The document discusses the technologies used during the production and post-production phases of a project. A JVC camera was used to capture high quality footage, which was stored on SD cards and a video drive for safekeeping. Editing software like Final Cut Pro and Motion were used in post-production to edit footage, create titles, and develop a soundtrack using GarageBand. Blogger was utilized to document progress online over time.

1. WHICH TECHNOLOGIES DID I USE?

2. DURING THE PRODUCTION PHASE:
I used a JVC Camera, to produce
high quality footage
To record and to store footage I used an SD
memory card and a video drive, this made sure
that the footage was safe and couldn't’t be stolen
or deleted.

3. POST PRODUCTION PHASE:
We used editing software that is used by professionals, to ensure that we have the highest
quality product.
Motion was used to create the titles that were going to be placed over the footage and
garage band was used to create our initial sound track.
Motion
iMac
Final Cut Pro

4. HERE ARE SOME EXAMPLES OF WHERE I USED
THE TECHNOLOGY:
Final Cut Pro, to put together our sequence.
Motion, for our titles
Garage band for our foley sounds and first
sound track.

5. HOW USEFUL WERE THEY?
• The technologies that we used were very helpful, they were specific for each task and
helped to produce high quality product, they also helped us be a little creative in out
production, which was really personal for use because we wanted to created a product
that used a bit of our imagination incorporated in it.
• Initially it was a little difficult to get an understanding on how the software worked, but
when we had a solid idea with how we wanted to create our product it became easier to
fully use al the functions that it had to offer.
• By the end we had a really good product just the way we wanted it to look.

6. PROGRESS:
• To catalogue and show our progress, we used Blogger on line to create a time lime of
actions.