Polymer Pproject Journal 4
•Download as PPTX, PDF•
1 like•270 views
This document discusses polymers made for a class project. It describes polymers 8 and 9 that were created following guidelines, with polymer 9 using 5ml of water instead of 3ml in the recipe. The document also notes that polymer 2 did not turn out well as it was very crumbly, and that polymer 8 was too sticky so different ingredients were added to make it less sticky. Our mess is also noted with emojis.
Report
Share
Report
Share
Recommended
Polymer Journal 4
The students created a polymer with cornstarch that did not mix well, resulting in a hard outer layer. When microwaved for 20 seconds, the polymer softened in the center but remained hard outside, proving it could still function if mixed properly. For another attempt, they added cornstarch to a mixture of glue, water, and borax, mixing it as best they could. After coating the polymer in cornstarch to increase stretchiness, they had created a hand warmer. They also made hand coolers using more borax, finding it absorbed heat and cold but melted with too much heat.
Polymer: welcome to the future!
This document discusses the future of web development using web components and Polymer. It introduces Maria Clara Santana and her background in computer engineering and artificial intelligence research. It then explains some of the key concepts behind web components, including custom elements, HTML templates, shadow DOM, and HTML imports. Examples are given of how to use Polymer and paper elements to build interfaces that join web components with Material Design. The document encourages learning and building with Polymer and provides some resources for doing so.
Polymer PPT 3
The document summarizes polymer experiments conducted by a class. The class split a polymer in half, placing one half in the fridge and the other in the freezer to observe the effects of temperature. They also created an "oobleck slime" polymer using less glue and more cornstarch, hoping it would be less sticky. The frozen polymer became very stiff, while the fridge polymer remained flexible. The document considers different polymers for a class project.
Polymer project - Monsoon Tech
The document announces a Monsoon Tech event from September 15-25, 2014 focusing on Polymer and unlocking the next era of user interfaces. Polymer is a library that makes building applications easier by providing web components that are standards-based and allow elements to work better together without fighting the underlying platform. Using Polymer involves finding existing elements, importing them, and using them in applications or creating new custom elements.
Polymer PPT 2
The students decided to make a polymer that could be used as caps for pens and markers that had lost their original caps, as many school writing utensils dry out quickly without caps. They began experimenting with gloop slime as it was similar to the solid, play dough-like texture they desired for the caps. However, gloop slime felt wet on the surface even when dry. The students then tried altering the amounts of liquid in gloop slime polymers and compared gloop slime to a goober slime made with guar gum, but both remained too sticky.
Polymer innovation presentation
The document summarizes the work of the Polymer Innovation Team at the Institute for Innovation in Polymer Science and Sustainability (IIPSI). The team includes experts in additive manufacturing, composites, polymer processing, and recycling. They work with companies to develop new polymer products and processes through access to state-of-the-art facilities and expertise in areas like prototyping, low volume manufacturing, adding functionality, and recycling. Their goal is to help companies commercialize innovative polymer technologies.
The french revolution ppt
The Storming of the Bastille on July 14, 1789 marked a major step in the French Revolution. Hundreds of citizens attacked the Bastille prison to steal gunpowder and weapons to fight against the monarchy. While some revolutionaries like Francois died in the attack, others like the narrator were able to collect gunpowder. King Louis XVI was eventually captured and executed by guillotine on January 21, 1793. The Reign of Terror followed under Robespierre, where thousands were executed until he too was guillotined. On November 9, 1799, Napoleon crowned himself emperor of France, bringing stability after the chaos of the revolution.
Fyp slide polymer solar cells
This document provides information on a project to develop polymer:fullerene solar cells. The objectives are to study how device characteristics like thickness, absorbance, and power conversion efficiency (PCE) relate to fabrication parameters like spin speed. Characterization tools like atomic force microscopy, UV-visible spectroscopy, and a solar simulator will be used. Challenges include material sensitivity to moisture and limited fullerene supply. The device uses a layered structure of ITO/PEDOT:PSS/MEH-PPV:PCBM/TiO2 with the active layer deposited at different spin speeds for analysis.
Recommended
Polymer Journal 4
The students created a polymer with cornstarch that did not mix well, resulting in a hard outer layer. When microwaved for 20 seconds, the polymer softened in the center but remained hard outside, proving it could still function if mixed properly. For another attempt, they added cornstarch to a mixture of glue, water, and borax, mixing it as best they could. After coating the polymer in cornstarch to increase stretchiness, they had created a hand warmer. They also made hand coolers using more borax, finding it absorbed heat and cold but melted with too much heat.
Polymer: welcome to the future!
This document discusses the future of web development using web components and Polymer. It introduces Maria Clara Santana and her background in computer engineering and artificial intelligence research. It then explains some of the key concepts behind web components, including custom elements, HTML templates, shadow DOM, and HTML imports. Examples are given of how to use Polymer and paper elements to build interfaces that join web components with Material Design. The document encourages learning and building with Polymer and provides some resources for doing so.
Polymer PPT 3
The document summarizes polymer experiments conducted by a class. The class split a polymer in half, placing one half in the fridge and the other in the freezer to observe the effects of temperature. They also created an "oobleck slime" polymer using less glue and more cornstarch, hoping it would be less sticky. The frozen polymer became very stiff, while the fridge polymer remained flexible. The document considers different polymers for a class project.
Polymer project - Monsoon Tech
The document announces a Monsoon Tech event from September 15-25, 2014 focusing on Polymer and unlocking the next era of user interfaces. Polymer is a library that makes building applications easier by providing web components that are standards-based and allow elements to work better together without fighting the underlying platform. Using Polymer involves finding existing elements, importing them, and using them in applications or creating new custom elements.
Polymer PPT 2
The students decided to make a polymer that could be used as caps for pens and markers that had lost their original caps, as many school writing utensils dry out quickly without caps. They began experimenting with gloop slime as it was similar to the solid, play dough-like texture they desired for the caps. However, gloop slime felt wet on the surface even when dry. The students then tried altering the amounts of liquid in gloop slime polymers and compared gloop slime to a goober slime made with guar gum, but both remained too sticky.
Polymer innovation presentation
The document summarizes the work of the Polymer Innovation Team at the Institute for Innovation in Polymer Science and Sustainability (IIPSI). The team includes experts in additive manufacturing, composites, polymer processing, and recycling. They work with companies to develop new polymer products and processes through access to state-of-the-art facilities and expertise in areas like prototyping, low volume manufacturing, adding functionality, and recycling. Their goal is to help companies commercialize innovative polymer technologies.
The french revolution ppt
The Storming of the Bastille on July 14, 1789 marked a major step in the French Revolution. Hundreds of citizens attacked the Bastille prison to steal gunpowder and weapons to fight against the monarchy. While some revolutionaries like Francois died in the attack, others like the narrator were able to collect gunpowder. King Louis XVI was eventually captured and executed by guillotine on January 21, 1793. The Reign of Terror followed under Robespierre, where thousands were executed until he too was guillotined. On November 9, 1799, Napoleon crowned himself emperor of France, bringing stability after the chaos of the revolution.
Fyp slide polymer solar cells
This document provides information on a project to develop polymer:fullerene solar cells. The objectives are to study how device characteristics like thickness, absorbance, and power conversion efficiency (PCE) relate to fabrication parameters like spin speed. Characterization tools like atomic force microscopy, UV-visible spectroscopy, and a solar simulator will be used. Challenges include material sensitivity to moisture and limited fullerene supply. The device uses a layered structure of ITO/PEDOT:PSS/MEH-PPV:PCBM/TiO2 with the active layer deposited at different spin speeds for analysis.
Introduction to polymer project
This document introduces Polymer, an open-source JavaScript library for building web components. It discusses how Polymer uses existing web platform APIs like templates, shadow DOM, and custom elements to create reusable components. It also explains that Polymer is not a framework, but a library that can be used to build elements on top of existing standards. Finally, it provides a simple example of creating a new custom element in Polymer and emphasizes that Polymer is production-ready.
Medical Device-Polymers & Plastics
Join us in learning the newest trends and technical advances in the use of Polymeric Materials in Medical Applications; speakers are from premier institutions such as the world-class Ronald Reagan Medical Center at UCLA, ABBOTT Vascular, JOHNSON & JOHNSON-Cordis, BOSTON SCIENTIFIC, MEDTRONIC, REVA Medical, MiMEDX, BECKTON DICKINSON, ROCHE Diagnostics and more.
For Registration / Sponsorship / Details, please CLICK the link below:
http://www.MediPlastConference.com
Polymer-Conductive Wool -IDM8
Done by : bayan_Geniuses8 Group
School: Bayan Independent Sec. School for Girls
Module Polymers: Through this module, students examine the different properties of the variety of polymers. Then they design and test a humidity sensor made of a polymer film. Finally, they are asked to design their own products.
This project:
Use conductive wool to conduct electricity that are different from the fundamental materials that are often used in making wires.
Also, we use anther materials in insulating wires to improve the efficiency of the wires and reduce the electrical fires
Medical Polymers
The medical polymers market is expected to grow from $2.3 billion in 2013 to over $3.5 billion by 2018, a 52% increase. Implants will account for around $1.6 billion in polymer sales by 2018 and sales of polymers for diagnostic systems will reach $1.04 billion. PMMA, PP, and styrenics like PS make up 26% of the medical polymers market currently. Global medical polymer demand is projected to reach 6,411.7 kilo tons by 2018, growing at a CAGR of 5.6% from 2012 to 2018.
Basics of- HUMAN BIOMATERIALS, IMPLANTABLE MEDICAL DEVICES AND BIOMEDICAL SCI...
Basics of- HUMAN BIOMATERIALS, IMPLANTABLE MEDICAL DEVICES AND BIOMEDICAL SCI...Shaheed Suhrawardy Medical College
The document discusses biomaterials, bio-implants, and biomedical devices. It provides:
1) Definitions of biomaterials, bio-implants, and biomedical devices and how they interact with human tissue.
2) A brief history of the advancement of biomaterials and biomedical devices from ancient times to modern developments.
3) Classification of biomaterials into biological, synthetic, and composite categories and how they are evaluated.Biomedical polymers
This document provides an overview of biomedical polymers, including their classification, properties, applications, and selection parameters. It discusses natural polymers like collagen, cellulose, alginates, and chitosan as well as synthetic polymers such as PTFE, polyethylene, polypropylene, and PMMA. Applications highlighted include contact lenses, artificial joints, sutures, drug delivery systems, and more. The document concludes that biomedical polymers are biomaterials used for medical applications and that research continues to develop stronger and more biocompatible polymer prosthetics.
Polymer concrete
Polymer concrete is a composite material made by impregnating a conventional concrete with monomers like methyl methacrylate or styrene, then polymerizing them to fill its pores and voids. This reduces porosity and improves strength and durability properties. Three main types are polymer impregnated concrete, polymer cement concrete, and polymer concrete. Polymer impregnated concrete uses precast concrete impregnated with monomer then polymerized. It exhibits higher strength, stiffness, and durability compared to conventional concrete.
Google Polymer Framework
Introduction to Google Polymer 1.0 at JS Meetup in Athens, Greece. How Polymer builds a comprehensive front-end framework on the "Web Components" standard.
Polymers
Polymers are macromolecules formed by linking together small repeating units called monomers. There are two main types of polymerization: addition and condensation. Addition polymers are formed without the elimination of small molecules when monomers containing carbon-carbon double bonds polymerize via a chain reaction mechanism involving three steps: initiation, propagation, and termination. Condensation polymers are formed with the elimination of small molecules like water or ammonia when bifunctional monomers react. Common examples of addition polymerization include polyethylene formed from ethylene monomers using a free radical initiator like benzoyl peroxide.
21 Successful Entrepreuneurs Share their Best Advice - 2016
Check out the compilation and 'gyaan' by these successful Leaders. I wish you become a successful LEADER in 2016 ad in case you already are...be instrumental in creating someone else. Happy 2016 and stay tunes to lot's of great stuff
Compexometric titration/Chelatorphy titration/chelating titration
Classification
Metal ion ion indicators
Masking and demasking reagents
Estimation of Magnisium sulphate
Calcium gluconate
Complexometric Titration/ chelatometry titration/chelating titration, introduction, Types-
1.Direct Titration
2.Back Titration
3.Replacement Titration
4.Indirect Titration
Masking agent, Demasking agents
formation of complex
comparition between masking and demasking agents,
Indicators/Metal ion indicators/ Metallochromic indicators/pM indicators,
Visual Technique,PM indicators (metallochromic), Indicators of pH, Redox Indicators
Instrumental Techniques-Photometry
Potentiometry
Miscellaneous methods.
Complex titration with EDTA.
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Current descriptions of immersive learning cases are often difficult or impossible to compare. This is due to a myriad of different options on what details to include, which aspects are relevant, and on the descriptive approaches employed. Also, these aspects often combine very specific details with more general guidelines or indicate intents and rationales without clarifying their implementation. In this paper we provide a method to describe immersive learning cases that is structured to enable comparisons, yet flexible enough to allow researchers and practitioners to decide which aspects to include. This method leverages a taxonomy that classifies educational aspects at three levels (uses, practices, and strategies) and then utilizes two frameworks, the Immersive Learning Brain and the Immersion Cube, to enable a structured description and interpretation of immersive learning cases. The method is then demonstrated on a published immersive learning case on training for wind turbine maintenance using virtual reality. Applying the method results in a structured artifact, the Immersive Learning Case Sheet, that tags the case with its proximal uses, practices, and strategies, and refines the free text case description to ensure that matching details are included. This contribution is thus a case description method in support of future comparative research of immersive learning cases. We then discuss how the resulting description and interpretation can be leveraged to change immersion learning cases, by enriching them (considering low-effort changes or additions) or innovating (exploring more challenging avenues of transformation). The method holds significant promise to support better-grounded research in immersive learning.
waterlessdyeingtechnolgyusing carbon dioxide chemicalspdf
The technology uses reclaimed CO₂ as the dyeing medium in a closed loop process. When pressurized, CO₂ becomes supercritical (SC-CO₂). In this state CO₂ has a very high solvent power, allowing the dye to dissolve easily.
The cost of acquiring information by natural selection
This is a short talk that I gave at the Banff International Research Station workshop on Modeling and Theory in Population Biology. The idea is to try to understand how the burden of natural selection relates to the amount of information that selection puts into the genome.
It's based on the first part of this research paper:
The cost of information acquisition by natural selection
Ryan Seamus McGee, Olivia Kosterlitz, Artem Kaznatcheev, Benjamin Kerr, Carl T. Bergstrom
bioRxiv 2022.07.02.498577; doi: https://doi.org/10.1101/2022.07.02.498577
Mending Clothing to Support Sustainable Fashion_CIMaR 2024.pdf
Ozturkcan, S., Berndt, A., & Angelakis, A. (2024). Mending clothing to support sustainable fashion. Presented at the 31st Annual Conference by the Consortium for International Marketing Research (CIMaR), 10-13 Jun 2024, University of Gävle, Sweden.
Randomised Optimisation Algorithms in DAPHNE
Slides from talk:
Aleš Zamuda: Randomised Optimisation Algorithms in DAPHNE .
Austrian-Slovenian HPC Meeting 2024 – ASHPC24, Seeblickhotel Grundlsee in Austria, 10–13 June 2024
https://ashpc.eu/
8.Isolation of pure cultures and preservation of cultures.pdf
Isolation of pure culture, its various method.
Bob Reedy - Nitrate in Texas Groundwater.pdf
Presented at June 6-7 Texas Alliance of Groundwater Districts Business Meeting
Shallowest Oil Discovery of Turkiye.pptx
The Petroleum System of the Çukurova Field - the Shallowest Oil Discovery of Türkiye, Adana
The debris of the ‘last major merger’ is dynamically young
The Milky Way’s (MW) inner stellar halo contains an [Fe/H]-rich component with highly eccentric orbits, often referred to as the
‘last major merger.’ Hypotheses for the origin of this component include Gaia-Sausage/Enceladus (GSE), where the progenitor
collided with the MW proto-disc 8–11 Gyr ago, and the Virgo Radial Merger (VRM), where the progenitor collided with the
MW disc within the last 3 Gyr. These two scenarios make different predictions about observable structure in local phase space,
because the morphology of debris depends on how long it has had to phase mix. The recently identified phase-space folds in Gaia
DR3 have positive caustic velocities, making them fundamentally different than the phase-mixed chevrons found in simulations
at late times. Roughly 20 per cent of the stars in the prograde local stellar halo are associated with the observed caustics. Based
on a simple phase-mixing model, the observed number of caustics are consistent with a merger that occurred 1–2 Gyr ago.
We also compare the observed phase-space distribution to FIRE-2 Latte simulations of GSE-like mergers, using a quantitative
measurement of phase mixing (2D causticality). The observed local phase-space distribution best matches the simulated data
1–2 Gyr after collision, and certainly not later than 3 Gyr. This is further evidence that the progenitor of the ‘last major merger’
did not collide with the MW proto-disc at early times, as is thought for the GSE, but instead collided with the MW disc within
the last few Gyr, consistent with the body of work surrounding the VRM.
Pests of Storage_Identification_Dr.UPR.pdf
InIndia-post-harvestlosses-unscientificstorage,insects,rodents,micro-organismsetc.,accountforabout10percentoftotalfoodgrains
Graininfestation
Directdamage
Indirectly
•theexuviae,skin,deadinsects
•theirexcretawhichmakefoodunfitforhumanconsumption
About600speciesofinsectshavebeenassociatedwithstoredgrainproducts
100speciesofinsectpestsofstoredproductscauseeconomiclosses
11.1 Role of physical biological in deterioration of grains.pdf
Storagedeteriorationisanyformoflossinquantityandqualityofbio-materials.
Themajorcausesofdeteriorationinstorage
•Physical
•Biological
•Mechanical
•Chemical
Storageonlypreservesquality.Itneverimprovesquality.
Itisadvisabletostartstoragewithqualityfoodproduct.Productwithinitialpoorqualityquicklydepreciates
More Related Content
Viewers also liked
Introduction to polymer project
This document introduces Polymer, an open-source JavaScript library for building web components. It discusses how Polymer uses existing web platform APIs like templates, shadow DOM, and custom elements to create reusable components. It also explains that Polymer is not a framework, but a library that can be used to build elements on top of existing standards. Finally, it provides a simple example of creating a new custom element in Polymer and emphasizes that Polymer is production-ready.
Medical Device-Polymers & Plastics
Join us in learning the newest trends and technical advances in the use of Polymeric Materials in Medical Applications; speakers are from premier institutions such as the world-class Ronald Reagan Medical Center at UCLA, ABBOTT Vascular, JOHNSON & JOHNSON-Cordis, BOSTON SCIENTIFIC, MEDTRONIC, REVA Medical, MiMEDX, BECKTON DICKINSON, ROCHE Diagnostics and more.
For Registration / Sponsorship / Details, please CLICK the link below:
http://www.MediPlastConference.com
Polymer-Conductive Wool -IDM8
Done by : bayan_Geniuses8 Group
School: Bayan Independent Sec. School for Girls
Module Polymers: Through this module, students examine the different properties of the variety of polymers. Then they design and test a humidity sensor made of a polymer film. Finally, they are asked to design their own products.
This project:
Use conductive wool to conduct electricity that are different from the fundamental materials that are often used in making wires.
Also, we use anther materials in insulating wires to improve the efficiency of the wires and reduce the electrical fires
Medical Polymers
The medical polymers market is expected to grow from $2.3 billion in 2013 to over $3.5 billion by 2018, a 52% increase. Implants will account for around $1.6 billion in polymer sales by 2018 and sales of polymers for diagnostic systems will reach $1.04 billion. PMMA, PP, and styrenics like PS make up 26% of the medical polymers market currently. Global medical polymer demand is projected to reach 6,411.7 kilo tons by 2018, growing at a CAGR of 5.6% from 2012 to 2018.
Basics of- HUMAN BIOMATERIALS, IMPLANTABLE MEDICAL DEVICES AND BIOMEDICAL SCI...
Basics of- HUMAN BIOMATERIALS, IMPLANTABLE MEDICAL DEVICES AND BIOMEDICAL SCI...Shaheed Suhrawardy Medical College
The document discusses biomaterials, bio-implants, and biomedical devices. It provides:
1) Definitions of biomaterials, bio-implants, and biomedical devices and how they interact with human tissue.
2) A brief history of the advancement of biomaterials and biomedical devices from ancient times to modern developments.
3) Classification of biomaterials into biological, synthetic, and composite categories and how they are evaluated.Biomedical polymers
This document provides an overview of biomedical polymers, including their classification, properties, applications, and selection parameters. It discusses natural polymers like collagen, cellulose, alginates, and chitosan as well as synthetic polymers such as PTFE, polyethylene, polypropylene, and PMMA. Applications highlighted include contact lenses, artificial joints, sutures, drug delivery systems, and more. The document concludes that biomedical polymers are biomaterials used for medical applications and that research continues to develop stronger and more biocompatible polymer prosthetics.
Polymer concrete
Polymer concrete is a composite material made by impregnating a conventional concrete with monomers like methyl methacrylate or styrene, then polymerizing them to fill its pores and voids. This reduces porosity and improves strength and durability properties. Three main types are polymer impregnated concrete, polymer cement concrete, and polymer concrete. Polymer impregnated concrete uses precast concrete impregnated with monomer then polymerized. It exhibits higher strength, stiffness, and durability compared to conventional concrete.
Google Polymer Framework
Introduction to Google Polymer 1.0 at JS Meetup in Athens, Greece. How Polymer builds a comprehensive front-end framework on the "Web Components" standard.
Polymers
Polymers are macromolecules formed by linking together small repeating units called monomers. There are two main types of polymerization: addition and condensation. Addition polymers are formed without the elimination of small molecules when monomers containing carbon-carbon double bonds polymerize via a chain reaction mechanism involving three steps: initiation, propagation, and termination. Condensation polymers are formed with the elimination of small molecules like water or ammonia when bifunctional monomers react. Common examples of addition polymerization include polyethylene formed from ethylene monomers using a free radical initiator like benzoyl peroxide.
21 Successful Entrepreuneurs Share their Best Advice - 2016
Check out the compilation and 'gyaan' by these successful Leaders. I wish you become a successful LEADER in 2016 ad in case you already are...be instrumental in creating someone else. Happy 2016 and stay tunes to lot's of great stuff
Viewers also liked (10)
Basics of- HUMAN BIOMATERIALS, IMPLANTABLE MEDICAL DEVICES AND BIOMEDICAL SCI...
Basics of- HUMAN BIOMATERIALS, IMPLANTABLE MEDICAL DEVICES AND BIOMEDICAL SCI...
21 Successful Entrepreuneurs Share their Best Advice - 2016
21 Successful Entrepreuneurs Share their Best Advice - 2016
Recently uploaded
Compexometric titration/Chelatorphy titration/chelating titration
Classification
Metal ion ion indicators
Masking and demasking reagents
Estimation of Magnisium sulphate
Calcium gluconate
Complexometric Titration/ chelatometry titration/chelating titration, introduction, Types-
1.Direct Titration
2.Back Titration
3.Replacement Titration
4.Indirect Titration
Masking agent, Demasking agents
formation of complex
comparition between masking and demasking agents,
Indicators/Metal ion indicators/ Metallochromic indicators/pM indicators,
Visual Technique,PM indicators (metallochromic), Indicators of pH, Redox Indicators
Instrumental Techniques-Photometry
Potentiometry
Miscellaneous methods.
Complex titration with EDTA.
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Current descriptions of immersive learning cases are often difficult or impossible to compare. This is due to a myriad of different options on what details to include, which aspects are relevant, and on the descriptive approaches employed. Also, these aspects often combine very specific details with more general guidelines or indicate intents and rationales without clarifying their implementation. In this paper we provide a method to describe immersive learning cases that is structured to enable comparisons, yet flexible enough to allow researchers and practitioners to decide which aspects to include. This method leverages a taxonomy that classifies educational aspects at three levels (uses, practices, and strategies) and then utilizes two frameworks, the Immersive Learning Brain and the Immersion Cube, to enable a structured description and interpretation of immersive learning cases. The method is then demonstrated on a published immersive learning case on training for wind turbine maintenance using virtual reality. Applying the method results in a structured artifact, the Immersive Learning Case Sheet, that tags the case with its proximal uses, practices, and strategies, and refines the free text case description to ensure that matching details are included. This contribution is thus a case description method in support of future comparative research of immersive learning cases. We then discuss how the resulting description and interpretation can be leveraged to change immersion learning cases, by enriching them (considering low-effort changes or additions) or innovating (exploring more challenging avenues of transformation). The method holds significant promise to support better-grounded research in immersive learning.
waterlessdyeingtechnolgyusing carbon dioxide chemicalspdf
The technology uses reclaimed CO₂ as the dyeing medium in a closed loop process. When pressurized, CO₂ becomes supercritical (SC-CO₂). In this state CO₂ has a very high solvent power, allowing the dye to dissolve easily.
The cost of acquiring information by natural selection
This is a short talk that I gave at the Banff International Research Station workshop on Modeling and Theory in Population Biology. The idea is to try to understand how the burden of natural selection relates to the amount of information that selection puts into the genome.
It's based on the first part of this research paper:
The cost of information acquisition by natural selection
Ryan Seamus McGee, Olivia Kosterlitz, Artem Kaznatcheev, Benjamin Kerr, Carl T. Bergstrom
bioRxiv 2022.07.02.498577; doi: https://doi.org/10.1101/2022.07.02.498577
Mending Clothing to Support Sustainable Fashion_CIMaR 2024.pdf
Ozturkcan, S., Berndt, A., & Angelakis, A. (2024). Mending clothing to support sustainable fashion. Presented at the 31st Annual Conference by the Consortium for International Marketing Research (CIMaR), 10-13 Jun 2024, University of Gävle, Sweden.
Randomised Optimisation Algorithms in DAPHNE
Slides from talk:
Aleš Zamuda: Randomised Optimisation Algorithms in DAPHNE .
Austrian-Slovenian HPC Meeting 2024 – ASHPC24, Seeblickhotel Grundlsee in Austria, 10–13 June 2024
https://ashpc.eu/
8.Isolation of pure cultures and preservation of cultures.pdf
Isolation of pure culture, its various method.
Bob Reedy - Nitrate in Texas Groundwater.pdf
Presented at June 6-7 Texas Alliance of Groundwater Districts Business Meeting
Shallowest Oil Discovery of Turkiye.pptx
The Petroleum System of the Çukurova Field - the Shallowest Oil Discovery of Türkiye, Adana
The debris of the ‘last major merger’ is dynamically young
The Milky Way’s (MW) inner stellar halo contains an [Fe/H]-rich component with highly eccentric orbits, often referred to as the
‘last major merger.’ Hypotheses for the origin of this component include Gaia-Sausage/Enceladus (GSE), where the progenitor
collided with the MW proto-disc 8–11 Gyr ago, and the Virgo Radial Merger (VRM), where the progenitor collided with the
MW disc within the last 3 Gyr. These two scenarios make different predictions about observable structure in local phase space,
because the morphology of debris depends on how long it has had to phase mix. The recently identified phase-space folds in Gaia
DR3 have positive caustic velocities, making them fundamentally different than the phase-mixed chevrons found in simulations
at late times. Roughly 20 per cent of the stars in the prograde local stellar halo are associated with the observed caustics. Based
on a simple phase-mixing model, the observed number of caustics are consistent with a merger that occurred 1–2 Gyr ago.
We also compare the observed phase-space distribution to FIRE-2 Latte simulations of GSE-like mergers, using a quantitative
measurement of phase mixing (2D causticality). The observed local phase-space distribution best matches the simulated data
1–2 Gyr after collision, and certainly not later than 3 Gyr. This is further evidence that the progenitor of the ‘last major merger’
did not collide with the MW proto-disc at early times, as is thought for the GSE, but instead collided with the MW disc within
the last few Gyr, consistent with the body of work surrounding the VRM.
Pests of Storage_Identification_Dr.UPR.pdf
InIndia-post-harvestlosses-unscientificstorage,insects,rodents,micro-organismsetc.,accountforabout10percentoftotalfoodgrains
Graininfestation
Directdamage
Indirectly
•theexuviae,skin,deadinsects
•theirexcretawhichmakefoodunfitforhumanconsumption
About600speciesofinsectshavebeenassociatedwithstoredgrainproducts
100speciesofinsectpestsofstoredproductscauseeconomiclosses
11.1 Role of physical biological in deterioration of grains.pdf
Storagedeteriorationisanyformoflossinquantityandqualityofbio-materials.
Themajorcausesofdeteriorationinstorage
•Physical
•Biological
•Mechanical
•Chemical
Storageonlypreservesquality.Itneverimprovesquality.
Itisadvisabletostartstoragewithqualityfoodproduct.Productwithinitialpoorqualityquicklydepreciates
Micronuclei test.M.sc.zoology.fisheries.
Current Ms word generated power point presentation covers major details about the micronuclei test. It's significance and assays to conduct it. It is used to detect the micronuclei formation inside the cells of nearly every multicellular organism. It's formation takes place during chromosomal sepration at metaphase.
在线办理(salfor毕业证书)索尔福德大学毕业证毕业完成信一模一样
学校原件一模一样【微信：741003700 】《(salfor毕业证书)索尔福德大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Authoring a personal GPT for your research and practice: How we created the Q...
Thematic analysis in qualitative research is a time-consuming and systematic task, typically done using teams. Team members must ground their activities on common understandings of the major concepts underlying the thematic analysis, and define criteria for its development. However, conceptual misunderstandings, equivocations, and lack of adherence to criteria are challenges to the quality and speed of this process. Given the distributed and uncertain nature of this process, we wondered if the tasks in thematic analysis could be supported by readily available artificial intelligence chatbots. Our early efforts point to potential benefits: not just saving time in the coding process but better adherence to criteria and grounding, by increasing triangulation between humans and artificial intelligence. This tutorial will provide a description and demonstration of the process we followed, as two academic researchers, to develop a custom ChatGPT to assist with qualitative coding in the thematic data analysis process of immersive learning accounts in a survey of the academic literature: QUAL-E Immersive Learning Thematic Analysis Helper. In the hands-on time, participants will try out QUAL-E and develop their ideas for their own qualitative coding ChatGPT. Participants that have the paid ChatGPT Plus subscription can create a draft of their assistants. The organizers will provide course materials and slide deck that participants will be able to utilize to continue development of their custom GPT. The paid subscription to ChatGPT Plus is not required to participate in this workshop, just for trying out personal GPTs during it.
ESA/ACT Science Coffee: Diego Blas - Gravitational wave detection with orbita...
ESA/ACT Science Coffee: Diego Blas - Gravitational wave detection with orbita...Advanced-Concepts-Team
Presentation in the Science Coffee of the Advanced Concepts Team of the European Space Agency on the 07.06.2024.
Speaker: Diego Blas (IFAE/ICREA)
Title: Gravitational wave detection with orbital motion of Moon and artificial
Abstract:
In this talk I will describe some recent ideas to find gravitational waves from supermassive black holes or of primordial origin by studying their secular effect on the orbital motion of the Moon or satellites that are laser ranged.SAR of Medicinal Chemistry 1st by dk.pdf
In this presentation include the prototype drug SAR on thus or with their examples .
Syllabus of Second Year B. Pharmacy
2019 PATTERN.
快速办理(UAM毕业证书)马德里自治大学毕业证学位证一模一样
学校原件一模一样【微信：741003700 】《(UAM毕业证书)马德里自治大学毕业证学位证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
Compexometric titration/Chelatorphy titration/chelating titration
Compexometric titration/Chelatorphy titration/chelating titration
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
waterlessdyeingtechnolgyusing carbon dioxide chemicalspdf
waterlessdyeingtechnolgyusing carbon dioxide chemicalspdf
The cost of acquiring information by natural selection
The cost of acquiring information by natural selection
Mending Clothing to Support Sustainable Fashion_CIMaR 2024.pdf
Mending Clothing to Support Sustainable Fashion_CIMaR 2024.pdf
8.Isolation of pure cultures and preservation of cultures.pdf
8.Isolation of pure cultures and preservation of cultures.pdf
The debris of the ‘last major merger’ is dynamically young
The debris of the ‘last major merger’ is dynamically young
11.1 Role of physical biological in deterioration of grains.pdf
11.1 Role of physical biological in deterioration of grains.pdf
Authoring a personal GPT for your research and practice: How we created the Q...
Authoring a personal GPT for your research and practice: How we created the Q...
ESA/ACT Science Coffee: Diego Blas - Gravitational wave detection with orbita...
ESA/ACT Science Coffee: Diego Blas - Gravitational wave detection with orbita...
Polymer Pproject Journal 4
- 1. Anson Wong Snow Leopards April 8, 2015 Polymer Project Journal 3 Pictures
- 2. Polymers that we made before the last class 5
- 4. Making polymer 2 by following guidelines Didn’t turn out well; it’s very crumbly
- 5. Polymer # 8
- 6. Polymer # 9 + Water + Borax + Glue The polymer was took sticky so we added different things to try and make it less stick Same guidelines as polymer 8 but 5ml of water instead of 3ml