low energy consumption and less wear on components. The Rain Director system works by pumping rainwater from an underground tank to a header tank, then using gravity to feed it to toilets and washing machines until low levels trigger switching to mains water. It saves energy by running the pump only when needed and can refresh stored water every 3 days when unoccupied to maintain quality.
Andel-PPL BundGuard Automatic Oil & Water Separating Pump System - Spec SheetThorne & Derrick UK
The Andel-PPL BundGuard is an automatic pump system that was developed to remove rainwater from oil storage containment areas. It uses advanced technology to discriminate between oil and water, pumping out only water to prevent the containment capacity from dropping below the level needed to contain oil in the event of a spill. The system works continuously to monitor liquid levels and remove water safely without human intervention. Its use eliminates the need for regular emptying of containment areas by contractors, reducing costs and environmental impact.
The document is an instruction manual for a vacuum loader PCB handling machine. It provides details on:
1) Preparation before use including leveling, gas source, power supply, and installation location requirements.
2) Technical specifications of the machine including dimensions, weight, power requirements, and control modes.
3) Introduction to functions including the main interface, track width adjustment, suction plate manual control, and password setting.
4) Parameter settings, I/O interfaces, circuit diagrams, troubleshooting, operation flow, status light descriptions, precautions, and weekly maintenance checklist.
The document describes a smart water valve that is designed to prevent water damage from issues like leaks or continuously running toilets. It works by learning the normal fill time for an appliance, like a toilet, and shutting off the water if it detects flow for longer than expected. The valve uses magnetic sensing of water flow and patented latching technology to operate reliably. It is aimed at helping to reduce unintended water loss and damage in homes and businesses.
This document is a user guide for the LNP95 Liquid Nitrogen Pump Cooling System made by Linkam Scientific Instruments Ltd. It provides instructions on setting up the system, making connections to the liquid nitrogen dewar and temperature controller, and operating the pump. Safety information and technical specifications for the LNP95 are also included.
- The document provides information on using a standby valve with an Isoprime mass spectrometer, including setup instructions, operating procedures, and maintenance tips.
- The standby valve allows switching between a sample analysis mode and standby mode without interrupting helium flow to the mass spectrometer.
- Proper installation and leak checking of connections is important for safe operation of the standby valve system.
This document provides assembly instructions for a FodderPro 3.0 Commercial Feed System. It includes a bill of materials and identifies the required tools. The assembly process involves separating frame components according to part numbers and lengths. Frame sections are assembled in order, beginning with the 35-tray pod frame and then four 28-tray pod frames. Each pod frame involves assembling the front, back, and center sections using bolts, washers, and inserts to join the frame tubes. Safety precautions and leveling of the assembled frames are also described. Electrical and plumbing connections to the main water supply are outlined.
The document describes the G.R.I. Water Valve Shutoff System, which automatically shuts off the main water supply line when water is detected by sensors. The system includes an electronic controller that monitors multiple water sensors, controls an electronic water valve, and provides status indicators. When water is detected, the controller closes the valve and triggers an alarm. It can cover a large area when used with multiple sensors and has self-testing features to monitor operation.
50 Tips for Saving Energy_refrigeration_web_r2Doug Anderson
This document provides 50 low- and no-cost tips for improving the energy efficiency of industrial refrigeration systems through optimizing operations and maintenance. As the largest energy consumers, refrigeration systems should be a major target for savings. The tips are organized into sections on evaporator opportunities, compressor opportunities, evaporative condenser opportunities, and more. Implementing the tips can help reduce energy costs with little to no capital investment through activities like cleaning coils, adjusting pressure regulators, solving compressor issues, and ensuring proper condenser operations. Safety precautions are recommended, as improper implementation could cause harm.
The Rain Backup in a Box automatically provides mains water to supplement a rainwater harvesting system when the rainwater runs low. It uses a float switch or level sensor to detect when the tank's water level is critically low, at which point it opens a solenoid valve to allow a measured amount of mains water into the tank, ensuring appliances are never without water. The system is simple to install and use, and replaces multiple components with a single easy-to-use unit.
Colorado Water Purification US Water Fusion Backwashing Filter Manual 1110 8 14Water Works
Water Works is one of the largest providers of water treatment solutions in Colorado. Our experts repair, replace, and custom design solutions that are affordable for you. Our services include but are not limited to water filtration, water purification, reverse osmosis, water softening, ozone treatment, aeration, disinfection, chlorination, and chloramine removal. Contact us for a free water analysis! Visit us at: https://coloradowaterpurification.com/water-purification-water-softener-installation-in-colorado-springs/
This document provides installation and service instructions for Parker pneumatic valves. It includes:
- Port identification diagrams for normally open and normally closed valve configurations
- Procedures for disassembling and servicing the valves
- Part identification lists and specifications
- Application limits and operating instructions
- Troubleshooting tips for common issues like air leaks and noisy solenoids
- Safety warnings for working with compressed air systems
PRESENTATION ON SURGE ANTICIPATION VALVE.pptxholegajendra
Water hammer occurs when the flow of a fluid in a pipe is suddenly stopped, creating a pressure wave. This can damage plumbing joints, valves, and pipes. A surge anticipation valve (SAV) automatically opens when pump flow stops to relieve pressure. It has a double pitot valve that can sense pressure changes and opens quickly to maintain line pressure before closing slowly. Proper SAV installation, maintenance, and design requires information like flow rates, pressures, and water quality. SAVs can be installed above or below ground with different advantages and disadvantages for each.
This document provides installation, operation and safety instructions for a MWHE series washer-extractor. Section 1 covers important safety information, including checking electrical and plumbing connections and verifying proper operation of the door safety interlock. Safe operating environment is also addressed, noting temperature, humidity, ventilation and other factors. Section 2 lists technical specifications and component identification, while subsequent sections cover installation, operation, maintenance, troubleshooting and parts.
This document provides a user's guide for the PlateRunner P24 plate processor. It describes the installation requirements, how to turn the processor on and start up, and how to access and set parameters through the control panel for pre-heat temperature and timing, developer temperature and replenishment, gum dryer settings, and processing speed. It also covers basic maintenance procedures.
Similar to Rain Director installation low quality. (20)
A simple guide for self builders wanting to carry out a percolation test. Find if a soakaway is suitable for your development (and) receive a recommendation on size.
Rain Activ- the SuDS add Rainwater Harvesting system. Providing ultra low rates of storm water discharge. Avalible for above or below ground installations.
The document describes a plug-and-play mains water backup unit for direct feed rainwater harvesting systems. It allows mains water to flow into the rainwater storage tank when the tank is empty, via a float switch and electrically activated solenoid. When the float rises as the tank fills, the solenoid shuts off the mains water flow. This ensures water is available from the tank during periods of low rainfall without fully filling the tank each time.
The document describes a plug-and-play mains water backup unit for direct feed rainwater harvesting systems. It contains a submersible pump, float switch, and solenoid valve that allows mains water to flow into the storage tank when rainfall is low. The float switch detects when the tank is empty and signals the solenoid valve to open, allowing mains water to partially fill the tank while leaving space for captured rainfall. Installation instructions are provided for connecting the unit's water inlets and outlets, float switch, and power supply.
Rainwater harvesting ltd international distributor pack npRainwaterharvesting
Rainwater Harvesting Ltd is a leading UK manufacturer and supplier of rainwater harvesting equipment operating from a 60,000 square foot facility in Peterborough, England. They manufacture products like the Rain Director, an innovative low energy header tank system, and the Backup in a Box, a mains top-up device. In addition to domestic supply, they also supply full systems and provide technical support to end users and trade partners. Their products are engineered and manufactured in-house to be of high quality and differentiated in the industry.
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challengesHolger Mueller
Holger Mueller of Constellation Research shares his key takeaways from SAP's Sapphire confernece, held in Orlando, June 3rd till 5th 2024, in the Orange Convention Center.
The Genesis of BriansClub.cm Famous Dark WEb PlatformSabaaSudozai
BriansClub.cm, a famous platform on the dark web, has become one of the most infamous carding marketplaces, specializing in the sale of stolen credit card data.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Digital Marketing with a Focus on Sustainabilitysssourabhsharma
Digital Marketing best practices including influencer marketing, content creators, and omnichannel marketing for Sustainable Brands at the Sustainable Cosmetics Summit 2024 in New York
How MJ Global Leads the Packaging Industry.pdfMJ Global
MJ Global's success in staying ahead of the curve in the packaging industry is a testament to its dedication to innovation, sustainability, and customer-centricity. By embracing technological advancements, leading in eco-friendly solutions, collaborating with industry leaders, and adapting to evolving consumer preferences, MJ Global continues to set new standards in the packaging sector.
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
3 Simple Steps To Buy Verified Payoneer Account In 2024SEOSMMEARTH
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...Neil Horowitz
On episode 272 of the Digital and Social Media Sports Podcast, Neil chatted with Brian Fitzsimmons, Director of Licensing and Business Development for Barstool Sports.
What follows is a collection of snippets from the podcast. To hear the full interview and more, check out the podcast on all podcast platforms and at www.dsmsports.net
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...APCO
The Radar reflects input from APCO’s teams located around the world. It distils a host of interconnected events and trends into insights to inform operational and strategic decisions. Issues covered in this edition include:
The 10 Most Influential Leaders Guiding Corporate Evolution, 2024.pdfthesiliconleaders
In the recent edition, The 10 Most Influential Leaders Guiding Corporate Evolution, 2024, The Silicon Leaders magazine gladly features Dejan Štancer, President of the Global Chamber of Business Leaders (GCBL), along with other leaders.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.AnnySerafinaLove
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
1. I N S T A L L A T I O N M A N U A L RD01
1
WHAT’S IN THE BOX
(Inline filter not required in shallow dig tanks)
1
Rain Director® control unit with mode indicators, programming buttons and
control valves and 230 V AC to 12 V wall adapter. The control unit measures
380mm W x 270mm H x 95mm D.
2
Cat 5 cable to connect junction box on header tank to underside of control unit.
Do Not Cut!
3
Smart header tank for roof space, including level sensors, float switch, Cat 5
connection box and overflow tower. The 100 litre tank measures 600mm W x
490mm H x 500mm D.
4
Flow reducing valves (in plastic pack) for use in Torbeck float valve if mains
pressure is too great.
5
Mains electric submersible pump (must be pressure-sensitive and equipped
with non-return valve).
1
2
3
4
5