Presentation.pptx
•Download as PPTX, PDF•
0 likes•2 views
Thrust is a force that acts perpendicular to the surface of an object. Thrust is a type of force but not all forces are thrust. Pressure is the amount of force applied over a given area, and is calculated by dividing thrust by the area. The standard unit for pressure is the pascal, which equals one newton per square meter. Pressure depends on both the force applied and the surface area over which the force acts.
Report
Share
Report
Share
Recommended
Thrust and pressure with animation
Thrust is the force applied perpendicular to a surface. Pressure is the effect of thrust per unit area and is calculated as thrust divided by area. Pressure depends on both the force and the area it acts upon - greater force or smaller area results in higher pressure. Examples are given where distributing force over a larger area reduces pressure, such as wide straps on school bags, broad tractor tires, and foundations of buildings.
Thrust and pressure ppt
This document defines thrust as a force applied perpendicular to a surface, measured in Newtons. It explains that pressure is the effect of thrust per unit area, calculated as thrust divided by area, with units of Pascals. It provides examples of how pressure depends on both the applied force and the contact area, with greater force or smaller area resulting in higher pressure. Specifically, it notes that a sharp knife cuts better than a blunt one because the same force is applied over a smaller area, creating greater pressure.
pressure & application
This document discusses thrust, pressure, and how pressure depends on force and area. It defines thrust as a force applied perpendicular to a surface, and pressure as the effect of thrust per unit area. Pressure is calculated as thrust divided by area. It states that the same force will produce less pressure if applied over a large area versus a small area. It provides everyday examples to illustrate this principle, such as school bags having wide straps, knives needing to be sharp to concentrate force over a small area, and buildings and dams having wide foundations to reduce pressure.
Pressure(bpp1)
This document discusses the concept of pressure and provides examples. Pressure is defined as force per unit area, with the standard SI unit being the pascal (Pa). Higher pressures are caused by large forces applied over small areas, while lower pressures result from smaller forces applied over large areas. Examples are given of applications requiring high pressure, like nails, and low pressure, like caterpillar tracks. The document also provides a formula for calculating pressure and works through examples of determining pressure exerted by human feet on the ground.
class 9th ppt Thrust and pressure.pptx
Pressure is defined as the force applied to a surface divided by the area over which that force acts. It is measured in Pascals (Pa) where 1 Pa equals 1 Newton per square meter. Pressure depends on both the magnitude of the applied force and the area over which the force is distributed - the smaller the area, the greater the pressure will be for a given force. Everyday examples illustrate this relationship between pressure, force and area such as the use of wide straps on backpacks, broad tractor tires, and flat-soled shoes.
Force and pressure
This document discusses the concept of force. It begins by asking what force is present in space and how we should define force. It then outlines a 4 day plan to cover topics related to force, including introduction to force, different types of force, pressure, and atmospheric pressure. Key points covered include that force is an external agent that can change an object's motion, direction, or shape. Force has both magnitude and direction. Contact forces require interaction between objects, while non-contact forces do not. Examples of different types of forces like magnetic, frictional and pressure forces are provided. Pressure is defined as the force applied per unit area. Atmospheric pressure is also discussed.
Force & Pressure
Force is a push or pull that can cause objects to move, change speed or direction, or deform shape. There are different types of forces including pressure, which is the force applied over an area. Liquids and gases exert pressure depending on factors like height, and atmospheric pressure varies with altitude and temperature. Atmospheric pressure is important and has applications like pressurized aircraft cabins.
Force and Pressure
Forces can be pushes, pulls, or a combination of both. A force is any interaction between two objects that causes a change in motion or shape. There are two main types of forces - contact forces that act when objects touch, and non-contact forces that act over a distance like magnetic or gravitational forces. Pressure is the amount of force applied over a given area, and depends on both the force and the contact area. Applying force over a smaller area results in greater pressure.
Recommended
Thrust and pressure with animation
Thrust is the force applied perpendicular to a surface. Pressure is the effect of thrust per unit area and is calculated as thrust divided by area. Pressure depends on both the force and the area it acts upon - greater force or smaller area results in higher pressure. Examples are given where distributing force over a larger area reduces pressure, such as wide straps on school bags, broad tractor tires, and foundations of buildings.
Thrust and pressure ppt
This document defines thrust as a force applied perpendicular to a surface, measured in Newtons. It explains that pressure is the effect of thrust per unit area, calculated as thrust divided by area, with units of Pascals. It provides examples of how pressure depends on both the applied force and the contact area, with greater force or smaller area resulting in higher pressure. Specifically, it notes that a sharp knife cuts better than a blunt one because the same force is applied over a smaller area, creating greater pressure.
pressure & application
This document discusses thrust, pressure, and how pressure depends on force and area. It defines thrust as a force applied perpendicular to a surface, and pressure as the effect of thrust per unit area. Pressure is calculated as thrust divided by area. It states that the same force will produce less pressure if applied over a large area versus a small area. It provides everyday examples to illustrate this principle, such as school bags having wide straps, knives needing to be sharp to concentrate force over a small area, and buildings and dams having wide foundations to reduce pressure.
Pressure(bpp1)
This document discusses the concept of pressure and provides examples. Pressure is defined as force per unit area, with the standard SI unit being the pascal (Pa). Higher pressures are caused by large forces applied over small areas, while lower pressures result from smaller forces applied over large areas. Examples are given of applications requiring high pressure, like nails, and low pressure, like caterpillar tracks. The document also provides a formula for calculating pressure and works through examples of determining pressure exerted by human feet on the ground.
class 9th ppt Thrust and pressure.pptx
Pressure is defined as the force applied to a surface divided by the area over which that force acts. It is measured in Pascals (Pa) where 1 Pa equals 1 Newton per square meter. Pressure depends on both the magnitude of the applied force and the area over which the force is distributed - the smaller the area, the greater the pressure will be for a given force. Everyday examples illustrate this relationship between pressure, force and area such as the use of wide straps on backpacks, broad tractor tires, and flat-soled shoes.
Force and pressure
This document discusses the concept of force. It begins by asking what force is present in space and how we should define force. It then outlines a 4 day plan to cover topics related to force, including introduction to force, different types of force, pressure, and atmospheric pressure. Key points covered include that force is an external agent that can change an object's motion, direction, or shape. Force has both magnitude and direction. Contact forces require interaction between objects, while non-contact forces do not. Examples of different types of forces like magnetic, frictional and pressure forces are provided. Pressure is defined as the force applied per unit area. Atmospheric pressure is also discussed.
Force & Pressure
Force is a push or pull that can cause objects to move, change speed or direction, or deform shape. There are different types of forces including pressure, which is the force applied over an area. Liquids and gases exert pressure depending on factors like height, and atmospheric pressure varies with altitude and temperature. Atmospheric pressure is important and has applications like pressurized aircraft cabins.
Force and Pressure
Forces can be pushes, pulls, or a combination of both. A force is any interaction between two objects that causes a change in motion or shape. There are two main types of forces - contact forces that act when objects touch, and non-contact forces that act over a distance like magnetic or gravitational forces. Pressure is the amount of force applied over a given area, and depends on both the force and the contact area. Applying force over a smaller area results in greater pressure.
Force and pressure
This document discusses different types of forces:
1) Contact forces include muscular force, friction, and gravity. Muscular force is exerted by muscles, friction opposes motion between surfaces in contact, and gravity causes things to fall toward Earth.
2) Non-contact forces include magnetic force, electrostatic force, and pressure. Magnetic force pulls materials together without contact, electrostatic force is the attraction or repulsion between charged bodies, and pressure is the force applied per unit area.
3) Pressure increases with decreasing surface area or increasing depth in liquids, as the same force applied over a smaller area produces higher pressure. Liquids exert pressure on the bottom of their container that depends on the height of the liquid
Pressure '
The document discusses pressure and how it relates to force and area. It provides examples of how concentrated force over a small area creates high pressure, while spreading the same force over a larger area creates lower pressure. Examples include a sharp knife concentrating force to cut versus a blunt knife, and wide desert vehicle tires or snowshoes spreading weight to avoid sinking in sand or snow. The document also covers pressure in liquids increasing with depth due to the weight of water above. Formulas show pressure equals force divided by area and examples calculate pressure using given forces and areas.
Class 8 EM CH 8 Session 1
The document discusses different types of friction and how friction depends on the nature of the surfaces in contact. It explains that static friction is the force required to start an object moving from rest, while sliding friction is the force required to keep it moving at a constant speed. Friction occurs due to irregularities in surfaces that cause interlocking; rougher surfaces have greater friction. The distance a pencil moves depends on the surface, with greater friction on rougher surfaces requiring more applied force to overcome.
Friction.pptx
This document provides an overview of friction for an 8th grade science class. It defines friction as a force that opposes motion between two surfaces. It describes the four main types of friction - sliding, fluid, rolling, and static friction. It explains that friction occurs due to the microscopic roughness of surfaces and depends on factors like roughness and applied force. Examples are given for each type of friction. The document also discusses ways to reduce and increase friction and gives examples of how friction can be both helpful and harmful.
CBSE Class 8 Topic Force and Pressure - TopperLearning
It changes or tends to change the state of rest or the state of motion of an object by a push or pull.
Friction
Friction is a force that opposes the relative motion between two surfaces in contact. It occurs due to the roughness of surfaces on a microscopic level, with hills and valleys on each surface interacting with the other. The amount of friction depends on two main factors - the roughness of the surfaces and the force pushing them together, with rougher surfaces and greater pushing forces leading to higher friction. There are different types of friction including sliding, fluid, rolling, and static friction. Friction can be both beneficial and harmful, and there are various ways to reduce or increase the amount of friction depending on the situation.
pptforworkshopforce-160624162406 (1) (1).pptx
A force is a push or pull that cannot be seen but can be felt and observed through its effects. Forces result from interactions between objects and can cause changes in the motion, speed, direction, or shape of an object. The document defines different types of forces including contact forces like muscular force and friction, as well as non-contact forces like magnetic, electrostatic, and gravitational forces. It also discusses pressure as the force applied over an area, with examples of how pressure is affected by force and surface area.
Thrustandpressureppt
The document defines thrust as a force applied perpendicularly to a surface, while pressure is the effect of thrust per unit area. Pressure depends on both the applied force and the contact area - the same force will produce less pressure over a larger area but more pressure over a smaller area. Everyday examples are provided like school bags distributing weight over shoulders, knives cutting with focused force, and vehicle tires spreading weight to reduce sinking.
Force and pressure
This document discusses different types of forces. It defines push and pull forces and provides examples. It explains that a force is a push or pull and defines the Newton as the SI unit of force. It discusses that an interaction between two objects results in a force and provides an example of pushing an ice cream cart. It also discusses net force, magnitude and direction of forces. The document further explains how forces can cause motion, change speed or direction of an object. It distinguishes between contact forces like muscular force and friction, and non-contact forces like magnetic and gravitational forces. It defines pressure and its relationship to force and area. It also discusses atmospheric pressure and how it balances pressure inside our bodies.
3.1
Pressure is defined as force per unit area. It allows heavy loads to be supported inside car tires and causes feet to sink into soft ground. Increased pressure inside a pressure cooker allows food to cook more quickly at a high temperature. The pressure depends on both the force applied and the surface area, with greater pressure resulting from either a higher force or smaller surface area. Examples include skis distributing force over a large area to reduce pressure on snow, and sharp knives concentrating force into a small area to cut with high pressure.
Pressure and it's Application
Raj Yadav's 8th class presentation discusses pressure and its applications. Pressure depends on two factors - the area of the surface on which force acts and the magnitude of the force. Smaller the surface area, greater the pressure. Pressure can be caused by solids, liquids, and gases. Liquids exert pressure not just on the bottom of their container but in all directions. Atmospheric pressure is caused by the weight of the air in the atmosphere pressing down on the earth's surface.
Effect of change in area ; class 8
The document discusses pressure and how it relates to area. It provides examples of how broader areas are used to decrease pressure in situations like building foundations, school bag straps, and military tanks. It also explains how trains are laid on sleepers to reduce the pressure exerted on the earth, and how cutting tools have sharp edges to apply high pressure with small forces. Liquid pressure is defined as being equal to the fluid density multiplied by gravity and height. Pressure is the force applied per unit area.
Form 2 science chapter 7
The document provides information about forces and work. It defines force as a push or pull and discusses different types of forces including gravitational, frictional, electrostatic, and magnetic forces. It also defines work as the product of the applied force and the distance moved, and power as the rate at which work is done. Methods for reducing friction like lubricants and ball bearings are presented. Examples of calculating work, power, and solving physics problems involving forces are also included.
THRUST AND PRESSURE.pptx
This document contains information about thrust, pressure, factors that pressure depends on, everyday examples of pressure, pressure in fluids, buoyant force, Archimedes' principle, and applications of Archimedes' principle. It was written by Abhinav Kumar and Ishaan Aggarwal for their roll numbers 40 and 16. Key points covered include that thrust is a force perpendicular to a surface, pressure is thrust per unit area, pressure depends on force and area, buoyant force is an upward force on an object in a fluid equal to the weight of fluid displaced, and Archimedes' principle states the buoyant force equals the weight of fluid displaced.
Force and pressure
This PPT Is made by Rehet Kaur Bhatia 8D And Is made with a lot of hardwork and Peace and it is not to copy . About the chapter The topic of Force and Pressure is one of the important concepts in science. It is very important to grasp every bit of this chapter as they are basics for all your future endeavours.
Force and pressure
Force can be a push or a pull that requires two objects and can move or change the shape of an object. There are different types of forces including contact forces like muscular and frictional forces, and non-contact forces like magnetic, electrostatic, and gravitational forces. Force can change an object's motion by putting it into a state of rest or motion, and can change the shape of an object. Contact forces require physical touch while non-contact forces act over a distance. Pressure is defined as the force applied per unit area, and pressure from liquids, gases, and the atmosphere can be exerted on surfaces and inside our bodies.
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
NIPER JEE PYQ
NIPER JEE QUESTIONS
MOST FREQUENTLY ASK QUESTIONS
NIPER MEMORY BASED QUWSTIONS
Educational Technology in the Health Sciences
Plenary presentation at the NTTC Inter-university Workshop, 18 June 2024, Manila Prince Hotel.
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Whether you're new to SEO or looking to refine your existing strategies, this webinar will provide you with actionable insights and practical tips to elevate your nonprofit's online presence.
How to Fix [Errno 98] address already in use
This slide will represent the cause of the error “[Errno 98] address already in use” and the troubleshooting steps to resolve this error in Odoo.
More Related Content
Similar to Presentation.pptx
Force and pressure
This document discusses different types of forces:
1) Contact forces include muscular force, friction, and gravity. Muscular force is exerted by muscles, friction opposes motion between surfaces in contact, and gravity causes things to fall toward Earth.
2) Non-contact forces include magnetic force, electrostatic force, and pressure. Magnetic force pulls materials together without contact, electrostatic force is the attraction or repulsion between charged bodies, and pressure is the force applied per unit area.
3) Pressure increases with decreasing surface area or increasing depth in liquids, as the same force applied over a smaller area produces higher pressure. Liquids exert pressure on the bottom of their container that depends on the height of the liquid
Pressure '
The document discusses pressure and how it relates to force and area. It provides examples of how concentrated force over a small area creates high pressure, while spreading the same force over a larger area creates lower pressure. Examples include a sharp knife concentrating force to cut versus a blunt knife, and wide desert vehicle tires or snowshoes spreading weight to avoid sinking in sand or snow. The document also covers pressure in liquids increasing with depth due to the weight of water above. Formulas show pressure equals force divided by area and examples calculate pressure using given forces and areas.
Class 8 EM CH 8 Session 1
The document discusses different types of friction and how friction depends on the nature of the surfaces in contact. It explains that static friction is the force required to start an object moving from rest, while sliding friction is the force required to keep it moving at a constant speed. Friction occurs due to irregularities in surfaces that cause interlocking; rougher surfaces have greater friction. The distance a pencil moves depends on the surface, with greater friction on rougher surfaces requiring more applied force to overcome.
Friction.pptx
This document provides an overview of friction for an 8th grade science class. It defines friction as a force that opposes motion between two surfaces. It describes the four main types of friction - sliding, fluid, rolling, and static friction. It explains that friction occurs due to the microscopic roughness of surfaces and depends on factors like roughness and applied force. Examples are given for each type of friction. The document also discusses ways to reduce and increase friction and gives examples of how friction can be both helpful and harmful.
CBSE Class 8 Topic Force and Pressure - TopperLearning
It changes or tends to change the state of rest or the state of motion of an object by a push or pull.
Friction
Friction is a force that opposes the relative motion between two surfaces in contact. It occurs due to the roughness of surfaces on a microscopic level, with hills and valleys on each surface interacting with the other. The amount of friction depends on two main factors - the roughness of the surfaces and the force pushing them together, with rougher surfaces and greater pushing forces leading to higher friction. There are different types of friction including sliding, fluid, rolling, and static friction. Friction can be both beneficial and harmful, and there are various ways to reduce or increase the amount of friction depending on the situation.
pptforworkshopforce-160624162406 (1) (1).pptx
A force is a push or pull that cannot be seen but can be felt and observed through its effects. Forces result from interactions between objects and can cause changes in the motion, speed, direction, or shape of an object. The document defines different types of forces including contact forces like muscular force and friction, as well as non-contact forces like magnetic, electrostatic, and gravitational forces. It also discusses pressure as the force applied over an area, with examples of how pressure is affected by force and surface area.
Thrustandpressureppt
The document defines thrust as a force applied perpendicularly to a surface, while pressure is the effect of thrust per unit area. Pressure depends on both the applied force and the contact area - the same force will produce less pressure over a larger area but more pressure over a smaller area. Everyday examples are provided like school bags distributing weight over shoulders, knives cutting with focused force, and vehicle tires spreading weight to reduce sinking.
Force and pressure
This document discusses different types of forces. It defines push and pull forces and provides examples. It explains that a force is a push or pull and defines the Newton as the SI unit of force. It discusses that an interaction between two objects results in a force and provides an example of pushing an ice cream cart. It also discusses net force, magnitude and direction of forces. The document further explains how forces can cause motion, change speed or direction of an object. It distinguishes between contact forces like muscular force and friction, and non-contact forces like magnetic and gravitational forces. It defines pressure and its relationship to force and area. It also discusses atmospheric pressure and how it balances pressure inside our bodies.
3.1
Pressure is defined as force per unit area. It allows heavy loads to be supported inside car tires and causes feet to sink into soft ground. Increased pressure inside a pressure cooker allows food to cook more quickly at a high temperature. The pressure depends on both the force applied and the surface area, with greater pressure resulting from either a higher force or smaller surface area. Examples include skis distributing force over a large area to reduce pressure on snow, and sharp knives concentrating force into a small area to cut with high pressure.
Pressure and it's Application
Raj Yadav's 8th class presentation discusses pressure and its applications. Pressure depends on two factors - the area of the surface on which force acts and the magnitude of the force. Smaller the surface area, greater the pressure. Pressure can be caused by solids, liquids, and gases. Liquids exert pressure not just on the bottom of their container but in all directions. Atmospheric pressure is caused by the weight of the air in the atmosphere pressing down on the earth's surface.
Effect of change in area ; class 8
The document discusses pressure and how it relates to area. It provides examples of how broader areas are used to decrease pressure in situations like building foundations, school bag straps, and military tanks. It also explains how trains are laid on sleepers to reduce the pressure exerted on the earth, and how cutting tools have sharp edges to apply high pressure with small forces. Liquid pressure is defined as being equal to the fluid density multiplied by gravity and height. Pressure is the force applied per unit area.
Form 2 science chapter 7
The document provides information about forces and work. It defines force as a push or pull and discusses different types of forces including gravitational, frictional, electrostatic, and magnetic forces. It also defines work as the product of the applied force and the distance moved, and power as the rate at which work is done. Methods for reducing friction like lubricants and ball bearings are presented. Examples of calculating work, power, and solving physics problems involving forces are also included.
THRUST AND PRESSURE.pptx
This document contains information about thrust, pressure, factors that pressure depends on, everyday examples of pressure, pressure in fluids, buoyant force, Archimedes' principle, and applications of Archimedes' principle. It was written by Abhinav Kumar and Ishaan Aggarwal for their roll numbers 40 and 16. Key points covered include that thrust is a force perpendicular to a surface, pressure is thrust per unit area, pressure depends on force and area, buoyant force is an upward force on an object in a fluid equal to the weight of fluid displaced, and Archimedes' principle states the buoyant force equals the weight of fluid displaced.
Force and pressure
This PPT Is made by Rehet Kaur Bhatia 8D And Is made with a lot of hardwork and Peace and it is not to copy . About the chapter The topic of Force and Pressure is one of the important concepts in science. It is very important to grasp every bit of this chapter as they are basics for all your future endeavours.
Force and pressure
Force can be a push or a pull that requires two objects and can move or change the shape of an object. There are different types of forces including contact forces like muscular and frictional forces, and non-contact forces like magnetic, electrostatic, and gravitational forces. Force can change an object's motion by putting it into a state of rest or motion, and can change the shape of an object. Contact forces require physical touch while non-contact forces act over a distance. Pressure is defined as the force applied per unit area, and pressure from liquids, gases, and the atmosphere can be exerted on surfaces and inside our bodies.
Similar to Presentation.pptx (16)
CBSE Class 8 Topic Force and Pressure - TopperLearning
CBSE Class 8 Topic Force and Pressure - TopperLearning
Recently uploaded
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
NIPER JEE PYQ
NIPER JEE QUESTIONS
MOST FREQUENTLY ASK QUESTIONS
NIPER MEMORY BASED QUWSTIONS
Educational Technology in the Health Sciences
Plenary presentation at the NTTC Inter-university Workshop, 18 June 2024, Manila Prince Hotel.
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Whether you're new to SEO or looking to refine your existing strategies, this webinar will provide you with actionable insights and practical tips to elevate your nonprofit's online presence.
How to Fix [Errno 98] address already in use
This slide will represent the cause of the error “[Errno 98] address already in use” and the troubleshooting steps to resolve this error in Odoo.
A Visual Guide to 1 Samuel | A Tale of Two Hearts
These slides walk through the story of 1 Samuel. Samuel is the last judge of Israel. The people reject God and want a king. Saul is anointed as the first king, but he is not a good king. David, the shepherd boy is anointed and Saul is envious of him. David shows honor while Saul continues to self destruct.
How to Download & Install Module From the Odoo App Store in Odoo 17
Custom modules offer the flexibility to extend Odoo's capabilities, address unique requirements, and optimize workflows to align seamlessly with your organization's processes. By leveraging custom modules, businesses can unlock greater efficiency, productivity, and innovation, empowering them to stay competitive in today's dynamic market landscape. In this tutorial, we'll guide you step by step on how to easily download and install modules from the Odoo App Store.
How to Setup Default Value for a Field in Odoo 17
In Odoo, we can set a default value for a field during the creation of a record for a model. We have many methods in odoo for setting a default value to the field.
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...Nguyen Thanh Tu Collection
https://app.box.com/s/nrwz52lilmrw6m5kqeqn83q6vbdp8yzp220711130083 SUBHASHREE RAKSHIT Internet resources for social science
Internet resources for social science
BPSC-105 important questions for june term end exam
BPSC-105 important questions for june term end exam
Recently uploaded (20)
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
220711130088 Sumi Basak Virtual University EPC 3.pptx
220711130088 Sumi Basak Virtual University EPC 3.pptx
How to Download & Install Module From the Odoo App Store in Odoo 17
How to Download & Install Module From the Odoo App Store in Odoo 17
SWOT analysis in the project Keeping the Memory @live.pptx
SWOT analysis in the project Keeping the Memory @live.pptx
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...
220711130083 SUBHASHREE RAKSHIT Internet resources for social science
220711130083 SUBHASHREE RAKSHIT Internet resources for social science
BPSC-105 important questions for june term end exam
BPSC-105 important questions for june term end exam
Presentation.pptx
- 1. Thrust • Thrust is the force acting on an object perpendicular to the surface. Note Is force and thrust the same? Force is a push or a pull. A thrust is a force, but not every force can be counted as thrust. Thrust is a force, it is a vector quantity having both a magnitude and a direction
- 3. Pressure • Pressure is the force acting on the unit area of a surface. PRESSURE = THRUST/AREA Note The greater the thrust applied to a given area, the higher the pressure. The SI unit of pressure is N/m2. The SI unit of pressure is also called Pascal (Pa). • The pressure depends on the following factors (i) Force applied (ii) Area over which it acts.
- 4. Everyday observations on the basis of pressure 1. School bags have wide straps. 2. Sharp knife cuts better than a blunt knife. 3. Tip of a needle is made sharp. 4. Depression is much more when a man stands on the cushion than when he lies down or sits on it. 5. The tractors have broad tyers so that there is less pressure on the ground and the tyers do not sink into comparatively soft ground in the fields. 6. It is easier to walk on soft sand if we have flat shoes rather than shoes with sharp heels.