ppt dadri gas pwer plani
•Download as PPTX, PDF•
0 likes•27 views
This 3 sentence summary provides the key details about the document: The document appears to be a presentation submitted to Dr. Babita Jain at Poornima College of Engineering about an internship at the Electrical Maintenance Department of NTPC Dadri in Uttar Pradesh from May 20, 2019 to June 18, 2019. The presentation covers topics such as the process of electricity generation, different power plant types including solar, thermal, and gas power plants as well as components of a gas power plant and the control room and switchyard.
Report
Share
Report
Share
Recommended
DADRI GAS POWER PLANT PPT
This document is a presentation submitted to Dr. Babita Jain at Poornima College of Engineering about an internship at the Electrical Maintenance Department of NTPC Dadri from May 20, 2019 to June 18, 2019. The presentation covers information about NTPC Dadri, the process of electricity generation, and components of the gas power plant including the gas turbine, cooling tower, control room, and switchyard. It also lists disadvantages of the gas turbine.
Srikanth cv
Srikanth Jayaraman is seeking a challenging role in non-conventional energy resources. He has over 15 years of experience in the wind energy sector, working for companies like Vestas Wind Technology India and Vestas RRB India. He currently holds the position of Assistant Manager, Technology Department at Vestas Wind Technology India, where he is responsible for wind turbine power performance testing and analysis. Srikanth has expertise in areas like micrositing, wind resource assessment, turbine performance monitoring and data analysis. He holds a diploma in electrical and electronics engineering.
Photosense
PhotoSense provides research, production, and installation of high efficiency solar cells and modules. They offer feasibility analysis, turnkey solar systems, distribution services, and lifetime maintenance. The benefits of solar power include zero emissions, short return on investment, and combined heat and power generation. PhotoSense aims to address customer expectations of reliability, low cost energy, and guarantees while alleviating concerns over efficiency, design life, service, and unexpected costs.
Coal to electricity
The document discusses the inputs and outputs of a 1000 MW power station. It breaks down the costs of thermal power generation as 66% fuel cost, 28% capital cost, and 6% operating cost. It also shows the energy conversion efficiency of a thermal power cycle, with 100% of the heat input, 39% rejected as heat, and 61% converted to electrical energy. Finally, it outlines the coal to electricity process which uses a modified Rankine cycle and tangential corner coal firing arrangement to combust coal and convert the resulting heat energy into electrical energy via an industrial turbine generator unit.
IEEE 2014 NS2 NETWORKING PROJECTS Cloudy computing leveraging weather foreca...
IEEE 2014 NS2 NETWORKING PROJECTS Cloudy computing leveraging weather foreca...IEEEBEBTECHSTUDENTPROJECTS
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.orgS5 RES Technical Considerations
This document summarizes information about renewable energy and electricity systems. It discusses how renewable energy sources like wind and solar are increasingly contributing to electricity generation capacity but can be intermittent. Concentrating solar power (CSP) with thermal energy storage is presented as the most viable solution currently for providing dispatchable renewable energy on a utility scale. CSP plants can store solar energy as heat and release it to produce electricity when the sun is not available, providing reliability similar to fossil fuel plants. The document argues that for high shares of renewable energy on the grid, dispatchable sources like CSP will be needed to maintain grid stability and reliability in a cost effective way.
Natural power finance
Natural power is an internationally recognized manufacturer & supplier. One of the fastest growing solar panel companies globally and is specialized in mono and polycrystalline photovoltaic (PV) cells & modules. Natural power is a leading turnkey solution provider of photovoltaic systems in India.
Performance Analysis of 5 MWP Grid-Connected Solar PV Power Plant Using IE...
This document analyzes the performance of a 5 MW grid-connected solar PV power plant in India using data recorded over 2016. Key parameters like energy output, performance ratio, and final yield are calculated and compared to simulated results from PV Syst software. The plant's annual performance ratio was 73.02%, lower than the simulated 78.10% due mainly to a transformer failure. Monthly energy output and final yield varied with weather conditions. While most months matched simulated results within 9%, August differed by 21%. The analysis provides insights to improve plant maintenance and optimize performance.
Recommended
DADRI GAS POWER PLANT PPT
This document is a presentation submitted to Dr. Babita Jain at Poornima College of Engineering about an internship at the Electrical Maintenance Department of NTPC Dadri from May 20, 2019 to June 18, 2019. The presentation covers information about NTPC Dadri, the process of electricity generation, and components of the gas power plant including the gas turbine, cooling tower, control room, and switchyard. It also lists disadvantages of the gas turbine.
Srikanth cv
Srikanth Jayaraman is seeking a challenging role in non-conventional energy resources. He has over 15 years of experience in the wind energy sector, working for companies like Vestas Wind Technology India and Vestas RRB India. He currently holds the position of Assistant Manager, Technology Department at Vestas Wind Technology India, where he is responsible for wind turbine power performance testing and analysis. Srikanth has expertise in areas like micrositing, wind resource assessment, turbine performance monitoring and data analysis. He holds a diploma in electrical and electronics engineering.
Photosense
PhotoSense provides research, production, and installation of high efficiency solar cells and modules. They offer feasibility analysis, turnkey solar systems, distribution services, and lifetime maintenance. The benefits of solar power include zero emissions, short return on investment, and combined heat and power generation. PhotoSense aims to address customer expectations of reliability, low cost energy, and guarantees while alleviating concerns over efficiency, design life, service, and unexpected costs.
Coal to electricity
The document discusses the inputs and outputs of a 1000 MW power station. It breaks down the costs of thermal power generation as 66% fuel cost, 28% capital cost, and 6% operating cost. It also shows the energy conversion efficiency of a thermal power cycle, with 100% of the heat input, 39% rejected as heat, and 61% converted to electrical energy. Finally, it outlines the coal to electricity process which uses a modified Rankine cycle and tangential corner coal firing arrangement to combust coal and convert the resulting heat energy into electrical energy via an industrial turbine generator unit.
IEEE 2014 NS2 NETWORKING PROJECTS Cloudy computing leveraging weather foreca...
IEEE 2014 NS2 NETWORKING PROJECTS Cloudy computing leveraging weather foreca...IEEEBEBTECHSTUDENTPROJECTS
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.orgS5 RES Technical Considerations
This document summarizes information about renewable energy and electricity systems. It discusses how renewable energy sources like wind and solar are increasingly contributing to electricity generation capacity but can be intermittent. Concentrating solar power (CSP) with thermal energy storage is presented as the most viable solution currently for providing dispatchable renewable energy on a utility scale. CSP plants can store solar energy as heat and release it to produce electricity when the sun is not available, providing reliability similar to fossil fuel plants. The document argues that for high shares of renewable energy on the grid, dispatchable sources like CSP will be needed to maintain grid stability and reliability in a cost effective way.
Natural power finance
Natural power is an internationally recognized manufacturer & supplier. One of the fastest growing solar panel companies globally and is specialized in mono and polycrystalline photovoltaic (PV) cells & modules. Natural power is a leading turnkey solution provider of photovoltaic systems in India.
Performance Analysis of 5 MWP Grid-Connected Solar PV Power Plant Using IE...
This document analyzes the performance of a 5 MW grid-connected solar PV power plant in India using data recorded over 2016. Key parameters like energy output, performance ratio, and final yield are calculated and compared to simulated results from PV Syst software. The plant's annual performance ratio was 73.02%, lower than the simulated 78.10% due mainly to a transformer failure. Monthly energy output and final yield varied with weather conditions. While most months matched simulated results within 9%, August differed by 21%. The analysis provides insights to improve plant maintenance and optimize performance.
Sekem Energy - ADA-project - Birgit Birnstingl 20130611
Birgit Birnstingl introducing Sekem Energy and the ADA project - Solar thermal energy demonstration plant at SEKEM's main farm near Belbeis - at Heliopolis University for Sustainable Development
S3 solar energy
The CSP technology in a simplified way (e.g. how
it works, system components, options); Selection criteria e.g. location, size,
technology, O&M, contract type (PPA).
Phillips Ch10 Ppt 1
A brief overview of the cost drivers for CO2 capture from coal power plants and what can be done to decrease those costs.
Rooftop Solar System
The document outlines a solar potential assessment and feasibility study for planning a rooftop solar power plant. The study would analyze a client's power bills, energy consumption patterns, and available roof space. It would provide a basic design, simulate energy generation, estimate costs, and analyze the economics. The minimum acceptable system size is 10 kW. The study outputs would determine the reliable power output, cost savings from exporting excess power to the grid, and the financial benefits of captive solar generation. The company also handles supply, installation, grid interconnectivity, commissioning, and provides remote performance monitoring.
Micro-grid Design for Ozyegin University
This file includes the presentation for Energy Systems course final project entitled Micro-grid Design for Ozyegin University.
The numbers and the ideas should not be used as a reference for other applications. The presentation is not meant to represent a real case study.
Grid-Connected Photovoltaic System Requirement-Crimson Publishers
Grid-Connected Photovoltaic System Requirement by Tarek Selmi* and Adel Gastli in Peer Review Journal of Solar & Photoenergy Systems
DADRI GAS POWER PLANT report
This document is a practical training report submitted by Banti Saini to fulfill requirements for a Bachelor of Technology degree in Electrical Engineering. The report summarizes Banti Saini's 30-day industrial training at the NTPC Dadri power plant in Uttar Pradesh, India from May 20th to June 18th 2019. The training covered topics like gas turbine starting systems, fuel systems, gas plant operations, combined cycle power plants, and automation and control systems. The report includes declarations, certificates, acknowledgments, tables of contents, and chapters discussing various aspects of the NTPC Dadri power plant.
Banti industrial training-report-on-ntpc-dadri GAS POWER PLANT
The document describes a report on an industrial training completed at the NTPC Dadri gas power plant. It provides an overview of NTPC and the Dadri station. The bulk of the document then focuses on introducing gas power plants, describing their components like the gas turbine starting system and fuel system. It explains how combined-cycle power plants work and the advantages they provide over conventional power generation methods.
IRJET - Power Generation, Consumption and Power Shortage in India
India is the third largest producer and consumer of electricity globally. While India has an installed power generation capacity of over 350 GW, it still faces daily power shortages of 40,000 MW. Coal is the primary source of energy in India and accounts for about three-quarters of electricity production, though the government is promoting renewable sources like solar and wind. Power generation relies on both non-renewable sources like coal and gas as well as renewable sources including hydro, wind, and solar, with thermal power plants producing the majority of electricity in India.
Practical Training Report on RGTPP Ramgarh Jaisalmer
RGTPP is located near Ramgarh Town district head quarter, Jaisalmer (Rajasthan), which is largest district of the state. Its installed capacity at about 60 km from is 270 MW. And this plant is located in largest state of India, based on area
There was problem in maintaining desired quality standards in electric supply to Jaisalmer on account of excess losses because of longer transmission lines. To rectify above problem and to utilize available natural gas in this area RGTPP was established in this border district whose existing capacity is 270 MW.
IRJET- Modelling of a PMSG Wind Turbine with Voltage Control
This document summarizes a study that models a wind energy conversion system using a permanent magnet synchronous generator (PMSG) with variable-speed control. It describes the system components, including the wind turbine, PMSG, maximum power point tracking (MPPT) algorithm, and inverters. Mathematical models are presented for the wind turbine, PMSG in a d-q reference frame, and MPPT control. Simulations were performed in MATLAB to verify the system design models for the generator-side inverter, grid-side inverter, MPPT controller, and pitch angle control of the wind turbine. The simulation results validate the autonomous control system design for the PMSG-based wind energy conversion system.
IRJET - Review on Ideal Microgrid for Indian Farmers
This document reviews an ideal solar microgrid system for Indian farmers. It proposes a system consisting of PV panels, maximum power point tracking (MPPT), a three-phase inverter, and battery storage. It analyzes different techniques for MPPT, inverter control schemes, and battery energy storage. Perturb and observe and incremental conductance are discussed as MPPT algorithms, and single-stage, dual-stage, and microinverters are reviewed as inverter topologies. The system aims to provide farmers with electricity for their needs while allowing excess to be sold back to the grid as a new source of income.
IRJET- Pedal Operated Power Generation System
This document describes a pedal-operated power generation system that uses human pedaling energy to produce electricity. The system uses a bicycle structure with a belt and chain drive system connected to an alternator. As the pedals are rotated, it causes the alternator rotor to spin and generate electricity that can be stored in batteries. Testing showed relationships between alternator speed and voltage/current output. The system has potential for scaling up to increase electricity production and could provide power in areas without electricity access.
Pitch Angle Control of Wind Turbine using Fuzzy Logic Control
The field of power systems operation and control including renewable energy (RE) along with power, quality is considered as one of the major technical challenges among the researchers and practicing engineers. Several types of renewable energy resources are available on earth such as solar, wind, Geo-thermal, hydro, etc. The foremost resources of renewable energy are - Sunlight and Wind. The wind energy is always a center of attraction for power engineers. In the wind energy system, the pitch angle of turbine blades is playing an important role in controlling the power output of the system. The pitch angle imposes two types of control on the wind turbine system: aerodynamic torque and the rotational velocity of the turbine system. These parameters directly affect the performance of the wind power generation system in terms of the profile of power, voltage, and current. Conventionally, PID control-based system modeling has been used to evaluate the optimal pitch angle for a given wind pattern. However, PID based Pitch Angle Identification require regular tuning against variation in wind velocity and significant large time for tuning. Thus, Artificial Intelligence could provide a better solution in comparison to PID Based tuning strategy. The present work shows the evaluation of the optimal pitch angle of the wind turbines for variable wind velocity using the Fuzzy Logic Control Strategy. The test results are obtained by MATLAB Simulink modeling of the wind power generation system. The simulation shows that fuzzy logic control will provide an optimal pitch angle to obtain more efficient solutions. The existing fuzzy control-based simulation model solutions can be utilized as a testbed for evaluating the optimal pitch Angle of any geographical region. In the present work, the optimal pitch angle of Various Geographical regions of India.
Renewable energy sources
This document summarizes a seminar presentation on renewable energy sources and hybrid power systems. It introduces renewable energy sources like wind, solar, and biogas energy systems. It discusses India's electricity sector and the need for renewable energy due to increasing power demands and shortages. A hybrid system is proposed that combines wind and solar power generation with biogas-based power integrated through a controller and batteries to provide electricity. The document concludes by emphasizing the importance of properly integrating renewable energy sources for applications like rural electrification.
main-project1
This document is a major project report submitted by Sandiip Guptaa in partial fulfillment of their B.Tech degree in Electrical and Electronics Engineering at Sikkim Manipal Institute of Technology. The project involved modelling the integration of renewable energy sources like solar and wind in PSCAD. It describes the modelling of PV and wind systems, provides an overview of PSCAD simulation tool, discusses microgrid components, operation and control techniques. It also includes the objectives, methodology, models developed and output results of the project on modelling renewable energy integration in a microgrid using PSCAD software.
Front page & cert
This seminar report discusses the electrical machines used in electric power steering applications. It was submitted by Abhishek C Babu to the Department of Electrical and Electronics Engineering at Universal Engineering College in Thrissur, India, in partial fulfillment of the requirements for a Bachelor of Technology degree. The report was certified by the seminar coordinator, guide, and head of the department as covering electrical machines used for electric power steering.
IRJET- Energy Management on Grid Connected Hybrid Renewable Energy Sources us...
This document presents a study on using an Adaptive Neural Fuzzy Interference System (ANFIS) algorithm for maximum power point tracking (MPPT) in a hybrid renewable energy system combining solar and wind power. The ANFIS MPPT controller aims to overcome limitations of traditional fuzzy logic controllers in rapidly locating the global maximum power point under changing conditions. A simulation model of the proposed ANFIS controlled hybrid system is developed, showing it can maximize total output power while minimizing oscillations and tracking time. Hardware results demonstrate the system effectively supplies continuous power from integrated solar and wind sources.
RESUME AMIT (2)
Amit Kumar Ghorai's curriculum vitae summarizes his educational and professional qualifications and experience as an electrical engineer specializing in thermal power plant engineering. He holds a diploma in electrical engineering, post-diploma training in thermal power plant engineering, and has participated in simulator training. His work experience includes over 4 years as an electrical supervisor at a thermal power plant and over 2 years as an electrical engineer maintaining textile plant machineries. He has skills in operating, maintaining and troubleshooting equipment commonly used in thermal power plants.
training report NTPC Muzaffarpur Bihar
This document provides an industrial training report on the generation system of the National Thermal Power Corporation Ltd. (NTPC). It discusses the key components of a thermal power plant that use the modified Rankine cycle to convert the chemical energy of coal into electrical energy. These include the boiler, turbine, condenser, and other auxiliary components. The report also provides an overview of the processes involved in coal handling, steam generation, power generation using steam turbines, and electricity distribution at NTPC power plants. It aims to provide an understanding of the technical aspects and management of thermal power generation.
Ntpc report
This document provides an industrial training report on the generation system of the National Thermal Power Corporation Ltd. (NTPC). It discusses the key components of a thermal power plant that use the modified Rankine cycle to convert the chemical energy of coal into electrical energy. These include the boiler, turbine, condenser, and other auxiliary components. The report also provides an overview of the processes involved in coal handling, steam generation, power generation using steam turbines, and electricity distribution at NTPC power plants. It aims to provide an understanding of the technical aspects and management of thermal power generation.
LoRa technology based on health monitoring system
This document outlines the scheme and syllabus for the 7th and 8th semesters of the undergraduate B.Tech program in Electrical Engineering at Rajasthan Technical University, Kota. It includes the teaching and examination scheme with details of courses, credits, course hours, and evaluation. Course codes, names, topics and learning outcomes are provided for core and open elective courses offered in the 7th and 8th semesters. Reference books and reading materials are also listed for each course. The document aims to provide transparency on the curriculum, examinations, and expected learning for the 4th year of the B.Tech Electrical Engineering program.
More Related Content
What's hot
Sekem Energy - ADA-project - Birgit Birnstingl 20130611
Birgit Birnstingl introducing Sekem Energy and the ADA project - Solar thermal energy demonstration plant at SEKEM's main farm near Belbeis - at Heliopolis University for Sustainable Development
S3 solar energy
The CSP technology in a simplified way (e.g. how
it works, system components, options); Selection criteria e.g. location, size,
technology, O&M, contract type (PPA).
Phillips Ch10 Ppt 1
A brief overview of the cost drivers for CO2 capture from coal power plants and what can be done to decrease those costs.
Rooftop Solar System
The document outlines a solar potential assessment and feasibility study for planning a rooftop solar power plant. The study would analyze a client's power bills, energy consumption patterns, and available roof space. It would provide a basic design, simulate energy generation, estimate costs, and analyze the economics. The minimum acceptable system size is 10 kW. The study outputs would determine the reliable power output, cost savings from exporting excess power to the grid, and the financial benefits of captive solar generation. The company also handles supply, installation, grid interconnectivity, commissioning, and provides remote performance monitoring.
Micro-grid Design for Ozyegin University
This file includes the presentation for Energy Systems course final project entitled Micro-grid Design for Ozyegin University.
The numbers and the ideas should not be used as a reference for other applications. The presentation is not meant to represent a real case study.
Grid-Connected Photovoltaic System Requirement-Crimson Publishers
Grid-Connected Photovoltaic System Requirement by Tarek Selmi* and Adel Gastli in Peer Review Journal of Solar & Photoenergy Systems
What's hot (6)
Sekem Energy - ADA-project - Birgit Birnstingl 20130611
Sekem Energy - ADA-project - Birgit Birnstingl 20130611
Grid-Connected Photovoltaic System Requirement-Crimson Publishers
Grid-Connected Photovoltaic System Requirement-Crimson Publishers
Similar to ppt dadri gas pwer plani
DADRI GAS POWER PLANT report
This document is a practical training report submitted by Banti Saini to fulfill requirements for a Bachelor of Technology degree in Electrical Engineering. The report summarizes Banti Saini's 30-day industrial training at the NTPC Dadri power plant in Uttar Pradesh, India from May 20th to June 18th 2019. The training covered topics like gas turbine starting systems, fuel systems, gas plant operations, combined cycle power plants, and automation and control systems. The report includes declarations, certificates, acknowledgments, tables of contents, and chapters discussing various aspects of the NTPC Dadri power plant.
Banti industrial training-report-on-ntpc-dadri GAS POWER PLANT
The document describes a report on an industrial training completed at the NTPC Dadri gas power plant. It provides an overview of NTPC and the Dadri station. The bulk of the document then focuses on introducing gas power plants, describing their components like the gas turbine starting system and fuel system. It explains how combined-cycle power plants work and the advantages they provide over conventional power generation methods.
IRJET - Power Generation, Consumption and Power Shortage in India
India is the third largest producer and consumer of electricity globally. While India has an installed power generation capacity of over 350 GW, it still faces daily power shortages of 40,000 MW. Coal is the primary source of energy in India and accounts for about three-quarters of electricity production, though the government is promoting renewable sources like solar and wind. Power generation relies on both non-renewable sources like coal and gas as well as renewable sources including hydro, wind, and solar, with thermal power plants producing the majority of electricity in India.
Practical Training Report on RGTPP Ramgarh Jaisalmer
RGTPP is located near Ramgarh Town district head quarter, Jaisalmer (Rajasthan), which is largest district of the state. Its installed capacity at about 60 km from is 270 MW. And this plant is located in largest state of India, based on area
There was problem in maintaining desired quality standards in electric supply to Jaisalmer on account of excess losses because of longer transmission lines. To rectify above problem and to utilize available natural gas in this area RGTPP was established in this border district whose existing capacity is 270 MW.
IRJET- Modelling of a PMSG Wind Turbine with Voltage Control
This document summarizes a study that models a wind energy conversion system using a permanent magnet synchronous generator (PMSG) with variable-speed control. It describes the system components, including the wind turbine, PMSG, maximum power point tracking (MPPT) algorithm, and inverters. Mathematical models are presented for the wind turbine, PMSG in a d-q reference frame, and MPPT control. Simulations were performed in MATLAB to verify the system design models for the generator-side inverter, grid-side inverter, MPPT controller, and pitch angle control of the wind turbine. The simulation results validate the autonomous control system design for the PMSG-based wind energy conversion system.
IRJET - Review on Ideal Microgrid for Indian Farmers
This document reviews an ideal solar microgrid system for Indian farmers. It proposes a system consisting of PV panels, maximum power point tracking (MPPT), a three-phase inverter, and battery storage. It analyzes different techniques for MPPT, inverter control schemes, and battery energy storage. Perturb and observe and incremental conductance are discussed as MPPT algorithms, and single-stage, dual-stage, and microinverters are reviewed as inverter topologies. The system aims to provide farmers with electricity for their needs while allowing excess to be sold back to the grid as a new source of income.
IRJET- Pedal Operated Power Generation System
This document describes a pedal-operated power generation system that uses human pedaling energy to produce electricity. The system uses a bicycle structure with a belt and chain drive system connected to an alternator. As the pedals are rotated, it causes the alternator rotor to spin and generate electricity that can be stored in batteries. Testing showed relationships between alternator speed and voltage/current output. The system has potential for scaling up to increase electricity production and could provide power in areas without electricity access.
Pitch Angle Control of Wind Turbine using Fuzzy Logic Control
The field of power systems operation and control including renewable energy (RE) along with power, quality is considered as one of the major technical challenges among the researchers and practicing engineers. Several types of renewable energy resources are available on earth such as solar, wind, Geo-thermal, hydro, etc. The foremost resources of renewable energy are - Sunlight and Wind. The wind energy is always a center of attraction for power engineers. In the wind energy system, the pitch angle of turbine blades is playing an important role in controlling the power output of the system. The pitch angle imposes two types of control on the wind turbine system: aerodynamic torque and the rotational velocity of the turbine system. These parameters directly affect the performance of the wind power generation system in terms of the profile of power, voltage, and current. Conventionally, PID control-based system modeling has been used to evaluate the optimal pitch angle for a given wind pattern. However, PID based Pitch Angle Identification require regular tuning against variation in wind velocity and significant large time for tuning. Thus, Artificial Intelligence could provide a better solution in comparison to PID Based tuning strategy. The present work shows the evaluation of the optimal pitch angle of the wind turbines for variable wind velocity using the Fuzzy Logic Control Strategy. The test results are obtained by MATLAB Simulink modeling of the wind power generation system. The simulation shows that fuzzy logic control will provide an optimal pitch angle to obtain more efficient solutions. The existing fuzzy control-based simulation model solutions can be utilized as a testbed for evaluating the optimal pitch Angle of any geographical region. In the present work, the optimal pitch angle of Various Geographical regions of India.
Renewable energy sources
This document summarizes a seminar presentation on renewable energy sources and hybrid power systems. It introduces renewable energy sources like wind, solar, and biogas energy systems. It discusses India's electricity sector and the need for renewable energy due to increasing power demands and shortages. A hybrid system is proposed that combines wind and solar power generation with biogas-based power integrated through a controller and batteries to provide electricity. The document concludes by emphasizing the importance of properly integrating renewable energy sources for applications like rural electrification.
main-project1
This document is a major project report submitted by Sandiip Guptaa in partial fulfillment of their B.Tech degree in Electrical and Electronics Engineering at Sikkim Manipal Institute of Technology. The project involved modelling the integration of renewable energy sources like solar and wind in PSCAD. It describes the modelling of PV and wind systems, provides an overview of PSCAD simulation tool, discusses microgrid components, operation and control techniques. It also includes the objectives, methodology, models developed and output results of the project on modelling renewable energy integration in a microgrid using PSCAD software.
Front page & cert
This seminar report discusses the electrical machines used in electric power steering applications. It was submitted by Abhishek C Babu to the Department of Electrical and Electronics Engineering at Universal Engineering College in Thrissur, India, in partial fulfillment of the requirements for a Bachelor of Technology degree. The report was certified by the seminar coordinator, guide, and head of the department as covering electrical machines used for electric power steering.
IRJET- Energy Management on Grid Connected Hybrid Renewable Energy Sources us...
This document presents a study on using an Adaptive Neural Fuzzy Interference System (ANFIS) algorithm for maximum power point tracking (MPPT) in a hybrid renewable energy system combining solar and wind power. The ANFIS MPPT controller aims to overcome limitations of traditional fuzzy logic controllers in rapidly locating the global maximum power point under changing conditions. A simulation model of the proposed ANFIS controlled hybrid system is developed, showing it can maximize total output power while minimizing oscillations and tracking time. Hardware results demonstrate the system effectively supplies continuous power from integrated solar and wind sources.
RESUME AMIT (2)
Amit Kumar Ghorai's curriculum vitae summarizes his educational and professional qualifications and experience as an electrical engineer specializing in thermal power plant engineering. He holds a diploma in electrical engineering, post-diploma training in thermal power plant engineering, and has participated in simulator training. His work experience includes over 4 years as an electrical supervisor at a thermal power plant and over 2 years as an electrical engineer maintaining textile plant machineries. He has skills in operating, maintaining and troubleshooting equipment commonly used in thermal power plants.
training report NTPC Muzaffarpur Bihar
This document provides an industrial training report on the generation system of the National Thermal Power Corporation Ltd. (NTPC). It discusses the key components of a thermal power plant that use the modified Rankine cycle to convert the chemical energy of coal into electrical energy. These include the boiler, turbine, condenser, and other auxiliary components. The report also provides an overview of the processes involved in coal handling, steam generation, power generation using steam turbines, and electricity distribution at NTPC power plants. It aims to provide an understanding of the technical aspects and management of thermal power generation.
Ntpc report
This document provides an industrial training report on the generation system of the National Thermal Power Corporation Ltd. (NTPC). It discusses the key components of a thermal power plant that use the modified Rankine cycle to convert the chemical energy of coal into electrical energy. These include the boiler, turbine, condenser, and other auxiliary components. The report also provides an overview of the processes involved in coal handling, steam generation, power generation using steam turbines, and electricity distribution at NTPC power plants. It aims to provide an understanding of the technical aspects and management of thermal power generation.
LoRa technology based on health monitoring system
This document outlines the scheme and syllabus for the 7th and 8th semesters of the undergraduate B.Tech program in Electrical Engineering at Rajasthan Technical University, Kota. It includes the teaching and examination scheme with details of courses, credits, course hours, and evaluation. Course codes, names, topics and learning outcomes are provided for core and open elective courses offered in the 7th and 8th semesters. Reference books and reading materials are also listed for each course. The document aims to provide transparency on the curriculum, examinations, and expected learning for the 4th year of the B.Tech Electrical Engineering program.
Engr Ahmad raza Internship report on 600mw ccpp giddupdf
This document is a training report submitted by Ahmad Raza to fulfill requirements for a BSc in Electrical Engineering Technology. It summarizes his 14 week internship at the GENCO Holding Company Thermal Power Station in Guddu, Sindh, Pakistan from February to May 2016. The report provides details about the power station such as its location, organizational structure, and generation capacity across 5 phases totaling 2402MW. It also describes the technical components of the combined cycle power plant including the gas turbine, HRSG, steam turbine, generator, and other auxiliary systems. Ahmad Raza provides information learned through visits and maintenance experience at the various units.
Piezoelectric energy harvesting
This document discusses piezoelectricity and its applications. It introduces piezoelectricity, which is the ability of certain materials to generate an electric charge in response to applied mechanical stress. These materials include quartz and can harvest energy from pressure points. The document then discusses using piezoelectric materials in power generating shoes and sensors to capture energy from foot strikes. It outlines the advantages of piezoelectricity over batteries and provides examples of piezoelectric applications in devices and future potential to capture more energy from traffic and footsteps.
COMPARITIVE STUDY OF PARTICLE SWARM OPTIMISATION & GREY WOLF OPTIMIZATION IN ...
This document compares the performance of particle swarm optimization (PSO) and grey wolf optimization (GWO) algorithms for solving the economic load dispatch problem in power systems. The economic load dispatch problem involves distributing load between generation units in a way that minimizes production costs while meeting system constraints. PSO and GWO are implemented on standard 14-bus and 30-bus test power systems. Results show that both algorithms find solutions that minimize fuel costs and emissions while satisfying operational constraints like bus voltages and transmission losses. GWO provides slightly better performance than PSO in terms of lower costs and emissions. Overall, the study demonstrates that metaheuristic optimization techniques like PSO and GWO can effectively solve the non-convex economic load dispatch problem.
rajghat-power-house-new-delhi-training-report
This document provides a training report from an internship at Rajghat Power House. It includes an acknowledgements section thanking those who supported the training. It also includes a preface describing how practical experience is important for engineering students to develop hands-on knowledge. The bulk of the document consists of sections on power plant basics, control and instrumentation, and conclusions from the learning experience. It aims to impart knowledge of fundamentals and applications gained during the industrial training placement.
Similar to ppt dadri gas pwer plani (20)
Banti industrial training-report-on-ntpc-dadri GAS POWER PLANT
Banti industrial training-report-on-ntpc-dadri GAS POWER PLANT
IRJET - Power Generation, Consumption and Power Shortage in India
IRJET - Power Generation, Consumption and Power Shortage in India
Practical Training Report on RGTPP Ramgarh Jaisalmer
Practical Training Report on RGTPP Ramgarh Jaisalmer
IRJET- Modelling of a PMSG Wind Turbine with Voltage Control
IRJET- Modelling of a PMSG Wind Turbine with Voltage Control
IRJET - Review on Ideal Microgrid for Indian Farmers
IRJET - Review on Ideal Microgrid for Indian Farmers
Pitch Angle Control of Wind Turbine using Fuzzy Logic Control
Pitch Angle Control of Wind Turbine using Fuzzy Logic Control
IRJET- Energy Management on Grid Connected Hybrid Renewable Energy Sources us...
IRJET- Energy Management on Grid Connected Hybrid Renewable Energy Sources us...
Engr Ahmad raza Internship report on 600mw ccpp giddupdf
Engr Ahmad raza Internship report on 600mw ccpp giddupdf
COMPARITIVE STUDY OF PARTICLE SWARM OPTIMISATION & GREY WOLF OPTIMIZATION IN ...
COMPARITIVE STUDY OF PARTICLE SWARM OPTIMISATION & GREY WOLF OPTIMIZATION IN ...
Recently uploaded
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
this notes have been created
by Eric36 at nyamata ttc
after readings
pe book for y2sme .
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Recycled Concrete Aggregate in Construction Part II
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
Recently uploaded (20)
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Recycled Concrete Aggregate in Construction Part II
Recycled Concrete Aggregate in Construction Part II
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
ppt dadri gas pwer plani
- 1. 2016PCEEEBANTI038@POORNIMA.ORG SUBMETED TO:- Dr. Babita Jain Coordinator :-Practical and industrial training DEPARTMENT OF FINAL YEAR (ACADEMIC SESSION 2019-20) POORNIMA COLLEGE OF ENGINEERING ISI-6 ,RIICO INSTITUTIONAL AREA,SITAPURA,JAIPUR-302022 A Presentation on “Electrical Maintenance Department” For The Partial Fulfilment Of Degree Of BACHELOR OF TECHNOLOGY From POORNIMA COLLEGE OF ENGINEERING
- 2. NTPC DADR I ELECTRICAL MAINTRNANCE DEPARTMENT DURATION:20-05-2019 to 18-06-2019 AT NTPC DADRI Gautam Budh Nagar disst, Uttar Pradesh
- 3. Contents .About Ntpc Dadri .Process of generation electricity power .Solar Power Plant Thermal Power Plant Gas Power Plant Components of gas power plant Start-up of gas turbine Fules used in gas turbine chamber Cooling tower Control room Switchyrd Disadvantage of gas turbine
- 4. About
- 5. `
- 6. Robot and workersto clean solar panels