The document is a final report on a practicum measuring tools and circuit boards. It defines a project board as a circuit board that allows electronic circuits to be built without soldering. It describes the specifications of mini project boards, including their size, weight, and layout of pathways connecting component holes. The report explains that project boards make it easy to assemble, test, and modify circuits without permanent connections by allowing components to be easily added or replaced. It also outlines the working principles of direct current measuring tools and provides instructions on how to properly use a project board.

1. FINAL REPORT PRACTICUM
BASIC PHYSICS 2
DATE OFCOLLECTION:08th
January 2018
DATE OF PRACTICUM:02nd
January 2018
NAME: Utut Muhammad
"MEASURING TOOLS"
Practical tools and materials ...
"Project Board"
Definition of
Project Board is the basis of circuit circuits used to make
electronic circuits without the need for soldering.
Specifications
Board specifications are made of plastic. The size of the
project board is divided into two, namely mini size and
length. The specifications for the mini have a size of 4.5 cm
x 3.5 cm x 1 cm and weighs 50 grams.
Tool Parts
2 pairs of upper and lower lanes are connected horizontally,
to the middle part of the project board. Usually, this pathway
is used as a power line or commonly used signal path such
as a clock or communication line
5 component holes in the middle is a place for assembling
components. the path to the 5 holes is connected vertically to
the middle part of the project board, the center limit of the
project board is usually used as a place for IC
Use, Functions, and Benefits
to avoid errors and if it is wrong we can easily fix it again or
replace its components Bread Board type,
Working Principledevices
Direct current measuring initially use a suspension
galvanometer with a hanger system, this instrument is a
pioneer of rotary coil instruments which are the basis of
direct current pointing devices
How to use
The most important thing to know before using this project
board is to understand how the path which is connected to
each other with one hole.
Types and Types of Tools
Breadboard types are determined based on the many holes
on the board, for example, a 400-hole breadboard, 170 holes,
and so on.

2. K3
that must be considered is to know how the Project Board
works if it does not know it will cause damage to the Project
Board, etc.
Practicing Ohm Law, Magnetic Field, Kirchoff, RC circuit,