With a wide range of applications varying from white goods, automotive, and aerospace applications, sheet metals are often high in strength relative to their cross section area. It’s important to note that formability and ductility is also crucial, for which the common testing requirements are similar across applications. Explore the challenges in sheet metal testing.
Determination of Range of Splash of Testing Fluid during Hydro Testing of Kni...ijtsrd
There are certain trivial experimental findings which may not have a major significance but their execution is considered to be of such a nature as to complete the study in the specified area. Likewise in the field of hydro testing of valves and flow equipment, there is a basic requirement of operation of the same under influence of applied hydro pressure. This is required to determine the performance parameters like the thrust and the torque required to operate the equipment. While doing so, in addition to the qualitative requirements, an additional requirement of space has to be considered to ensure the surrounding area is not affected due to splashes of the testing fluid while under pressure. This paper shall consider such a case for hydro testing of a knife gate valve. At a given pressure, when the door or gate of the valve is initiated to open, there is an initial splash of testing fluid which ejects out of the orifice created due to the opening. The horizontal range of this splash shall be mathematically determined. An experimental finding shall then be presented to confirm the derived formulae. A conclusion shall be drawn thereafter dictating the percentage error and the employability of the derived formulae. Gourav Vivek Kulkarni "Determination of Range of Splash of Testing Fluid during Hydro Testing of Knife Gate Valve" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, URL: https://www.ijtsrd.com/papers/ijtsrd35747.pdf Paper Url: https://www.ijtsrd.com/engineering/mechanical-engineering/35747/determination-of-range-of-splash-of-testing-fluid-during-hydro-testing-of-knife-gate-valve/gourav-vivek-kulkarni
FUTURE NDT (An ISO 9001:2015 Certified Organization), the organization which was formed to provide career for many students in the field of NDT. FUTURE NDT was the first choice for pioneers who are looking for jobs. Our aim is to provide quality education to the candidates & also to provide placements support to candidates.
For more information Regarding NDT Training & Placements contact:
FUTURE NDT- Leading NDT Training Institute in India
D.No: 11-293, Krishna Nagar, Auto nagar Check Post Center, Beside Andhra Bank, Vijayawada, India- 520007, A.P, India.
Contact no's: +91-9440586869.(FUTURE NDT Admin)
Email: admin@futurendt.com
Website: www.futurendt.com
1. Purpose of Hydro test.
2. Types of Pressure Test.
3. Procedure of Hydro test.
4. Limitations of Pneumatic Test.
5. Hydro testing test Pressure.
6. Test pressure subjected to external pressure.
7. Hydro test Pressure according to different process.
8. Volume required for the Hydro testing.
9. Pipeline De watering, Cleaning & Drying.
CHAENG (Great Wall Steel Casting) is experienced in manufacturing steel casting parts for vertical roller mill. www.partscasting.com
E-mail: casting@chaeng.co
With a wide range of applications varying from white goods, automotive, and aerospace applications, sheet metals are often high in strength relative to their cross section area. It’s important to note that formability and ductility is also crucial, for which the common testing requirements are similar across applications. Explore the challenges in sheet metal testing.
Determination of Range of Splash of Testing Fluid during Hydro Testing of Kni...ijtsrd
There are certain trivial experimental findings which may not have a major significance but their execution is considered to be of such a nature as to complete the study in the specified area. Likewise in the field of hydro testing of valves and flow equipment, there is a basic requirement of operation of the same under influence of applied hydro pressure. This is required to determine the performance parameters like the thrust and the torque required to operate the equipment. While doing so, in addition to the qualitative requirements, an additional requirement of space has to be considered to ensure the surrounding area is not affected due to splashes of the testing fluid while under pressure. This paper shall consider such a case for hydro testing of a knife gate valve. At a given pressure, when the door or gate of the valve is initiated to open, there is an initial splash of testing fluid which ejects out of the orifice created due to the opening. The horizontal range of this splash shall be mathematically determined. An experimental finding shall then be presented to confirm the derived formulae. A conclusion shall be drawn thereafter dictating the percentage error and the employability of the derived formulae. Gourav Vivek Kulkarni "Determination of Range of Splash of Testing Fluid during Hydro Testing of Knife Gate Valve" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, URL: https://www.ijtsrd.com/papers/ijtsrd35747.pdf Paper Url: https://www.ijtsrd.com/engineering/mechanical-engineering/35747/determination-of-range-of-splash-of-testing-fluid-during-hydro-testing-of-knife-gate-valve/gourav-vivek-kulkarni
FUTURE NDT (An ISO 9001:2015 Certified Organization), the organization which was formed to provide career for many students in the field of NDT. FUTURE NDT was the first choice for pioneers who are looking for jobs. Our aim is to provide quality education to the candidates & also to provide placements support to candidates.
For more information Regarding NDT Training & Placements contact:
FUTURE NDT- Leading NDT Training Institute in India
D.No: 11-293, Krishna Nagar, Auto nagar Check Post Center, Beside Andhra Bank, Vijayawada, India- 520007, A.P, India.
Contact no's: +91-9440586869.(FUTURE NDT Admin)
Email: admin@futurendt.com
Website: www.futurendt.com
1. Purpose of Hydro test.
2. Types of Pressure Test.
3. Procedure of Hydro test.
4. Limitations of Pneumatic Test.
5. Hydro testing test Pressure.
6. Test pressure subjected to external pressure.
7. Hydro test Pressure according to different process.
8. Volume required for the Hydro testing.
9. Pipeline De watering, Cleaning & Drying.
CHAENG (Great Wall Steel Casting) is experienced in manufacturing steel casting parts for vertical roller mill. www.partscasting.com
E-mail: casting@chaeng.co
Design and Analysis of Impregnation Chamber Used In Vacuum Pressure Impregnat...IOSR Journals
The simple explanation is that in nature and in manufacturing, things leak. Vacuum impregnation
stops leak. The ultimate goal of vacuum impregnation is to seal leak/migration paths without impacting the
functional, assembly or appearance characteristics of a part. The impregnation chamber which is used in VPI
process operates maximum up to 80 to 150 psi.it is important to analyse and design the pressure vessel that will
provide safety, durability and serviceability to the company. Accomplishing this task will require a very good
understanding of behaviour and a good knowledge of parameters that affecting the pressure vessel due to
varying loads, pressure and thickness of shell element. The most important one is that the given geometry of
pressure vessel must be analysed to assure it should meet the design standards
ASNT Level II.pptx QA/QC Questions and AnswrsAllad19901
NDT is a specialized branch of engineering science which uses non-invasive techniques to determine the integrity of a material, component or structure without impairing its usefulness.
Design and Analysis of Impregnation Chamber Used In Vacuum Pressure Impregnat...IOSR Journals
The simple explanation is that in nature and in manufacturing, things leak. Vacuum impregnation
stops leak. The ultimate goal of vacuum impregnation is to seal leak/migration paths without impacting the
functional, assembly or appearance characteristics of a part. The impregnation chamber which is used in VPI
process operates maximum up to 80 to 150 psi.it is important to analyse and design the pressure vessel that will
provide safety, durability and serviceability to the company. Accomplishing this task will require a very good
understanding of behaviour and a good knowledge of parameters that affecting the pressure vessel due to
varying loads, pressure and thickness of shell element. The most important one is that the given geometry of
pressure vessel must be analysed to assure it should meet the design standards
ASNT Level II.pptx QA/QC Questions and AnswrsAllad19901
NDT is a specialized branch of engineering science which uses non-invasive techniques to determine the integrity of a material, component or structure without impairing its usefulness.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
3. ABSTRACT
• In order to evaluate the component without
causing damage is the principle of Non
Destructive Testing (NDT).
• It is a highly valuable technique that can save
both money and time in product
• evaluationDuring the process of casting a
metal object, for example, the metal may
shrink as it cools, and crack or introduce voids
inside the structure.
5. INTRODUCTION
• Nondestructive testing (NDT) is the process of
inspecting, testing, or evaluating materials,
components or assemblies for discontinuities,
or differences in characteristics without
destroying the serviceability of the part or
system.
• In other words, when the inspection or test is
completed the part can still be used
6. Importance of NDT
• NDT increases the saftey and relaibility of the
product during operation
• It decreases the cost of the product by reducing
scrap and conserving materials ,labor and energy
• NDT is widely used for routine or periodic
determination of quality of the plants and structure
during survice
• This is not only increase the saftey of operation but
also eliminate any shut down of the plant
