PoC Planning & Call for Help
•
0 likes•31 views
The document discusses a Proof of Concept (PoC) project being undertaken by the PoC Working Group of ODSA. It provides an overview of the project leadership and participants. The PoC is finalizing its architecture, which will include identified chiplets and mechanical/connector specifications. It outlines the high level schedule and key tasks through December and calls for help with PCB design, manufacturing sponsorship, and software/firmware volunteers.
Report
Share
Report
Share
Download to read offline
Recommended
Citizen Participatory Design Method Using VR and Blog
This slide is presented in CAADRIA2008 (The 13th International Conference on Computer Aided Architectural Design Research in Asia).
This research concerned the establishment of a citizen participatory design
method using VR and CGM. For this, problems in the citizen participatory design are
addressed, and the continuous study method using VR and a blog is shown. Then, evaluation
is conducted by considering an actual design project as a case study. Furthermore, VR
functions needed through the case study are developed. Using this method, a small patio
on which parasols were permanently and lawfully set up on a road lot was completed.
ODSA Workshop
Overview of the first ODSA Workshop 2019. The charter of the ODSA (Open Domain Specification Architecture) Workgroup is to define an open specification that enables building of Domain Specific Accelerator silicon using best-of-breed components from the industry made available as chiplet dies that can be integrated together as Lego blocks on an organic substrate packaging layer. The resulting multi-chip module (MCM) silicon can be produced at significantly lower development and manufacturing costs, and will deliver much needed performance per watt and performance per dollar efficiencies in networking, security, machine learning and other applications. The ODSA Workgroup also intends to deliver implementations of the specification as board-level prototypes, RTL code and libraries.
Technology and Architecture Committee meeting slides 10.06.14
The October meeting agenda of the EarthCube Technology and Architecture Standing Committee included:
1) Welcome and introductions
2) Announcement of new committee representatives
3) Discussion of the committee's internal leadership structure and responsibilities, including coordinating with other groups, monitoring working groups, and sponsoring new working groups.
4) Review of timelines for upcoming milestones and deliverables and discussion of future meeting schedules.
20200522 computational bim community of practice
The Computational BIM Community of Practice aims to promote the widespread use of computational BIM through various activities:
- Monthly small group discussions explore how visual programming can solve work problems.
- Bi-monthly public sessions demonstrate solutions for awareness and panel discussions.
- Intensive 2-day workshops build skills in scripting with hands-on exercises.
- Upcoming events include webinars on generative design, code compliance using Python, and computational BIM for facilities management.
Create great cncf user base from lessons learned from other open source com...
Create great cncf user base from lessons learned from other open source communities - Some best practices from other open source communities included.
AHM 2014: EarthCube Architecture Forum Introduction
Introduction to the afternoon Architecture Forum Session on Day 1, June 24 at the EarthCube All-Hands Meeting
01 bim project_execution_planning_guide_v2.1
This document provides an overview of the process for developing a Building Information Modeling (BIM) Project Execution Plan. It discusses why project teams should create a detailed plan to maximize the benefits of BIM implementation. The four-step BIM Project Execution Planning Procedure involves identifying high-value BIM uses, designing the BIM execution process through process mapping, defining information exchanges, and developing infrastructure to support the implementation. Creating a well-planned BIM Project Execution Plan ensures all parties understand their roles and responsibilities to effectively incorporate BIM into the project workflow.
Bim Tech Users Group : Kick-Off - Glasgow
Initial presentation outlining the aims and objectives of the new BIM Tech Users Group which is part of the BIM Suppliers Group.
Recommended
Citizen Participatory Design Method Using VR and Blog
This slide is presented in CAADRIA2008 (The 13th International Conference on Computer Aided Architectural Design Research in Asia).
This research concerned the establishment of a citizen participatory design
method using VR and CGM. For this, problems in the citizen participatory design are
addressed, and the continuous study method using VR and a blog is shown. Then, evaluation
is conducted by considering an actual design project as a case study. Furthermore, VR
functions needed through the case study are developed. Using this method, a small patio
on which parasols were permanently and lawfully set up on a road lot was completed.
ODSA Workshop
Overview of the first ODSA Workshop 2019. The charter of the ODSA (Open Domain Specification Architecture) Workgroup is to define an open specification that enables building of Domain Specific Accelerator silicon using best-of-breed components from the industry made available as chiplet dies that can be integrated together as Lego blocks on an organic substrate packaging layer. The resulting multi-chip module (MCM) silicon can be produced at significantly lower development and manufacturing costs, and will deliver much needed performance per watt and performance per dollar efficiencies in networking, security, machine learning and other applications. The ODSA Workgroup also intends to deliver implementations of the specification as board-level prototypes, RTL code and libraries.
Technology and Architecture Committee meeting slides 10.06.14
The October meeting agenda of the EarthCube Technology and Architecture Standing Committee included:
1) Welcome and introductions
2) Announcement of new committee representatives
3) Discussion of the committee's internal leadership structure and responsibilities, including coordinating with other groups, monitoring working groups, and sponsoring new working groups.
4) Review of timelines for upcoming milestones and deliverables and discussion of future meeting schedules.
20200522 computational bim community of practice
The Computational BIM Community of Practice aims to promote the widespread use of computational BIM through various activities:
- Monthly small group discussions explore how visual programming can solve work problems.
- Bi-monthly public sessions demonstrate solutions for awareness and panel discussions.
- Intensive 2-day workshops build skills in scripting with hands-on exercises.
- Upcoming events include webinars on generative design, code compliance using Python, and computational BIM for facilities management.
Create great cncf user base from lessons learned from other open source com...
Create great cncf user base from lessons learned from other open source communities - Some best practices from other open source communities included.
AHM 2014: EarthCube Architecture Forum Introduction
Introduction to the afternoon Architecture Forum Session on Day 1, June 24 at the EarthCube All-Hands Meeting
01 bim project_execution_planning_guide_v2.1
This document provides an overview of the process for developing a Building Information Modeling (BIM) Project Execution Plan. It discusses why project teams should create a detailed plan to maximize the benefits of BIM implementation. The four-step BIM Project Execution Planning Procedure involves identifying high-value BIM uses, designing the BIM execution process through process mapping, defining information exchanges, and developing infrastructure to support the implementation. Creating a well-planned BIM Project Execution Plan ensures all parties understand their roles and responsibilities to effectively incorporate BIM into the project workflow.
Bim Tech Users Group : Kick-Off - Glasgow
Initial presentation outlining the aims and objectives of the new BIM Tech Users Group which is part of the BIM Suppliers Group.
Kaden_Zian_CIV_FinalReport
This document describes a student project analyzing water supply and sewerage networks for a subdivision. It includes:
1. An overview of relevant codes and standards for water supply and sewerage design in Australia.
2. A description of the initial process of designing the water and sewerage networks by hand and inputting them into AutoCAD software.
3. An analysis and comparison of the water supply network using first principles calculations, H20Map software, and EPANET software. Discrepancies between the different analysis methods are investigated.
4. An analysis and comparison of the sewerage network using first principles calculations and EPA SWMM software. Again, any discrepancies are examined.
SE_conf2 Tomer and Ram final
The document discusses two approaches to system engineering and software architecture integration: the glue approach and the connector approach. Under the glue approach, software is seen as the "glue" that connects together hardware parts, resulting in software delays and difficulties reusing code. The connector approach involves software architects earlier in system design, shaping both hardware and software together as connectors. This allows for more flexibility, reuse, and addressing quality requirements throughout the system development process. The presentation argues the connector approach better fits Orbotech's environment and is their preferred method going forward.
AHM 2014: Conceptual Design
Presentation given in the afternoon Architecture Forum Session on Day 1, June 24, at the EarthCube All-Hands Meeting.
Community Webinar: Tune up for AGU
EarthCube Community Webinar held Tuesday, Dec. 9th at 11:00 PST/2:00 EST for a virtual kick-off of the new 'Demonstration Phase' of EarthCube, including statements from your Leadership Council members and an update from NSF Program Officer, Eva Zanzerkia.
Creating a Culture OF UX
Brad Briscoe presented on creating a culture of UX innovation through development communities and sub-communities. He outlined the current fragmented state and proposed formalizing sub-communities for different architecture patterns to improve knowledge sharing. This would include assigning chairs, having dedicated membership, and conducting code/design reviews. The sub-communities would collaborate under an overarching development community forum to further share insights across teams. Implementation would require Application Delivery commitment and defining membership, communication plans, and timelines. The goal is to mature development practices through collaborative sharing.
Innovate uxi community_3b
Brad Briscoe presented on creating a culture of UX innovation through development communities and sub-communities. He outlined the current fragmented state and proposed formalizing sub-communities for different architecture patterns to improve knowledge sharing. This would include assigning chairs, having dedicated membership, and conducting code/design reviews. The sub-communities would collaborate under an overarching development community forum to further share insights across teams. Implementation would require Application Delivery commitment and defining membership, communication plans, and timelines. The goal is to mature development practices through collaborative sharing.
SEM 6 : STUDIO PROJECT 1A
This document provides the brief for Project 1a of the Architectural Design Project studio course. Project 1a involves pre-design analysis for a proposed architectural design project. Students must analyze the site context, user needs, precedents, and regulatory requirements to develop a program brief and 10-15 minute multimedia presentation. The objectives are to formulate a program brief and conduct contextual and user analysis. Students will analyze the site, context, user group, cultural influences, and restrictions to inform their design approach. They must research precedents and comply with local guidelines. The expected output is a multimedia presentation covering site background, analysis, program brief, precedents, and user/regulatory research. The project will be assessed based on the quality
ADP - PROJ 1A BRIEF
This document provides the project brief for Project 1a of the Architectural Design Project module. Project 1a involves pre-design analysis for a proposed architectural design project. Students must analyze the site context, user needs, precedents, and regulatory requirements to develop a program brief and 10-15 minute multimedia presentation. The objectives are to formulate a program brief and conduct contextual and user analysis. Students will analyze the site, user group, cultural context, restrictions, and precedents to inform their design strategies. They must consider guidelines for the project scope, which include building size, parking, and compliance with planning requirements. The presentation will be assessed based on the quality of the analysis, brief, and presentation. It is due on September
Create Great CNCF User-Base from Lessons Learned from Other Open Source Commu...
The document discusses best practices for building communities around open source projects based on lessons learned from other successful open source communities like Apache, Docker, Eclipse, Cloud Foundry, OpenStack, ODL/ONOS, Linux Foundation, and Kubernetes. It provides examples of community activities from these projects that could be adopted by CNCF communities, such as meetups, test beds, certification programs, equal opportunity initiatives, and ambassador reporting. The document calls for a discussion on further developing CNCF communities.
Sakai Development Process
The document proposes a new Sakai development process with the following key elements:
1) A Product Council will be established to decide what is included in official Sakai releases based on objective criteria and an open process.
2) A more managed product development process will be used for development teams with project management, schedules, and functional leadership.
3) Independent and incubation projects will still be possible and encouraged but will need to meet certain criteria to graduate to official releases.
Unit2 scheduling wbs_network
The purpose of Project Monitoring and Control is to provide actions to be taken when the project’s performance deviates significantly from the plan.
Unit2 scheduling wbs_network Management
Scope Management
Ensuring that the project includes all the work required, only the work required.
Dividing the work into major pieces, then subdividing into smaller, more manageable pieces.
4th Power Grid Model Meet-up main slides
This document summarizes an agenda for a Power Grid Model meet-up on December 7th, 2023. The agenda includes an opening by Tony Xiang, two presentations on predicting future network congestion and online feedback optimization, community announcements from Peter Salemink, and a closing by Tony Xiang. There will also be discussions on short circuit calculations, serialization, documentation improvements, and features/improvements requested by the community.
20121206i jac so n project board presentation
1. The document outlines the agenda for a project board meeting to discuss the JACSoN project, including reviewing progress to date on developing a demonstration of a new collaboration portal.
2. To date, the demonstration has integrated mailing list management, single sign-on access to collaboration groups, and standardized collaboration tools.
3. The board will discuss options for the future of the project, including maintaining the current system, redeveloping it using new technologies, or creating a full service based on use cases from the research community.
Putting Users in UX: Research Methods for Design
Better understand how to involve your target audiences during the design phase. Learn more about the research methods needed to ensure your target users will understand your product and can use it with ease before you invest time and money into the costly development phase.
Topics:
- Setting research objectives for the design phase
- Bringing your users into hands-on collaborative design activities such as paper-prototyping and card sorting
- Evaluating your design with users through usability testing, including in-person and remote testing
- Some of the tools available, including automated testing tools
Sakai Technical Future Musings
This was my 'last lecture' as the Sakai Executive Director at the 2007 Amsterdam conference where I just looked forward and postulated things that I thought should be done without taking any responsibility for actually doing them.
ODSA - Business Workstream
The document discusses the formation of a new subgroup within ODSA focused on developing open standards for system-in-package solutions using chiplet technology. The subgroup aims to define an open architectural interface to allow best-of-breed chiplets from multiple vendors to be used together. It outlines several workstreams for participants to join related to developing the interface standards, building proof-of-concept demonstrations, and defining business and intellectual property models. A survey is also discussed that gathers input on drivers and barriers for adopting chiplet and system-in-package technologies as well as supply chain considerations.
From Waterfall to Agile - Six Months In
Case study detailing the transition from Waterfall to Agile. Presented at the Next Generation Testing Conference, November 2011
SOFTWARES FOR CIVIL ENGINEERS and BIM by SATHISH
This document provides an overview of various civil engineering software applications. It begins by stating the objectives of the session, which are to create awareness of software used by civil engineers, understand real-world problems through software visualizations, share information about free software and resources, and motivate the use of software in classrooms. It then discusses software used in various civil engineering domains like structural engineering, construction management, transportation engineering, and geotechnical engineering. For structural engineering, it focuses on software for modeling, analysis, design, and detailing of reinforced concrete and steel structures. It also discusses building information modeling (BIM) and provides examples of structural analysis done using software. In the end, it mentions that many software are available for free for
Software Project Management: Project Summary
Software Project Management: ResearchColab- Project Summary (Document-13)
Presented in 4th year of Bachelor of Science in Software Engineering (BSSE) course at Institute of Information Technology, University of Dhaka (IIT, DU).
ODSA DirectConnect Options for the PoC
The document discusses Firefly DirectConnect options for an ODSA proof of concept. It describes Firefly's small size and ability to fit 4 modules across a 50mm package edge. Firefly offers high performance through direct connection to the silicon package, eliminating signal distortion, and is more power efficient than QSFP28 while enabling 56G PAM4 transmission. Both optical and copper Firefly modules can plug into the same mid-board connector slot, providing flexibility.
ODSA PoC Physical Design Elements
The document discusses plans for a proof-of-concept multi-chiplet package. It will include an 8-layer flip chip ball grid array substrate containing chiplets, optical/electrical connectors, and decoupling capacitors. It also proposes an early software development vehicle using equivalent chips on a printed circuit board to speed up software and test development while hardware is being designed. Developing the package involves tasks like design, simulation, fabrication, assembly, and reporting. The schedule estimates timelines for the various stages including substrate fabrication, assembly, design reviews, and simulations.
More Related Content
Similar to PoC Planning & Call for Help
Kaden_Zian_CIV_FinalReport
This document describes a student project analyzing water supply and sewerage networks for a subdivision. It includes:
1. An overview of relevant codes and standards for water supply and sewerage design in Australia.
2. A description of the initial process of designing the water and sewerage networks by hand and inputting them into AutoCAD software.
3. An analysis and comparison of the water supply network using first principles calculations, H20Map software, and EPANET software. Discrepancies between the different analysis methods are investigated.
4. An analysis and comparison of the sewerage network using first principles calculations and EPA SWMM software. Again, any discrepancies are examined.
SE_conf2 Tomer and Ram final
The document discusses two approaches to system engineering and software architecture integration: the glue approach and the connector approach. Under the glue approach, software is seen as the "glue" that connects together hardware parts, resulting in software delays and difficulties reusing code. The connector approach involves software architects earlier in system design, shaping both hardware and software together as connectors. This allows for more flexibility, reuse, and addressing quality requirements throughout the system development process. The presentation argues the connector approach better fits Orbotech's environment and is their preferred method going forward.
AHM 2014: Conceptual Design
Presentation given in the afternoon Architecture Forum Session on Day 1, June 24, at the EarthCube All-Hands Meeting.
Community Webinar: Tune up for AGU
EarthCube Community Webinar held Tuesday, Dec. 9th at 11:00 PST/2:00 EST for a virtual kick-off of the new 'Demonstration Phase' of EarthCube, including statements from your Leadership Council members and an update from NSF Program Officer, Eva Zanzerkia.
Creating a Culture OF UX
Brad Briscoe presented on creating a culture of UX innovation through development communities and sub-communities. He outlined the current fragmented state and proposed formalizing sub-communities for different architecture patterns to improve knowledge sharing. This would include assigning chairs, having dedicated membership, and conducting code/design reviews. The sub-communities would collaborate under an overarching development community forum to further share insights across teams. Implementation would require Application Delivery commitment and defining membership, communication plans, and timelines. The goal is to mature development practices through collaborative sharing.
Innovate uxi community_3b
Brad Briscoe presented on creating a culture of UX innovation through development communities and sub-communities. He outlined the current fragmented state and proposed formalizing sub-communities for different architecture patterns to improve knowledge sharing. This would include assigning chairs, having dedicated membership, and conducting code/design reviews. The sub-communities would collaborate under an overarching development community forum to further share insights across teams. Implementation would require Application Delivery commitment and defining membership, communication plans, and timelines. The goal is to mature development practices through collaborative sharing.
SEM 6 : STUDIO PROJECT 1A
This document provides the brief for Project 1a of the Architectural Design Project studio course. Project 1a involves pre-design analysis for a proposed architectural design project. Students must analyze the site context, user needs, precedents, and regulatory requirements to develop a program brief and 10-15 minute multimedia presentation. The objectives are to formulate a program brief and conduct contextual and user analysis. Students will analyze the site, context, user group, cultural influences, and restrictions to inform their design approach. They must research precedents and comply with local guidelines. The expected output is a multimedia presentation covering site background, analysis, program brief, precedents, and user/regulatory research. The project will be assessed based on the quality
ADP - PROJ 1A BRIEF
This document provides the project brief for Project 1a of the Architectural Design Project module. Project 1a involves pre-design analysis for a proposed architectural design project. Students must analyze the site context, user needs, precedents, and regulatory requirements to develop a program brief and 10-15 minute multimedia presentation. The objectives are to formulate a program brief and conduct contextual and user analysis. Students will analyze the site, user group, cultural context, restrictions, and precedents to inform their design strategies. They must consider guidelines for the project scope, which include building size, parking, and compliance with planning requirements. The presentation will be assessed based on the quality of the analysis, brief, and presentation. It is due on September
Create Great CNCF User-Base from Lessons Learned from Other Open Source Commu...
The document discusses best practices for building communities around open source projects based on lessons learned from other successful open source communities like Apache, Docker, Eclipse, Cloud Foundry, OpenStack, ODL/ONOS, Linux Foundation, and Kubernetes. It provides examples of community activities from these projects that could be adopted by CNCF communities, such as meetups, test beds, certification programs, equal opportunity initiatives, and ambassador reporting. The document calls for a discussion on further developing CNCF communities.
Sakai Development Process
The document proposes a new Sakai development process with the following key elements:
1) A Product Council will be established to decide what is included in official Sakai releases based on objective criteria and an open process.
2) A more managed product development process will be used for development teams with project management, schedules, and functional leadership.
3) Independent and incubation projects will still be possible and encouraged but will need to meet certain criteria to graduate to official releases.
Unit2 scheduling wbs_network
The purpose of Project Monitoring and Control is to provide actions to be taken when the project’s performance deviates significantly from the plan.
Unit2 scheduling wbs_network Management
Scope Management
Ensuring that the project includes all the work required, only the work required.
Dividing the work into major pieces, then subdividing into smaller, more manageable pieces.
4th Power Grid Model Meet-up main slides
This document summarizes an agenda for a Power Grid Model meet-up on December 7th, 2023. The agenda includes an opening by Tony Xiang, two presentations on predicting future network congestion and online feedback optimization, community announcements from Peter Salemink, and a closing by Tony Xiang. There will also be discussions on short circuit calculations, serialization, documentation improvements, and features/improvements requested by the community.
20121206i jac so n project board presentation
1. The document outlines the agenda for a project board meeting to discuss the JACSoN project, including reviewing progress to date on developing a demonstration of a new collaboration portal.
2. To date, the demonstration has integrated mailing list management, single sign-on access to collaboration groups, and standardized collaboration tools.
3. The board will discuss options for the future of the project, including maintaining the current system, redeveloping it using new technologies, or creating a full service based on use cases from the research community.
Putting Users in UX: Research Methods for Design
Better understand how to involve your target audiences during the design phase. Learn more about the research methods needed to ensure your target users will understand your product and can use it with ease before you invest time and money into the costly development phase.
Topics:
- Setting research objectives for the design phase
- Bringing your users into hands-on collaborative design activities such as paper-prototyping and card sorting
- Evaluating your design with users through usability testing, including in-person and remote testing
- Some of the tools available, including automated testing tools
Sakai Technical Future Musings
This was my 'last lecture' as the Sakai Executive Director at the 2007 Amsterdam conference where I just looked forward and postulated things that I thought should be done without taking any responsibility for actually doing them.
ODSA - Business Workstream
The document discusses the formation of a new subgroup within ODSA focused on developing open standards for system-in-package solutions using chiplet technology. The subgroup aims to define an open architectural interface to allow best-of-breed chiplets from multiple vendors to be used together. It outlines several workstreams for participants to join related to developing the interface standards, building proof-of-concept demonstrations, and defining business and intellectual property models. A survey is also discussed that gathers input on drivers and barriers for adopting chiplet and system-in-package technologies as well as supply chain considerations.
From Waterfall to Agile - Six Months In
Case study detailing the transition from Waterfall to Agile. Presented at the Next Generation Testing Conference, November 2011
SOFTWARES FOR CIVIL ENGINEERS and BIM by SATHISH
This document provides an overview of various civil engineering software applications. It begins by stating the objectives of the session, which are to create awareness of software used by civil engineers, understand real-world problems through software visualizations, share information about free software and resources, and motivate the use of software in classrooms. It then discusses software used in various civil engineering domains like structural engineering, construction management, transportation engineering, and geotechnical engineering. For structural engineering, it focuses on software for modeling, analysis, design, and detailing of reinforced concrete and steel structures. It also discusses building information modeling (BIM) and provides examples of structural analysis done using software. In the end, it mentions that many software are available for free for
Software Project Management: Project Summary
Software Project Management: ResearchColab- Project Summary (Document-13)
Presented in 4th year of Bachelor of Science in Software Engineering (BSSE) course at Institute of Information Technology, University of Dhaka (IIT, DU).
Similar to PoC Planning & Call for Help (20)
Create Great CNCF User-Base from Lessons Learned from Other Open Source Commu...
Create Great CNCF User-Base from Lessons Learned from Other Open Source Commu...
More from jennimenni
ODSA DirectConnect Options for the PoC
The document discusses Firefly DirectConnect options for an ODSA proof of concept. It describes Firefly's small size and ability to fit 4 modules across a 50mm package edge. Firefly offers high performance through direct connection to the silicon package, eliminating signal distortion, and is more power efficient than QSFP28 while enabling 56G PAM4 transmission. Both optical and copper Firefly modules can plug into the same mid-board connector slot, providing flexibility.
ODSA PoC Physical Design Elements
The document discusses plans for a proof-of-concept multi-chiplet package. It will include an 8-layer flip chip ball grid array substrate containing chiplets, optical/electrical connectors, and decoupling capacitors. It also proposes an early software development vehicle using equivalent chips on a printed circuit board to speed up software and test development while hardware is being designed. Developing the package involves tasks like design, simulation, fabrication, assembly, and reporting. The schedule estimates timelines for the various stages including substrate fabrication, assembly, design reviews, and simulations.
ODSA PoC: Network Flow Processor Overview
The document discusses a proposed network flow processor device for an ODSA proof of concept. It would include hardware accelerators for compute-intensive functions, high-performance distributed mesh fabric for multi-terabit bandwidth between processing elements, and tightly coupled memory engines and banks. It would provide optimal multi-threading between processing cores, hardware accelerators, and memory banks with the highest multi-threading silicon architecture. The device would extend Netronome's switch fabric using logic blocks interconnected by a terabit switch fabric and include an instruction-driven switch fabric for asynchronous memory traffic.
ODSA NXP Presentation
The document describes the NXP Layerscape series of multicore ARM-based system-on-chip families. It offers a broad portfolio of SoCs that provide scalability and flexibility across performance, power efficiency, and cost. The LX2160 SoC is highlighted which features a 64-bit ARM Cortex-A72 multicore processor with 16 cores, integrated networking and security accelerators, high-speed interfaces including 100GbE Ethernet, and memory and peripheral controllers. It provides scalable performance for data-intensive applications while maintaining competitive power and cost advantages over alternative architectures.
PoC Requirements and Use Cases
The document discusses requirements for a proof-of-concept (POC) involving a smart network interface card (NIC) and computational storage solutions. It proposes using an FPGA, network processor, and CPU module connected via PCIe and Ethernet to demonstrate different POC configurations for the smart NIC and computational storage, including as a standalone device, bump-in-the-wire, and with a data accelerator. The POC aims to validate interfaces and protocols, evaluate performance, and develop software models while exploring challenges of chiplet integration and business aspects of collaboration.
ODSA Speedster22i FPGA for POC
The document discusses the Speedster22i HD1000 FPGA from Achronix, an older FPGA design that started shipping in 2013. It features 700,000 programmable logic units running up to 750 MHz, along with 40G Ethernet connectivity via three 40G links, PCIe Gen3 x8 support via two controllers, and DDR3 memory via six channels.
ODSA Design Tools for Chiplet-Based Design
The document discusses tools needed for chiplet-based integrated circuit design. It notes that while EDA companies offer many necessary design tools, they are currently offered piecemeal. Standards for defining chiplets electrically, mechanically, and thermally would help enable a chiplet marketplace. zGlue has developed a data exchange format for defining chiplets and their mechanical I/O, and power specifications to allow chiplet vendors to list their products while maintaining access control. The document promotes zGlue's ChipBuilder software and shuttle prototype program for designing with chiplets.
ODSA Power and Heat
The document discusses power distribution and thermal management challenges for future chiplet-based architectures. It describes the current power architecture for Intel cores that uses a 1.8V input converted to an unregulated 0.9V supply. Future architectures could use local PMICs/chiplets with higher 3.3V or 5V inputs to reduce pins and separate analog and digital power domains, though conversion losses would need to be dissipated. An active interposer could provide these conversion functions but poses technology and heat dissipation challenges. Thermal budgeting and local heating effects will also require power/thermal controllers and temperature sensors to manage chiplet performance. Chiplet specifications like voltage, current, thermal resistance, and interface are important to
ODSA PIPE Adapters
This document discusses the need for PIPE adapters to allow chiplet-based designs to function as a single die. It notes that while several high-speed SerDes exist, none directly support the PIPE interface which was developed by Intel for PCIe. PIPE adapters would be needed to divide the PIPE interface into multiple lanes that could be supported by the SerDes, which generally have higher speeds than individual PCIe lanes. The document outlines how a Kandou PIPE adapter would work and notes that while the complexity is less than the SerDes, PIPE adapters have not yet been developed into products and test chips would be useful to develop the interfaces.
ODSA PHY Layer
The document discusses proposals for a standard physical layer interface to enable high data rate connections between chiplet products from different sources. Seven interface options are being considered, including AIB, silicon interposer, various parallel and SERDES-based approaches. Metrics for comparing the options are discussed, such as cost, performance, and design/integration complexity. Relative ratings of the options are provided based on initial discussions, and feedback is sought on priority metrics for different target markets. The goal is to propose an interface standard to facilitate chiplet-based product development.
ODSA BoW: Basic, Fast, Turbo Die to Die Open Interface Solutions
The document proposes the Bow interface standard for chiplet-based systems. Bow would use simple CMOS IO to enable communication between dies up to 4Gbps per line untetherminated (Bow Basic), up to 12Gbps per line with termination (Bow Fast), and bidirectional up to 2x12Gbps per line with hybrid termination (Bow Turbo). It details the motivation and benefits of Bow, provides example configurations and power estimates, and discusses testing and calls for volunteers to help define the open standard. Measurements from prototype silicon demonstrate error-free communication up to 25Gbps using the Bow Turbo concept.
More from jennimenni (11)
ODSA BoW: Basic, Fast, Turbo Die to Die Open Interface Solutions
ODSA BoW: Basic, Fast, Turbo Die to Die Open Interface Solutions
Recently uploaded
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Recently uploaded (20)
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
PoC Planning & Call for Help
- 1. Consume. Collaborate. Contribute.Consume. Collaborate. Contribute. PoC Planning & Call for Help PoC WG ODSA 3/28/2019
- 2. Consume. Collaborate. Contribute. • PoC Committee Chair: Quinn Jacobson (Achronix) – Architecture Jawad Nasrullah (zGlue) – Implementation • PoC Active Participants: Bapi Vinnakota (Netronome) – Architecture Larry Zu (Sarcina) – Design Chunli Cai (Netronome) – Design Marc Verdiell (Samtec) – Design Sam Fuller (NXP) – Architecture More participation welcome Contributors 2
- 3. Consume. Collaborate. Contribute. Architecture • Application Identified • Architecture Getting Finalized: i. Chiplets Identified ii. Mechanical form factor and connectors identified Design TBD Manufacturing TBD Software TBD PoC I Progress 3
- 4. Consume. Collaborate. Contribute. PoC High Level Schedule 4 Tasks Mar Apr May Jun Jul Aug Sep Oct Nov Dec Ask For Help Architecture and Overall Design Needs PCB design help Manufacturing PoC Mockup PCB PoC Mfg Need Production Sponsorship Software/Firmware (Bring UP and demo) volunteer developers needed
- 5. Consume. Collaborate. Contribute. 1. PoC MockUp on PCB to Facilitate advance software development 2. Package Design and Manufacturing 3. Linecard PCB Design and Manufacturing 4. Software Development Key Activities 5
- 6. Consume. Collaborate. Contribute. 1. Fabrication and Assembly Sponsorship Needed 2. PCB Design and Bring UP volunteer needed 3. Software Development Volunteers Needed 1. NFP FW 2. FPGA RTL 3. Host Driver 4. RISC CPU SW 5. Integration Activity 6. Host App Software Help Needed 6