PROJECTS - TCE
•Download as DOCX, PDF•
0 likes•107 views
This document lists 4 power generation projects: a 500 MW thermal power station in Bellary, Karnataka; an 80 MW thermal power plant for Tata Projects Ltd.; a 4 x 3.6MW hydro power plant in Vietnam; and involvement in a 4 x 270 MW thermal power station for JSW Energy Limited in Jaigad.
Report
Share
Report
Share
Recommended
Presentation9 1-2011
The document describes the Solar CatcherTM concentrating solar power system, which uses parabolic dish technology equipped with a Brayton turbine specially designed for areas with medium solar insolation. The system aims to provide the most affordable, modular and scalable solar solution for utility-scale solar power. It can operate individually or be grouped, providing clean energy for small grids or utility-scale applications from 2-100 kW. The system includes options for energy storage like vanadium batteries to allow longer operation times from 6-24 hours.
Jaisalmer wind park rajasthan
The Jaisalmer Wind Park is India's 2nd largest operational onshore wind farm. This project located in Jaisalmer district, Rajasthan. The project, developed by Suzlon Energy.
Commission Date: August 2001
Type: Onshore
Installed Capacity: 1064 MW
SOLAR AND WIND HYBRID PRIORITY BASED POWER SUPPLY TO GRID
SOLAR AND WIND HYBRID PRIORITY BASED POWER SUPPLY TO GRID
Solar Catcher
The document describes the Solar CatcherTM, an advanced solar power conversion system that uses a Brayton cycle turbine with alternator for high efficiency. It can include optional energy storage like vanadium batteries for 24 hours of operation. The system has an efficiency over 30% with no piping needed and can operate at moderate turbine temperatures. It is designed for areas like Asia with medium solar insolation and hot, humid climates.
Must-hybrid-power-generation-station {wind turbine (hawt)&solar (pv)}
hybrid-power-generation-station {wind turbine (hawt)&solar (pv)}
To communicate
https://www.facebook.com/profile.php?id=100007667891034
01148362618
Final presentation
This document outlines a student project to design an efficient and cost-effective hybrid renewable power generation system. It includes group member names and an outline of the project modules. The objective is to address Pakistan's energy crisis through a system that uses wind and solar energy sources to power loads. The proposed system would include a horizontal axis wind turbine, solar panels, charge controller, batteries, inverter, and backup power from the grid. It aims to provide a reliable off-grid power solution without environmental hazards or reliance on limited fossil fuels.
Lavancha renewable energy presentation solar and wind hybrid power plant
With state-of-the-art hybrid technology that comes in the form of SolarMill that efficiently utilizes the potential of wind and sun energy in any climatic conditions, minimizing your carbon footprint becomes to breeze
Must hybrid power generation station {wind turbine(hawt)&solar (pv)}
This document contains the graduation project of four mechanical engineering students on the design of a hybrid power generation system combining wind turbines and solar PV. It includes 7 chapters that cover renewable energy sources, the design of a 5kW horizontal axis wind turbine using blade element theory and CFD, the design of a 600kW solar PV plant, the construction of a physical model, and the analysis of augmenting the wind turbine with a diffuser. The chapters include descriptions of the design process, calculations, simulation results, and diagrams of the system components. The overall aim is to develop an optimized hybrid power system for clean energy production.
Recommended
Presentation9 1-2011
The document describes the Solar CatcherTM concentrating solar power system, which uses parabolic dish technology equipped with a Brayton turbine specially designed for areas with medium solar insolation. The system aims to provide the most affordable, modular and scalable solar solution for utility-scale solar power. It can operate individually or be grouped, providing clean energy for small grids or utility-scale applications from 2-100 kW. The system includes options for energy storage like vanadium batteries to allow longer operation times from 6-24 hours.
Jaisalmer wind park rajasthan
The Jaisalmer Wind Park is India's 2nd largest operational onshore wind farm. This project located in Jaisalmer district, Rajasthan. The project, developed by Suzlon Energy.
Commission Date: August 2001
Type: Onshore
Installed Capacity: 1064 MW
SOLAR AND WIND HYBRID PRIORITY BASED POWER SUPPLY TO GRID
SOLAR AND WIND HYBRID PRIORITY BASED POWER SUPPLY TO GRID
Solar Catcher
The document describes the Solar CatcherTM, an advanced solar power conversion system that uses a Brayton cycle turbine with alternator for high efficiency. It can include optional energy storage like vanadium batteries for 24 hours of operation. The system has an efficiency over 30% with no piping needed and can operate at moderate turbine temperatures. It is designed for areas like Asia with medium solar insolation and hot, humid climates.
Must-hybrid-power-generation-station {wind turbine (hawt)&solar (pv)}
hybrid-power-generation-station {wind turbine (hawt)&solar (pv)}
To communicate
https://www.facebook.com/profile.php?id=100007667891034
01148362618
Final presentation
This document outlines a student project to design an efficient and cost-effective hybrid renewable power generation system. It includes group member names and an outline of the project modules. The objective is to address Pakistan's energy crisis through a system that uses wind and solar energy sources to power loads. The proposed system would include a horizontal axis wind turbine, solar panels, charge controller, batteries, inverter, and backup power from the grid. It aims to provide a reliable off-grid power solution without environmental hazards or reliance on limited fossil fuels.
Lavancha renewable energy presentation solar and wind hybrid power plant
With state-of-the-art hybrid technology that comes in the form of SolarMill that efficiently utilizes the potential of wind and sun energy in any climatic conditions, minimizing your carbon footprint becomes to breeze
Must hybrid power generation station {wind turbine(hawt)&solar (pv)}
This document contains the graduation project of four mechanical engineering students on the design of a hybrid power generation system combining wind turbines and solar PV. It includes 7 chapters that cover renewable energy sources, the design of a 5kW horizontal axis wind turbine using blade element theory and CFD, the design of a 600kW solar PV plant, the construction of a physical model, and the analysis of augmenting the wind turbine with a diffuser. The chapters include descriptions of the design process, calculations, simulation results, and diagrams of the system components. The overall aim is to develop an optimized hybrid power system for clean energy production.
Hybrid solar wind power generation system
A simple introduction to Hybrid solar wind power generation System.In this system we use both wind and solar power generation devices.Here wind turbine is inter connected with solar panel.so that it can generate power in both ways.It gives power in night time and works efficiently.As per availability of sun rise and wind it can generate power.The power generated is given to the load.Its efficiency is high and eco-friendly.
Hybrid power
This document describes a hybrid power generation system that uses both wind and solar energy. It begins with an overview that electricity demand is increasing and conventional energy sources are unsustainable, so alternative sources like wind and solar are needed. It then provides details on the system components - solar panels to convert solar energy, wind turbines for wind energy, batteries to store energy, and an inverter to convert DC to AC power. Equations to calculate the power generated from each source and total system cost are also presented. The conclusion states that a hybrid system provides a reliable, efficient and affordable solution for electricity generation.
Solar Based Grass Cutter Machine Paper
This document describes a solar-powered grass cutting machine. It uses a 10W solar panel to charge a 12V battery, which then powers four DC motors - two for movement and two attached to cutting blades. An Atmega8 microcontroller controls the motors and uses an ultrasonic sensor to detect obstacles and change the machine's direction. The system is designed to be automated, pollution-free, and powered by renewable solar energy instead of gasoline or electricity from the grid. It aims to provide an efficient grass cutting solution without issues of power availability, fuel consumption, or emissions.
Concentrated photovoltaics
Concentrator photovoltaics (CPV) uses lenses and mirrors to focus sunlight onto highly efficient multi-junction solar cells. It concentrates sunlight to increase efficiency and reduce cell area needs. Concentration ratio is defined as the ratio of collector to receiver area. CPV offers potential for cost reduction and enhanced efficiency through concentration. Common optics include flat plates with boosters, compound parabolic concentrators, parabolic reflectors, and Fresnel lenses. CPV systems are classified as low, medium, or high concentration based on their concentration ratios and required tracking and cooling.
IRJET- Hybrid Power Generation by using Vertical Axis Wind Turbine and So...
This document proposes a hybrid power generation system using a vertical axis wind turbine and solar panels. The system aims to harness wind energy from passing vehicles on a highway using a vertical axis wind turbine. Solar panels are also included to increase the system's efficiency. The electricity generated from both sources is stored in batteries and can be used for street lighting. The system has the benefits of being environmentally friendly and reducing reliance on non-renewable energy sources. It discusses the working of vertical axis wind turbines and solar panels, provides a block diagram of the system, and concludes that the hybrid energy source is an effective solution for continuous power generation.
Solar PV design and installation
This document summarizes the basics of solar PV systems and provides an example design. It discusses key components like solar panels, batteries, charge controllers and inverters. It then walks through the steps to size a system for a sample power consumption of 860 Watts per day, accounting for losses. The design calls for 2 solar panels providing 1500 Watt-hours each, 4 batteries providing 150 Amp-hours each, a 1.2 kW inverter, and a 25-30 Amp charge controller.
Design & febrication of solar automated grass cutter
The document summarizes a student project to design and fabricate an automated solar-powered lawn mower. It includes an introduction describing the motivation to reduce noise and air pollution from gas-powered mowers. It then outlines the objectives, components, programming, and fabrication process. The components include a solar panel, battery, motors, blades, and an Arduino board. It is programmed using Arduino code and assembled on a chassis. The project aims to provide an environmentally friendly alternative to gas-powered lawn mowers.
Rajjjjjjjjj2222
This document describes a solar-powered grass cutter. It discusses the working principle, components, and diagrams of the grass cutter. The grass cutter is powered by solar panels that charge a battery. It uses DC motors to move the grass cutter body and power the cutting blades. The grass cutter does not require fuel and has less maintenance than gas-powered cutters, making it more environmentally friendly. However, it is manually operated and blades may fail. The document provides this information to explain the project and its advantages over traditional gas-powered grass cutters.
Solar system design
Designed a complete system of solar cell arrays required for a commercial complex. Researched and derived mathematical equations to install the system using given budget constraints. Made CAD drawings of the arrangement of inverter arrays required for installing the system.
Solar rooftop power plant
Shri Shakti Alternative Energy Limited uses solar panels that convert sunlight into electricity which is transferred through an inverter and then a power transfer switch to an energy meter before being supplied to the electrical grid. A diesel generator serves as backup power generation.
Solar Water Heating Systems by United Energy Systems, Thane
United Energy Systems was formed by an energetic team, having a great deal of experience in the Renewable & innovative Energy systems such as Solar Photovoltaic Systems, Solar Thermal Systems, Solar LED Lighting Systems for Industrial, Real Estate, Domestic / Household Sector. Since then United Energy Systems are working with technological leaders in Renewable Energy Sec-tors such as Redren Energy, Vikrom Solar, SMA, Su-Kam.
Hybrid power generation by and solar –wind
With the development of industry and
agriculture, a great amount of energy such as coal, oil
and gas has been consumed in the world. Extensive
use of these fossil energies deteriorates a series of
problems like energy crisis, environmental pollution
and so on. Everybody knows that the fossil energy
reserves are finite, some day it will be exhausted.
It is possible that the world will face a
global energy crisis due to a decline in the
availability of cheap oil and recommendations to a
decreasing dependency on fossil fuel. This has led to
increasing interest in alternate power/fuel research
such as fuel cell technology, hydrogen fuel, biodiesel,
Karrick process, solar energy, geothermal energy,
tidal energy and wind. Today, solar energy and wind
energy have significantly alternated fossil fuel with
big ecological problems.
With the development of the science and
technology, power generation using solar energy and
wind power is gradually known by more and more
people. And it is widespread used in many developed
countries. The merits of the solar and wind power
generation are very obvious-infinite and nonpolluting.
The raw materials of the solar and wind
power generation derived from nature, and wind
power generation can work twenty-four hours a day,
solar power generation only works by daylight. In
addition, this kind of power generation has no
exhaust emission and there is no influence to the
nature. But it also has some shortcomings. Because
of the imperfect of the technology, equipment of the
solar and wind power generation is very expensive.
By far, it cannot be widely used.
In addition, solar and wind power
generation system affected by the changing of the
weather very much, so it has obvious defects in
reliability compared with fossil fuel, and it is difficult
to make it fit for practical use the lack of economical
efficiency .Because of these problems it needs to
increase the reliability of energy supply by
developing a system which interacts Solar and wind
energy. This kind of system is usually called windsolar
hybrid power generation system significantly
Final Year Project WSE
This document presents a project report on a mobile charging system using hybrid solar energy. It was submitted by three students to partially fulfill the requirements for a Bachelor of Technology degree in Electrical and Electronics Engineering.
The system uses both solar panels and wind turbines to generate electricity. The solar panels convert sunlight to DC current, while the wind turbines use wind power to rotate a generator and produce DC current. Both sources charge a circuit board simultaneously that is used to charge connected mobile phones. A digital clock and temperature display are also included.
The report includes an abstract, table of contents, introduction on renewable energy and hybrid power systems, literature review on solar, wind and hybrid systems, methodology and implementation details, results from testing, and
A report on Solar Load Calculation
In this paper we study how to establish photovoltaic solar power plant Design as well as calculation of power production, base on that to further we find recommendation and techniques to optimized cost of PV solar power plant. To establishment of green and sustainable development of solar PV power plant to reduce a burden of state electricity board.
Thermal power-plant
Thermal power plants generate 65% of India's total power. This document describes the Yamunanagar Thermal Power Project located in Yamunanagar, Haryana, which has a total capacity of 600 MW from its two operating units of 300 MW each. It discusses the key components of the plant including the boiler, furnace, turbine, super heater, reheater, PA fan, FD fan, ID fan, and cooling tower. It also outlines the main functions in the plant related to coal, steam, water, and ash handling and provides diagrams of the operational features inside the power plant.
SOLAR PROJECTS ABSTRACT-Wind solar energy -hybrid power generation system (wise)
This document discusses a hybrid wind-solar energy system for residential power generation. It introduces renewable energy sources like wind and solar. For wind power, it describes typical wind turbine sizes from 600 kW to 5 MW. For solar energy, it explains the use of photovoltaics and concentrated solar power. The system demonstrated combines a 3W solar panel and 18W wind turbine to provide continuous power to a home. A microcontroller monitors the voltages and switches the power supply accordingly between the wind and solar sources to the battery.
Must ppt
This document presents a project on developing a hybrid power plant using vertical-axis wind turbines and solar panels. The aim is to provide a renewable energy source for electricity in remote, off-grid areas. A prototype was designed and built that uses a VAWT to generate AC voltage which is rectified to DC to charge batteries. Solar panels also generate DC voltage. A switch assembly allows power from the VAWT and solar panels to combine or be used individually to power a DC motor. The system provides a reliable renewable energy source and energy storage for locations without access to the electric grid.
installation of grid solar panel of electrical department
This document summarizes a project on installing a 600-watt solar power system at RTU Kota. It includes an introduction, background on solar power in India and Rajasthan, components of the solar system including panels, charge controller, inverter and batteries. It provides schematics, calculations for sizing components, cost analysis showing return on investment within 5 years, and advantages like reduced bills, pollution-free power, and potential for panel recycling.
DESIGN & ANALYSIS OF MAGNETIC REPULSION VERTICAL AXIS WIND TURBINEPresentation
FINAL YEAR ENGINEERING. PROJECT ON DESIGN & ANALYSIS OF MAGNETIC REPULSION VERTICAL AXIS WIND TURBINE.
We intend to use the cheapest available sources as raw material for constructing a power generation VAWT’s unit which can be used as a source of electricity for Powering so as to make it cost-effective. Analysis of VAWT includes
Hybrid power generation by solar –wind
With the development of industry and
agriculture, a great amount of energy such as coal, oil
and gas has been consumed in the world. Extensive
use of these fossil energies deteriorates a series of
problems like energy crisis, environmental pollution
and so on. Everybody knows that the fossil energy
reserves are finite, some day it will be exhausted.
It is possible that the world will face a
global energy crisis due to a decline in the
availability of cheap oil and recommendations to a
decreasing dependency on fossil fuel. This has led to
increasing interest in alternate power/fuel research
such as fuel cell technology, hydrogen fuel, biodiesel,
Karrick process, solar energy, geothermal energy,
tidal energy and wind. Today, solar energy and wind
energy have significantly alternated fossil fuel with
big ecological problems.
With the development of the science and
technology, power generation using solar energy and
wind power is gradually known by more and more
people. And it is widespread used in many developed
countries. The merits of the solar and wind power
generation are very obvious-infinite and nonpolluting.
The raw materials of the solar and wind
power generation derived from nature, and wind
power generation can work twenty-four hours a day,
solar power generation only works by daylight. In
addition, this kind of power generation has no
exhaust emission and there is no influence to the
nature. But it also has some shortcomings. Because
of the imperfect of the technology, equipment of the
solar and wind power generation is very expensive.
By far, it cannot be widely used.
In addition, solar and wind power
generation system affected by the changing of the
weather very much, so it has obvious defects in
reliability compared with fossil fuel, and it is difficult
to make it fit for practical use the lack of economical
efficiency .Because of these problems it needs to
increase the reliability of energy supply by
developing a system which interacts Solar and wind
energy. This kind of system is usually called windsolar
hybrid power generation system significantly
Input output , heat rate characteristics and Incremental cost
This document discusses the input-output, heat rate, and incremental cost characteristics of thermal power plants. It defines input-output characteristics as a plot of fuel input versus power output. Heat rate is the ratio of fuel input to energy output and is the slope of the input-output curve. An incremental fuel rate curve plots the incremental fuel rate, or change in input divided by change in output, versus output. The incremental cost curve multiplies incremental fuel rate by fuel cost to determine incremental cost in monetary terms per unit of output. Economic dispatch of power plants aims to minimize total incremental costs while meeting demand.
Power plant performance_efficiency
Power Plant Performance/Efficiency Monitoring Tool -
Especially for them who really want to work with Efficiency monitoring, This Spread sheet include Boiler Efficiency (ASME PTC 4.0, 2008), Turbine Efficiency (ASME PTC 6.0, 1998), APH Performance (ASME PTC 4.3), Auxiliary Power Consumption (APC) moreover it generate plant MIS As well as complete report.
If you want to download in Spreadsheet/excel format.
http://www.scribd.com/doc/157799307/Power-Plant-Performance-Efficiency-Monitoring-Tool
ज्ञान प्राप्त करने के तीन तरीके है. पहला चिंतन जो सबसे सही तरीका है. दूसरा अनुकरण जो सबसे आसान तरीका है और तीसरा अनुभव जो सबसे कष्टकारी है ~ कन्फ्यूसियस
More Related Content
What's hot
Hybrid solar wind power generation system
A simple introduction to Hybrid solar wind power generation System.In this system we use both wind and solar power generation devices.Here wind turbine is inter connected with solar panel.so that it can generate power in both ways.It gives power in night time and works efficiently.As per availability of sun rise and wind it can generate power.The power generated is given to the load.Its efficiency is high and eco-friendly.
Hybrid power
This document describes a hybrid power generation system that uses both wind and solar energy. It begins with an overview that electricity demand is increasing and conventional energy sources are unsustainable, so alternative sources like wind and solar are needed. It then provides details on the system components - solar panels to convert solar energy, wind turbines for wind energy, batteries to store energy, and an inverter to convert DC to AC power. Equations to calculate the power generated from each source and total system cost are also presented. The conclusion states that a hybrid system provides a reliable, efficient and affordable solution for electricity generation.
Solar Based Grass Cutter Machine Paper
This document describes a solar-powered grass cutting machine. It uses a 10W solar panel to charge a 12V battery, which then powers four DC motors - two for movement and two attached to cutting blades. An Atmega8 microcontroller controls the motors and uses an ultrasonic sensor to detect obstacles and change the machine's direction. The system is designed to be automated, pollution-free, and powered by renewable solar energy instead of gasoline or electricity from the grid. It aims to provide an efficient grass cutting solution without issues of power availability, fuel consumption, or emissions.
Concentrated photovoltaics
Concentrator photovoltaics (CPV) uses lenses and mirrors to focus sunlight onto highly efficient multi-junction solar cells. It concentrates sunlight to increase efficiency and reduce cell area needs. Concentration ratio is defined as the ratio of collector to receiver area. CPV offers potential for cost reduction and enhanced efficiency through concentration. Common optics include flat plates with boosters, compound parabolic concentrators, parabolic reflectors, and Fresnel lenses. CPV systems are classified as low, medium, or high concentration based on their concentration ratios and required tracking and cooling.
IRJET- Hybrid Power Generation by using Vertical Axis Wind Turbine and So...
This document proposes a hybrid power generation system using a vertical axis wind turbine and solar panels. The system aims to harness wind energy from passing vehicles on a highway using a vertical axis wind turbine. Solar panels are also included to increase the system's efficiency. The electricity generated from both sources is stored in batteries and can be used for street lighting. The system has the benefits of being environmentally friendly and reducing reliance on non-renewable energy sources. It discusses the working of vertical axis wind turbines and solar panels, provides a block diagram of the system, and concludes that the hybrid energy source is an effective solution for continuous power generation.
Solar PV design and installation
This document summarizes the basics of solar PV systems and provides an example design. It discusses key components like solar panels, batteries, charge controllers and inverters. It then walks through the steps to size a system for a sample power consumption of 860 Watts per day, accounting for losses. The design calls for 2 solar panels providing 1500 Watt-hours each, 4 batteries providing 150 Amp-hours each, a 1.2 kW inverter, and a 25-30 Amp charge controller.
Design & febrication of solar automated grass cutter
The document summarizes a student project to design and fabricate an automated solar-powered lawn mower. It includes an introduction describing the motivation to reduce noise and air pollution from gas-powered mowers. It then outlines the objectives, components, programming, and fabrication process. The components include a solar panel, battery, motors, blades, and an Arduino board. It is programmed using Arduino code and assembled on a chassis. The project aims to provide an environmentally friendly alternative to gas-powered lawn mowers.
Rajjjjjjjjj2222
This document describes a solar-powered grass cutter. It discusses the working principle, components, and diagrams of the grass cutter. The grass cutter is powered by solar panels that charge a battery. It uses DC motors to move the grass cutter body and power the cutting blades. The grass cutter does not require fuel and has less maintenance than gas-powered cutters, making it more environmentally friendly. However, it is manually operated and blades may fail. The document provides this information to explain the project and its advantages over traditional gas-powered grass cutters.
Solar system design
Designed a complete system of solar cell arrays required for a commercial complex. Researched and derived mathematical equations to install the system using given budget constraints. Made CAD drawings of the arrangement of inverter arrays required for installing the system.
Solar rooftop power plant
Shri Shakti Alternative Energy Limited uses solar panels that convert sunlight into electricity which is transferred through an inverter and then a power transfer switch to an energy meter before being supplied to the electrical grid. A diesel generator serves as backup power generation.
Solar Water Heating Systems by United Energy Systems, Thane
United Energy Systems was formed by an energetic team, having a great deal of experience in the Renewable & innovative Energy systems such as Solar Photovoltaic Systems, Solar Thermal Systems, Solar LED Lighting Systems for Industrial, Real Estate, Domestic / Household Sector. Since then United Energy Systems are working with technological leaders in Renewable Energy Sec-tors such as Redren Energy, Vikrom Solar, SMA, Su-Kam.
Hybrid power generation by and solar –wind
With the development of industry and
agriculture, a great amount of energy such as coal, oil
and gas has been consumed in the world. Extensive
use of these fossil energies deteriorates a series of
problems like energy crisis, environmental pollution
and so on. Everybody knows that the fossil energy
reserves are finite, some day it will be exhausted.
It is possible that the world will face a
global energy crisis due to a decline in the
availability of cheap oil and recommendations to a
decreasing dependency on fossil fuel. This has led to
increasing interest in alternate power/fuel research
such as fuel cell technology, hydrogen fuel, biodiesel,
Karrick process, solar energy, geothermal energy,
tidal energy and wind. Today, solar energy and wind
energy have significantly alternated fossil fuel with
big ecological problems.
With the development of the science and
technology, power generation using solar energy and
wind power is gradually known by more and more
people. And it is widespread used in many developed
countries. The merits of the solar and wind power
generation are very obvious-infinite and nonpolluting.
The raw materials of the solar and wind
power generation derived from nature, and wind
power generation can work twenty-four hours a day,
solar power generation only works by daylight. In
addition, this kind of power generation has no
exhaust emission and there is no influence to the
nature. But it also has some shortcomings. Because
of the imperfect of the technology, equipment of the
solar and wind power generation is very expensive.
By far, it cannot be widely used.
In addition, solar and wind power
generation system affected by the changing of the
weather very much, so it has obvious defects in
reliability compared with fossil fuel, and it is difficult
to make it fit for practical use the lack of economical
efficiency .Because of these problems it needs to
increase the reliability of energy supply by
developing a system which interacts Solar and wind
energy. This kind of system is usually called windsolar
hybrid power generation system significantly
Final Year Project WSE
This document presents a project report on a mobile charging system using hybrid solar energy. It was submitted by three students to partially fulfill the requirements for a Bachelor of Technology degree in Electrical and Electronics Engineering.
The system uses both solar panels and wind turbines to generate electricity. The solar panels convert sunlight to DC current, while the wind turbines use wind power to rotate a generator and produce DC current. Both sources charge a circuit board simultaneously that is used to charge connected mobile phones. A digital clock and temperature display are also included.
The report includes an abstract, table of contents, introduction on renewable energy and hybrid power systems, literature review on solar, wind and hybrid systems, methodology and implementation details, results from testing, and
A report on Solar Load Calculation
In this paper we study how to establish photovoltaic solar power plant Design as well as calculation of power production, base on that to further we find recommendation and techniques to optimized cost of PV solar power plant. To establishment of green and sustainable development of solar PV power plant to reduce a burden of state electricity board.
Thermal power-plant
Thermal power plants generate 65% of India's total power. This document describes the Yamunanagar Thermal Power Project located in Yamunanagar, Haryana, which has a total capacity of 600 MW from its two operating units of 300 MW each. It discusses the key components of the plant including the boiler, furnace, turbine, super heater, reheater, PA fan, FD fan, ID fan, and cooling tower. It also outlines the main functions in the plant related to coal, steam, water, and ash handling and provides diagrams of the operational features inside the power plant.
SOLAR PROJECTS ABSTRACT-Wind solar energy -hybrid power generation system (wise)
This document discusses a hybrid wind-solar energy system for residential power generation. It introduces renewable energy sources like wind and solar. For wind power, it describes typical wind turbine sizes from 600 kW to 5 MW. For solar energy, it explains the use of photovoltaics and concentrated solar power. The system demonstrated combines a 3W solar panel and 18W wind turbine to provide continuous power to a home. A microcontroller monitors the voltages and switches the power supply accordingly between the wind and solar sources to the battery.
Must ppt
This document presents a project on developing a hybrid power plant using vertical-axis wind turbines and solar panels. The aim is to provide a renewable energy source for electricity in remote, off-grid areas. A prototype was designed and built that uses a VAWT to generate AC voltage which is rectified to DC to charge batteries. Solar panels also generate DC voltage. A switch assembly allows power from the VAWT and solar panels to combine or be used individually to power a DC motor. The system provides a reliable renewable energy source and energy storage for locations without access to the electric grid.
installation of grid solar panel of electrical department
This document summarizes a project on installing a 600-watt solar power system at RTU Kota. It includes an introduction, background on solar power in India and Rajasthan, components of the solar system including panels, charge controller, inverter and batteries. It provides schematics, calculations for sizing components, cost analysis showing return on investment within 5 years, and advantages like reduced bills, pollution-free power, and potential for panel recycling.
DESIGN & ANALYSIS OF MAGNETIC REPULSION VERTICAL AXIS WIND TURBINEPresentation
FINAL YEAR ENGINEERING. PROJECT ON DESIGN & ANALYSIS OF MAGNETIC REPULSION VERTICAL AXIS WIND TURBINE.
We intend to use the cheapest available sources as raw material for constructing a power generation VAWT’s unit which can be used as a source of electricity for Powering so as to make it cost-effective. Analysis of VAWT includes
Hybrid power generation by solar –wind
With the development of industry and
agriculture, a great amount of energy such as coal, oil
and gas has been consumed in the world. Extensive
use of these fossil energies deteriorates a series of
problems like energy crisis, environmental pollution
and so on. Everybody knows that the fossil energy
reserves are finite, some day it will be exhausted.
It is possible that the world will face a
global energy crisis due to a decline in the
availability of cheap oil and recommendations to a
decreasing dependency on fossil fuel. This has led to
increasing interest in alternate power/fuel research
such as fuel cell technology, hydrogen fuel, biodiesel,
Karrick process, solar energy, geothermal energy,
tidal energy and wind. Today, solar energy and wind
energy have significantly alternated fossil fuel with
big ecological problems.
With the development of the science and
technology, power generation using solar energy and
wind power is gradually known by more and more
people. And it is widespread used in many developed
countries. The merits of the solar and wind power
generation are very obvious-infinite and nonpolluting.
The raw materials of the solar and wind
power generation derived from nature, and wind
power generation can work twenty-four hours a day,
solar power generation only works by daylight. In
addition, this kind of power generation has no
exhaust emission and there is no influence to the
nature. But it also has some shortcomings. Because
of the imperfect of the technology, equipment of the
solar and wind power generation is very expensive.
By far, it cannot be widely used.
In addition, solar and wind power
generation system affected by the changing of the
weather very much, so it has obvious defects in
reliability compared with fossil fuel, and it is difficult
to make it fit for practical use the lack of economical
efficiency .Because of these problems it needs to
increase the reliability of energy supply by
developing a system which interacts Solar and wind
energy. This kind of system is usually called windsolar
hybrid power generation system significantly
What's hot (20)
IRJET- Hybrid Power Generation by using Vertical Axis Wind Turbine and So...
IRJET- Hybrid Power Generation by using Vertical Axis Wind Turbine and So...
Design & febrication of solar automated grass cutter
Design & febrication of solar automated grass cutter
Solar Water Heating Systems by United Energy Systems, Thane
Solar Water Heating Systems by United Energy Systems, Thane
SOLAR PROJECTS ABSTRACT-Wind solar energy -hybrid power generation system (wise)
SOLAR PROJECTS ABSTRACT-Wind solar energy -hybrid power generation system (wise)
installation of grid solar panel of electrical department
installation of grid solar panel of electrical department
DESIGN & ANALYSIS OF MAGNETIC REPULSION VERTICAL AXIS WIND TURBINEPresentation
DESIGN & ANALYSIS OF MAGNETIC REPULSION VERTICAL AXIS WIND TURBINEPresentation
Viewers also liked
Input output , heat rate characteristics and Incremental cost
This document discusses the input-output, heat rate, and incremental cost characteristics of thermal power plants. It defines input-output characteristics as a plot of fuel input versus power output. Heat rate is the ratio of fuel input to energy output and is the slope of the input-output curve. An incremental fuel rate curve plots the incremental fuel rate, or change in input divided by change in output, versus output. The incremental cost curve multiplies incremental fuel rate by fuel cost to determine incremental cost in monetary terms per unit of output. Economic dispatch of power plants aims to minimize total incremental costs while meeting demand.
Power plant performance_efficiency
Power Plant Performance/Efficiency Monitoring Tool -
Especially for them who really want to work with Efficiency monitoring, This Spread sheet include Boiler Efficiency (ASME PTC 4.0, 2008), Turbine Efficiency (ASME PTC 6.0, 1998), APH Performance (ASME PTC 4.3), Auxiliary Power Consumption (APC) moreover it generate plant MIS As well as complete report.
If you want to download in Spreadsheet/excel format.
http://www.scribd.com/doc/157799307/Power-Plant-Performance-Efficiency-Monitoring-Tool
ज्ञान प्राप्त करने के तीन तरीके है. पहला चिंतन जो सबसे सही तरीका है. दूसरा अनुकरण जो सबसे आसान तरीका है और तीसरा अनुभव जो सबसे कष्टकारी है ~ कन्फ्यूसियस
Heat rate audit in thermal power plant
This document discusses heat rate audits in thermal power plants. It aims to identify causes of efficiency losses that increase heat rate. Some key points:
- Heat rate is the amount of heat input (fuel) required per unit of power generated and impacts generation costs. Lower heat rates reduce costs.
- Losses occur in the boiler, turbine, condenser/feedwater systems, circulating water system, and from electrical/steam auxiliaries.
- Common causes of higher heat rates include incomplete combustion, turbine erosion, condenser tube fouling, and electrical auxiliary inefficiencies.
- Tracking plant parameters and conducting monthly performance tests can identify losses and guide improvement efforts to lower heat rates.
Mejia Thermal Power Station
The document provides an overview of the Mejia Thermal Power Station (MTPS) located in West Bengal, India. It is owned by the Damodar Valley Corporation and has a total installed capacity of 2340 MW generated from various units. The document describes the key components of the thermal power plant including the coal handling system, pulverizer, boiler, turbine, condenser, and switchyard. It also provides a step-by-step explanation of how coal is converted into electrical energy within the power station.
Heat rate of coal fired power plant
Heat rate is the single paramter that can tell the health of a power plant similar to the pusle rate of a person tells about ones health.
THERMAL POWER STATION PPT.
Barauni Thermal Power Station is a 320 megawatt coal-fired power station in Begusarai district, Bihar, India. It was established in 1962 through Russian collaboration. The power station currently has two operational units producing 220 MW total, while two new 500 MW units are under construction. Coal is supplied from nearby mines and the generated electricity is supplied to North Bihar. The power station aims to increase total capacity to 500 MW in the next five years through renovations.
Viewers also liked (6)
Input output , heat rate characteristics and Incremental cost
Input output , heat rate characteristics and Incremental cost
PROJECTS - TCE
- 1. PROJECTS 1 x 500 MW Bellary Thermal Power station (stage-I), KARNATAKA – Detail Engineering and review. 1 x 80 MW HZL thermal power plant for Tata projects Ltd. 4 x 3.6MW Hydro Power Plant – SUOI SAP HYDRO PROJECT, VIETNAM. Involved in 4 x 270 MW TPS JAIGAD JSW ENERGY LIMITED.