1) The document provides safety guidelines for working in a workshop, including proper manual lifting techniques. 2) It identifies hazards and accidents as potential dangers in a workshop environment and lists some common causes of accidents. 3) Safety guidelines are given to help make the workplace safe, such as keeping tools controlled, wearing appropriate clothing, cleaning spills, and using eye protection and the proper tool for each job.

1. PROPER SHOP
PRACTICES
autosharelearning101

2. • The state of being protected from
potential harm or something that
has been designed to protect and
prevent harm.
SAFETY
Accidents do happen, but as per experts,
accidents are caused and can be prevented.

3. Topics
• Hazards and Accidents
• Safety Guidelines to help make
your workplace safe
• Proper manual lifting

4. Hazard and Accidents
• A workshop is potentially a dangerous environment.
Hazard
• Any source of potential damage, harm or adverse health effects
on something or someone.
Accident
• An undesirable or unfortunate happening that occurs
unintentionally and usually results in harm, injury, damage, or
loss; casualty; mishap:

5. Accidents and it’s
Possible Causes

6. Accidents and it’s
Possible Causes

7. Accidents and it’s
Possible Causes

8. Accidents and it’s
Possible Causes

9. Accidents and it’s
Possible Causes

10. Safety Guidelines
1. Work quietly and give your full attention to the job you are
doing.
2. Keep your tools and equipment under control.
3. Keep jack handles out of the way, and stand the creeper
against the wall when not in use.
4. Never indulge in horseplay or other foolish action.
5. Never put screwdrivers or other sharp objects in your pocket.

11. Safety Guidelines
6. Make sure your clothes are right for the job.
7. Do not wear any accessories when working around moving
machinery or electrical equipment.
8. Wipe oil and grease off your hands and tools.
9. If you spill oil, grease, or any liquid on the floor, clean it up.
10. Never use compressed air to blow dirt from your clothes.

12. Safety Guidelines
11. Always wear eye protection when using liquid chemicals or
particles are flying about.
12. Watch out for sparks flying from a grinding wheel or a welding job.
13. When using a floor jack, position it properly.
14. Always use the right tool for the job.
15. Keep your hands away from the engine fan and accessory drive
belts when the engine is running.

13. Proper Manual Lifting
Manual Lifting
 Do not try to lift too much
weight. 20 kg is a safe limit for
one person.
 When lifting from the floor keep
the feet slightly apart, knees
bent, and back straight. Your leg
muscles should provide the
power to raise the load.

14. Proper Manual Lifting