1. Matters needing attention for the maintenance of powder
grinder mill
The regular maintenance of powder grinder mill is quite crucial
for the normal operation and high performance.Besides the
starting of the equipment,the halt operation is also very
important because the important operation will cause serious
results such as the service life of the machine may decrease
greatly.the following matters should be paid attention after the
halt of the equipment.
1.Before the temperature of the main engine and main bearing
fall to the normal temperature,it is not allowed to stop the
lubrication and water cooling system.
2.After the grinding mill stop operating jaw crusher,the user
has to connect the machine to the high pressure lifting device
so as to prevent the bearing alloy from damage because of
the cooling contraction of the grinding body.until the grinding
body cools to the normal temperature,the user can remove the
high pressure lifting device.
3.All the valves should be closed after the main engine and
2. auxiliary engine stop operating and the recorder should be
also closed timely.
4.After the grinding mill stop operating,the exhaust gas
disposal system should adjust the system pressure according
to the condition of the rotary kiln such as the opening of the
relay fan.
We should pay more attention to these issues.Proper normal
operation can reduce the possible problems appearing during
the operation of the powder grinder mill which is helpful to the
high efficiency.Therefore ,the daily maintenance and correct
operation is important for any grinding mills.
If you have any questions about powder grinder mill,or are
interested in it.Please do not hesitate to contact us.
You can contact us by this way:
http://www.hammer-crushers.net
http://www.powder-grinder.com