1) Suko Tech Co., Ltd introduces their PTFE molding machines, which mold PTFE products through processes like heating and cooling raw materials in molds. 2) Their machines come in manual, semi-automatic, and fully automatic options. Fully automatic machines are controlled by PLC and can set various molding parameters. 3) Suko has many years of experience in PTFE equipment and serves customers in industries like medical, aerospace, chemicals, and more across 40+ countries.

1. Suko Tech Co.,Ltd /Suko Polymer Machine Tech Co.,Ltd
No.5,Lvshu 3 road, Changzhou New District,
Changzhou , Jiangsu, China 213000
sammyliu@sukoptfe.com Cell:+8619975113419
www.sukoptfe.com www.sukopolymer.com 1
Introduction of PTFE Molding Machine
1. PTFE Molding Machine
PTFE (polytetrafluoroethy) is commonly known as PTFE, Teflon and Plastic King.
The Teflon Molding Machine is a machine that specializes in Molding PTFE
products.Through a series of processes such as molding, heating, and cooling, the
raw materials are processed by molding machine to produce molding products that
meet various specifications. Affected by related factors such as use, specifications,
ingredients, user requirements, etc., Suko can design and produce PTFE molding
machines of different specifications. The molding products produced by molding
machine are widely used in chemical, medical, aerospace, mechanical processing, heat
exchange and other fields.
Suko with many years of research and development experience in the field of PTFE
equipment,specializes in the research, development, production and sales of PTFE
equipment. Our equipment has served nearly forty countries and regions in the
international market. Our customers are from the medical industry, aerospace industry,
military industry, chemical industry, automotive industry and various mechanical pipe
fittings industries, and Suko has been widely recognized by the international
fluoroplastic industry. Company values: Innovation, Technology, Efficiency and
Intelligence. Company mission: To create the world's first brand of Molding equipment.
Suko deserves your trust.

2. Suko Tech Co.,Ltd /Suko Polymer Machine Tech Co.,Ltd
No.5,Lvshu 3 road, Changzhou New District,
Changzhou , Jiangsu, China 213000
sammyliu@sukoptfe.com Cell:+8619975113419
www.sukoptfe.com www.sukopolymer.com 2
2. Characteristics of PTFE Molding Machine
1. Molding Machines are divided into manual, semi-automatic and fully automatic
molding machines. Through continuous improvement of the molding press technology,
the equipment is more intelligent, more stable, and more efficient.
2. The intelligent automatic type is controlled by PLC system, to set the pressure, range,
speed, quantity, and dwell time, and the operation is simple.
3. With diverse design, the equipment can meet the different needs of users, and be
customized for customers.
4. The equipment runs stably for a long time, with lower noise. And reduces costs by
saving power and energy during pressure maintenance.
5. Equipment and molds are made by special technology, corrosion resistance, durable
and with long service life.
6. The equipment design is simple and takes up little space.
7. Molding products have superior performance in terms of density and tensile
strength with no flash, no burrs.
8. Fully automatic moulding machine, automatic powder suction,alarm when powder
out ,and counting.
9. Fast molding speed with no powder flying out, save raw material. .
10. Molding is divided into pressing methods from top to bottom, bottom to top and
simultaneous double-sided pressing.
11. Molding process can directly mold the customer's desired shape, saving
manufacturing procedure, material and process cycle.
12. Granulating material, self-flowing powder, non-self-flowing powder can be used in
molding machine.
3. Equipment Operating Environment Requirements
1. The ground of the site is required to be level, and the site load is not less than the
design requirements.
2. The operating platform needs clean space to reduce dust ingress. It is best to have
ventilation ducts in the workshop to facilitate ventilation.
3. Industrial power standard 380V 50Hz 3P, voltage can be customized according to user
needs.
4. The factory is equipped with power distribution cabinets, compressed air and other
supporting equipment.
5. The room temperature of the plant should be no more than 28 ° C.

3. Suko Tech Co.,Ltd /Suko Polymer Machine Tech Co.,Ltd
No.5,Lvshu 3 road, Changzhou New District,
Changzhou , Jiangsu, China 213000
sammyliu@sukoptfe.com Cell:+8619975113419
www.sukoptfe.com www.sukopolymer.com 3
4. Equipment Parameter
See attached table for details.
5. Equipment Installation and Mold Installation Diagram
Individually issued to customers according to specific models and sizes.
6. Equipment Operation Process
1. Check whether the equipment power-on voltage and power match, and the line
connection conforms to the wiring diagram.
2. Check the position of the hydraulic oil and check whether the hydraulic lines are
connected properly. Confirm cooling water connection and compressed air connection
3. Check whether the mold is installed correctly. Run and debug manually to confirm.
4. Turn on the power and set parameters such as pressure, holding time, and
automatic feeding setting through the PLC system.
5. Add the prepared powder to the hopper or barrel (manually or automatically).
6. Start the machine.
7. Molded product pops out automatically (large size needs to be taken out carefully).
8. Turn off the machine and clean the mold after use.
7. Equipment And mold Maintenance
1. Regularly check the height, cleanliness and temperature of the hydraulic oil.
2. It is recommended to replace the hydraulic oil every six months.
3. Replaced worn seals timely.
4. The mold should be cleaned and maintained in time, and the surface should be
coated with a thin layer of protective oil.
8. Accessories And Spare Parts Description
1. The equipment is composed of main machine, a hydraulic station, a control cabinet,
an automatic feeder, molds and other accessories. Equipment necessary accessories
are sent to customers with the equipment.
2. The list of necessary accessories for the equipment is sent to the user with the
equipment.
3. When the user purchases our company's equipment, in addition to the necessary

4. Suko Tech Co.,Ltd /Suko Polymer Machine Tech Co.,Ltd
No.5,Lvshu 3 road, Changzhou New District,
Changzhou , Jiangsu, China 213000
sammyliu@sukoptfe.com Cell:+8619975113419
www.sukoptfe.com www.sukopolymer.com 4
accessories, we will provide the necessary spare parts to the user to replace and repair
the equipment. Spare parts are standard parts and can be purchased in the local
market.
9. Process Guidance
1. Due to the special technology of the equipment, customers can go to the factory to
learn about the installation, commissioning, operation, mold change, maintenance,
process guidance of the equipment for free before delivery.
2. If you are unable to come to our company to study due to inconveniences such as
distance, personnel, time, we can arrange for engineers to come to guide the
installation, commissioning, operation, mold replacement, maintenance, and process
guidance of the equipment under the agreement of the other party.
3. We can also conduct remote guidance. Users can choose other methods such as
telephone, video, email, etc. to learn about equipment installation, commissioning,
operation, mold change, maintenance, process guidance, etc.of the equipment.
10. After Sales Service
1. From the date of receiving the machine, the warranty period of all machine
accessories is one year. We provide free maintenance guidance service during the
warranty period.
2. If there is any problem with the accessories outside the warranty period, please
contact us in time to explain the problem, and we will provide follow-up resolution
within 24 hours.
3. If we have a local distributor, we can contact the local distributor for cooperation.
4. All questions about the equipment can be consulted to us by mail, video, telephone,
etc.
Service Phone：+86-0519-83999079
11. Related Optional Equipment
Name Brief Description
Loosening Machine
To loosen the agglomerated raw materials
or powder with excessive humidity.
Powder Mixer / Powder & Auxiliary Mixer To mix powder with liquid lubricant.
Oven / Sintering furnace To heat the semi-finished products.
Recycled material crushing production line Dicer, washing machine, crusher
Please contact us for other PTFE equipment.