It matters a lot when the time comes for selecting a quality industrial centrifugal process fan for your factory. It has to be selected carefully as high-quality industrial centrifugal process fans play a significant role in proper air handling arrangements in any factory. If you have to install a fan in a factory or manufacturing plant then you must consider many elements to fulfill your specific requirements.

1. QUALITY PARAMETERS – INDUSTRIAL
CENTRIFUGAL PROCESS FANS
Neel Rao
Writes on Reitz India industrial centrifugal process
fans and Industrial centrifugal blower fans

2. It matters a lot when the time comes for selecting a quality industrial centrifugal
process fan for your factory. It has to be selected carefully as high-quality industrial
centrifugal process fans play a significant role in proper air handling arrangements in
any factory. If you have to install a fan in a factory or manufacturing plant then you
must consider many elements to fulfill your specific requirements.

3. Different types of process fans as per your processing requirements:
The industrial centrifugal fan selection method starts with determining the
manufacturing processing requirement in your factory. By studying/surveying the
space required, assessing the required airflow and other specifications of the
manufacturing process requirement.
• Explore the type of air motion required for your implementation and the type of
fan needed for it.
• Process fans work in various ways. Centrifugal fans have a wheel (impeller) that
extracts air into the housing channel rotates 90 degrees and hastens radially, and
exits the fan housing. Centrifugal fans are generally applied for lower circulations
and higher enforcement. As they are muted, they also provide a benefit in terms of
reduced noise levels. They consume more space and are costlier than propeller fans.
• On the other hand, the axial fan is composed of a propeller circulated on its axis by
a motor. It drives air at an axial angle through a cylindrical housing or formed orifice
panel. In comparison to centrifugal fans, axial fans cover less space.

4. Main Parameters:
Many technical parameters are measured scientifically regarding industrial process
fans. The appropriate process fan should be able to meet these technical
specifications. Some of the major ones are listed below.
• Airflow rate: The airflow rate defines the quantity of air moving through an
industrial fan over time. It is measured in cubic feet per minute (CFM) or the metric
equivalent, cubic meters per hour (M3/Hr). 1 CFM = 1.6990 x M3/Hr.
• Static pressure: Static Pressure is the intransigence to airflow (friction) which is
occurred by the air moving through a pipe, channel, hose, filter, or air control
damper. Static Pressure is measured in inches water gauge (inWG) or the metric
equivalent, millimeters water gauge (mmWG). 1 inWG = 25.4 x mmWG.

5. • Density: Density shifts from temperature and barometric pressure discrepancies
which should be amended to standard situations before choosing a fan.
• Altitude: The altitude at which the fan or blower will be working. It will also impact
the execution of the centrifugal fan.
Air Temperature: The temperature of the air going through the fan or blower will
affect the performance of the fan or blower.

6. Other factors:
• Noise level: If excessive noise occurs then a high volume-low speed industrial or
commercial ceiling fan that creates less noise is a perfect choice. Small fans require
to operate at high speeds to expand airflow.
• Ambient temperature: The temperature of the air outside the fan or blower can
simulate the operation of the fan or blower. The bulk of fans blows air at room
temperature while some should work under particular temperatures or
environmental ambiances.
So, if you want an industrial process fan for de-dusting, pre-air heating, furnace air,
and industrial drying, then you should ensure that the selection must be done
diligently to ensure the fan fulfills all specifications in your technical requirements.

7. About REITZINDIA
Reitz India has set a benchmark to deliver high quality fans for heavy duty industries
which can work at precise operating conditions like high temperatures and pressures.
Reitz offer idealistic Centrifugal Fan and Centrifugal blower design that can be used in
all large scale process industries like cement, iron & steel, power plants, fertilizers/
chemicals and more.
Thank you for spending your precious time in reading this article!