2. Kee Guard
®
Freestanding,
non-
penetrative,
collective roof
edge
protection
system
Complies with
EN ISO 13374
Class A
2
3. Kee® Guard
Features
Independently tested, exceeds all
European Safety requirements
Provides Collective Protection for
roofs of up to 10º pitch
Versatile modular construction
Three types of upright available
Standard Fittings and Tubes
galvanised to BS EN ISO 1461
Recycled PVC counterweights
Available colour coated
3
4. Kee® Guard
Benefits
Quick and easy to install
No penetration of Roof Membrane
No welding, bending or threading on
site
Low installation time and cost
Sections can be added to and
changed on site
No special tools required
Recycled PVC weights are easy to
handle and position, reducing
installation time
4
6. Kee® Guard
Components
KGU35 vertical post
1100mm high
Locator for the counter weights
Supplied as assembly
Fitted standard with 2 off 135-8
Kee Klamp saddle fittings
6
8. Kee® Guard
Components
Counterweights
13.5 kg to 16.5 kg
460 x 500 x 85 mm
Carrying handles moulded into the
design
Available in black as standard
Orange available where required to
highlight a trip hazard.
Other colours available by request at
extra cost
Environmentally friendly, made from
100% recycled material in the EU
8
9. Kee® Guard
Components
Counter-
CB1P Counter-weights assembly
Used with each
intermediate upright
Tube 1075mm long
2.2m or 2m centres
9
10. Kee® Guard
Components
CB2P, CB3P, CB4P, CB7P
Free end Counter-weight assemblies
Tube 1575mm long
Use dependent on edge distance, parapet up-
stand & length of run
10
11. Kee® Guard
Free end detail options
Roofs up to 10º pitch
Max bay size 2m
1. Restrained
Upright butted up
against roof up- stand
(min. 150mm) Use
CB2P End Assembly
2. Unrestrained Max bay size 2m
Min
Where roof up-stand 300mm
is less than 150mm
Use CB7P End
Assembly
11
12. Kee® Guard
Free end detail options
Roofs up to 3º pitch
1. Restrained
Upright butted up against roof up-stand (min.
150mm)
End bays 1.5 m. Use CB1P End Assembly
Max bay size 2.2m
CB1P
12
26. KeeGuard Lite Standing
®
Seam
Special fixing clamp suits most
available standing seam systems
Modular system supplied in
prefabricated kit form
Uses a non penetrative clamp
Complies with BS EN ISO 14122
Part 3
Optional colour coating in all RAL
colours available
26
27. KeeGuard Lite Standing
®
Seam
Components
Seam Clamp ( KLSSB0030 )
316 stainless steel
Two part clamp
Non-penetrative
Tightened to 20Nm
27
28. KeeGuard Lite Standing
®
Seam
Components L14-
L14-8 LB54-
LB54-88
L14-8 Straight coupling
L15-8 90º Elbow
L15-
L15-8
L19-8 Adjustable Side Outlet Tee 61-
61-8
Angles between 60-200º
LB54-88 Adjustable Elbow
L19-
L19-8
Adjustable between 45-200º C58-
C58-8
61-8 Wall fixings
C58-8 Wall fixings
28
29.
30. Topsheild
Top fix guardrail system
For metal profile roofs
Up to 10º pitch
Sealing strip ensures integrity of the roof
Galvanised to ISO 1461
30
31. Topsheild
For metal profile roofs minimum
thickness 0.7mm
Fixed using Tek screws
To suit crown centres of:
250mm, 310mm, 333mm,
400mm, 500mm
31
32. Topsheild
'D' RETURN
470MM
0.91M - 1.1M MAX.
MAX.
BAY JOINING
CONNECTORS
NOTE 2
SEE
SEE NOTE 3 2M M AX. 2M M AX. 'A'
1. BASE ASSEM BLIES M UST BE SPACED AT 2M CENTRES.
2. THE GAP BELOW THE BOTTOM RAIL SHOULD NOT EXCEED 470M M , M EASURED FROM ANY RAISED ROOF EDGE OR
'B'
PARAPET. IF THERE IS NO PARAPET, RAISED EDGE, ETC.., TOE BOARDS O F NOT LESS THAN 150M M HIGH M UST BE
FITTED.
3. W HERE THE SYSTEM IS UNDER 6M OVERALL THE BAY END M UST NOT PROTRUDE M ORE THAN 50M M FROM THE
LAST LEG. FOR ALL SYSTEM S 6M OR OVER, THE BAY END M AY PROTRUDE UP TO A M AXIM UM OF 500M M .
4. DIM ENSIONS 'A' + 'B' M UST NOT TOTAL M ORE THAN 2.5M .
SEE NOTE 3
32
33. Maintenance
The KeeGuard® systems are
virtually maintenance-free.
Replace any damaged parts
or grub screws with original
spare parts.
Use clean water for cleaning.
Use of hose or high-pressure
washer is permitted.
33
34. Sustainability
The systems are made
predominantly of ferrous and
non-ferrous metals and can
therefore be disposed of in a
scrap metal facility.
The PVC weights can be
returned to Kee Safety Ltd
for re-cycling.
34