PSC has invested in stocking the consumables that are required on drilling rigs and is now building up inventory of all Ropes-Soaps-Dopes items. For more information visit us at www.pscrigessentials.com or www.rigconsumables.com or send us an email at rfq(at)projectsalescorp.com
PSC has invested in stocking the consumables that are required on drilling rigs and is now building up inventory of all Ropes-Soaps-Dopes items. For more information visit us at www.pscrigessentials.com or www.rigconsumables.com or send us an email at rfq(at)projectsalescorp.com
Schneider,
Catalog Thiết Bị Điện Schneider, Catalog Thiết Bị Điện,
Catalog Phụ Kiện Schneider, Catalog Phụ Kiện,
Catalog Schneider, Catalog,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Schneider tại https://dienhathe.com
Xem thêm các Catalog khác của Schneider tại https://dienhathe.info
Để nhận báo giá sản phẩm Schneider vui lòng gọi: 0907.764.966
Schneider,
Catalog Thiết Bị Điện Schneider, Catalog Thiết Bị Điện
Catalog Phụ Kiện Schneider, Catalog Phụ Kiện,
Catalog Schneider, Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Schneider tại https://dienhathe.com
Xem thêm các Catalog khác của Schneider tại https://dienhathe.info
Để nhận báo giá sản phẩm Schneider vui lòng gọi: 0907.764.966
Schneider,
Catalog Thiết Bị Điện Schneider, Catalog Thiết Bị Điện
Catalog Phụ Kiện Schneider, Catalog Phụ Kiện,
Catalog Schneider, Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Schneider tại https://dienhathe.com
Xem thêm các Catalog khác của Schneider tại https://dienhathe.info
Để nhận báo giá sản phẩm Schneider vui lòng gọi: 0907.764.966
Schneider,
Catalog Thiết Bị Điện Schneider, Catalog Thiết Bị Điện
Catalog Phụ Kiện Schneider, Catalog Phụ Kiện,
Catalog Schneider, Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Schneider tại https://dienhathe.com
Xem thêm các Catalog khác của Schneider tại https://dienhathe.info
Để nhận báo giá sản phẩm Schneider vui lòng gọi: 0907.764.966
PSC has invested in stocking the consumables that are required on drilling rigs and is now building up inventory of all Ropes-Soaps-Dopes items. For more information visit us at www.pscrigessentials.com or www.rigconsumables.com or send us an email at rfq(at)projectsalescorp.com
Kraus & naimer disconnectors kn pv-gbDien Ha The
Catalog Kraus Naimer, Catalog,
Catalog Thiết Bị Điện Kraus Naimer, Catalog Thiết Bị Điện,
Catalog Biến Tần Kraus Naimer, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Kraus Naimer tại https://dienhathe.com
Xem thêm các Catalog khác của Kraus Naimer tại https://dienhathe.info
Để nhận báo giá sản phẩm Kraus Naimer vui lòng gọi: 0907.764.966
PSC has invested in stocking the consumables that are required on drilling rigs and is now building up inventory of all Ropes-Soaps-Dopes items. For more information visit us at www.pscrigessentials.com or www.rigconsumables.com or send us an email at rfq(at)projectsalescorp.com
Schneider,
Catalog Thiết Bị Điện Schneider, Catalog Thiết Bị Điện,
Catalog Phụ Kiện Schneider, Catalog Phụ Kiện,
Catalog Schneider, Catalog,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Schneider tại https://dienhathe.com
Xem thêm các Catalog khác của Schneider tại https://dienhathe.info
Để nhận báo giá sản phẩm Schneider vui lòng gọi: 0907.764.966
Schneider,
Catalog Thiết Bị Điện Schneider, Catalog Thiết Bị Điện
Catalog Phụ Kiện Schneider, Catalog Phụ Kiện,
Catalog Schneider, Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Schneider tại https://dienhathe.com
Xem thêm các Catalog khác của Schneider tại https://dienhathe.info
Để nhận báo giá sản phẩm Schneider vui lòng gọi: 0907.764.966
Schneider,
Catalog Thiết Bị Điện Schneider, Catalog Thiết Bị Điện
Catalog Phụ Kiện Schneider, Catalog Phụ Kiện,
Catalog Schneider, Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Schneider tại https://dienhathe.com
Xem thêm các Catalog khác của Schneider tại https://dienhathe.info
Để nhận báo giá sản phẩm Schneider vui lòng gọi: 0907.764.966
Schneider,
Catalog Thiết Bị Điện Schneider, Catalog Thiết Bị Điện
Catalog Phụ Kiện Schneider, Catalog Phụ Kiện,
Catalog Schneider, Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Schneider tại https://dienhathe.com
Xem thêm các Catalog khác của Schneider tại https://dienhathe.info
Để nhận báo giá sản phẩm Schneider vui lòng gọi: 0907.764.966
PSC has invested in stocking the consumables that are required on drilling rigs and is now building up inventory of all Ropes-Soaps-Dopes items. For more information visit us at www.pscrigessentials.com or www.rigconsumables.com or send us an email at rfq(at)projectsalescorp.com
Kraus & naimer disconnectors kn pv-gbDien Ha The
Catalog Kraus Naimer, Catalog,
Catalog Thiết Bị Điện Kraus Naimer, Catalog Thiết Bị Điện,
Catalog Biến Tần Kraus Naimer, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Kraus Naimer tại https://dienhathe.com
Xem thêm các Catalog khác của Kraus Naimer tại https://dienhathe.info
Để nhận báo giá sản phẩm Kraus Naimer vui lòng gọi: 0907.764.966
PSC has invested in stocking the consumables that are required on drilling rigs and is now building up inventory of all Ropes-Soaps-Dopes items. For more information visit us at www.pscrigessentials.com or www.rigconsumables.com or send us an email at rfq(at)projectsalescorp.com
Catalog cs switch disconnector_fuse_units_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Catalog cs switch disconnector_fuse_unitsDien Ha The
Catalog cs switch disconnector_fuse_units
Catalog CS,
Catalog Thiết Bị Điện CS,
Catalog Điện Công Nghiệp CS,
http://dienhathe.com,
Xem thêm các sản phẩm khác của CS tại https://dienhathe.com
Để nhận báo giá sản phẩm CS vui lòng gọi: 0907.764.966
Catalog cs switch disconnector_fuse_units
C&S,
Catalog C&S,
Catalog Thiết Bị Điện C&S,
Catalog Điện Công Nghiệp C&S,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Autonics tại https://dienhathe.com
Để nhận báo giá sản phẩm vui lòng gọi: 0907.764.966
Nexans Euromold HV high voltage bushings are suitable for use in oil-insulated high voltage electrical equipment up to 33kV- this includes oil-insulated HV bushings for high voltage transformers, motors, switchgear and capacitors. Nexans Euromold bushings are epoxy insulated in accordance with CENELEC EN 50181. Nexans Euromold plug-in bushings 750S1, 775S1, 775T1 meet the requirements of ANSI/IEEE 386 with 800amp and 1250amp current ratings. Nexans HV bushings are suitable for 5/8" threading systems.
Nexans Euromold Oil-Insulated Epoxy HV High Voltage Bushings
6/10 (12kV)
6.35/11 (12kV)
8.7/15 (17.5kV)
12/20 (24kV)
12.7/22 (24kV)
18/33 (36kV)
Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes
Hellermann Tyton Helashrink heatshrink boots and moulded shapes in conjunction with specialist heatshrink tubing make it easy to fabricate complete jacketed wire and cable harnessing and interconnection systems.
Hellermann Tyton Helashrink heatshrink boots (straight and right-angled) and moulded shapes are available for the complete range of electrical and electronic harnessing applications. Heat shrink boots and shapes can be sealed with special adhesives and encapsulants to ensure the proper degree of mechanical support, strain relief and environmental protection. Encapsulating the complete harnessing and interconnection system to the desired configuration is easily and neatly accomplished with minimum weight and bulk using Hellermann Tyton Helashrink heat shrink components.
Hellermann Tyton Heat Shrink Moulded Shapes & Boots - Overview....
Hellermann Tyton Helashrink heat shrinkable shapes, end caps and cable break-out boots with and without inner adhesive. Hellermannn Tyton heat shrink backshells, 2-way outlet shapes, 3-way outlet shapes, 4-way outlet shapes, 5-way outlet shapes up to 6-way outlet shapes. Hellermann Tyton heat shrink right angle boot 90°, 45°C angle, T-shapes, Y-outlet, VG-style shapes. Heat shrink cable end caps for low voltage applications, two components epoxy adhesive and hot melt tape.
Medium Voltage Fuses
E-Rated Fuses for Transformers and Feeders
within this range. It is possible for the fuse to be exposed to
an overcurrent lower than the value given by the one hour
criteria. In that case, a different overcurrent protection device
would be required to interrupt the overcurrent.
3. Back-up – defined by ANSI C37.40 as “a fuse capable of
interrupting all currents from the maximum interrupting rating
current down to the minimum interrupting current.”
The minimum interrupting current is the lowest current that
the fuse will be able to clear properly. This creates a need to
place a low current interrupting device, such as motor
overloads, in series with the back-up rated fuse.
E- and R-Rated Fuses
In North America, current limiting fuses typically fall into the
category of E-Rated fuses and R-Rated fuses. Bussmann
also offers a wide range of current limiting fuses designed to
BS, DIN and IEC standards.
E-Rated fuses are used to protect feeder circuits, power
transformers and potential transformers. E-Rated fuses have
defined current response times specified by ANSI C37.46.
E-Rated fuses 100A and below must melt in 300sec at an
rms current within the range of 200% to 240% of the
continuous current rating. E-Rated fuses above 100A must
melt in 600sec at an rms current within the range of 240% to
264% of the continuous current rating of the fuse.
Bussmann offers a wide variety of full range and general
purpose E-Rated fuses from 2.4kV up to 38kV.
R-Rated fuses are back-up fuses that provide short-circuit
protection for motor circuits. They are applied with MV motor
starters which provide the overload protection for the circuit.
R-Rated fuses also have defined current response times
specified by ANSI C37.46. R-Rated fuses will melt in a range
of 15 – 35sec at a current equal to 100 times the “R” rating.
Bussmann offers 2.4kV, 5.08kV, 7.2kV and 8.3kV R-Rated
fuses for motor circuit protection.
Power Cable Accessories upto 42k v (for terminations & joints tender)Eric Bin
Shenzhen Chuangyin Co., Ltd. is a leading company in China for manufacturing of Premoulded terminations, underground cable joints, separable connectors, and equipment bushings for GIS/RMU. Products designed as European standard and American standard, which are suitable for all our clients requirements. For more details, please send mail to sales01@chuangy.com (Marketing manager. Mr. Eric Bin)
Drop is any object that falls from its previous static position under its own weight. Dropped Objects are among the Top 10 causes of Fatality and Serious Injury in the Oil and Gas Industry. Our focus would be on products and systems that can be integrated into the customer’s safety management systems to identify potential dropped object hazards, prevent their occurrence, and mitigate their outcome. We would share information on a broad array of tools, products and deliverables, including inspection programmes, awareness videos and presentations, safety checklists, guidelines, procedures and best practices as a part of building up awareness on DROPS and also offer our customers to buy these special dropped object prevention products and services from one source.
Concept is simple - if we can keep our hands at a distance while doing tasks like guiding, positioning, pushing, pulling slung loads or doing anything to bring it to its final place – we avoid a “caught between” kind of situation and protect our hands.
More Related Content
Similar to PSC Stock of WALL MOUNTED SOCKET PLUGS (3).pdf
PSC has invested in stocking the consumables that are required on drilling rigs and is now building up inventory of all Ropes-Soaps-Dopes items. For more information visit us at www.pscrigessentials.com or www.rigconsumables.com or send us an email at rfq(at)projectsalescorp.com
Catalog cs switch disconnector_fuse_units_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Catalog cs switch disconnector_fuse_unitsDien Ha The
Catalog cs switch disconnector_fuse_units
Catalog CS,
Catalog Thiết Bị Điện CS,
Catalog Điện Công Nghiệp CS,
http://dienhathe.com,
Xem thêm các sản phẩm khác của CS tại https://dienhathe.com
Để nhận báo giá sản phẩm CS vui lòng gọi: 0907.764.966
Catalog cs switch disconnector_fuse_units
C&S,
Catalog C&S,
Catalog Thiết Bị Điện C&S,
Catalog Điện Công Nghiệp C&S,
http://dienhathe.com,
Xem thêm các sản phẩm khác của Autonics tại https://dienhathe.com
Để nhận báo giá sản phẩm vui lòng gọi: 0907.764.966
Nexans Euromold HV high voltage bushings are suitable for use in oil-insulated high voltage electrical equipment up to 33kV- this includes oil-insulated HV bushings for high voltage transformers, motors, switchgear and capacitors. Nexans Euromold bushings are epoxy insulated in accordance with CENELEC EN 50181. Nexans Euromold plug-in bushings 750S1, 775S1, 775T1 meet the requirements of ANSI/IEEE 386 with 800amp and 1250amp current ratings. Nexans HV bushings are suitable for 5/8" threading systems.
Nexans Euromold Oil-Insulated Epoxy HV High Voltage Bushings
6/10 (12kV)
6.35/11 (12kV)
8.7/15 (17.5kV)
12/20 (24kV)
12.7/22 (24kV)
18/33 (36kV)
Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes
Hellermann Tyton Helashrink heatshrink boots and moulded shapes in conjunction with specialist heatshrink tubing make it easy to fabricate complete jacketed wire and cable harnessing and interconnection systems.
Hellermann Tyton Helashrink heatshrink boots (straight and right-angled) and moulded shapes are available for the complete range of electrical and electronic harnessing applications. Heat shrink boots and shapes can be sealed with special adhesives and encapsulants to ensure the proper degree of mechanical support, strain relief and environmental protection. Encapsulating the complete harnessing and interconnection system to the desired configuration is easily and neatly accomplished with minimum weight and bulk using Hellermann Tyton Helashrink heat shrink components.
Hellermann Tyton Heat Shrink Moulded Shapes & Boots - Overview....
Hellermann Tyton Helashrink heat shrinkable shapes, end caps and cable break-out boots with and without inner adhesive. Hellermannn Tyton heat shrink backshells, 2-way outlet shapes, 3-way outlet shapes, 4-way outlet shapes, 5-way outlet shapes up to 6-way outlet shapes. Hellermann Tyton heat shrink right angle boot 90°, 45°C angle, T-shapes, Y-outlet, VG-style shapes. Heat shrink cable end caps for low voltage applications, two components epoxy adhesive and hot melt tape.
Medium Voltage Fuses
E-Rated Fuses for Transformers and Feeders
within this range. It is possible for the fuse to be exposed to
an overcurrent lower than the value given by the one hour
criteria. In that case, a different overcurrent protection device
would be required to interrupt the overcurrent.
3. Back-up – defined by ANSI C37.40 as “a fuse capable of
interrupting all currents from the maximum interrupting rating
current down to the minimum interrupting current.”
The minimum interrupting current is the lowest current that
the fuse will be able to clear properly. This creates a need to
place a low current interrupting device, such as motor
overloads, in series with the back-up rated fuse.
E- and R-Rated Fuses
In North America, current limiting fuses typically fall into the
category of E-Rated fuses and R-Rated fuses. Bussmann
also offers a wide range of current limiting fuses designed to
BS, DIN and IEC standards.
E-Rated fuses are used to protect feeder circuits, power
transformers and potential transformers. E-Rated fuses have
defined current response times specified by ANSI C37.46.
E-Rated fuses 100A and below must melt in 300sec at an
rms current within the range of 200% to 240% of the
continuous current rating. E-Rated fuses above 100A must
melt in 600sec at an rms current within the range of 240% to
264% of the continuous current rating of the fuse.
Bussmann offers a wide variety of full range and general
purpose E-Rated fuses from 2.4kV up to 38kV.
R-Rated fuses are back-up fuses that provide short-circuit
protection for motor circuits. They are applied with MV motor
starters which provide the overload protection for the circuit.
R-Rated fuses also have defined current response times
specified by ANSI C37.46. R-Rated fuses will melt in a range
of 15 – 35sec at a current equal to 100 times the “R” rating.
Bussmann offers 2.4kV, 5.08kV, 7.2kV and 8.3kV R-Rated
fuses for motor circuit protection.
Power Cable Accessories upto 42k v (for terminations & joints tender)Eric Bin
Shenzhen Chuangyin Co., Ltd. is a leading company in China for manufacturing of Premoulded terminations, underground cable joints, separable connectors, and equipment bushings for GIS/RMU. Products designed as European standard and American standard, which are suitable for all our clients requirements. For more details, please send mail to sales01@chuangy.com (Marketing manager. Mr. Eric Bin)
Similar to PSC Stock of WALL MOUNTED SOCKET PLUGS (3).pdf (20)
Drop is any object that falls from its previous static position under its own weight. Dropped Objects are among the Top 10 causes of Fatality and Serious Injury in the Oil and Gas Industry. Our focus would be on products and systems that can be integrated into the customer’s safety management systems to identify potential dropped object hazards, prevent their occurrence, and mitigate their outcome. We would share information on a broad array of tools, products and deliverables, including inspection programmes, awareness videos and presentations, safety checklists, guidelines, procedures and best practices as a part of building up awareness on DROPS and also offer our customers to buy these special dropped object prevention products and services from one source.
Concept is simple - if we can keep our hands at a distance while doing tasks like guiding, positioning, pushing, pulling slung loads or doing anything to bring it to its final place – we avoid a “caught between” kind of situation and protect our hands.
The Marketing Services Unit of PSC Dubai in Silicon Oasis DDP is responsible for business development and trading of our key brands in the Industries worldwide. The portfolio includes oilfield equipments, bar and rod mill spares (pinch rolls, guide rollers, HSS rolls, etc) and PSC Hands-Free Safety Tools.
Description:
International sourcing company based in Dubai Free Zone.
Focus:
Specializes in equipment, spare parts, and consumables
procurement.
Backed By:
Supported by Project Sales Corp, a leading rig parts supplier in
India.
Offerings:
Supplies PPE, workplace safety gear, and oilfield lubricants.
Mission:
Importing products needed by drilling rig operators in India.
Competitive Pricing:
Quotes competitive prices for imported goods.
Location Advantage:
Located in a Free Trade Zone, exempt from VAT and Customs.
With over thousands of products in its stocking range, Project Sales Corp is undoubtedly India’s largest oilfield ropes, soaps, dopes store. We call it the Rig Essentials Line.
Take a look inside to see some of the key products that we stock in this category of MRO, Tools, Safety and Rig Essentials. Whether you are a rig operator or an oilfield supplier, you will find consolidating your purchases with us for the items we stock would be the right way to service your end-users requirement the quickest way!
How We Work
Imagine using a $200 a pail dope and using a $1 dope brush, the savings you have with the brush costs, you don’t realise the loss you incur with the dope as a faulty brush creates pilferage of materials, improper application of dopes and overall a total higher costs than the savings you made buying the cheap dope brush.
Keeping this logic in mind that a cheap substitute ultimately costs more in total costs, Project Sales Corp has built up a portfolio of proven good quality high performance products from India and worldwide used on-board drilling rigs. They improve reliability, reduce overall costs, downtime and provide user a peace of mind with daily essentials on the rig.
We don’t stock the quality that generally sells in the local markets, we bring in products that have proven themselves in being able to make a positive difference. That’s sums up our strategy to this core product category – The rig essentials line of Ropes, Soaps, Dopes that has contributed over $25 million of revenues in last 10 years.
The daily materials used on a rig are colloquially referred to as Rope, Soap, and Dope.
➢ Rope referred to chains and ropes used to hoist materials up to derricks and platforms
➢ Soap was used in reference to products and tools used to clean machinery, tools, the rig, and the workers themselves
➢ Dope meant the lubricants, grease, and fuel - the essential liquids that were employed to keep machinery and the rig up and running.
Our workplace safety range comprises of products that can mitigate various kinds of risks in workplace or improve safety facility identification to assist workers with working in a safer environment. Key products include Slips Trips and Falls protection with Anti-skid tapes, Barricading Tapes, Lane Marking Tapes, 5S Program, Utility Hooks for Cables and Hoses, Facility signages, Traffic control products, and more. We also stock scaffolding and ladder tags, small instrument tagging systems like Microtags and Nanotags, Confined Space Entry Kits, etc. PSC Whipchecks are used as hose restraints to prevent hoses from whipping. The Nightstick range of intrinsic safety flashlights range with world’s first dual light improves safety with visibility for near and far objects, at the same time. Safepads improve safety while working with scaffold and all kinds of protruding objects.
PSC Houston Oilfield Supplies LLC aims to supply OEM parts to drilling rigs worldwide. With over two decades of experience in the drilling spares business in India and Dubai, over 450 suppliers worldwide, of which over 200 are based out of Houston alone, we are the supplier that’s closest to the source for these parts in the United States.
Based out of Houston, PSC Houston Oilfield Supplies LLC can quickly ship out parts to the rigs thus reducing downtime. There is nothing in specific we stock, and there is no limit to what we can source, you just need to let us know. We can reach out to our extensive vendor base and find out the source with the quickest delivery.
With trained international sourcing teams supporting from India, Dubai and Houston, you can expect to get the fastest response to your requirements. Our India unit Project Sales Corp (PSC) stocks over a 1000 sku’s of stuff that goes out to the oilfield and services all the drilling contractors, EPC companies in offshore and oilfield services companies. PSC Gulf supplies parts to some of the leading operators in the Middle East. The PSC Houston office works closely with the OEMs to get you the most competitive pricing and the shortest lead time for critical parts.
With a team of 40 people spread across our offices, all focussed on one thing – drilling rig parts- we are just an email or call away.
With over two decades of experience in the drilling spares business in India and Dubai, over 450 suppliers worldwide, of which over 200 are based out of Houston alone, we are the supplier that’s closest to the source for these parts in the United States.
With offices in India, Dubai and US, we can deliver rig spares worldwide.
Lubrication accounts for a small part of the overall maintenance budgets and the right lubricant goes a long way to reduce downtime, improve reliability and enhance equipment life.
Leading bearing manufacturers have conducted studies to find out the reasons for premature bearing failure. More than one-third of bearing failures is due to imperfect lubrication. In many more cases, which cannot be traced directly to imperfect lubrication, it’s still the underlying cause.
Project Sales Corp is pleased to introduce its Sealing Compounds range. We represent one of the most exhaustive range of Sealing Compounds from around the world that finds application in sealing steam and gas turbines, compressors, pumps, gearboxes, flanges and more.
An ideal flanged joint would consist of two, mirror-finish, perfectly flat and parallel surfaces bolted directly together to create a leak-free seal. However, manufacturing processes do not allow for perfect sealing surfaces. Most flange faces have surface irregularities that cannot be sealed without the use of some type of compressible, resilient material or a combination of materials between them to seal the fluid being transferred. This is true even for the most finely machined surfaces as a turbine flange where the surface asperities can create a leak situation.
Slung loads are dangerous. Going close to it exposes one to various injuries, pinch, crush and foot and body injuries. There is tension in the load until it rests in the final position. There are obvious chances of injuring the fingers and hands and getting too close to the red zone where a suspended dropped object could fall on the foot or body. You also expose yourself to lacerations and abrasion when the object you are trying to guide is sharp or rough.
PSC introduces the PSC Guide-it SlingGrab, a simple to use load positioning tool to manage slung loads by using the special head designed for chains and wire rope slings, webbing slings, to grab and manoeuvre the slung loads while it moves to its final position. Concept is simple - if we can keep our hands at a distance while doing tasks like guiding, positioning, pushing, pulling slung loads or doing anything to bring it to its final place – we avoid a “caught between” kind of situation and protect our hands.
Available in 4 lengths and competitively priced, you can now make it a rule, no grabbing slings by hand, always use a PSC Guide-it SlingGrab. Please see attached for more details.
www.pschandsafety.com
www.pschandsfree.com
GasGrab - Project Report on Cylinder Lifting and Benefits with GasGrabProject Sales Corp
In 2007 Bradford University carried out a study of the GasGrab™. The 34 page report that came from this study includes a large amount of technical data that highlights the health and saftey benefits of using GasGrab™ when lifting gas cyclinders.
Click here to download and view the report.
Gasgrab™ is a property of Arrow (Newbury) Ltd and is marketed in India by Project Sales Corp www.pschandsfree.com
PSC is India’s largest manufacturer & exporter of Hands-Free and Hands-Off Safety Tools that enables you to carry out tasks in the oilfield without getting your hands close to the pinch and crush points. PSC hands-free safety tools can help to reduce hand and finger injuries by facilitating safe movement of the load by controlling the load from a distance, without physically touching the load. The product range includes Push/Pull Poles, Anti-Tangle Taglines, Hose Lifters, Lift Assist Pipe Lifting Aids, Slogging Spanner Holders, etc. In 2020-2021 it has exported products to USA, Canada, Africa, Mid-East, South East Asia.
PSC is India’s largest manufacturer & exporter of Hands-Free and Hands-Off Safety Tools that enables you to carry out tasks in the oilfield without getting your hands close to the pinch and crush points. PSC hands-free safety tools can help to reduce hand and finger injuries by facilitating safe movement of the load by controlling the load from a distance, without physically touching the load. The product range includes Push/Pull Poles, Anti-Tangle Taglines, Hose Lifters, Lift Assist Pipe Lifting Aids, Slogging Spanner Holders, etc. In 2020-2021 it has exported products to USA, Canada, Africa, Mid-East, South East Asia.
PSC has invested in stocking the consumables that are required on drilling rigs and is now building up inventory of all Ropes-Soaps-Dopes items. For more information visit us at www.pscrigessentials.com or www.rigconsumables.com or send us an email at rfq(at)projectsalescorp.com
PSC has invested in stocking the consumables that are required on drilling rigs and is now building up inventory of all Ropes-Soaps-Dopes items. For more information visit us at www.pscrigessentials.com or www.rigconsumables.com or send us an email at rfq(at)projectsalescorp.com
PSC Push/Pull poles are designed to help with hands-free guidance and root safety. It aids in the safe navigation, detection, and landing of hanging tools. Though its primary function is to protect you from pinch/crush points and places, it also assists in manoeuvring drill pipes, snagging of taglines, and sling leg snagging.
GET IN TOUCH:
EMAIL:
sales@projectsalescorp.com, shivani@projectsalescorp.com
QUOTE:
https://pschandsfree.com/quote/
Affordable Stationery Printing Services in Jaipur | Navpack n PrintNavpack & Print
Looking for professional printing services in Jaipur? Navpack n Print offers high-quality and affordable stationery printing for all your business needs. Stand out with custom stationery designs and fast turnaround times. Contact us today for a quote!
Cracking the Workplace Discipline Code Main.pptxWorkforce Group
Cultivating and maintaining discipline within teams is a critical differentiator for successful organisations.
Forward-thinking leaders and business managers understand the impact that discipline has on organisational success. A disciplined workforce operates with clarity, focus, and a shared understanding of expectations, ultimately driving better results, optimising productivity, and facilitating seamless collaboration.
Although discipline is not a one-size-fits-all approach, it can help create a work environment that encourages personal growth and accountability rather than solely relying on punitive measures.
In this deck, you will learn the significance of workplace discipline for organisational success. You’ll also learn
• Four (4) workplace discipline methods you should consider
• The best and most practical approach to implementing workplace discipline.
• Three (3) key tips to maintain a disciplined workplace.
Premium MEAN Stack Development Solutions for Modern BusinessesSynapseIndia
Stay ahead of the curve with our premium MEAN Stack Development Solutions. Our expert developers utilize MongoDB, Express.js, AngularJS, and Node.js to create modern and responsive web applications. Trust us for cutting-edge solutions that drive your business growth and success.
Know more: https://www.synapseindia.com/technology/mean-stack-development-company.html
B2B payments are rapidly changing. Find out the 5 key questions you need to be asking yourself to be sure you are mastering B2B payments today. Learn more at www.BlueSnap.com.
In the Adani-Hindenburg case, what is SEBI investigating.pptxAdani case
Adani SEBI investigation revealed that the latter had sought information from five foreign jurisdictions concerning the holdings of the firm’s foreign portfolio investors (FPIs) in relation to the alleged violations of the MPS Regulations. Nevertheless, the economic interest of the twelve FPIs based in tax haven jurisdictions still needs to be determined. The Adani Group firms classed these FPIs as public shareholders. According to Hindenburg, FPIs were used to get around regulatory standards.
LA HUG - Video Testimonials with Chynna Morgan - June 2024Lital Barkan
Have you ever heard that user-generated content or video testimonials can take your brand to the next level? We will explore how you can effectively use video testimonials to leverage and boost your sales, content strategy, and increase your CRM data.🤯
We will dig deeper into:
1. How to capture video testimonials that convert from your audience 🎥
2. How to leverage your testimonials to boost your sales 💲
3. How you can capture more CRM data to understand your audience better through video testimonials. 📊
The world of search engine optimization (SEO) is buzzing with discussions after Google confirmed that around 2,500 leaked internal documents related to its Search feature are indeed authentic. The revelation has sparked significant concerns within the SEO community. The leaked documents were initially reported by SEO experts Rand Fishkin and Mike King, igniting widespread analysis and discourse. For More Info:- https://news.arihantwebtech.com/search-disrupted-googles-leaked-documents-rock-the-seo-world/
Improving profitability for small businessBen Wann
In this comprehensive presentation, we will explore strategies and practical tips for enhancing profitability in small businesses. Tailored to meet the unique challenges faced by small enterprises, this session covers various aspects that directly impact the bottom line. Attendees will learn how to optimize operational efficiency, manage expenses, and increase revenue through innovative marketing and customer engagement techniques.
The effects of customers service quality and online reviews on customer loyal...
PSC Stock of WALL MOUNTED SOCKET PLUGS (3).pdf
1. FROM
RFQ Sales Team
Project Sales Corp
28 Founta Plaza, Suryabagh,
Visakhapatnam 530020 India
rfq@projectsalescorp.com
www.pscrigessentials.com
PHONE
9100932334
FOR
Project Sales Corporation
TO
Satish Agrawal
QUOTE NUMBER
1641
DATE
October 17, 2022
VALID UNTIL
November 30, 2022 at 10:00 AM
PSC Stock of WALL MOUNTED SOCKET/PLUGS
1.PALAZZOLI
PART NO: 471002
DESCRIPTION: 90° angled , WALL MOUNTED SOCKET OUTLETS
16A 50/60Hz 24V 2P - 471002
P471002
471002
CEE EXTRA-LOW VOLTAGE WALL MOUNTED INLET, 90° ANGLED, 16A 2P 20-25V 50-60HZ IP44
https://www.palazzoli.com/en/products/electrical-systems/cee-extra-low-voltage-plugs-and-sockets-in
-thermosplastic-from-16a-to-125a-ip44-and-ip67/wall-mounted-inlets-90-angled-for-extra-low-voltage-
ip44
P471102_EN
1,500.00
x 28
42,000.00
2.PALAZZOLI
PART NO: 471032
DESCRIPTION:Panel mounted sockets straight
16A 50/60Hz 24V 2P -471032
P471032
471032
CEE EXTRA-LOW VOLTAGE PANEL MOUNTED SOCKET, STRAIGHT, 16A 2P 20-25V 50-60HZ IP44
P471032_EN
1,500.00
x 65
97,500.00
2. 3.PALAZZOLI
PART NO:471103
DESCRIPTION:Straight flush-mounted socket-outlets
16A 50/60Hz 42V 2P 12h 471103
P471103
471103
CEE EXTRA-LOW VOLTAGE PANEL MOUNTED SOCKET, STRAIGHT, 16A 2P 40-50V 50-60HZ
2,000.00
x 55
110,000.00
4.PALAZZOLI
PART NO: 471366
DESCRIPTION:HEAVY DUTY
90° angled , WALL MOUNTED SOCKET OUTLETS
32 A, 230 V, 50/60 HZ
3,000.00
x 8
24,000.00
5.PALAZZOLI
PART NO: 471367
DESCRIPTION:HEAVY DUTY
SKT PANEL ANG. 32A 3P 240V 6H IP67 MOULD
3,000.00
x 27
81,000.00
6.PALAZZOLI
PART NO: 471476
DESCRIPTION:HEAVY DUTY
Palazzoli 471476 - 3P+T 32A 380v 6h ip44
3,000.00
x 10
30,000.00
3. 7.PALAZZOLI
PART NO: 473106
DESCRIPTION:VOLTAGE
Lewden Palazzoli Wiring accessories enclosures Industrial Plugs Sockets Low Voltage Plugs ... Cee
Series glanded 473106 STRAIGHT CONNECTOR 2P 32A 42V 12H IP67.
https://www.palazzoli.com/en/products/electrical-systems/cee-extra-low-voltage-plugs-and-sockets-in
-thermosplastic-from-16a-to-125a-ip44-and-ip67/connectors-with-cable-glandfor-extra-low-voltageip6
7#product-sku-5686
P473106_EN
3,000.00
x 20
60,000.00
8.PALAZZOLI
PART NO: 473416
CEE STRAIGHT CONNECTOR
Technical specification : 32A 3P+E 380-415V 50-60HZ 6H IP67
3,000.00
x 2
6,000.00
9.PALAZZOLI
PART NO: 476102
DESCRIPTION:LOW VOLTAGE
16A 50/60Hz 42V 2P 12h 476102
P476102
476102
CEE EXTRA-LOW VOLTAGE WALL MOUNTED INLET, 90° ANGLED, 16A 2P 40-50V 50-60HZ 12H IP44
https://www.palazzoli.com/en/products/electrical-systems/cee-extra-low-voltage-plugs-and-sockets-in
-thermosplastic-from-16a-to-125a-ip44-and-ip67/wall-mounted-inlets-90-angled-for-extra-low-voltagei
p44#product-sku-5651
3,000.00
x 35
105,000.00
4. 10.PALAZZOLI
PART NO: 476105
DESCRIPTION:LOW VOLTAGE
32A 50/60Hz 42V 2P 12h 476105
P476105
476105
CEE EXTRA-LOW VOLTAGE WALL MOUNTED INLET, 90° ANGLED, 32A 2P 40-50V 50-60HZ 12H IP44
3,000.00
x 12
36,000.00
11.PALAZZOLI
PART NO: 477413
DESCRIPTION:Plugs with cable gland for heavy duty
PLUG 16AMP 4PIN 415V IP67
1,500.00
x 30
45,000.00
12.PALAZZOLI
PART NO: 477416
DESCRIPTION:Plugs with cable gland for heavy duty
PLUG 32AMP 4PIN 415V IP67
1,500.00
x 4
6,000.00
13.PALAZZOLI
PART NO: 477422
DESCRIPTION:Plugs with cable gland for heavy duty
PLUG 16A 5P 415V GLANDED 6H IP44 MOULDED
1,500.00
x 1
1,500.00
5. 14.PALAZZOLI
PART NO: 113030
DESCRIPTION:MOUNTING
113030
RONDO JUNCTION BOX IN ALUMINIUM ALLOY DIA 82MM CABLE GLAND 3XM25
https://www.palazzoli.com/en/products/electrical-systems/rondo-domestic-and-industrial-compact-dev
ices-for-wall-mounting-in-aluminium-alloy-up-to-16a-ip55/junction-boxes-in-aluminium-alloy-for-wall-
mounting-ip54#product-sku-7711
P113030_EN
3,000.00
x 6
18,000.00
15.PALAZZOLI
PART NO:113040
RONDO JUNCTION BOX IN ALUMINIUM ALLOY DIA 82MM CABLE GLAND 4XM25 IP54
P113040_EN
3,000.00
x 5
15,000.00
16.GEWISS
PART NO: GW61026
DESCRIPTION:electrical standard connector,
Gewiss GW61026 - STRAIGHT WATERPROOF MOBILE PLUG - IP67 - 2P + E 16A 200-250V 50 / 60HZ
6H - QUICK ASSEMBLY AND WIRING
500.00
x 12
6,000.00
17.GEWISS
PART NO: GW63026
DESCRIPTION:WIRE CONNECTOR
Gewiss GW63026 - STRAIGHT WATERPROOF MOBILE SOCKET - IP67 - 2P + E 16A 200-250V 50 /
60HZ 6H - QUICK ASSEMBLY AND WIRING
500.00
x 5
2,500.00
6. 18.GEWISS
PART NO: GW64013
DESCRIPTION:MULTIPLE SOCKET-COUPLERS
Gewiss GW64013 - MOBILE MULTIPLIER 2 OUTPUTS IP67-PLUG 16A-2 SOCKETS 3P + T 400V 50 /
60HZ-RED-6H
2,500.00
x 9
22,500.00
19.GEWISS
PART NO: GW64027
DESCRIPTION:MULTIPLE SOCKET-COUPLERS
Gewiss GW64027 - MOBILE MULTIPLIER 3 OUTPUTS IP67-PLUG 16A-3 SOCKETS 3P + T 400V 50 /
60HZ-RED-6H
3,000.00
x 6
18,000.00
20.GEWISS
PART NO:GW64068
DESCRIPTION:MULTIPLE SOCKET-COUPLERS
GW64068 - MULTIPLE SOCKET-COUPLERS 3 OUTPUTS IP67 - PLUG 32A - 2 SOCKET-OUTLETS
3P+E 400V 50/60HZ - RED - 6H
3,000.00
x 2
6,000.00
21.GEWISS
PART NO: GW64209
DESCRIPTION:SYSTEM ADAPTER
GW64209 - SYSTEM ADAPTOR - FROM DOMESTIC TO INDUSTRIAL IP44 - PLUG 2P+E 16A 250V ac
50/60HZ GERMAN/FRENCH - SOCKET OUTLET 2P+E 16A 230V ac
1,500.00
x 3
4,500.00
7. 22.GEWISS
PART NO: GW64210
DESCRIPTION:SYSTEM ADAPTER
GW64210 - SYSTEM ADAPTOR - FROM INDUSTRIAL TO DOMESTIC IP44 - SOCKET-OUTLET 2P+E
16A 230V ac 50/60HZ - 1 PLUG 2P+E 10/16A GERMAN STD.
1,000.00
x 5
5,000.00
23. MASTERPLUG
PART NO:1991592(51)
DESCRIPTION: 6 SOCKET 2m EXTENSION LEAD
Masterplug Surge Protected 2 m 13 A 6-Gang Surge Protected Extension Lead with Individually
Switched Sockets - White
1,000.00
x 11
11,000.00
24.HUBBEL
PART NO:HBL14W47
DESCRIPTION:PLUG
HBL14W47
Power Entry Connector, Power Entry, 15 A, Yellow, PVC (Polyvinylchloride) Body, 125 V
https://www.grainger.com/product/HUBBELL-WIRING-DEVICE-KELLEMS-Watertight-Straight-Blade-1X
976
2,500.00
x 14
35,000.00
25.HUBBEL
PART NO: HBL5266C
DESCRIPTION:PLUG
Straight Blade Devices, Male Plug, Insulgrip-Heavy Duty, Industrial/Commercial Grade, Straight, 2-Pole
3- Wire Grounding, 15A,125V, 5-15P and White
https://www.grainger.com/product/HUBBELL-WIRING-DEVICE-KELLEMS-Straight-Blade-Plug-Industria
l-4A250
1,440.00
x 7
10,080.00
8. 26.WOODHEAD
PART NO: 2709
DESCRIPTION:CONNECTOR
Woodhead® Super-Safeway® 2709 130142 Heavy Duty Single Receptacle Locking Blade Connector,
208 VAC, 20 A, 4 Pole, 4 Wires
3,000.00
x 12
36,000.00
27.WOODHEAD
PART NO: 2609
DESCRIPTION:PLUG
Woodhead® Super-Safeway® 2609 130142 Heavy Duty Locking Plug With Locking Blade, 208 VAC, 20
A, 4 Pole, 4 Wires
3,000.00
x 12
36,000.00
28.DANIEL WOODHEAD
PART NO:4V363
DESCRIPTION:HANDLAMP
WOODHEAD
Hand Lamp, 25 ft., 13W, 120V
6,000.00
x 3
18,000.00
29.SMARTWARES
PART NO:10.002.41
DESCRIPTION:UNIVERSAL PLUG1950
An essential travel item to assure you can connect your electrical supplies all over the world. This
universal travel plug is suitable for Southern Europe (10/16A,250V), the USA (10/16A,250V) Africa and
Asia (10/16A,250V) and the UK (13A,250V)
1. SOUTH EUROPEAN ADAPTER 10/16A , 250V AC
2. AMERICAN ADAPTER 10/16A, 250V AC
3. COMMON ADAPTER 10/16A 250 V AC
4. COMMON WEALTH ADAPTER 13A, 250 V AC
https://www.youtube.com/watch?v=GTjWMRWmmAs
750.00
x 170
127,500.00
9. 30.BLACK ADAPTER UK PLUGS
1. ADAPTER PLUG WITH 2 ROUND PIN 10A,110- 250V AC, TRAVEL ADAPTER
x 80
31.EATON
PART NO:GHG5114306R0002
DESCRIPTION:
CEAG IP66 Black Surface Mount 2P+E Power Connector Socket ATEX, Rated At 16A, 250 V
17,500.00
x 36
630,000.00
32.EATON
PART NO:GHG5127406R0001
DESCRIPTION:HAZARDOUS PLUGS
Current Rating: 32A. Model: GHG5127406R0001. Custom Bundle: No. Type: Duplex Receptacle. MPN:
GHG5127406R0001. Brand: Eaton. Voltage: 415V
13,000.00
x 1
13,000.00
33.APPLETON RECEPTACLE
PART NO:EFSR2023
DESCRIPTION:
U-Line 1-Gang Replacement Receptacle, Number Of Poles: 3, Number Of Wires: 2, Amperage Rating:
20 AMP
, Voltage Rating: 125 VAC, Material: Copperfree
35,000.00
x 19
665,000.00
34.APPLETON
PART NO:EFSRGFI
APPLETON
Ground Fault Circuit Interrupter, 20A
80,000.00
x 11
880,000.00
10. 35.EATON
PARTNO:CCP3044BC
Eaton Crouse-Hinds series PowerMate CCP plug, 30A, 0.390-1.375", Four-wire, four-pole, Style 1,
Copper-free aluminum, 600 Vac/250 Vdc
10,400.00
x 9
93,600.00
36.EATON CROUSE HINDS
PART NO:GHG5117306R0001
EATON PART NO:GHG5117306R0001
CEAG IP66 Blue Cable Mount 2P+E Power Connector Plug ATEX, Rated At 16A, 250 V. Brand CEAG.
Manufacturers Part No. GHG5117306R0001.
6,000.00
x 31
186,000.00
37.EATON
PART NO:GHG5117406R0001
CEAG IP66 Red Cable Mount 3P+E Power Connector Plug ATEX, Rated At 16A, 415 V
6,500.00
x 1
6,500.00
38.HUBBEL PORTABLE CIRCUIT GUARD
PART NO: GFP15M
Extra Heavy Duty Multiple Outlet Portable GFCI with Manual Set, 15A, 120V AC, Yellow
By Hubbell Wiring Device-Kellems
Catalog ID: GFP15M
Power Protection Products, GFCI Portables, Commercial, Manual Set, 15A 120V AC, 5-15R, 6' Cord
Length, 4-6 mA Trip Level, Yellow.
High impact UV stabilized housing for long life
All-glass circuit board provides moisture immunity
Watertight GFCI housing for use in harsh environments
Manual Set
https://www.grainger.com/product/HUBBELL-WIRING-DEVICE-KELLEMS-Plug-In-GFCI-with-Cord-6-ft-
5Z977
40,000.00
x 3
120,000.00
11. 39.DANIEL WOODHEAD WATERTITE SAFEWAY MULTITAP
SERIES: 3200
Woodhead
Woodhead 1301350230 3200 Safeway Multi-tap Watertite Outlet Box
18,000.00
x 4
72,000.00
40.ERICSON WATERTITE DEVICES
PART NO:1610-CWCP
Watertight Straight Blade Connector: 5-15R, 15 Amps - Plugs and Receptacles, 125V AC, Yellow
Item #
40LN05
Mfr. Model #
1610-CW6P-AM
UNSPSC #
39121421
Catalog Page #
339
Country of Origin USA. Country of Origin is subject to change.
Designed with antimicrobial additives, this Ericson® watertight device provides continual, long-lasting
protection against the growth of bacteria, mold, mildew, and fungi. The wiring device can be used for
new and existing installations, and is suitable for a wide range of applications.
https://www.grainger.com/product/ERICSON-Watertight-Straight-Blade-40LN05
3,000.00
x 5
15,000.00
41.APPLETON RECEPTACLE COVER ASSEMBLY
PART NO:EFSR2023
U-Line 1-Gang Replacement Receptacle, Number Of Poles: 3, Number Of Wires: 2, Amperage Rating:
20 AMP
, Voltage Rating: 125 VAC, Material: Copperfree (4/10 Of 1 PCT Maximum) Aluminum, Nema
Rating: NEMA 3, 3R, Mounting: Box, Motor Horsepower: 1 HP
, Finish: Epoxy Powder Coat, Dimensions:
3 IN Width X 4.63 IN Height X 3.19 IN Depth, Standard: Class I, Division 1 And 2 Groups C, D, Class I,
Division 2, Groups B, C, D, Class II, Division 1 And 2 Groups F, G, Class III, UL Listed: E10784, E81751,
UL Standard: 1203, 1010, 894, CSA Standard: C22.2 No. 25, C22.2 No. 30, C22.2 No. 42, C22 No.159,
CSA Certified: 038644, For ECP Mating Plugs
52,000.00
x 19
988,000.00
12. 42.APPLETON RECEPTACLE 2 GANG
PART NO:EFSC275-2023
APPLETON EFSC275-2023
20A Explosion-Proof Aluminum Sealed Receptacle, 20A, 125V, 2-Gang
Technical Description:
Cover Type; 20 Amp Explosionproof Pin and Sleeve Receptacle Used on; U-Line Brand; Number of
Wires 2; Number of Poles 3; Material Epoxy Powder Coated Copper-Free Aluminum; Approval UL, CSA
120,000.00
x 3
360,000.00
43.STECK SHOCK-TITE RECEPTACLE
PART NO: SS3006B
2P+E, 16A, 6h, 250V AC, IP67
15,000.00
x 18
270,000.00
44.STAHL SHOCK-TITE RECEPTACLE
PART NO:8579/31-407
WALL-MOUNTING SOCKETS 63 A SERIES 8579/31
R. STAHL Series 8579/31 sockets for Zone 1/21 in a 4- and 5-pole version have full AC-3 switching
capacity up to 63 A. The high degree of protection IP66 guarantees the highest level of protection
against the penetration of dust and water in any application position. Self-cleaning lamellar contacts
provide optimum contact and the plugs can be inserted and removed in the zero position quickly and
easily. The load disconnect switch, with mechanical locking device and a handle that can be locked in
the 0 or I position, is an additional safety feature.
Reliable load disconnect switch with easily visible, lockable handle and switching position display
An integrated auxiliary contact for control and signalling purposes, can optionally be enhanced with
pluggable, easily retrofittable Ex e or Ex i auxiliary contacts
Wide temperature range for use
High mechanical impact and shock resistance
Perfect protection against the ingress of liquids and dust
Product Type: 8579/31-407
Product Description: Wall-mounting socket 63 A
Rated operational current: 63.000 A
Entry 1 type: 8161/7-M50-3516
Entry 2 type: 8290/3-M25
Rated operational voltage AC: 277/480 to 288/500 V AC
Auxiliary contacts: 2 (1 NO + 1 NC)
150,000.00
x 5
750,000.00
13. 45. STECK EMERGENCY STOP
PART NO: SQ1K
1X22MM emergency stop push button switch NO+NC scram Waterproof control box
2,000.00
x 1
2,000.00
46. MENNEKES SURFACE SOCKET
PART NO: 465-514
MENNEKES IP67 Red Wall Mount 4P Right Angle Socket, Rated At 63A, 415 V
10,000.00
x 1
10,000.00
47. ABTECH 3 POSITION EXPLOSION PROOF CHANGEOVER SWITCH
PART NO: ABCS6-1
SPECIFICATION: 9.38W
Application:
Hazardous and Industrial areas
Protection Degree:
IP66
Certification:
ATEX, IECEx & InMetro
Ex e II T4 (Ammeter only) or Ex ed IIC T4
Max ambient range: -20°C to +55°C
Material:
Carbon Loaded Glass Reinforced Polyester (Black)
ABCS6
DIMENSION: 122x120x90
WATTAGE: 4.5W
OPERATORS: 1 x Op
24,000.00
x 1
24,000.00
48. ADAPTER PLUG BLACK
15A, 125 V 2 ROUND PIN PLUG
250.00
x 30
7,500.00
14. 49. CEAG ELECTRICAL COUPLER
PART NO: GHG5113304R0001
CEAG IP66 Black Cable Mount 2P+E Power Connector Plug, Socket ATEX, Rated At 16A, 130 V
18,500.00
x 6
111,000.00
50. CEAG EX-e CONTROL STATION
PART NO: GHG4118101R1826
CEAG GHG411 Series Emergency Stop Push Button, Surface Mount, 1NO + 1NC
15,000.00
x 3
45,000.00
51. EATON CPP POWER PLUG
PART NO: CCP3034BC
CCP3034BC
Eaton Crouse-Hinds series PowerMate CCP plug, 30A, 0.390-1.375", Three-wire, four-pole, Style 2,
Copper-free aluminum, Reverse service, 600 Vac/250 Vdc
17,500.00
x 17
297,500.00
52.CEAG
PART NO: GHG5117304R0001
DESCRIPTION
The GHG-511-7304-R0001 is plug made of polyamide. Cable enty: Ø 8 - 19 mm (3-pole) / Ø 8 - 21 mm
(4-pole) / 12 - 21 mm (5-pole). Connecting terminals: 1 x 1.0 - 2.5 mm².
Plug - 16 A - 3 Pole - 110-130 V - 0.35 kg.
6,000.00
x 7
42,000.00
53. CONNECTOR PLUG 16 CONTACTS
PART NO: ZP20358PN
x 2
15. 54. APPLETON PLUGS EX TYPE
PART NO: ECP2023
SPECIFICATION: 20A, 125V
APPLETON ECP2023 ECP PLUG 20A 125V 2W,3P
https://www.grainger.com/product/APPLETON-ELECTRIC-Plug-20-A-Amps-11Y363
17,500.00
x 10
175,000.00
55. COOPER CROUSE HINDS
PART NO: APJ6385
APJ6385
Eaton Crouse-Hinds series Arktite APJ plug, 60A, 0.50-1.45", Two-wire, three-pole, 50-400 Hz, Style 2,
Copper-free aluminum, 600 Vac/250 Vdc
40,000.00
x 1
40,000.00
56. CEAG
PART NO: GHG5114304R3001
CEAG IP66 Surface Mount 2P+E Power Connector Socket ATEX, Rated At 16A, 130 V
17,500.00
x 11
192,500.00
56. CEAG
PART NO: GHG5114306R3001
Technical Specifications:
Cable Entry: 1 x plastic cable glands M25, 1 x M25 plastic Ex-screw plug
Connecting Terminals: 2 x 1.5 – 4.0 mm²
Current (A): 16A
Voltage (V): 200-250V
Frequency: up to 400 Hz
Material: Glass-fibre reinforced polyester
Ingress Protection (IP) rating: IP66
Operating Temperature: -20 °C up to +55 °C
Colour: Black
25,000.00
x 7
175,000.00