Projek rekabentuk
•Download as PPS, PDF•
1 like•653 views
The document outlines the schedule and components for a project presentation taking place from March 22nd to March 24th 2011. It lists various circuit readings and components to be tested including an open multi-meter reading, human finger resistance reading at 1.97M Ω, tap water resistance reading at 0.89M Ω, light triggered LDR, magnetic triggered reed switch with magnet, water triggered water sensor, and touch triggered touch pad.
Report
Share
Report
Share
![Project Presentation ,[object Object],[object Object],[object Object],[object Object],[object Object]](https://image.slidesharecdn.com/projek-110404095604-phpapp02/85/Projek-rekabentuk-1-320.jpg)
Recommended
LVDT based absorption hygrometer(Ijsrdv5 i110188)-Design by pranav navathe
This document describes an LVDT-based absorption hygrometer that measures moisture in the air. It works by using a hygroscopic material like human hair that contracts when it absorbs moisture from the air. This contraction pulls a pivoted arm linked to the core of an LVDT. The linear displacement of the LVDT core is then converted to a voltage signal and displayed digitally. The LVDT provides accurate, frictionless measurements with high response rate. Key components are the hygroscopic sensor, pivoted arm, tension spring, steel link, LVDT, and digital display. It offers improvements over traditional mechanical hygrometers in accuracy, response time, and reduced friction.
rekabentruk berbantu komputer Lab 4
This document provides instructions for a lab experiment on DC circuit analysis using PSpice simulation software. The experiment involves constructing circuits with independent and dependent sources and analyzing their DC characteristics by sweeping source voltages and currents. Key steps include plotting diode voltage and current under DC sweep, determining maximum power dissipation of a resistor under parametric sweep, and calculating the Thévenin equivalent circuit and current. The document also discusses DC analysis, dependent sources, parametric analysis, and methods for determining maximum power dissipation.
Projek rekabentuk1
This document outlines the requirements and guidelines for a group project in a Computer Aided Design course. The project involves designing a battery-operated circuit with a switching mechanism triggered by light, touch, magnetic, or water. Students must create a printed circuit board for the circuit using CAD software and fabricate it. They must test the physical circuit and compare results to simulations. Students will submit an interim seminar paper and final report that include the proposal, simulations, PCB design, analysis, and conclusions. The report provides detailed instructions on the content and formatting requirements for the seminar paper and final report.
8-bit PIC Microcontrollers
The document introduces Microchip's 8-bit PIC microcontrollers and describes their families and features. It discusses the PIC10F/12F, PIC16F and PIC18F families and their applications. It also describes starter kits, development tools and additional resources for working with 8-bit PIC MCUs. Microchip offers low-cost hardware and software solutions to meet various application needs such as automating garden watering.
Lab 3 microcontroller
The document provides instructions for a laboratory experiment on using functions, conditions, and hardware timers in a microcontroller program. Students will write code to control LED patterns using different button presses as well as use Timer0 to blink an LED at 1-second intervals. The experiment objectives are to understand programming with functions and conditions in C and learn how to use Timer0 as a hardware timer. Students will observe and test their programs in Proteus and on a development board.
Lab 6 microcontroller
This document provides instructions for a laboratory experiment on a PIC microcontroller involving EEPROM, analog to digital conversion, and LCD display. The objectives are to understand EEPROM, ADC functionality and configuration. Experiments include writing and reading EEPROM, reading analog voltage with ADC and displaying on LCD, and programming a digital thermometer to read temperature from a sensor. Circuits include EEPROM with LEDs and ADC reading a potentiometer voltage to display on LCD. Exercises involve writing to all EEPROM addresses, displaying measured voltages, and programming a temperature display.
Lab 5 microcontroller
This document provides instructions for an experiment on introducing stepper motors using a PIC microcontroller development board. It describes connecting a stepper motor to a motor driver circuit using a PIC16F877A microcontroller and programming it using MikroC to control the stepper motor's speed and direction by sequentially energizing its coil windings. The document explains stepper motor theory, driver circuits, connection configurations, stepping sequences and motor speed control through programming delays.
Lab 4 microcontroller
The document provides instructions for a laboratory experiment on using a keypad and LCD with a PIC microcontroller. Students will program the PIC to scan buttons on a 4x3 keypad and display the button values on LEDs. They will also write a program to display text on a 16x2 LCD and indicate when a button is pressed. The objectives, theory of operation, equipment, procedures, and report requirements are described to guide students in completing the exercises and documenting their results.
Recommended
LVDT based absorption hygrometer(Ijsrdv5 i110188)-Design by pranav navathe
This document describes an LVDT-based absorption hygrometer that measures moisture in the air. It works by using a hygroscopic material like human hair that contracts when it absorbs moisture from the air. This contraction pulls a pivoted arm linked to the core of an LVDT. The linear displacement of the LVDT core is then converted to a voltage signal and displayed digitally. The LVDT provides accurate, frictionless measurements with high response rate. Key components are the hygroscopic sensor, pivoted arm, tension spring, steel link, LVDT, and digital display. It offers improvements over traditional mechanical hygrometers in accuracy, response time, and reduced friction.
rekabentruk berbantu komputer Lab 4
This document provides instructions for a lab experiment on DC circuit analysis using PSpice simulation software. The experiment involves constructing circuits with independent and dependent sources and analyzing their DC characteristics by sweeping source voltages and currents. Key steps include plotting diode voltage and current under DC sweep, determining maximum power dissipation of a resistor under parametric sweep, and calculating the Thévenin equivalent circuit and current. The document also discusses DC analysis, dependent sources, parametric analysis, and methods for determining maximum power dissipation.
Projek rekabentuk1
This document outlines the requirements and guidelines for a group project in a Computer Aided Design course. The project involves designing a battery-operated circuit with a switching mechanism triggered by light, touch, magnetic, or water. Students must create a printed circuit board for the circuit using CAD software and fabricate it. They must test the physical circuit and compare results to simulations. Students will submit an interim seminar paper and final report that include the proposal, simulations, PCB design, analysis, and conclusions. The report provides detailed instructions on the content and formatting requirements for the seminar paper and final report.
8-bit PIC Microcontrollers
The document introduces Microchip's 8-bit PIC microcontrollers and describes their families and features. It discusses the PIC10F/12F, PIC16F and PIC18F families and their applications. It also describes starter kits, development tools and additional resources for working with 8-bit PIC MCUs. Microchip offers low-cost hardware and software solutions to meet various application needs such as automating garden watering.
Lab 3 microcontroller
The document provides instructions for a laboratory experiment on using functions, conditions, and hardware timers in a microcontroller program. Students will write code to control LED patterns using different button presses as well as use Timer0 to blink an LED at 1-second intervals. The experiment objectives are to understand programming with functions and conditions in C and learn how to use Timer0 as a hardware timer. Students will observe and test their programs in Proteus and on a development board.
Lab 6 microcontroller
This document provides instructions for a laboratory experiment on a PIC microcontroller involving EEPROM, analog to digital conversion, and LCD display. The objectives are to understand EEPROM, ADC functionality and configuration. Experiments include writing and reading EEPROM, reading analog voltage with ADC and displaying on LCD, and programming a digital thermometer to read temperature from a sensor. Circuits include EEPROM with LEDs and ADC reading a potentiometer voltage to display on LCD. Exercises involve writing to all EEPROM addresses, displaying measured voltages, and programming a temperature display.
Lab 5 microcontroller
This document provides instructions for an experiment on introducing stepper motors using a PIC microcontroller development board. It describes connecting a stepper motor to a motor driver circuit using a PIC16F877A microcontroller and programming it using MikroC to control the stepper motor's speed and direction by sequentially energizing its coil windings. The document explains stepper motor theory, driver circuits, connection configurations, stepping sequences and motor speed control through programming delays.
Lab 4 microcontroller
The document provides instructions for a laboratory experiment on using a keypad and LCD with a PIC microcontroller. Students will program the PIC to scan buttons on a 4x3 keypad and display the button values on LEDs. They will also write a program to display text on a 16x2 LCD and indicate when a button is pressed. The objectives, theory of operation, equipment, procedures, and report requirements are described to guide students in completing the exercises and documenting their results.
Lab 2 microcontroller
This document provides instructions for an experiment using a PIC development board. It includes:
1) An overview of the objectives which are to understand the development concept using the PICDEV board and learn how to download programs.
2) Details of the required equipment including the PICDEV board, MPLAB IDE software, and power supply.
3) Step-by-step procedures for communicating with the PICDEV board by connecting it to the computer and selecting the appropriate programmer in MPLAB.
Embedded system (Chapter 2) part 2
This document provides an overview of microcontroller architecture and assembly language programming. It discusses the following key points in 3 sentences:
The document introduces PIC microcontrollers and assembly language, noting that assembly language uses mnemonic instructions that must be translated to machine code by an assembler. It explains the assembling and linking process used to convert assembly code to machine code that can be burned into the PIC's program memory. Various PIC assembly language instructions are also described, including MOVLW, MOVWF, logic instructions, and bit manipulation instructions to set and clear bits on I/O ports.
Embedded system (Chapter 2) part A
The document discusses the architecture of PIC18 microcontrollers. It begins by introducing the PIC microcontroller family and noting their popularity. It then explains key aspects of the PIC18 architecture, including that it uses a Harvard architecture with separate memory spaces for instructions and data. The document outlines the main components of the PIC18 architecture, including the CPU, program ROM, data memory, I/O ports, and special function registers. It provides details on the registers used in the PIC18, including the working register WREG, general purpose registers, and special function registers.
Embedded system (Chapter 1)
This document provides an introduction to embedded systems and microcontrollers. It defines an embedded system as a computer system designed to perform a specific task and is contained within a larger system. Microcontrollers are described as the "brain" or central processing unit of an embedded system. Key points include:
- Microcontrollers integrate a processor, memory and input/output ports on a single chip, making embedded systems more compact and energy efficient than those using general purpose microprocessors.
- Embedded systems have a diverse range of applications from consumer electronics to industrial equipment to automobiles. Nearly every electronic device today contains one or more embedded systems.
- Microcontrollers are cheaper and better suited than microprocessors for many embedded applications as they require
Lab 1 microcontroller
This laboratory instruction sheet provides information on experiment 1, which introduces students to MPLAB, Proteus, and MicroC software. The objectives are for students to understand the basic operation and use of MPLAB, MicroC, and Proteus, use MPLAB and MicroC to write programs for PIC microcontrollers in assembly language and C, and use MPLAB SIM and Proteus to simulate programs. The procedures describe how to write and simulate a simple assembly language program using MPLAB that toggles an LED, and how to simulate the hex file of the program using Proteus.
Pic microcontroller step by step your complete guide
Pic microcontroller step by step your complete guideAshraf Said AlMadhoun - Educational Engineering Team
The PIC Microcontroller is an electronic device that is easy-to-use in both hardware and software. Sensing the environment by receiving inputs from many sensors, PIC Microcontroller affects its surroundings by controlling lights, motors, and a number of other accessories. It's intended for anyone making interactive hardware projects by connecting it with a power source, few leds and resistors.
This course is designed to introduce the PIC Microcontroller hardware and programming environment to get you started on building projects as soon as possible.
Unleash Your Inner Hero With this Course
-PIC Microcontroller Inner structure and Programming Introduction
-Leds, Resistors and Pushbuttons
-LCD Screens and Seven Segment Displays
-Motor and Keypad.
-DIY Projects and Quick Tips
A Tool for Creating Any Device Imaginable become a favorite of electronic Students and anyone interested in Device manufacturing because of their ease of use and extremely low cost.
Example projects include Ardupilot, a UAV platform able to control aerial drones.
Contents and Overview This course is designed for anyone interested in learning electronic design. No experience is required, and all you need is PIC Microcontroller and several low cost components.
With hours of content in many lectures, this course will take you from zero experience in electronics or programming to PIC Microcontroller Master.
Limited time offer
50% off
Join Today:https://goo.gl/WQIFNYChp4 introduction to the pic microcontroller copy
The document provides an introduction to the PIC microcontroller, including:
1) It describes the basic components and architecture of microcontrollers compared to microprocessors.
2) It outlines the history and features of the popular PIC microcontroller family from Microchip Technology, including the PIC16F84 model.
3) It explains the core components of the PIC16F84 including ports, memory organization, clock generator, and the central processing unit.
PIC-MICROCONTROLLER TUTORIALS FOR BEGINNERS
PIC microcontroller programming based on micro c IDE.Those who really want to build a base in microcontroller programming,just keep going through this. ;) :)
PIC MICROCONTROLLERS -CLASS NOTES
This material is meant for electronics students of SKU, R.U and other ECE students of ANNA University , Chennai
INTRODUCTION_TO_IC
This document provides an introduction to integrated circuits. It discusses the historical development of integrated circuits from transistors to modern chips containing billions of transistors. It explains different types of integrated circuits including SSI, MSI, LSI, VLSI, and ULSI. The document also covers important concepts in digital IC design such as noise margins, propagation delay, power consumption, and design metrics like functionality, cost, reliability, and performance.
Embedded system (Chapter )
The document discusses C programming for PIC microcontrollers. It covers the standard structure of a C program, including comments, header files, configuration bits, functions, and function bodies. It also discusses various C data types like unsigned char, signed char, unsigned int, and signed int. Examples are provided to illustrate how to use these data types and write C programs that toggle ports on a PIC microcontroller. The outcomes are for students to understand C programming languages for PIC18, the structure of C programs for PIC18, and common C data types used for PIC microcontrollers.
Coal Fired Power Plant
Coal Fired Power Plant
-Types of coal
-Traditional coal-burning power
plant
-Emission control for traditional
coal burning plant
-Advanced coal-burning power
plant
-Environmental effects of coal
Contoh kertas kerja program
Ini merupakan contoh kertas kerja untuk membuat program di universiti..
TIPS utk lulus kertas kerja program:
-Penggunaan VOT berdasarkan pekeliling yg lengkap.
-Mempunyai Kemahiran Insaniah (KI)
-Tentatif prgram yg lengkap
Foster-seely and Ratio Detector (Discriminator )
Copyright from modern electronic communication seventh edition gary m. miller & jeffry s. beasley
Communication Engineering - Chapter 6 - Noise
This document discusses various types of noise that can interfere with communication signals. It defines noise and categorizes it as either correlated noise, which depends on the presence of a signal, or uncorrelated noise, which is always present. Examples of uncorrelated noise sources include atmospheric noise from lightning, extraterrestrial noise from the sun and stars, industrial noise from machinery, thermal noise from component movement, and shot noise from random carrier arrival. The effects of noise on signals and ways to measure noise are also summarized.
Chapter 5 fm receivers
The document discusses several methods for demodulating frequency modulated (FM) signals in radio receivers, including slope detectors, balanced slope detectors, Foster-Seeley discriminators, ratio detectors, and phase-locked loops (PLLs). Slope detectors and balanced slope detectors convert FM signals to amplitude modulation (AM) using a tuned circuit before detecting the signal. Foster-Seeley discriminators and ratio detectors provide a more linear demodulation of FM signals compared to slope detectors. PLL FM demodulators do not require tuned circuits and can automatically compensate for carrier frequency instability. The output of these various FM demodulator circuits provides a signal proportional to the frequency deviation of the input FM signal.
The Electronic Hobby Kit
This document is a catalog listing 138 electronics hobby kits with brief descriptions. Each kit is assigned a unique identification code (KIT-XXX) and has its own page showing a picture and 1-2 sentence description of the project. The kits cover a wide range of electronics topics and difficulty levels, including LED projects, timers, counters, alarms, displays, power supplies, amplifiers and more.
Tutorial chapter 2 robotic
This chapter discusses industrial robot technology, including defining an industrial robot, areas of robot application, reasons for using robots over humans, basic robot components like the manipulator and end effector, types of actuators and sensors used, and functions of internal and external sensors. It also covers topics like orientation axes, work envelopes, and analog-to-digital conversion devices.
Dek3223 chapter 2 robotic
This document provides an overview of industrial robot technology, including its basic components and functions. It discusses the definition of industrial robots, as well as their typical applications in welding, painting, and pick and place operations. The six basic components of industrial robots are described as the manipulator, end effector, actuators, sensors, controller, and teach pendant. Common actuator types include electric motors, pneumatic cylinders, and hydraulic cylinders. Sensors are used to provide feedback and increase a robot's capabilities. The controller coordinates the robot's motions based on programmed instructions and sensor input. A teach pendant is used to teach locations to the robot controller during programming.
Chapter 3 am receivers
The document summarizes key components and concepts in AM radio receivers. It discusses AM demodulators like envelope detectors and product detectors. It then covers different receiver types like tuned radio frequency (TRF) receivers and superheterodyne receivers. For superheterodyne receivers, it describes the RF stage, mixer, local oscillator, intermediate frequency (IF) amplifier, detector, and audio frequency (AF) stage. It also defines important receiver parameters like selectivity, sensitivity, bandwidth improvement factor, and dynamic range.
Dek3223 chapter 3 industrial robotic
This document discusses the classification of industrial robots based on their arm geometry and degrees of freedom. It describes five basic robot manipulator configurations: rectangular, cylindrical, spherical, jointed arm (vertical), and SCARA (horizontal). Each configuration provides advantages and disadvantages in terms of reach, work envelope, and complexity. The document also covers the LERT classification system for robot joints and degrees of freedom. Finally, it discusses the main power sources used in robots, primarily electric power.
More Related Content
Viewers also liked
Lab 2 microcontroller
This document provides instructions for an experiment using a PIC development board. It includes:
1) An overview of the objectives which are to understand the development concept using the PICDEV board and learn how to download programs.
2) Details of the required equipment including the PICDEV board, MPLAB IDE software, and power supply.
3) Step-by-step procedures for communicating with the PICDEV board by connecting it to the computer and selecting the appropriate programmer in MPLAB.
Embedded system (Chapter 2) part 2
This document provides an overview of microcontroller architecture and assembly language programming. It discusses the following key points in 3 sentences:
The document introduces PIC microcontrollers and assembly language, noting that assembly language uses mnemonic instructions that must be translated to machine code by an assembler. It explains the assembling and linking process used to convert assembly code to machine code that can be burned into the PIC's program memory. Various PIC assembly language instructions are also described, including MOVLW, MOVWF, logic instructions, and bit manipulation instructions to set and clear bits on I/O ports.
Embedded system (Chapter 2) part A
The document discusses the architecture of PIC18 microcontrollers. It begins by introducing the PIC microcontroller family and noting their popularity. It then explains key aspects of the PIC18 architecture, including that it uses a Harvard architecture with separate memory spaces for instructions and data. The document outlines the main components of the PIC18 architecture, including the CPU, program ROM, data memory, I/O ports, and special function registers. It provides details on the registers used in the PIC18, including the working register WREG, general purpose registers, and special function registers.
Embedded system (Chapter 1)
This document provides an introduction to embedded systems and microcontrollers. It defines an embedded system as a computer system designed to perform a specific task and is contained within a larger system. Microcontrollers are described as the "brain" or central processing unit of an embedded system. Key points include:
- Microcontrollers integrate a processor, memory and input/output ports on a single chip, making embedded systems more compact and energy efficient than those using general purpose microprocessors.
- Embedded systems have a diverse range of applications from consumer electronics to industrial equipment to automobiles. Nearly every electronic device today contains one or more embedded systems.
- Microcontrollers are cheaper and better suited than microprocessors for many embedded applications as they require
Lab 1 microcontroller
This laboratory instruction sheet provides information on experiment 1, which introduces students to MPLAB, Proteus, and MicroC software. The objectives are for students to understand the basic operation and use of MPLAB, MicroC, and Proteus, use MPLAB and MicroC to write programs for PIC microcontrollers in assembly language and C, and use MPLAB SIM and Proteus to simulate programs. The procedures describe how to write and simulate a simple assembly language program using MPLAB that toggles an LED, and how to simulate the hex file of the program using Proteus.
Pic microcontroller step by step your complete guide
Pic microcontroller step by step your complete guideAshraf Said AlMadhoun - Educational Engineering Team
The PIC Microcontroller is an electronic device that is easy-to-use in both hardware and software. Sensing the environment by receiving inputs from many sensors, PIC Microcontroller affects its surroundings by controlling lights, motors, and a number of other accessories. It's intended for anyone making interactive hardware projects by connecting it with a power source, few leds and resistors.
This course is designed to introduce the PIC Microcontroller hardware and programming environment to get you started on building projects as soon as possible.
Unleash Your Inner Hero With this Course
-PIC Microcontroller Inner structure and Programming Introduction
-Leds, Resistors and Pushbuttons
-LCD Screens and Seven Segment Displays
-Motor and Keypad.
-DIY Projects and Quick Tips
A Tool for Creating Any Device Imaginable become a favorite of electronic Students and anyone interested in Device manufacturing because of their ease of use and extremely low cost.
Example projects include Ardupilot, a UAV platform able to control aerial drones.
Contents and Overview This course is designed for anyone interested in learning electronic design. No experience is required, and all you need is PIC Microcontroller and several low cost components.
With hours of content in many lectures, this course will take you from zero experience in electronics or programming to PIC Microcontroller Master.
Limited time offer
50% off
Join Today:https://goo.gl/WQIFNYChp4 introduction to the pic microcontroller copy
The document provides an introduction to the PIC microcontroller, including:
1) It describes the basic components and architecture of microcontrollers compared to microprocessors.
2) It outlines the history and features of the popular PIC microcontroller family from Microchip Technology, including the PIC16F84 model.
3) It explains the core components of the PIC16F84 including ports, memory organization, clock generator, and the central processing unit.
PIC-MICROCONTROLLER TUTORIALS FOR BEGINNERS
PIC microcontroller programming based on micro c IDE.Those who really want to build a base in microcontroller programming,just keep going through this. ;) :)
PIC MICROCONTROLLERS -CLASS NOTES
This material is meant for electronics students of SKU, R.U and other ECE students of ANNA University , Chennai
INTRODUCTION_TO_IC
This document provides an introduction to integrated circuits. It discusses the historical development of integrated circuits from transistors to modern chips containing billions of transistors. It explains different types of integrated circuits including SSI, MSI, LSI, VLSI, and ULSI. The document also covers important concepts in digital IC design such as noise margins, propagation delay, power consumption, and design metrics like functionality, cost, reliability, and performance.
Embedded system (Chapter )
The document discusses C programming for PIC microcontrollers. It covers the standard structure of a C program, including comments, header files, configuration bits, functions, and function bodies. It also discusses various C data types like unsigned char, signed char, unsigned int, and signed int. Examples are provided to illustrate how to use these data types and write C programs that toggle ports on a PIC microcontroller. The outcomes are for students to understand C programming languages for PIC18, the structure of C programs for PIC18, and common C data types used for PIC microcontrollers.
Viewers also liked (11)
Pic microcontroller step by step your complete guide
Pic microcontroller step by step your complete guide
More from mkazree
Coal Fired Power Plant
Coal Fired Power Plant
-Types of coal
-Traditional coal-burning power
plant
-Emission control for traditional
coal burning plant
-Advanced coal-burning power
plant
-Environmental effects of coal
Contoh kertas kerja program
Ini merupakan contoh kertas kerja untuk membuat program di universiti..
TIPS utk lulus kertas kerja program:
-Penggunaan VOT berdasarkan pekeliling yg lengkap.
-Mempunyai Kemahiran Insaniah (KI)
-Tentatif prgram yg lengkap
Foster-seely and Ratio Detector (Discriminator )
Copyright from modern electronic communication seventh edition gary m. miller & jeffry s. beasley
Communication Engineering - Chapter 6 - Noise
This document discusses various types of noise that can interfere with communication signals. It defines noise and categorizes it as either correlated noise, which depends on the presence of a signal, or uncorrelated noise, which is always present. Examples of uncorrelated noise sources include atmospheric noise from lightning, extraterrestrial noise from the sun and stars, industrial noise from machinery, thermal noise from component movement, and shot noise from random carrier arrival. The effects of noise on signals and ways to measure noise are also summarized.
Chapter 5 fm receivers
The document discusses several methods for demodulating frequency modulated (FM) signals in radio receivers, including slope detectors, balanced slope detectors, Foster-Seeley discriminators, ratio detectors, and phase-locked loops (PLLs). Slope detectors and balanced slope detectors convert FM signals to amplitude modulation (AM) using a tuned circuit before detecting the signal. Foster-Seeley discriminators and ratio detectors provide a more linear demodulation of FM signals compared to slope detectors. PLL FM demodulators do not require tuned circuits and can automatically compensate for carrier frequency instability. The output of these various FM demodulator circuits provides a signal proportional to the frequency deviation of the input FM signal.
The Electronic Hobby Kit
This document is a catalog listing 138 electronics hobby kits with brief descriptions. Each kit is assigned a unique identification code (KIT-XXX) and has its own page showing a picture and 1-2 sentence description of the project. The kits cover a wide range of electronics topics and difficulty levels, including LED projects, timers, counters, alarms, displays, power supplies, amplifiers and more.
Tutorial chapter 2 robotic
This chapter discusses industrial robot technology, including defining an industrial robot, areas of robot application, reasons for using robots over humans, basic robot components like the manipulator and end effector, types of actuators and sensors used, and functions of internal and external sensors. It also covers topics like orientation axes, work envelopes, and analog-to-digital conversion devices.
Dek3223 chapter 2 robotic
This document provides an overview of industrial robot technology, including its basic components and functions. It discusses the definition of industrial robots, as well as their typical applications in welding, painting, and pick and place operations. The six basic components of industrial robots are described as the manipulator, end effector, actuators, sensors, controller, and teach pendant. Common actuator types include electric motors, pneumatic cylinders, and hydraulic cylinders. Sensors are used to provide feedback and increase a robot's capabilities. The controller coordinates the robot's motions based on programmed instructions and sensor input. A teach pendant is used to teach locations to the robot controller during programming.
Chapter 3 am receivers
The document summarizes key components and concepts in AM radio receivers. It discusses AM demodulators like envelope detectors and product detectors. It then covers different receiver types like tuned radio frequency (TRF) receivers and superheterodyne receivers. For superheterodyne receivers, it describes the RF stage, mixer, local oscillator, intermediate frequency (IF) amplifier, detector, and audio frequency (AF) stage. It also defines important receiver parameters like selectivity, sensitivity, bandwidth improvement factor, and dynamic range.
Dek3223 chapter 3 industrial robotic
This document discusses the classification of industrial robots based on their arm geometry and degrees of freedom. It describes five basic robot manipulator configurations: rectangular, cylindrical, spherical, jointed arm (vertical), and SCARA (horizontal). Each configuration provides advantages and disadvantages in terms of reach, work envelope, and complexity. The document also covers the LERT classification system for robot joints and degrees of freedom. Finally, it discusses the main power sources used in robots, primarily electric power.
Chapter 3 am receivers
The document summarizes key components and concepts in AM radio receivers. It discusses AM demodulators like envelope detectors and product detectors used to recover the audio signal. It also describes the tuned radio frequency (TRF) receiver as the earliest design, and the superheterodyne receiver which overcomes TRF limitations by down-converting the RF signal to an intermediate frequency for amplification and detection. Key receiver parameters like selectivity, sensitivity, bandwidth and dynamic range are also defined which evaluate a receiver's performance.
Comm introduction
The document provides an overview of the topics that will be covered in the Communication Engineering course. The key topics include:
1) The basic elements of a communication system including transmitters, receivers, channels and noise.
2) A brief history of communication technologies from ancient times to modern digital technologies.
3) Descriptions of analog and digital communication systems and their differences.
4) Explanations of electromagnetic waves, the electromagnetic spectrum, and frequency allocations for different applications.
Chapter2 cont
The document discusses modulation index and amplitude modulation power signals. It defines modulation index as a measure of how much a carrier voltage is varied by a modulating signal. It distinguishes three types of AM based on modulation index: under modulated for m < 1, ideal AM for m = 1, and over modulated for m > 1. It also discusses calculating modulation index from AM waveforms and formulas for carrier power, sideband power, and total transmitted power in AM signals.
Chapter 2 amplitude_modulation
This document discusses amplitude modulation (AM) used in radio broadcasting. It describes the principles of AM including: imposing an information signal onto a carrier wave such that the carrier amplitude varies proportionally to the information signal. This creates sidebands above and below the carrier frequency. The bandwidth of an AM signal is equal to twice the highest modulating frequency. Circuits and examples are provided to illustrate AM modulation and demodulation.
Chapter5 dek 3143 dae 32303 9 (nota tambahan)
Single-phase motors are commonly used when 3-phase power is unavailable. There are several types of single-phase induction motors that differ in their starting mechanisms, including split-phase, capacitor-start, permanent split-capacitor, capacitor-start/capacitor-run, and shaded-pole motors. These motor types are suited for different applications depending on their starting torque, running efficiency, and cost.
120102011
This document contains 6 questions regarding electric machines:
1. Q1 asks about the generation of DC signals, the skewing of rotor cores in DC machines, and calculations involving a separately excited DC generator.
2. Q2 describes the operating principles of DC motors and involves calculations for a shunt motor including developed power, output power, torque, and efficiency.
3. Q3 explains transformer transformations and involves impedance calculations for a step-down transformer.
4. Q4 involves equations for the output power and torque of induction motors and calculations for a 3-phase induction motor involving input power, currents, speed, torque, and efficiency.
5. Q5 describes synchronous generator loading
Ii20102011
This document contains an examination for the course Electrical Machines and Drives held at Universiti Tun Hussein Onn Malaysia. It consists of 6 questions testing knowledge of various electric machines including DC machines, transformers, induction motors, synchronous generators, shaded pole motors and reluctance motors. Students are instructed to answer 4 questions out of the 6 in the 2 hour and 12 minute examination.
Chapter 4 synchronous machine
The document summarizes the synchronous machine. It describes how synchronous machines can operate as generators or motors and are used in large power applications. The rotor rotates at a constant synchronous speed and its magnetic field rotates in sync with the stator magnetic field. Common applications include power generation, pumps, timers and mills. The document then focuses on the synchronous generator, describing its construction, types of rotors and windings, voltage generation process, equivalent circuit model and phasor diagrams under different load conditions. An example problem is also included to illustrate voltage and current calculations.
More from mkazree (20)
Projek rekabentuk
- 2. Multi-Meter Open Circuit Reading
- 3. Human Finger Resistance Reading at 1.97M Ω
- 4. Tap Water Resistance Reading at 0.89M Ω
- 5. Light Triggered LDR
- 6. Magnetic Triggered Reed SW Magnet
- 7. Water Triggered Water Sensor
- 8. Touch Triggered Touch Pad