Instruction
•Download as DOCX, PDF•
0 likes•239 views
The document contains safety guidelines for working on a construction site and in an office setting. It recommends wearing protective gear like helmets and clothing, using ladders and lifting machines carefully, paying attention to one's surroundings, keeping work areas organized and clear of hazards, operating tools and machinery safely, and following all posted safety instructions.
Report
Share
Report
Share
Recommended
15 workshop safety rules
The document outlines 15 safety rules for working in a workshop, including not running, wearing protective clothing like aprons and strong shoes, tying up long hair, rolling up sleeves, never working alone, wearing goggles when needed, turning off machines before cleaning, listening to teachers, knowing where emergency buttons are, paying attention during demonstrations, only one student operating machines at a time, only entering with permission, and reporting any machine damage.
Glass safety
The document discusses glass safety in the workplace. It recommends using personal protective equipment like gloves, gauntlets, safety glasses, and ear plugs to minimize injuries from handling glass. Gloves and gauntlets protect hands and forearms from cuts, safety glasses protect eyes from glass explosions or debris, and ear plugs reduce noise exposure. When handling glass, workers should wear gloves, pull glass slowly from casings, firmly grasp both sides, bend at the knees to lift, and gently place glass down to avoid common injuries like cuts, lacerations, and back strain.
Rules of safety while working in the workshop
The document provides safety guidelines for working in a laboratory or workshop, including wearing protective equipment like safety glasses and lab coats when needed, tying back long hair, avoiding loose clothing, washing hands before leaving, not eating or drinking in the workspace, cleaning up before leaving, and following additional precautions when using hazardous chemicals or sharp tools.
Haad height aware - eng
This manual provides guidance on working safely at heights for occupational health and safety professionals and supervisors. It covers definitions of working at heights, common risks such as falls from heights and falling objects, and best practices for prevention. The manual aims to help raise awareness of the dangers of working at heights and provide information on procedures and controls to prevent falls and injuries from working at heights. It addresses a variety of sectors where working at heights is common, such as construction, agriculture, industrial and commercial settings.
Recognizing unsafe conditions
Everyone is responsible for recognizing unsafe conditions like poor housekeeping, improper storage, lack of machine guarding or PPE that could lead to injury. When an unsafe condition is found, it should be corrected immediately if possible or reported to the appropriate authority, following up if the condition is not addressed. Preventing unsafe conditions requires looking for potential issues, reporting them, and taking action to avoid future risks.
Modelo de apr trabalho em altura blog segurança do trabalho
Este documento descreve uma Análise Preliminar de Risco (APR) para atividades de montagem e desmontagem de torres, confecção de andaimes e trabalhos noturnos. A APR detalha os riscos associados a cada etapa do trabalho e as medidas de controle necessárias para garantir a segurança dos trabalhadores, como o uso correto de EPIs e treinamento da equipe.
Dover ALS Safety Moment of the Week 07-Nov-2016
Know the Chemical Hazards and Hydrogen Sulfide! Alberta Oil Tool's #Safety Moments of the Week 07-Nov-2016
Dropped Objects (DROPS) Prevention
This presentation covers dropped objects, how we define dropped objects and understand their causes and consequences.
Topics covered include:
> Static Dropped Objects
> Dynamic Dropped Objects
> Working at height
> Hazard identification
Recommended
15 workshop safety rules
The document outlines 15 safety rules for working in a workshop, including not running, wearing protective clothing like aprons and strong shoes, tying up long hair, rolling up sleeves, never working alone, wearing goggles when needed, turning off machines before cleaning, listening to teachers, knowing where emergency buttons are, paying attention during demonstrations, only one student operating machines at a time, only entering with permission, and reporting any machine damage.
Glass safety
The document discusses glass safety in the workplace. It recommends using personal protective equipment like gloves, gauntlets, safety glasses, and ear plugs to minimize injuries from handling glass. Gloves and gauntlets protect hands and forearms from cuts, safety glasses protect eyes from glass explosions or debris, and ear plugs reduce noise exposure. When handling glass, workers should wear gloves, pull glass slowly from casings, firmly grasp both sides, bend at the knees to lift, and gently place glass down to avoid common injuries like cuts, lacerations, and back strain.
Rules of safety while working in the workshop
The document provides safety guidelines for working in a laboratory or workshop, including wearing protective equipment like safety glasses and lab coats when needed, tying back long hair, avoiding loose clothing, washing hands before leaving, not eating or drinking in the workspace, cleaning up before leaving, and following additional precautions when using hazardous chemicals or sharp tools.
Haad height aware - eng
This manual provides guidance on working safely at heights for occupational health and safety professionals and supervisors. It covers definitions of working at heights, common risks such as falls from heights and falling objects, and best practices for prevention. The manual aims to help raise awareness of the dangers of working at heights and provide information on procedures and controls to prevent falls and injuries from working at heights. It addresses a variety of sectors where working at heights is common, such as construction, agriculture, industrial and commercial settings.
Recognizing unsafe conditions
Everyone is responsible for recognizing unsafe conditions like poor housekeeping, improper storage, lack of machine guarding or PPE that could lead to injury. When an unsafe condition is found, it should be corrected immediately if possible or reported to the appropriate authority, following up if the condition is not addressed. Preventing unsafe conditions requires looking for potential issues, reporting them, and taking action to avoid future risks.
Modelo de apr trabalho em altura blog segurança do trabalho
Este documento descreve uma Análise Preliminar de Risco (APR) para atividades de montagem e desmontagem de torres, confecção de andaimes e trabalhos noturnos. A APR detalha os riscos associados a cada etapa do trabalho e as medidas de controle necessárias para garantir a segurança dos trabalhadores, como o uso correto de EPIs e treinamento da equipe.
Dover ALS Safety Moment of the Week 07-Nov-2016
Know the Chemical Hazards and Hydrogen Sulfide! Alberta Oil Tool's #Safety Moments of the Week 07-Nov-2016
Dropped Objects (DROPS) Prevention
This presentation covers dropped objects, how we define dropped objects and understand their causes and consequences.
Topics covered include:
> Static Dropped Objects
> Dynamic Dropped Objects
> Working at height
> Hazard identification
Constrution site
This handbook provides construction site workers with guidance on occupational safety and health. It outlines legal responsibilities and covers topics like keeping work areas tidy, using equipment safely, emergency response, personal protective equipment, and hygiene. The goal is to help prevent accidents by promoting safe work practices and awareness of hazards. Workers are advised to cooperate with safety rules and report any issues to supervisors.
Apr topografia
[1] A análise preliminar de riscos descreve os riscos associados ao carregamento de pedras e barros em uma obra, incluindo atropelamento, animais peçonhentos e postura inadequada. [2] Requisitos de EPI como capacete, óculos de segurança e colete refletivo são especificados. [3] Medidas de controle de riscos como sinalização, isolamento da área de trabalho e manutenção da postura correta são detalhadas.
Work at Height Training 3146- 23 Jan 2022
This document provides an agenda and guidelines for a training on work at height safety. The training covers topics like emergency procedures, definitions of work at height, ladder safety, roof safety, hazards and precautions. It also includes a quiz to test comprehension. General guidelines for the training include following COVID-19 precautions and not being distracted.
Construction safety pocket guide osha3252
This document discusses hazards and solutions for various safety issues in the construction industry. It addresses common hazards like falls, trench collapses, scaffolding failures, electrocutions, and more. For each hazard, it provides 2-3 potential solutions, such as using fall protection equipment, properly sloping trenches, inspecting scaffolding, and establishing lockout/tagout procedures for electrical work. The purpose is to educate construction workers about workplace dangers and how to prevent injuries and fatalities through safe practices.
Work at Height Awareness
Kindly see attached PowerPoint Awareness Presentation
Conducted on 3rd of Oct 2021 Time 09:15 am.
With AGNICE Subcontractor Al-Yarmouk
Construction safety
This document discusses construction safety. It identifies the main causes of accidents as unsafe work practices, physical conditions, or a lack of knowledge or skill. It outlines various preventative techniques including administrative policies and engineering controls. Specific safety issues covered include working at heights, ladder safety, excavation work, crane safety, traffic safety, and proper use of personal protective equipment. The document emphasizes that all accidents are preventable by prioritizing safety over expediency and making it a shared responsibility of all workers.
Work At Height
The document discusses the Work at Height Regulations in the UK. It notes that falls from height are a major cause of workplace fatalities and injuries. The regulations were introduced to improve safety by establishing a clear and consistent framework to manage risks associated with working at height. The regulations require hazards to be identified and risks to be properly assessed, controlled, and mitigated through measures such as proper planning, supervision, safe work equipment selection, inspection, and worker training.
Safe Usage Of PPE Toolbox Talk TBT 006.pdf
Toolbox Talk - Safe Usage Of PPE
PPE is last line of defence which means there is nothing between you and your PPE that will protect you from a Hazard.
Below are the ways in which PPE fails to Protect us are;
1. Wrong PPE:
Wearing only Light Eye Protection while grinding.
Use of PVC gloves when there is need of rubber gloves.
Using dust mask when vapor mask required.
2. Damaged of modified PPE:
Drilling holes in ear protection.
Removing vents from goggles.
Torn acid suit.
3. Not wearing specified PPE:
Not wearing goggles while drilling.
Not wearing gloves while lifting.
Not wearing ear defenders whilst grinding.
4. Wearing PPE incorrectly:
Safety helmet on backwards.
Overalls tied around waist.
Earplugs no inserted into ear canal.
5. Wearing contaminated PPE:
Tipping contamination on goggles into own eyes when removing.
Removing acid suit without decontaminating.
Using PPE not issued to you.
To counter these failures PPE should only be used if the individual is competent in its use. The individual has inspected the PPE. The individual has been made aware of the correct method of putting on and removing PPE.
Always do assessments to ensure you have the correct PPE for the job.
Personal protection is the last line of defence. It is personal to you.
If you abuse it, fail to use it or are given the wrong type it is only you who will be injured.
Follow below to avoid failure of PPE usage:
• In case of Doubt, ask for the same.
• Get PPE issued from authorised.
• Check it every-time before use.
• Wear it every-time.
• And last but not the least, if you take of your PPE then PPE will take care of you.
Ensure Safe Usage Of PPE to protect yourself from a Hazard.
Visit us to get full articles and more topics on Environment, Health, Fire And Safety at https://globalehs.co.in, you can also join us on social media to get instant update by subscribe/Join with the help of link given in the web site or by visiting below links.
Website: https://globalehs.co.in
LinkedIn: https://www.linkedin.com/company/globalehs
YouTube: https://youtube.com/channel/UCeUtB5v5Xv209bOE7cs16uw?sub_confirmation=1
Facebook: https://www.facebook.com/groups/5113594842063456
WhatsApp Group: https://chat.whatsapp.com/GMyJtKoq3Rf09cqB6WgvtI
Telegram Channel: https://t.me/globalehs
Twitter: https://twitter.com/Global_EHS1
Medium: https://medium.com/@connect.globalehs
Pinterest: https://in.pinterest.com/connectglobalehs/global-ehs/
Safety_induction
Site orientation for 098-C58 JIC Cooling Plant, Jubail Royal Commission.For power point slides please email me on dawoodibrar@hotmail.com
nearmiss.ppt
This document discusses the importance of investigating and reporting near miss incidents in order to prevent future accidents. It defines a near miss as an unexpected occurrence that just missed causing injury, damage, or an environmental release. Near misses provide warnings of what could happen if left unaddressed and allow companies to establish causes and corrective actions before a serious incident occurs. The document encourages extra effort to investigate all near misses so their causes can be determined and fixed to prevent future accidents. It also provides tips on encouraging near miss reporting among employees.
treinamento furadeira.pptx
1) O documento fornece instruções de segurança para o uso de furadeiras e parafusadeiras, incluindo cuidados com equipamentos elétricos, uso correto dos equipamentos, escolha de brocas, EPIs necessários e dicas para evitar acidentes.
2) São descritas as posições corretas do corpo ao usar as ferramentas e como guardá-las adequadamente após o uso.
3) É necessário treinamento específico, inspeção do equipamento antes do uso e não se deve realizar reparos.
Apr solda
Este documento fornece instruções de segurança para atividades como solda, montagem de andaimes e infraestrutura elétrica em tanques de armazenamento. Ele lista os equipamentos de proteção individual necessários e os procedimentos a serem seguidos para cada etapa do trabalho, visando prevenir acidentes como quedas, choques elétricos, queimaduras e cortes.
Ladder Safety by Marquette University
This document provides guidance on safely using portable ladders. It discusses selecting the proper ladder for the job, inspecting ladders for damage, setting up ladders at the proper angle, climbing ladders correctly using three points of contact, transporting and storing ladders, and common causes of ladder accidents like overreaching or failing to secure the ladder. The goal is to promote safe work practices to prevent falls and injuries when using ladders.
Eta Scaffold Training
Definition
Type of scaffolding system
To familiarize with UAE Legal requirements with respect to Scaffolds
To enhance the skill of scaffold erection and inspection.
Safe Procedure for erection & dismantling
Practical on Scaffold Erection & dismantling
Procedure for Scaffold inspection
DPL-SP - Safety Induction Presentation 00.pptx
This document provides safety guidelines for a construction project. It outlines various safety procedures and requirements, including:
- Requiring the use of personal protective equipment (PPE) like helmets and safety shoes.
- Emergency procedures like emergency contact numbers and evacuation plans in case of an emergency.
- Permit requirements for hazardous work like working at heights or in confined spaces.
- General safety guidelines around hazards like electricity, lifting equipment, ladders, scaffolds, excavations, hand tools, and vehicle operation.
Work At Height Regulations
The document discusses regulations around work at height in the UK. It outlines that falls from height are a major cause of workplace fatalities and injuries. The Work at Height Regulations of 2005 aim to reduce risks by requiring fall prevention plans, risk assessments, proper equipment selection, worker training, and prioritizing collective protection over personal protection. The regulations apply across various industries and seek to avoid work at height if possible and prevent falls through safe work planning, equipment, and procedures.
Trabalhos em altura epi´s
O documento discute trabalhos em altura e equipamentos de proteção individual (EPIs). Ele define trabalhos em altura, destaca que é uma das principais causas de acidentes fatais no trabalho e descreve atividades e recursos comuns nessa área. Também lista EPIs importantes como arneses de segurança e medidas de prevenção para andaimes, plataformas elevatórias e escadas.
SCAFFOLDING SAFETY WORKSHOP PPT.pdf
This document outlines a scaffold safety workshop conducted by the Loss Prevention Department. It covers proper scaffold safety procedures and requirements. The workshop agenda includes introductions, identifying scaffold components, inspecting and properly using fall protection equipment like harnesses and lanyards, scaffold inspection and tagging procedures, and general scaffold safety requirements. Exercises are also included to test knowledge of scaffold terminology and components.
Ladder safety
Over 1000 ladder-related deaths have occurred since 2000 according to OSHA statistics. The three largest risks when using ladders are falls, electrocutions from power lines, and ladders becoming unsecured. Proper planning and training can prevent these accidents. Employers must provide ladder safety training and ensure ladders are properly secured, maintained, and not overloaded before use.
Hand safety
Over 16 million people suffer hand injuries each year, with over a quarter million being serious or disabling. The most common type of injury is crushing or compression, and men are 9 times more likely to be injured than women. Many injuries involve a lack of protective equipment or unsafe practices around machinery. Following guidelines like using guards and proper tools, wearing protective equipment, and disconnecting power before repairs can help reduce risks to hands on the job.
Manual 59
The document provides instructions and information for using the BOSS ME-20 Guitar Multiple Effects unit. It outlines the main features of the unit which include simple operation like a pedal board, overdrive/distortion solo function, memory storage of 30 sounds, and battery power. It also details important notes on power supply, maintenance, and data handling. Sections describe the front and rear panel components and their functions. Troubleshooting tips are provided for low battery, no power, and no sound issues. Support information directs the user to the Boss website.
Instructions
The document provides 15 instructions for maintaining safety in an office environment. It advises learning and strictly following all safety rules of the office. It also recommends reading signs and instructions carefully before using any machines or equipment, asking for help if unsure how to operate something, and reporting any broken items.
More Related Content
What's hot
Constrution site
This handbook provides construction site workers with guidance on occupational safety and health. It outlines legal responsibilities and covers topics like keeping work areas tidy, using equipment safely, emergency response, personal protective equipment, and hygiene. The goal is to help prevent accidents by promoting safe work practices and awareness of hazards. Workers are advised to cooperate with safety rules and report any issues to supervisors.
Apr topografia
[1] A análise preliminar de riscos descreve os riscos associados ao carregamento de pedras e barros em uma obra, incluindo atropelamento, animais peçonhentos e postura inadequada. [2] Requisitos de EPI como capacete, óculos de segurança e colete refletivo são especificados. [3] Medidas de controle de riscos como sinalização, isolamento da área de trabalho e manutenção da postura correta são detalhadas.
Work at Height Training 3146- 23 Jan 2022
This document provides an agenda and guidelines for a training on work at height safety. The training covers topics like emergency procedures, definitions of work at height, ladder safety, roof safety, hazards and precautions. It also includes a quiz to test comprehension. General guidelines for the training include following COVID-19 precautions and not being distracted.
Construction safety pocket guide osha3252
This document discusses hazards and solutions for various safety issues in the construction industry. It addresses common hazards like falls, trench collapses, scaffolding failures, electrocutions, and more. For each hazard, it provides 2-3 potential solutions, such as using fall protection equipment, properly sloping trenches, inspecting scaffolding, and establishing lockout/tagout procedures for electrical work. The purpose is to educate construction workers about workplace dangers and how to prevent injuries and fatalities through safe practices.
Work at Height Awareness
Kindly see attached PowerPoint Awareness Presentation
Conducted on 3rd of Oct 2021 Time 09:15 am.
With AGNICE Subcontractor Al-Yarmouk
Construction safety
This document discusses construction safety. It identifies the main causes of accidents as unsafe work practices, physical conditions, or a lack of knowledge or skill. It outlines various preventative techniques including administrative policies and engineering controls. Specific safety issues covered include working at heights, ladder safety, excavation work, crane safety, traffic safety, and proper use of personal protective equipment. The document emphasizes that all accidents are preventable by prioritizing safety over expediency and making it a shared responsibility of all workers.
Work At Height
The document discusses the Work at Height Regulations in the UK. It notes that falls from height are a major cause of workplace fatalities and injuries. The regulations were introduced to improve safety by establishing a clear and consistent framework to manage risks associated with working at height. The regulations require hazards to be identified and risks to be properly assessed, controlled, and mitigated through measures such as proper planning, supervision, safe work equipment selection, inspection, and worker training.
Safe Usage Of PPE Toolbox Talk TBT 006.pdf
Toolbox Talk - Safe Usage Of PPE
PPE is last line of defence which means there is nothing between you and your PPE that will protect you from a Hazard.
Below are the ways in which PPE fails to Protect us are;
1. Wrong PPE:
Wearing only Light Eye Protection while grinding.
Use of PVC gloves when there is need of rubber gloves.
Using dust mask when vapor mask required.
2. Damaged of modified PPE:
Drilling holes in ear protection.
Removing vents from goggles.
Torn acid suit.
3. Not wearing specified PPE:
Not wearing goggles while drilling.
Not wearing gloves while lifting.
Not wearing ear defenders whilst grinding.
4. Wearing PPE incorrectly:
Safety helmet on backwards.
Overalls tied around waist.
Earplugs no inserted into ear canal.
5. Wearing contaminated PPE:
Tipping contamination on goggles into own eyes when removing.
Removing acid suit without decontaminating.
Using PPE not issued to you.
To counter these failures PPE should only be used if the individual is competent in its use. The individual has inspected the PPE. The individual has been made aware of the correct method of putting on and removing PPE.
Always do assessments to ensure you have the correct PPE for the job.
Personal protection is the last line of defence. It is personal to you.
If you abuse it, fail to use it or are given the wrong type it is only you who will be injured.
Follow below to avoid failure of PPE usage:
• In case of Doubt, ask for the same.
• Get PPE issued from authorised.
• Check it every-time before use.
• Wear it every-time.
• And last but not the least, if you take of your PPE then PPE will take care of you.
Ensure Safe Usage Of PPE to protect yourself from a Hazard.
Visit us to get full articles and more topics on Environment, Health, Fire And Safety at https://globalehs.co.in, you can also join us on social media to get instant update by subscribe/Join with the help of link given in the web site or by visiting below links.
Website: https://globalehs.co.in
LinkedIn: https://www.linkedin.com/company/globalehs
YouTube: https://youtube.com/channel/UCeUtB5v5Xv209bOE7cs16uw?sub_confirmation=1
Facebook: https://www.facebook.com/groups/5113594842063456
WhatsApp Group: https://chat.whatsapp.com/GMyJtKoq3Rf09cqB6WgvtI
Telegram Channel: https://t.me/globalehs
Twitter: https://twitter.com/Global_EHS1
Medium: https://medium.com/@connect.globalehs
Pinterest: https://in.pinterest.com/connectglobalehs/global-ehs/
Safety_induction
Site orientation for 098-C58 JIC Cooling Plant, Jubail Royal Commission.For power point slides please email me on dawoodibrar@hotmail.com
nearmiss.ppt
This document discusses the importance of investigating and reporting near miss incidents in order to prevent future accidents. It defines a near miss as an unexpected occurrence that just missed causing injury, damage, or an environmental release. Near misses provide warnings of what could happen if left unaddressed and allow companies to establish causes and corrective actions before a serious incident occurs. The document encourages extra effort to investigate all near misses so their causes can be determined and fixed to prevent future accidents. It also provides tips on encouraging near miss reporting among employees.
treinamento furadeira.pptx
1) O documento fornece instruções de segurança para o uso de furadeiras e parafusadeiras, incluindo cuidados com equipamentos elétricos, uso correto dos equipamentos, escolha de brocas, EPIs necessários e dicas para evitar acidentes.
2) São descritas as posições corretas do corpo ao usar as ferramentas e como guardá-las adequadamente após o uso.
3) É necessário treinamento específico, inspeção do equipamento antes do uso e não se deve realizar reparos.
Apr solda
Este documento fornece instruções de segurança para atividades como solda, montagem de andaimes e infraestrutura elétrica em tanques de armazenamento. Ele lista os equipamentos de proteção individual necessários e os procedimentos a serem seguidos para cada etapa do trabalho, visando prevenir acidentes como quedas, choques elétricos, queimaduras e cortes.
Ladder Safety by Marquette University
This document provides guidance on safely using portable ladders. It discusses selecting the proper ladder for the job, inspecting ladders for damage, setting up ladders at the proper angle, climbing ladders correctly using three points of contact, transporting and storing ladders, and common causes of ladder accidents like overreaching or failing to secure the ladder. The goal is to promote safe work practices to prevent falls and injuries when using ladders.
Eta Scaffold Training
Definition
Type of scaffolding system
To familiarize with UAE Legal requirements with respect to Scaffolds
To enhance the skill of scaffold erection and inspection.
Safe Procedure for erection & dismantling
Practical on Scaffold Erection & dismantling
Procedure for Scaffold inspection
DPL-SP - Safety Induction Presentation 00.pptx
This document provides safety guidelines for a construction project. It outlines various safety procedures and requirements, including:
- Requiring the use of personal protective equipment (PPE) like helmets and safety shoes.
- Emergency procedures like emergency contact numbers and evacuation plans in case of an emergency.
- Permit requirements for hazardous work like working at heights or in confined spaces.
- General safety guidelines around hazards like electricity, lifting equipment, ladders, scaffolds, excavations, hand tools, and vehicle operation.
Work At Height Regulations
The document discusses regulations around work at height in the UK. It outlines that falls from height are a major cause of workplace fatalities and injuries. The Work at Height Regulations of 2005 aim to reduce risks by requiring fall prevention plans, risk assessments, proper equipment selection, worker training, and prioritizing collective protection over personal protection. The regulations apply across various industries and seek to avoid work at height if possible and prevent falls through safe work planning, equipment, and procedures.
Trabalhos em altura epi´s
O documento discute trabalhos em altura e equipamentos de proteção individual (EPIs). Ele define trabalhos em altura, destaca que é uma das principais causas de acidentes fatais no trabalho e descreve atividades e recursos comuns nessa área. Também lista EPIs importantes como arneses de segurança e medidas de prevenção para andaimes, plataformas elevatórias e escadas.
SCAFFOLDING SAFETY WORKSHOP PPT.pdf
This document outlines a scaffold safety workshop conducted by the Loss Prevention Department. It covers proper scaffold safety procedures and requirements. The workshop agenda includes introductions, identifying scaffold components, inspecting and properly using fall protection equipment like harnesses and lanyards, scaffold inspection and tagging procedures, and general scaffold safety requirements. Exercises are also included to test knowledge of scaffold terminology and components.
Ladder safety
Over 1000 ladder-related deaths have occurred since 2000 according to OSHA statistics. The three largest risks when using ladders are falls, electrocutions from power lines, and ladders becoming unsecured. Proper planning and training can prevent these accidents. Employers must provide ladder safety training and ensure ladders are properly secured, maintained, and not overloaded before use.
Hand safety
Over 16 million people suffer hand injuries each year, with over a quarter million being serious or disabling. The most common type of injury is crushing or compression, and men are 9 times more likely to be injured than women. Many injuries involve a lack of protective equipment or unsafe practices around machinery. Following guidelines like using guards and proper tools, wearing protective equipment, and disconnecting power before repairs can help reduce risks to hands on the job.
What's hot (20)
Viewers also liked
Manual 59
The document provides instructions and information for using the BOSS ME-20 Guitar Multiple Effects unit. It outlines the main features of the unit which include simple operation like a pedal board, overdrive/distortion solo function, memory storage of 30 sounds, and battery power. It also details important notes on power supply, maintenance, and data handling. Sections describe the front and rear panel components and their functions. Troubleshooting tips are provided for low battery, no power, and no sound issues. Support information directs the user to the Boss website.
Instructions
The document provides 15 instructions for maintaining safety in an office environment. It advises learning and strictly following all safety rules of the office. It also recommends reading signs and instructions carefully before using any machines or equipment, asking for help if unsure how to operate something, and reporting any broken items.
Writing Manual
The document provides instructions for installing and using an Electrolux dishwasher. It recommends reading the manual before use and checking for any scratches or missing accessories when unpacking. Installation can be built-in or freestanding. It describes filling the salt and rinse aid, loading dishes correctly, selecting programs, and basic care and maintenance.
Print ad
The document is an advertisement for Apinya Beauty&Salon. The salon is experiencing fewer customers due to competition from other salons in the area. The advertisement aims to promote the salon's one-stop beauty services including hair, makeup, facials, manicures, and pedicures provided by professional stylists. The target market is women ages 18-50, especially teenagers and working women. The salon wants customers to know they can receive all beauty treatments and have their hairstyle designed specifically for them.
Copy platform
This document is an advertising plan for Pun Lak Fruit Smoothie Shop. It targets students and teachers at KMITL by highlighting the shop's low prices, good quality, and large selection of fruit smoothies. The advertising objectives are to promote the shop's fruit smoothies as being of good quality yet affordable for everyone to purchase. The creative theme and selling points focus on the smoothies' low price, high quality, and large quantities.
Copy platform+copy sheet 59
This document is an advertisement for The Custom Guitar and Bass Shop. The shop offers high quality woods, pickups, and other materials for customizing guitars and basses with over 300 design options. They provide special customization for left-handed players and certify all products for quality. Memberships are available for discounts on future purchases. The goal is to help musicians create their dream instruments at affordable prices, as an alternative to expensive brand name guitars that may not fully match their preferences.
Viewers also liked (6)
Similar to Instruction
Instruction 55030075
The document contains 30 safety instructions organized into two sections - 15 instructions for funny office safety and 15 instructions for Napo safe on site. The office safety instructions focus on behaviors like knocking before entering, keeping walkways clear, closing drawers, carrying objects carefully, avoiding injury on chairs, prohibiting smoking, using fire extinguishers, holding handrails on stairs, observing signs, picking up dropped items, reading safety materials, reporting damaged equipment, and avoiding tripping hazards from cords. The on-site safety instructions address behaviors like wearing helmets, appropriate attire, observing signs, using safety equipment at heights, utilizing scaffolds, cleaning work areas, orderly storage, general care, not lifting heavy objects alone, using machines to
Instructions for napo in safe on site
The document provides instructions for safety at both work sites and in offices. At work sites, it instructs workers to wear safety equipment like helmets, turn off machines when others are nearby, watch for hazards like glass, use safety harnesses for roof work, use the proper ladder for the task, provide emergency exits, keep walkways clear, use proper lifting technique, separate worker and vehicle paths, prohibit mobile devices, pay attention to avoid injuries, turn off machines after use, keep pets away, and not leave machines running unattended. In offices, it recommends knocking before entering rooms, keeping floors clear and clean, not using umbrellas, watching where you walk, keeping floors clear of cords, properly storing tools and
Instructions for Safety in the Construction Site
1. The document provides 15 safety instructions for workers in a construction site, including wearing protective gear like safety helmets and lifting sling belts, being aware of one's surroundings, keeping walkways clear, properly disposing of garbage, turning off electrical tools, and paying attention while walking.
2. It advises workers to look around before proceeding, be careful of objects being lifted, use correct lifting posture, and set up clear walking paths while watching out for vehicles.
3. The final tips are to carefully lock up after work, turn off and unplug electrical tools, cut off electricity before leaving, and watch out for invisible hazards.
Napo in safe on site
The document provides 15 safety instructions for workers at a construction site, including wearing a helmet and safety harness, watching for glass doors, cleaning walkways, using cranes for heavy lifting instead of workers, not walking in truck lanes or using phones while working, checking that gas and truck areas are locked, and always locking the site after work.
Office safe
This document contains safety guidelines for an office and construction site. For the office, it recommends always knocking before entering doors, being careful of wires and door frames, keeping floors dry and clutter-free, properly using and closing filing cabinets, and avoiding hazards like smoking, fire risks, and unstable office chairs. For the construction site, it suggests walking carefully, wearing protective gear like helmets, using ladders safely, balancing loads, knowing emergency procedures, properly operating equipment, and leaving areas clean and marked with safety signs.
Manufacturing tools and Safety precautions
Safety precautions outlines 16 rules for machine and workshop safety. It emphasizes that life is precious and those who do not follow safety rules risk harming themselves and others. The rules address keeping the workshop clean and clear of debris, ensuring safe electric connections, using protective gear like goggles and gloves for specific tasks, storing tools properly, keeping aisles clear, and maintaining first aid supplies.
Guide
This document provides safety guidelines for various tools and equipment commonly found in agricultural mechanics laboratories. It details proper procedures and safety precautions for using power tools like drills, saws, jointers and planers to prevent accidents and injuries. Specific guidelines are provided for welding equipment, compressed air, hand tools and more. Laboratory safety is emphasized, including wearing proper protective equipment and avoiding distractions or horseplay.
Safety guide
This document provides safety guidelines for agricultural laboratories and mechanics workshops. It outlines general safety rules regarding equipment use, personal protective equipment, tool safety, welding, and other hazardous activities. Specific guidelines are provided for power tools, compressed air, greenhouses, drills, sanders, saws, welders, and oxy-acetylene equipment. Students are instructed to follow all safety procedures and get permission before operating any machinery.
Proper Shop Practices
1) The document provides safety guidelines for working in a workshop, including proper manual lifting techniques.
2) It identifies hazards and accidents as potential dangers in a workshop environment and lists some common causes of accidents.
3) Safety guidelines are given to help make the workplace safe, such as keeping tools controlled, wearing appropriate clothing, cleaning spills, and using eye protection and the proper tool for each job.
The basic workshop rules
1. The document outlines basic safety rules and guidelines for working in an engineering workshop. Rules include never working alone or impaired, wearing proper protective equipment like safety glasses, and keeping the work area clean.
2. Specific safety tips are provided, such as securing loose clothing and jewelry away from machinery, using tools to avoid direct contact with sharp objects, and getting help for unfamiliar tools or processes.
3. General safety guidelines reinforce the proper use of safety equipment, keeping work areas clear of hazards, thinking through jobs completely before starting, and following precautions for hazardous materials.
6376882.ppt
The document outlines general safety rules for an engineering and technology lab, including developing a safe attitude by following all posted rules and signs, having respect for tools and equipment by only using them when instructed and keeping hands away from moving parts, preventing and controlling fires by knowing the location of fire extinguishers, wearing appropriate protective clothing like eye protection and closed-toe shoes, handling hazardous materials and waste safely, and maintaining a clean work area.
TLE_6_IA_PPT_Q4_-_Protocols_Processes_in_Making_Electrical_Gadgets.pptx
1. Strictly following steps when making electrical gadgets is important to avoid accidents and ensure quality output.
2. Safety measures that should be observed include avoiding contact with energized circuits, treating all devices as live, disconnecting power before repair, and using insulated tools and protective equipment.
3. Key safety steps when making extensions cords or doing electrical work at home include turning off the main power switch first before connecting wires or beginning any repair work.
Do's & dont's tool box talk -safety subject wise
The document provides guidance on safe material handling, both manual and mechanical. It lists dos and don'ts for proper lifting techniques, use of equipment like cranes, ladders, power tools, handling of chemicals and gases, and general housekeeping. It also provides guidance on what to do in emergency situations like fire or for providing first aid. Key recommendations include using mechanical handling where possible, inspecting all tools and equipment, following load limits, keeping work areas organized and hazard-free, and knowing emergency response procedures.
Safety
The document provides safety guidelines for working in a workshop. It lists numerous hazards to avoid such as loose clothing that could get caught in machinery, long hair near moving parts, jewelry, unsafe speeds or feeds on machines, distractions, horseplay, and compressed air. It also recommends using proper safety equipment like goggles and following procedures like stopping machines before cleaning or oiling. Good housekeeping, clear walkways, and hazard identification are important to maintain a safe working environment.
01a machine shop safety
The document discusses safety practices in a machine shop. It emphasizes the importance of personal grooming like wearing protective eye gear and closed-toe shoes. Safe work practices like locking out power sources before repairs, keeping hands away from moving parts, and lifting heavy objects properly are covered. Housekeeping such as cleaning machines before and after use and disposing oily rags safely is also discussed. The goal is to prevent injuries to workers and damage to equipment.
Lab safety
This document outlines various laboratory safety guidelines. It instructs students to wear protective equipment like safety goggles, tie back long hair, and keep work areas uncluttered. Chemicals should be handled carefully and mixed only with instructions. Glassware should not be used if cracked and hot objects require insulated gloves. In the event of injury, burns should be flushed with cold water, cuts pressed until bleeding stops, and eyes flushed with water if chemicals are present.
Important safety instructions for the steam cleaners
1. The document provides important safety instructions for using a steam cleaner, including reading all directions prior to use and only using water in the machine.
2. Users should unplug the steam cleaner when not in use or before opening the tank, and should not use if the cord or plug is damaged.
3. The instructions warn against various unsafe uses of the steam cleaner like using cleaning chemicals in it, directing the steam nozzle at people or animals, and not operating it on a level surface.
Lab safety (1)
The document provides safety guidelines for conducting experiments in a science lab. It outlines general safety rules regarding protective equipment, cleanliness, behavior and emergency procedures. Specific guidelines are given for working safely with glassware, chemicals, heat sources, electricity and first aid for common lab injuries. Students are instructed to follow all safety procedures carefully to prevent accidents in the lab.
Accident sequence, human factors
This document discusses human factors that contribute to workplace accidents. It identifies 10 categories of unsafe acts committed by workers: 1) operating without authority, 2) operating at unsafe speeds, 3) disabling safety devices, 4) using improper equipment or unsafe techniques, 5) unsafe loading or positioning of materials, 6) taking unsafe postures, 7) working on moving equipment unsafely, 8) distracting or startling others, 9) failing to use protective equipment, and 10) other miscellaneous unsafe acts. The document emphasizes that understanding why workers commit unsafe acts, due to factors like work environment and personal issues, can help safety managers prevent future accidents.
Similar to Instruction (20)
TLE_6_IA_PPT_Q4_-_Protocols_Processes_in_Making_Electrical_Gadgets.pptx
TLE_6_IA_PPT_Q4_-_Protocols_Processes_in_Making_Electrical_Gadgets.pptx
Tech. Livelihood Educ- Industrial Arts FEB 21.pptx
Tech. Livelihood Educ- Industrial Arts FEB 21.pptx
Do's & dont's tool box talk -safety subject wise
Do's & dont's tool box talk -safety subject wise
Important safety instructions for the steam cleaners
Important safety instructions for the steam cleaners
Recently uploaded
How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar KanvariaBBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
Community pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Recently uploaded (20)
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
Community pharmacy- Social and preventive pharmacy UNIT 5
Community pharmacy- Social and preventive pharmacy UNIT 5
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Instruction
- 1. Kriengsak Maolee 55030055 Sec 1 Napo in Safe on site 1. Always wear a safety helmet. 2. Wear protective clothing to avoid injury. 3. To avoid falling, use the ladder or the ladder lift machine to reach a high position. 4. Always arrange objects in work area. 5. Do not heavy objects with wrong posture because it can cause your back problem.6. Use a lifting machine to move heavy objects. 7. Be careful when using a mobile phone in work area. 8. Always lock the door in the work area when finish your work. 9. All switches must be turned off when you are not using them. 10. Never leave running electrical saw unattended. 11. Your workplace should have a pathway for pedestrians to avoid accident from car or truck in work area. 12. Beware of the car and truck in the site. 13. Do not use the machine unless you have received training. 14. Wear safety accessories when you are working on the high position. 15. Always follow the signs and cautions on the site. Funny Office Safety 1. Electronic plug should not be on the ground. 2. Avoid standing on the swivel chair. 3. To avoid injury, hold a sharp object carefully. 4. Never lit a fire in the office. 5. Read the label or manual carefully before using any instrument. 6. Lifting an object with wrong posture can cause an accident. 7. Before opening the door, make people on the other side know you are opening it by knocking the door. 8. Do not lean against the door to avoid injury. 9. Always close the cabinet.
- 2. Kriengsak Maolee 55030055 Sec 1 10. To avoid accident, do not leave any object on the pathway. 11. Always read the label on the extinguisher before using it, some extinguishers cannot be used in electrical fire. 12. Always follow the sign or instruction on the office. 13. To avoid fire accident, do not smoke in your office. 14. Do not swing the swivel chair when you are sitting. 15. Before using the stair, make sure that there is no object on the steps.