Pipe fitting . in Instrument tube-fittings-valves manufatuers, supplier, dealer in mumbai ,india , saudi arabia
Pipe fitting . in Instrument tube-fittings-valves manufatuers, supplier, dealer in mumbai ,india , saudi arabia
This document provides information about Fujian Tongyue Pipe Fittings Co., Ltd., including:
1. The company address and website.
2. An overview of the copper fittings and pipes they produce, listing various sizes and types.
3. Details on advantages of their disperse pipes, such as thicker tees, uniform welding, and pressure testing.
4. Charts listing pipe sizes for different models of air conditioner and heat pump pipes.
So in summary, this document outlines the product offerings and quality advantages of a Chinese manufacturer of copper fittings and pipes.
This document provides specifications for A-M series copper tube crimping lugs for connecting copper conductors. It includes:
- Dimensions and mechanical properties of the copper tube used to manufacture the lugs to provide efficient conductivity and strength.
- Details of an annealing process used to guarantee optimum ductility and avoid cracking or breaks when the lugs are compressed or bent during installation or subjected to vibration.
- A table listing over 60 individual lug models ranging from 0.25-240 mm2 in conductor size, with corresponding dimensions, recommended crimping tools, and packaging quantities.
Cembre 2 hole copper tube crimp lugs feature extended palm with two fixing holes at 44.5mm centres. Cembre two hole cable lugs suit stranded copper conductors 25sqmm, 35sqmm, 50sqmm, 70sqmm, 95sqmm, 120sqmm, 150sqmm, 185sqmm, 240sqmm, 300sqmm, 400sqmm, 500sqmm and 630sqmm cables.
Cembre 2 Hole Copper Tube Terminal Lugs are designed for both low and high voltage cable termination up to 33kV. Manufactured from high purity copper tube, annealed and tin-plated - the extended Cembre cable lug barrel enhances electrical and mechanical performance while the absence of an inspection hole prevents moisture entry into the crimped joint or termination. Featuring an extended palm with two fixing holes at 44.5mm centres.
Cembre A-M range of copper tube cable lugs to terminate stranded copper conductors feature contained palms for circuit breakers with reduced space terminal blocks - the contained palm width lug allows an immediate and easier cable termination. The cable lug barrel is provided with an internal taper to ease the introduction of the conductor - Cembre copper cable lugs are annealed to guarantee optimum ductility and are tin-plated. Cembre ring tongue terminals with contained palms suit 10sqmm, 16sqmm, 25sqmm, 35sqmm, 50sqmm 70sqmm, 95sqmm, 120sqmm, 150sqmm, 185sqmm, 240sqmm and 300sqmm.
Cembre A4-ESI 4 hole transformer cable lugs are suitable for crimpingstranded copper conductors, 185-800sqmm. Cembre transformer cable lugs feature 4 x M8 holes on 25mm x 35mm centres.
Cembre A-4ESI transformer cable lugs are made from high purity electrolytic copper tube, annealed and tin plated. 4 hole copper tube transformer cable lugs can be produced to customer specification and drilled hole requirements.
Cembre Cable Lugs - 4 Hole Transformer Cable Lugs
Cembre cable lugs for transformer applications are rated up to 11kV for high voltage cable termination. T&D UK are stockist distributors for the complete range of Cembre crimping lugs, electrical connectors, cable crimping tools and cable cutting tools.
Case cx460 crawler excavator parts catalogue manualfjjkekfksemmm
This document contains parts lists and descriptions for an engine mounting system, air filtration system, exhaust system, radiator/water circuit, and other engine components of a CX460 CASE crawler excavator. It lists part numbers, quantities, and descriptions for each component. Reference numbers link to additional documentation for sub-components and instructions.
Cembre PVC insulated blade terminals (red 0.25-1.5sqmm, blue 1.5-2.5sqmm, yellow 4-6sqmm) - installed using Cembre HP3 ratchet crimp tool.
Cembre Specification, PVC Insulated Blade Terminals
The unique funnel shape of PVC sleeve, guarantees total insertion of the conductor strands into the crimp terminal barrel creating a secure, reliable, electrical and mechanical crimped connection. The internal surface of the crimp terminal barrel is rifled to improve contact with conductor strands when crimped and to increase tensile strength. The “F” range of Cembre crimp terminals offer a wide selection of rings, forks, pins and blades.
The document describes a range of "P" electrical terminals that have been designed to improve safety and reliability. The terminals feature a polycarbonate insulation material that is halogen-free and self-extinguishing. They also have a unique funnel-shaped entry for the insulation sleeve that guarantees the conductor strands are fully inserted into the terminal barrel, creating a secure electrical and mechanical connection. The operating temperature range of the terminals is -4 to 239°F.
This document provides information about Fujian Tongyue Pipe Fittings Co., Ltd., including:
1. The company address and website.
2. An overview of the copper fittings and pipes they produce, listing various sizes and types.
3. Details on advantages of their disperse pipes, such as thicker tees, uniform welding, and pressure testing.
4. Charts listing pipe sizes for different models of air conditioner and heat pump pipes.
So in summary, this document outlines the product offerings and quality advantages of a Chinese manufacturer of copper fittings and pipes.
This document provides specifications for A-M series copper tube crimping lugs for connecting copper conductors. It includes:
- Dimensions and mechanical properties of the copper tube used to manufacture the lugs to provide efficient conductivity and strength.
- Details of an annealing process used to guarantee optimum ductility and avoid cracking or breaks when the lugs are compressed or bent during installation or subjected to vibration.
- A table listing over 60 individual lug models ranging from 0.25-240 mm2 in conductor size, with corresponding dimensions, recommended crimping tools, and packaging quantities.
Cembre 2 hole copper tube crimp lugs feature extended palm with two fixing holes at 44.5mm centres. Cembre two hole cable lugs suit stranded copper conductors 25sqmm, 35sqmm, 50sqmm, 70sqmm, 95sqmm, 120sqmm, 150sqmm, 185sqmm, 240sqmm, 300sqmm, 400sqmm, 500sqmm and 630sqmm cables.
Cembre 2 Hole Copper Tube Terminal Lugs are designed for both low and high voltage cable termination up to 33kV. Manufactured from high purity copper tube, annealed and tin-plated - the extended Cembre cable lug barrel enhances electrical and mechanical performance while the absence of an inspection hole prevents moisture entry into the crimped joint or termination. Featuring an extended palm with two fixing holes at 44.5mm centres.
Cembre A-M range of copper tube cable lugs to terminate stranded copper conductors feature contained palms for circuit breakers with reduced space terminal blocks - the contained palm width lug allows an immediate and easier cable termination. The cable lug barrel is provided with an internal taper to ease the introduction of the conductor - Cembre copper cable lugs are annealed to guarantee optimum ductility and are tin-plated. Cembre ring tongue terminals with contained palms suit 10sqmm, 16sqmm, 25sqmm, 35sqmm, 50sqmm 70sqmm, 95sqmm, 120sqmm, 150sqmm, 185sqmm, 240sqmm and 300sqmm.
Cembre A4-ESI 4 hole transformer cable lugs are suitable for crimpingstranded copper conductors, 185-800sqmm. Cembre transformer cable lugs feature 4 x M8 holes on 25mm x 35mm centres.
Cembre A-4ESI transformer cable lugs are made from high purity electrolytic copper tube, annealed and tin plated. 4 hole copper tube transformer cable lugs can be produced to customer specification and drilled hole requirements.
Cembre Cable Lugs - 4 Hole Transformer Cable Lugs
Cembre cable lugs for transformer applications are rated up to 11kV for high voltage cable termination. T&D UK are stockist distributors for the complete range of Cembre crimping lugs, electrical connectors, cable crimping tools and cable cutting tools.
Case cx460 crawler excavator parts catalogue manualfjjkekfksemmm
This document contains parts lists and descriptions for an engine mounting system, air filtration system, exhaust system, radiator/water circuit, and other engine components of a CX460 CASE crawler excavator. It lists part numbers, quantities, and descriptions for each component. Reference numbers link to additional documentation for sub-components and instructions.
Cembre PVC insulated blade terminals (red 0.25-1.5sqmm, blue 1.5-2.5sqmm, yellow 4-6sqmm) - installed using Cembre HP3 ratchet crimp tool.
Cembre Specification, PVC Insulated Blade Terminals
The unique funnel shape of PVC sleeve, guarantees total insertion of the conductor strands into the crimp terminal barrel creating a secure, reliable, electrical and mechanical crimped connection. The internal surface of the crimp terminal barrel is rifled to improve contact with conductor strands when crimped and to increase tensile strength. The “F” range of Cembre crimp terminals offer a wide selection of rings, forks, pins and blades.
The document describes a range of "P" electrical terminals that have been designed to improve safety and reliability. The terminals feature a polycarbonate insulation material that is halogen-free and self-extinguishing. They also have a unique funnel-shaped entry for the insulation sleeve that guarantees the conductor strands are fully inserted into the terminal barrel, creating a secure electrical and mechanical connection. The operating temperature range of the terminals is -4 to 239°F.
The document appears to be a chart providing information on hydraulic tools, dies, and connectors for various conductor sizes. It lists applicable dies, nests, indentors, and adapters for a wide range of conductor gauges from 0.25-200 mm2 for tasks such as crimping, splicing, connecting, and tapping conductors. It also includes information for extra flexible and aluminum conductors. The chart acts as a reference for selecting the proper equipment to complete various jobs on copper, aluminum and flexible conductors of differing sizes.
This document provides specifications for heavy duty copper tube terminals for different conductor sizes ranging from 16 to 1000 sqmm. It lists the part number, dimensions, and available crimping tools for each terminal size. The terminals are made from high purity annealed copper tube with a double length barrel for enhanced performance in heavy applications. They also have an electroplated tin coating for corrosion prevention and are sealed to prevent water ingress.
The document provides specifications for copper tube crimping lugs for connecting copper conductors. It includes a table with specifications for various lugs, including the diameter and length of the stud and barrel, recommended crimping tools, and packaging quantities. The lugs are made of annealed electrolytic copper tube to provide efficient conductivity while resisting vibration and pull-out. They have an inspection hole and barrel length designed for accurate crimping. Lugs are tin-plated to prevent oxidation and suitable for power-carrying applications.
Massey ferguson mf 1100 tractor service parts catalogue manualfujsekwsxksmem
This document provides a parts list and exploded diagrams for the cylinder block of a Massey Ferguson 1100/1130 tractor with a gas engine. It includes 58 numbered parts with descriptions and part numbers. Annotations provide additional part number options and applicability based on the tractor's serial number. Diagrams show the assembly of the cylinder block and related components to aid in repairs or ordering replacements.
Mc cormick bmax tier 3 (2011 ) - rt64 - 105 tractor service repair manualufjjsjekkdemd
This document contains parts listings and component information for an engine. It lists individual part numbers, descriptions, quantities and other technical specifications for engine components. Reference numbers are provided for components that are part of larger assemblies. Notes indicate some parts are for replacement purposes and not serviced individually, and that quantities may vary depending on tractor model and year range.
Cembre C Tap crimps are suitable for establishing earthing systems and tapping off from low voltage overhead lines - C tap crimps accomodate copper cable conductors including run and tap offs, 2.5sqmm to 240sqmm. Tin plated and bright surface finish C Tap connectors are available.
Typical "C" Tap copper connectors applications - copper tap connections, joint connections and jointing two parallel running conductors.
Cembre copper "C" Tap connectors are manufactured from high purity copper profiles and are suitable for a variety of uses. Each copper connectors is marked as follows :
Cembre trade mark
Cembre reference number
Conductor size-run
Conductor size-tap
Number of crimps
Cembre die reference
Massey ferguson mf 35 tractors service parts catalogue manual (part number 8...udfjjsjkekemm
The document provides parts information for the cylinder block, cylinder head, crankshaft, cylinder head cover, air induction system, and timing gear of Massey Ferguson MF 35/35 X tractors. It includes part numbers, quantities, descriptions and comments for over 100 individual part items. Serial number ranges are provided to indicate application of specific parts.
The document is a product data sheet for aluminum or copper through connectors type MTMA-GC. The connectors are made from 99.5% pure aluminum tubing and are suitable for joining aluminum-aluminum and aluminum-copper conductors. They have high tensile strength and elongation. Various connector models are listed with their dimensions for different conductor sizes ranging from 16 to 500 square millimeters.
Massey ferguson mf 148 tractor (gb) service parts catalogue manualfksejfjskekmm
The document provides a parts list and technical specifications for a Massey Ferguson MF 148 tractor engine. It includes over 100 individual parts listed with part numbers, quantities, descriptions, and other technical details. Key components listed include the cylinder block, crankshaft, cylinder head, rocker arm assembly, and various gaskets and fasteners. Serial numbers are provided to indicate changes or variations in some part specifications over different engine models.
JCB JS70 Tracked Excavator Service Repair Manual SN:695501 Onwardsfudfjjjskjkmeme
This is the Highly Detailed factory service repair manual for theJCB JS70 TRACKED EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.JCB JS70 TRACKED EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Care and Safety
Routine Maintenance
Attachments
Body and Framework
Electrics
Hydraulics
Transmission
Brakes
Track and Running Gear
EnginE
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveJCB JS70 TRACKED EXCAVATOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Pipe fitting . in forged fitting manufatuers, supplier, dealer in mumbai ,in...DivyaDarshanMetallic
This document provides specifications for forged high pressure pipe fittings including:
1. Elbows, tees, crosses, couplings, caps, plugs, bushings, unions, and nipples in sizes from 1/8" to 4" made from carbon steel, stainless steel, or alloy steel.
2. Fittings are available with threaded, socket-weld, or butt-welding ends and pressure ratings from 2000 to 9000 pounds.
3. Dimensions, material specifications, markings, finishes and other details are provided according to standards like ASME and ASTM.
This document provides parts information for the hydraulic systems of a 1020 grain header with serial numbers between JJC0215001 and JJC0227000. It includes pictorial indexes and part listings for the reel drive, reel lift, and reel fore and aft adjustment hydraulic systems. Parts are identified by name, number, quantity and description. Diagrams show the layout and components of the different hydraulic circuits.
Conecteur is a professional manufacturer of Cable Terminals, Crimp Terminals, Terminal Lugs, Electrical Terminals, Grounding Lugs, Crimp Lugs, Copper Lugs, Cooper Lugs, Compression Lugs, DIN 46235 Cable Lugs.
This document provides product data and specifications for Cembre copper tube crimping lugs type AM. The lugs are manufactured from electrolytic copper tube to provide efficient conductivity and mechanical strength. They are annealed to guarantee ductility and withstand severe deformation during installation and vibration. The lugs come in various sizes to accommodate different conductor sizes and are marked with relevant certification information. Dimensional specifications and sections are provided for the different lug models.
This document contains a list of part numbers, revisions, pages and titles for various electrical drawings related to a DataPlace LCL system. It includes assemblies for printed circuit boards, electrical panels, sensors and other electrical and electronic components. Revisions provide information on changes made to drawings and released versions.
The document provides specifications for various mechanical connectors, including split-bolt connectors for copper-to-copper, copper-to-aluminum, and aluminum-to-aluminum connections in various conductor ranges. It also lists service post connectors, parallel groove connectors, insulated conductor connectors, two-bolt connectors, AMT connectors, power distribution blocks, anti-rotational connectors, dual-rated mechanical connectors, copper mechanical connectors, and tap connectors. Dimensions and conductor ranges are provided for each type of connector.
The document lists various PVC accessories including elbows, tees, sockets, reducers, and valves. For each item, it provides the product code, diameter, thread size, dimensions, packing quantity, and net weight. There are a total of 23 different PVC fitting items described.
This document provides a summary of service tools for various systems of JCB excavators, including:
- Body and framework tools such as hand cleaners, ovens, cartridge guns, and knives for working with glass and seals.
- Electrical test equipment such as meters, probes, and a data link adapter.
- Hydraulic tools including pressure test adapters and gauges, hand pumps, plugs, and rigs and spanners for removing piston nuts and seals.
- Slew motor service tools specific to particular excavator models for tasks like fitting seals and bearings.
This document provides a summary of service tools for various components of JCB excavators and loaders. It lists tools for working on the body and framework, electrics, hydraulics, and other sections. The tools include equipment for testing hydraulics like pressure gauges and adapters, as well as specialized tools for tasks like removing slew motor seals and pistons. Diagrams are provided for some custom tools.
This document provides a summary of service tools for various systems of JCB excavators, including:
- Body and framework tools such as hand cleaners, ovens, cartridge guns, and knives for working with glass and seals.
- Electrical test equipment such as meters, probes, and a data link adapter.
- Hydraulic tools including pressure test adapters and gauges, hand pumps, plugs, and rigs for removing piston nuts and seals from slew motors and brakes.
- Drawings of custom tools for jobs like removing seals from slew motors on specific excavator models.
The service tools are organized by vehicle system to aid technicians in maintaining and repairing
This document provides a summary of service tools for various components of JCB excavators and wheel loaders. It lists tools for working on the body and framework, electrics, hydraulics, and other systems. The tools include equipment for testing pressures and components, installing and removing seals and bearings, cutting glass, and more. Torque wrenches, gauges, pumps, seal installation tools, and other specialized equipment are described to aid in maintenance and repair.
This document provides a summary of service tools for various systems of JCB excavators, including:
- Body and framework tools such as hand cleaners, ovens, cartridge guns, and knives for working with glass and seals.
- Electrical test equipment such as meters, probes, and a data link adapter.
- Hydraulic tools including pressure test adapters and gauges, hand pumps, plugs, and rigs and spanners for removing piston nuts and seals.
- Slew motor service tools specific to particular excavator models for tasks like fitting seals and bearings.
The document appears to be a chart providing information on hydraulic tools, dies, and connectors for various conductor sizes. It lists applicable dies, nests, indentors, and adapters for a wide range of conductor gauges from 0.25-200 mm2 for tasks such as crimping, splicing, connecting, and tapping conductors. It also includes information for extra flexible and aluminum conductors. The chart acts as a reference for selecting the proper equipment to complete various jobs on copper, aluminum and flexible conductors of differing sizes.
This document provides specifications for heavy duty copper tube terminals for different conductor sizes ranging from 16 to 1000 sqmm. It lists the part number, dimensions, and available crimping tools for each terminal size. The terminals are made from high purity annealed copper tube with a double length barrel for enhanced performance in heavy applications. They also have an electroplated tin coating for corrosion prevention and are sealed to prevent water ingress.
The document provides specifications for copper tube crimping lugs for connecting copper conductors. It includes a table with specifications for various lugs, including the diameter and length of the stud and barrel, recommended crimping tools, and packaging quantities. The lugs are made of annealed electrolytic copper tube to provide efficient conductivity while resisting vibration and pull-out. They have an inspection hole and barrel length designed for accurate crimping. Lugs are tin-plated to prevent oxidation and suitable for power-carrying applications.
Massey ferguson mf 1100 tractor service parts catalogue manualfujsekwsxksmem
This document provides a parts list and exploded diagrams for the cylinder block of a Massey Ferguson 1100/1130 tractor with a gas engine. It includes 58 numbered parts with descriptions and part numbers. Annotations provide additional part number options and applicability based on the tractor's serial number. Diagrams show the assembly of the cylinder block and related components to aid in repairs or ordering replacements.
Mc cormick bmax tier 3 (2011 ) - rt64 - 105 tractor service repair manualufjjsjekkdemd
This document contains parts listings and component information for an engine. It lists individual part numbers, descriptions, quantities and other technical specifications for engine components. Reference numbers are provided for components that are part of larger assemblies. Notes indicate some parts are for replacement purposes and not serviced individually, and that quantities may vary depending on tractor model and year range.
Cembre C Tap crimps are suitable for establishing earthing systems and tapping off from low voltage overhead lines - C tap crimps accomodate copper cable conductors including run and tap offs, 2.5sqmm to 240sqmm. Tin plated and bright surface finish C Tap connectors are available.
Typical "C" Tap copper connectors applications - copper tap connections, joint connections and jointing two parallel running conductors.
Cembre copper "C" Tap connectors are manufactured from high purity copper profiles and are suitable for a variety of uses. Each copper connectors is marked as follows :
Cembre trade mark
Cembre reference number
Conductor size-run
Conductor size-tap
Number of crimps
Cembre die reference
Massey ferguson mf 35 tractors service parts catalogue manual (part number 8...udfjjsjkekemm
The document provides parts information for the cylinder block, cylinder head, crankshaft, cylinder head cover, air induction system, and timing gear of Massey Ferguson MF 35/35 X tractors. It includes part numbers, quantities, descriptions and comments for over 100 individual part items. Serial number ranges are provided to indicate application of specific parts.
The document is a product data sheet for aluminum or copper through connectors type MTMA-GC. The connectors are made from 99.5% pure aluminum tubing and are suitable for joining aluminum-aluminum and aluminum-copper conductors. They have high tensile strength and elongation. Various connector models are listed with their dimensions for different conductor sizes ranging from 16 to 500 square millimeters.
Massey ferguson mf 148 tractor (gb) service parts catalogue manualfksejfjskekmm
The document provides a parts list and technical specifications for a Massey Ferguson MF 148 tractor engine. It includes over 100 individual parts listed with part numbers, quantities, descriptions, and other technical details. Key components listed include the cylinder block, crankshaft, cylinder head, rocker arm assembly, and various gaskets and fasteners. Serial numbers are provided to indicate changes or variations in some part specifications over different engine models.
JCB JS70 Tracked Excavator Service Repair Manual SN:695501 Onwardsfudfjjjskjkmeme
This is the Highly Detailed factory service repair manual for theJCB JS70 TRACKED EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.JCB JS70 TRACKED EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Care and Safety
Routine Maintenance
Attachments
Body and Framework
Electrics
Hydraulics
Transmission
Brakes
Track and Running Gear
EnginE
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveJCB JS70 TRACKED EXCAVATOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Pipe fitting . in forged fitting manufatuers, supplier, dealer in mumbai ,in...DivyaDarshanMetallic
This document provides specifications for forged high pressure pipe fittings including:
1. Elbows, tees, crosses, couplings, caps, plugs, bushings, unions, and nipples in sizes from 1/8" to 4" made from carbon steel, stainless steel, or alloy steel.
2. Fittings are available with threaded, socket-weld, or butt-welding ends and pressure ratings from 2000 to 9000 pounds.
3. Dimensions, material specifications, markings, finishes and other details are provided according to standards like ASME and ASTM.
This document provides parts information for the hydraulic systems of a 1020 grain header with serial numbers between JJC0215001 and JJC0227000. It includes pictorial indexes and part listings for the reel drive, reel lift, and reel fore and aft adjustment hydraulic systems. Parts are identified by name, number, quantity and description. Diagrams show the layout and components of the different hydraulic circuits.
Conecteur is a professional manufacturer of Cable Terminals, Crimp Terminals, Terminal Lugs, Electrical Terminals, Grounding Lugs, Crimp Lugs, Copper Lugs, Cooper Lugs, Compression Lugs, DIN 46235 Cable Lugs.
This document provides product data and specifications for Cembre copper tube crimping lugs type AM. The lugs are manufactured from electrolytic copper tube to provide efficient conductivity and mechanical strength. They are annealed to guarantee ductility and withstand severe deformation during installation and vibration. The lugs come in various sizes to accommodate different conductor sizes and are marked with relevant certification information. Dimensional specifications and sections are provided for the different lug models.
This document contains a list of part numbers, revisions, pages and titles for various electrical drawings related to a DataPlace LCL system. It includes assemblies for printed circuit boards, electrical panels, sensors and other electrical and electronic components. Revisions provide information on changes made to drawings and released versions.
The document provides specifications for various mechanical connectors, including split-bolt connectors for copper-to-copper, copper-to-aluminum, and aluminum-to-aluminum connections in various conductor ranges. It also lists service post connectors, parallel groove connectors, insulated conductor connectors, two-bolt connectors, AMT connectors, power distribution blocks, anti-rotational connectors, dual-rated mechanical connectors, copper mechanical connectors, and tap connectors. Dimensions and conductor ranges are provided for each type of connector.
The document lists various PVC accessories including elbows, tees, sockets, reducers, and valves. For each item, it provides the product code, diameter, thread size, dimensions, packing quantity, and net weight. There are a total of 23 different PVC fitting items described.
This document provides a summary of service tools for various systems of JCB excavators, including:
- Body and framework tools such as hand cleaners, ovens, cartridge guns, and knives for working with glass and seals.
- Electrical test equipment such as meters, probes, and a data link adapter.
- Hydraulic tools including pressure test adapters and gauges, hand pumps, plugs, and rigs and spanners for removing piston nuts and seals.
- Slew motor service tools specific to particular excavator models for tasks like fitting seals and bearings.
This document provides a summary of service tools for various components of JCB excavators and loaders. It lists tools for working on the body and framework, electrics, hydraulics, and other sections. The tools include equipment for testing hydraulics like pressure gauges and adapters, as well as specialized tools for tasks like removing slew motor seals and pistons. Diagrams are provided for some custom tools.
This document provides a summary of service tools for various systems of JCB excavators, including:
- Body and framework tools such as hand cleaners, ovens, cartridge guns, and knives for working with glass and seals.
- Electrical test equipment such as meters, probes, and a data link adapter.
- Hydraulic tools including pressure test adapters and gauges, hand pumps, plugs, and rigs for removing piston nuts and seals from slew motors and brakes.
- Drawings of custom tools for jobs like removing seals from slew motors on specific excavator models.
The service tools are organized by vehicle system to aid technicians in maintaining and repairing
This document provides a summary of service tools for various components of JCB excavators and wheel loaders. It lists tools for working on the body and framework, electrics, hydraulics, and other systems. The tools include equipment for testing pressures and components, installing and removing seals and bearings, cutting glass, and more. Torque wrenches, gauges, pumps, seal installation tools, and other specialized equipment are described to aid in maintenance and repair.
This document provides a summary of service tools for various systems of JCB excavators, including:
- Body and framework tools such as hand cleaners, ovens, cartridge guns, and knives for working with glass and seals.
- Electrical test equipment such as meters, probes, and a data link adapter.
- Hydraulic tools including pressure test adapters and gauges, hand pumps, plugs, and rigs and spanners for removing piston nuts and seals.
- Slew motor service tools specific to particular excavator models for tasks like fitting seals and bearings.
This document provides a summary of service tools for various components of JCB excavators and loaders. It lists tools for working on the body and framework, electrics, hydraulics, and other systems. The tools include equipment for testing pressures and components, installing and removing seals and bearings, cutting glass, and more. Torque wrenches, gauges, pumps, extractors, and specialized installation/removal tools are described.
JCB JS145W WHEELED EXCAVATOR Service Repair Manual SN:816000 Onwardskjsemfm ukjfmd
This is the Highly Detailed factory service repair manual for theJCB JS145W WHEELED EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.JCB JS145W WHEELED EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Care and Safety
Routine Maintenance
Attachments
Body and Framework
Electrics
Controls
Hydraulics
Transmission
Brakes
Engine
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveJCB JS145W WHEELED EXCAVATOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
JCB JS160W WHEELED EXCAVATOR Service Repair Manual SN:718500 Onwardsjhennd iesofku
This is the Highly Detailed factory service repair manual for theJCB JS160W WHEELED EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.JCB JS160W WHEELED EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Care and Safety
Routine Maintenance
Attachments
Body and Framework
Electrics
Controls
Hydraulics
Transmission
Brakes
Engine
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveJCB JS160W WHEELED EXCAVATOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
JCB JS175W WHEELED EXCAVATOR Service Repair Manual SN:875000 Onwardsjkksmmdmmse
This document provides a summary of service tools for various systems of JCB excavators, including:
- Body and framework tools such as hand cleaners, ovens, cartridge guns, and knives for working with glass and seals.
- Electrical test equipment such as meters, probes, and a data link adapter.
- Hydraulic tools including pressure test adapters and gauges, hand pumps, plugs, and rigs and spanners for removing piston nuts and slew motor components.
The document lists each tool by part number, name, and diagrams as needed, organized by the relevant machine system for quick reference when servicing JCB excavators.
Canawest Technologies Inc. offers premium quality butterfly valve in various designs such as, high pressure, high temperature and high sealing performance designs. Butterfly valve mainly used for segregating or regulating flow of water. For more details, visit: http://cwtvalve.com/butterfly-valve/.
Raccordi a compressione resistenti alle alte pressioni e alle alte temperature
GIGA TECH s.r.l.
Via Maestri del Lavoro 324 21040 Cislago (VA) Italy
Ph. 39 0296489130 - Fax +39 0296489303 - e-mail: contatti@giga-tech.it
This document provides contact information for Ferrostaal Piping Supply B.V. and Ferrostaal Piping Supply GmbH, including addresses, phone numbers, fax numbers, and email addresses for locations in the Netherlands and Germany. It also lists various pipe dimensions, schedules, and material grades according to ASME standards for austenitic steel pipes.
Similar to Pipe fitting . in Instrument tube-fittings-valves manufatuers, supplier, dealer in mumbai ,india , saudi arabia (20)
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELgerogepatton
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024Sinan KOZAK
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMSIJNSA Journal
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Pipe fitting . in Instrument tube-fittings-valves manufatuers, supplier, dealer in mumbai ,india , saudi arabia
1.
2. Compression Tube Fittings
Single-ferrule and Twin-ferrule
Material: SUS304. SUS316 STAINLESS STEEL & BRASS
Thread Option: NPT, PT, BST, NPS, PS, BSP
MC MALE CONNECTOR FC FEMALE CONNECTOR U EQUAL UNION RU REDUCING UNION
BU BULKHEAD UNION BMC
BULKHEADMALE
CONNECTOR
ME MALE ELBOW FE FEMALE ELBOW
UE UNION ELBOW UT UNION TEE UCR UNION CROSS MBT MALE BRANCH TEE
MRT MALE RUN TEE FBT FEMALE BRANCH TEE FRT FEMALE RUN TEE FF FRONT FERRULE
BF BACK FERRULE N NUT P PLUG C CAP
ODSW SOCKET WELDING
PIPE CONNECTOR
ODBW BUTT WELDING PIPE
CONNECTOR ODTA REDUCER MCH AN UNIONCONNECTOR
TAM MALE TUBE ADAPTER TAF FEMALE TUBE ADAPTER HN HEX NIPPLE RHN REDUCING HEX NIPPLE
RA REDUCING ADAPTER HCG HEX COUPLING RHCG REDUCING HEX
COUPLING RB REDUCING BUSHING
MET MALE ELBOW E ELBOW SE STREET ELBOW RSE REDUCING STREET ELBOW
T TEE BT BRANCH TEE ST STREET TEE MT MALE TEE
Available Modes
info@pipefitting.in
NARESH JAIN:+91 98799 77633
3. Our Tube Fittings provide a leak-proof, torque-free seal at all tubing connections and eliminate costly, hazardous
leaks in instrumentation and process tubing. All the action in the fitting moves along the tube axially instead of with a
rotary motion. Since on torque is transmitted from the fitting to the tubing, there is on initial strain which might weaken
the tubing. Total system design must the considered to assure safe, trouble-tree performance. Material compatibility,
adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and
user.
To assure reliable performance, our Tube Fittings are composed of four precision-made components, all
manufactured to very stringent tolerances under rigid quality control procedures. The consistency and quality of
these matched components has permitted their use in many difficult and severe devices. Although the fitting consists
of four components: Nut, Back Ferrule, Front Ferrule and Body, it becomes a five-piece connection when affixed to
the tubing. The two-ferrule design and sequential action of the fitting over-come variations in tube materials, wall
thickness and hardness to assure safe, reliable, leak-free connections. And Our Tube Fittings are easily installed
with no special tools required.
HOW TO ORDER
Our tube fittings are ordered by catalog number as listed in this catalog. The catalog numbering system for our tube
fittings is designed so that you can easily identify the type.
Configuration, size, and material of the fitting as well as an applicable tubing size and thread connection. The
catalog number describes completely assembled fittings. Reference tubing O.D. size first followed by pipe size. In
the event all connections are tubing, indicate largest end first.
CATALOG
Part Numbers are descriptive
Example:
—MC
Type: Male Connector
6
Tube O.D.: 6mm
— 1
Pipe Size: 1/8”
info@pipefitting.in
NARESH JAIN:+91 98799 77633
4. ASSEMBLY INSTRTUCTIONS
The following procedures should be followed for assembly of our tube fittings.
1. Our fittings are supplied to you individually wrapped and pre-assembled allowing for clean, efficient make-up
assembly every time (Refer to Fig. 1 for individual component assembly should it be required. Caution should be
used to assure ferrules are in proper sequence and direction).
Simply insert the tubing into our tube fitting assuring that cut end of tubing rests firmly against shoulder of fitting
stop.
Note: Tubing ends should be cut relatively square and burrs removed. Where practical, the use of a tubing cutter
is recommended.
2. Tighten the nut as much as possible by hand. This is referred to as “finger tight”.
REASSEMBLY INSTRUCTIONS
1.For repeated assemblies, mark with chalk or some other marking device the nut position (X) prior to loosening
the nut as shown if Figure.
2. At reassembly, tighten the nut so that the mark will advance (Y) slightly beyond the original marked position (X).
3.If the above procedure of assembly and disassembly is correctly followed, our tube fitting will continue to provide a
leak-tight connection again and again.
Fig.1
info@pipefitting.in
NARESH JAIN:+91 98799 77633
49. SE Street Elbow
Fractional
P
MALE/ FEMALE SIZE
PT/NPT
CATALOG
NUMBER
E L S
1/8 SE-01 5 20.0 21.0
1/4 SE-02 6 24.8 25.8
3/8 SE-03 8 27.7 29.7
1/2 SE-04 10 35.5 35.5
3/4 SE-06 15 42.5 40.5
1 SE-08 21 47.2 45.2
info@pipefitting.in
NARESH JAIN:+91 98799 77633
50. RSE Reducing Street Elbow
Fractional
P
FEMALE SIZE
PT/NPT
P1
MALE SIZE
PT/NPT
CATALOG
NUMBER
E L S
1/4 1/8 RSE-02-01 5 24.8 22.8
3/8 1/4 RSE-03-02 6 27.7 28.7
1/2 1/4 RSE-04-02 6 35.5 31.5
1/2 3/8 RSE-04-03 8 35.5 32.5
3/4 3/8 RSE-06-03 8 42.5 35.5
3/4 1/2 RSE-06-04 10 42.5 38.5
info@pipefitting.in
NARESH JAIN:+91 98799 77633
51. T Tee
Fractional
P
FEMALE SIZE
PT/NPT
CATALOG
NUMBER
A E L
1/8 T-01 40.0 8 20.0
1/4 T-02 49.6 11 24.8
3/8 T-03 55.4 14 27.7
1/2 T-04 71.0 18 35.5
3/4 T-06 83.0 23 42.5
1 T-08 94.4 29 47.2
info@pipefitting.in
NARESH JAIN:+91 98799 77633
52. BT Branch Tee
Fractional
P
MALE/ FEMALE SIZE
PT/NPT
CATALOG
NUMBER
A E L S
1/8 BT-01 40.0 5 20.0 21.0
1/4 BT-02 49.6 6 24.8 25.8
3/8 BT-03 55.4 8 27.7 29.7
1/2 BT-04 71.0 10 35.5 35.5
3/4 BT-06 85.0 15 42.5 40.5
1 BT-08 94.4 21 47.2 45.2
info@pipefitting.in
NARESH JAIN:+91 98799 77633
53. ST Street Tee
Fractional
P
MALE/ FEMALE SIZE
PT/NPT
CATALOG
NUMBER
A E L S
1/8 ST-01 41.0 5 20.0 21.0
1/4 ST-02 50.6 6 24.8 25.8
3/8 ST-03 57.7 8 27.7 29.7
1/2 ST-04 71.0 10 35.5 35.5
3/4 ST-06 83.0 15 42.5 40.5
1 ST-08 92.4 21 47.2 45.2
info@pipefitting.in
NARESH JAIN:+91 98799 77633
54. MT Male Tee
Fractional
SIZE
PT/NPT
CATALOG
NUMBER
A E S
1/8 MT-01 39.6 5 19.8
1/4 MT-02 48.0 6 24.0
3/8 MT-03 53.6 8 26.8
1/2 MT-04 65.4 10 32.7
3/4 MT-06 75.0 15 37.5
1 MT-08 90.4 21 45.2
info@pipefitting.in
NARESH JAIN:+91 98799 77633
55. 2PC Ball Valve 1000PSI
Features
1. Floating ball design for positive sealing.
2. Maximum Working Pressure: 1000PSI at 20℃ to 250℃
with PTFE seat.
3. End connection: tube end.
4. Blow-out proof bottom loaded stem.
5. 100% Factory tested.
6. The temperature rating of O-ring seal:
Buna-N: -30°F to 250°F (-34°C to 121°C)
Viton (Fluorocarbon): -15°F to 400°F (-26°C to 204°C)
7. The other material is available upon request.
Dimension
SIZE ORIFICE
INLET / OUTLET MM INCH
A B C D
1/4” OD 5 0.197 74.3 41 33 8.5
3/8”OD 5 0.197 78.3 41 35 9.5
1/2” OD 10 0.394 91.0 50 41 13.5
Material List
NO. PART NAME MATERIAL
1 HANDLE BLACK PHENOLIC / ZINC ALLOY
2 LOCK NUT SS304
3 WASHER SS304
4 STEM SS316 / SS304
5 GLAND PACKING PTFE / OTHER MATERIAL
6 BALL SS316 / SS304
7 SEAT PTFE/ OTHER MATERIAL
8 BODY SEAL BUNA-N / VITON
9 END CAP SS316 / SS304
10 BODY SS316/ SS304
info@pipefitting.in
NARESH JAIN:+91 98799 77633
56. 3PC Ball Valve, Female
Features
1. 2-way on-off, 3 way switching models.
2. Floating ball design for positive sealing.
3. Maximum Working Pressure: 3000PSI (206bar) at 20℃
to 250℃ with PTFE packing. 6000PSI (413bar) with
PEEK packing.
4. Variety of end connections including tube end, male or
female NPT and ISO., DIN and JIS tapered pipe ends.
5. Blow-out proof bottom loaded stem.
6. 100% Factory tested.
Dimension
D D1 L L1 A D2 H1 H L2 L3 W T
BV-01F(N)PT 1/8 5 53.3 27 1/8 14 10 38 48 29.5 17 5
BV-02F(N)PT 1/4 5 58.5 29 1/4 14 10 38 48 29.5 17 5
BV-03F(N)PT 3/8 10 64 32 3/8 16 14.5 45.5 60 37 28 5
BV-04F(N)PT 1/2 10 64 32 1/2 16 14.5 45.5 60 37 28 5
info@pipefitting.in
NARESH JAIN:+91 98799 77633
57. 3PC Ball Valve, Tube End
Material List
NO. PART NAME MATERIAL
1 HANDLE
BLACK PHENOLIC /
ZINC ALLOY
2 GRUBSCREW SS304
3 PACKING BOLT SS316 / SS304
4 PANEL NUT SS316 / SS304
5 STEM SS316 / SS304
6 STEM SEAL BUNA-N / VITON
7 GLANDPACKING PTFE/ OTHER MATERIAL
8 BALL SS316 / SS304
9 SEAT PTFE/ OTHER MATERIAL
10 BODY SEAL BUNA-N / VITON
11 END CAP SS316 / SS304
12 BODY SS316 / SS304
Dimension
SIZE ORIFICE
A B C D E F G H I
INLET / OUTLET MM INCH
3mmOD 5 0.197 61 30.5 36 10 48 29 14 6 19
4mmOD 5 0.197 61 30.5 36 10 48 29 14 6 19
6mmOD 5 0.197 66.5 33.3 36 140 48 29 14 6 19
8mmOD 5 0.197 71 35.5 36 10 48 29 14 6 19
10mmOD 5 0.197 73 36.5 36 10 48 29 14 6 19
12mmOD 10 0.394 85 42.5 45 14.5 60 37 16 6 28
14mmOD 10 0.394 85 42.5 45 14.5 60 37 156 6 28
18mmOD 10 0.394 85 42.5 45 14.5 60 37 16 6 28
22mmOD 10 0.394 86 43 47 15 60 37 16 6 29
1/8”OD 5 0.197 62 31 36 10 48 29 14 6 19
1/4”OD 5 0.197 66.5 33.3 36 10 48 29 14 6 19
3/8”OD 5 0.197 70.5 35.3 36 10 48 29 14 6 19
1/2”OD 10 0.394 86 43 45 14.5 60 37 16 6 28
3/4”OD 10 0.394 86 43 45 14.5 60 37 16 6 28
Features
1. 2-way on-off, 3 way switching models.
2. Floating ball design for positive sealing.
3. Maximum Working Pressure: 3000PSI (206bar) at 20℃ to 250℃ with
PTFE packing. 6000PSI (413bar) with PEEK packing.
4. Variety of end connections including tube end, male or female NPT and
ISO., DIN and JIS tapered pipe ends.
5. Blow-out proof bottom loaded stem.
6. 100% Factory tested.
7. The temperature rating of O-ring seal:
Buna-N: -30°F to 250°F (-34°C to 121°C)
Viton (Fluorocarbon): -15°F to 400°F (-26°C to 204°C)
8. The other material is available upon request.
info@pipefitting.in
NARESH JAIN:+91 98799 77633
58. 3 Way Ball Valve, Female
Features
1. 2-way on-off, 3 way switching models.
2. Floating ball design for positive sealing.
3. Maximum Working Pressure: 3000PSI (206bar) at 20℃
to 250℃ with PTFE packing. 6000PSI (413bar)with
PEEK packing.
4. Variety of end connections including tube end, male or
female NPT and ISO, DIN and JIS tapered pipe ends.
5. Blow-out proof bottom loaded stem.
6. 100% Factory tested.
Dimension
SIZE ORIFICE
A B C D E F G H I
INLET/OUTLET MM INCH
1/8” F(N) 5 0.197 50 25 31 36.5 48 29 14 6 20
1/4” F(N) 5 0.197 56 28 40 36.5 48 29 14 6 20
3/8” F(N) 5 0.197 70 35 48 36.5 48 29 14 6 20
1/2” F(N) 5 0.197 76 38 51 36.5 48 29 14 6 20
info@pipefitting.in
NARESH JAIN:+91 98799 77633
59. 3 Way Ball Valve, Tube End
Features
1. 2-way on-off, 3 way switching models.
2. Floating ball design for positive sealing.
3. Maximum Working Pressure: 3000PSI (206bar) at 20℃ to 250℃ with
PTFE packing. 6000PSI (413bar) with PEEK packing.
4. Variety of end connections including tube end, male or female NPT and
ISO, DIN and JIS tapered pipe ends.
5. Blow-out proof bottom loaded stem.
6. 100% Factory tested.
7. The temperature rating of O-ring seal:
Buna-N: -30°F to 250°F (-34°C to 121°C)
Viton (Fluorocarbon): -15°F to 400°F (-26°C to 204°C)
8. The other material is available upon request.
Material List
NO. PART NAME MATERIAL
1 HANDLE
BLACK PHENOLIC /
ZINC ALLOY
2 GRUBSCREW SS304
3 PACKING BOLT SS316 / SS304
4 PANEL NUT SS316 / SS304
5 STEM SS316 / SS304
6 STEM SEAL BUNA-N / VITON
7 GLANDPACKING PTFE/ OTHER MATERIAL
8 BALL SS316 / SS304
9 SEAT PTFE/ OTHER MATERIAL
10 BODY SEAL BUNA-N / VITON
11 END CAP SS316 / SS304
12 BODY SS316 / SS304
Dimension
SIZE ORIFICE
A B C D E F G H I
INLET / OUTLET MM INCH
3mmOD 5 0.197 68.5 34.3 41.5 36.5 48 29 14 6 20
6mmOD 5 0.197 71 35.5 41.5 36.45 48 29 14 6 20
8mmOD 5 0.197 73 36.5 43 36.5 48 29 14 6 20
10mmOD 5 0.197 73 36.5 43 36.5 48 29 14 6 20
1/8”OD 5 0.197 68.5 34.3 41.5 36.5 48 29 14 6 20
1/4”OD 5 0.197 71 35.5 41.5 36.5 48 29 14 6 20
3/8”OD 5 0.197 73 36.5 43 36.5 48 29 14 6 20
info@pipefitting.in
NARESH JAIN:+91 98799 77633
60. Check Valve-Female
Features
1. Working pressure range to 3000PSI
2. Temperature rating to 250℉ (121℃) withBuna
3. Inline check valve
4. Instant shutoff in upstream condition
5. 100% Factory tested
6. Locks pressure in consumer
7. Stops reversed flow in order to protect instrumentations
8. Purge system
9. Suitable for gas or liquid
Description
1. Variety of end connections including tube end, male or female NPT
and ISO, DIN and JIS tapered pipe ends
2. 100% factory tested for both crack & reseal
Technical Data
1. Max. Working Pressure: Brass- 1500 PSI (10,300 kpa)
SUS316- 3000 PSI (20,600 kpa)
2. Temperature Ratings: Viton: -23℃ to 191℃(-10℉ to375℉)
Buna: -23℃ to 121℃(-10℉ to250℉)
3. Nominal Cracking: 1, 10, 25PSI (2, 6, 66, 170 kpa)
Option: Spring with Cracking Pressure up to 100PSI
Description
Orifice Conn./Size Dimension (mm)
mm In. Inlet/Outlet D I E L H
CV-02F(N) 5 0.197
1/4” Female
PT / NPTthread
1/4” 13 13 56 19
CV-03F(N) 5 0.197
3/8” Female
PT / NPTthread
3/8” 14.5 14.5 60 19
CV-04F(N) 11 0.433
1/2” Female
PT / NPTthread
1/2” 30.5 30.5 85 32
CV-06F(N) 11 0.433
3/4” Female
PT / NPTthread
3/4” 30.5 30.5 87 32
info@pipefitting.in
NARESH JAIN:+91 98799 77633
61. Check Valve-Male
Features
1. Working pressure range to 3000PSI
2. Temperature rating to 250℉ (121℃) withBuna
3. Inline check valve
4. Instant shutoff in upstream condition
5. 100% Factory tested
6. Locks pressure in consumer
7. Stops reversed flow in order to protect instrumentations
8. Purge system
9. Suitable for gas or liquid
Description
1. Variety of end connections including tube end, male or female NPT
and ISO, DIN and JIS tapered pipe ends
2. 100% factory tested for both crack & reseal
Technical Data
1. Max. Working Pressure: Brass- 1500 PSI (10,300 kpa)
SUS316- 3000 PSI (20,600 kpa)
2. Temperature Ratings: Viton: -23℃ to 191℃(-10℉ to375℉)
Buna: -23℃ to 121℃(-10℉ to250℉)
3. Nominal Cracking: 1, 10, 25PSI (2, 6, 66, 170 kpa)
Option: Spring with Cracking Pressure up to 100PSI
Description
Orifice Conn./Size Dimension (mm)
mm In. Inlet/Outlet D I E L H
CV-02M(N) 6.55 0.256 1/4” Female PT / NPT thread 1/4” 26.5 13 52.5 19
CV-03M(N) 7.00 0.256 3/8” Female PT / NPT thread 3/8” 28.0 14. 56.0 19
info@pipefitting.in
NARESH JAIN:+91 98799 77633
62. Check Valve-Tube End
Features
1. Working pressure range to 3000PSI
2. Temperature rating to 250℉ (121℃) withBuna
3. Inline check valve
4. Instant shutoff in upstream condition
5. 100% Factory tested
6. Locks pressure in consumer
7. Stops reversed flow in order to protect instrumentations
8. Purge system
9. Suitable for gas or liquid
Description
1. Variety of end connections including tube end, male or female NPT
and ISO, DIN and JIS tapered pipe ends
2. 100% factory tested for both crack & reseal
Technical Data
1. Max. Working Pressure: Brass- 1500 PSI (10,300 kpa)
SUS316- 3000 PSI (20,600 kpa)
2. Temperature Ratings: Viton: -23℃ to 191℃(-10℉ to375℉)
Buna: -23℃ to 121℃(-10℉ to250℉)
3. Nominal Cracking: 1, 10, 25PSI (2, 6, 66, 170 kpa)
Option: Spring with Cracking Pressure up to 100PSI
Description
Orifice Conn./Size Dimension (mm)
mm In. Inlet/Outlet D I E L H H1
CV-02OD 5 0.197 1/4”OD 6.35 30.5 15.5 66.5 19 14
CV-03OD 6.5 0.256 3/8”OD 9.525 31.0 16.5 71.0 19 17
CV-04OD 11 0.433 1/2”OD 12.7 39.0 19.5 94.5 32 22
CV-06OD 11 0.433 3/4”OD 19.05 59.0 20.0 105.5 32 30
CV-6OD 5 0.197 6mmOD 6 30.0 14.5 65.5 19 14
CV-8OD 5 0.197 8mmOD 8 30.5 14.5 67.0 19 17
CV-10OD 5 0.197 10mmOD 10 30.5 16.5 69.0 19 19
CV-12OD 10 0.394 12mmOD 12 59.0 19.0 102.0 32 22
info@pipefitting.in
NARESH JAIN:+91 98799 77633
63. Dimension
Instrument Needle Valve, Integral Bonnet, Forged Body, Angle Type
Features
1. Forged or Bar Stock body construction.
2. Metal to metal or stellited seat for high pressure.
3. Angle Pattern with panel mounting optional.
4. One piece or non-regulating Vee tip, non-rotating ball tip
optional.
5. Variety of end connections: tube end.
6. Maximum Working Pressure: 6000PSI (414bar) at 200℃, .
7. 100% factory tested.
SIZE END CONNECTION (INLET X OUTLET) A B E F G H
1/4” Wellgrow Tube End 34.5 51.5 14 5 3.5 89.5
3/8” Wellgrow Tube End 35.5 54 14 5 3.5 92
1/2” Wellgrow Tube End 39.0 56 16 5 5.0 94
6mm Wellgrow Tube End 34.5 51 14 5 3.5 89
8mm Wellgrow Tube End 35.5 52.5 14 5 3.5 90.5
10mm Wellgrow Tube End 38.5 56 14 5 3.5 94
12mm Wellgrow Tube End 39.0 56.5 16 5 5.0 94.5
info@pipefitting.in
NARESH JAIN:+91 98799 77633
64. Instrument Needle Valve, Integral Bonnet, Forged Body, Female
Features
1. Forged or Bar Stock body construction.
2. Metal to metal or stellited seat for high pressure.
3. Straight Pattern with panel mounting optional.
4. One piece or non-regulating Vee tip, non-rotating ball tip
optional.
5. Variety of end connections: Female NPT and ISO., DIN and
JIS tapered pipe ends.
6. Maximum Working Pressure: 6000PSI (414bar) at 200℃, .
7. 100% factory tested.
Dimension
SIZE END CONNECTION (INLET X OUTLET) A B C D E F G
1/4” FNPT 27.5 55 77 17 14 5 3.5
3/8” FNPT 32.0 64 79 19 16 5 5.0
1/2” FNPT 31.5 63 81 21 16 5 5.0
3/4” FNPT 33.5 67 84 24 16 5 10.0
1” FNPT 35.5 71 87 27 16 5 10.0
info@pipefitting.in
NARESH JAIN:+91 98799 77633
65. Instrument Needle Valve, Integral Bonnet, Forged Body, Tube OD
Features
1. Forged or Bar Stock body construction.
2. Metal to metal or stellited seat for high pressure.
3. Straight Pattern with panel mounting optional.
4. One piece or non-regulating Vee tip, non-rotating ball tip optional.
5. Variety of end connections: female NPT and ISO, DIN and JIS tapered pipe
ends.
6. Maximum Working Pressure: 6000PSI (414bar) at 200°C
7. 100% factory tested.
Dimension
SIZE
END
CONNECTION
(INLET X OUTLET)
A B C D E F G H I
1/4” MNPT 27.5 55 50 12 3.5 14 60 32 5
3/8” MNPT 32 64 50 12 3.5 14 60 32 5
1/2” MNPT 36.5 73 54 16 5 16 60 32 5
1/4” FNPT 27.5 55 50 12 3.5 14 60 32 5
3/8” FNPT 32 64 50 12 5 16 60 32 5
1/4” MNPT X FNPT 27.5 55 50 12 3.5 14 60 32 5
3/8” MNPT X FNPT 32 64 50 12 3.5 14 60 32 5
1/2” MNPT X FNPT 36.5 73 54 16 5 16 60 32 5
1/4” Wellgrow Tube End 34.5 69 50 12 3.5 14 60 32 5
3/8” Wellgrow Tube End 34.5 69 50 12 3.5 14 60 32 5
1/2” Wellgrow Tube End 45.5 91 54 16 5 16 60 32 5
3/4” Wellgrow Tube End 45.5 91 56 18 5 16 60 32 5
1” Wellgrow Tube End 50 100 60.5 22.5 10 16 60 32 5
6MM Wellgrow Tube End 34.3 68.5 50 12 3.5 14 60 32 5
8MM Wellgrow Tube End 35 70 50 12 3.5 14 60 32 5
10MM Wellgrow Tube End 38 76 50 12 3.5 14 60 32 5
12MM Wellgrow Tube End 45.5 91 54 16 5 16 60 32 5
16MM Wellgrow Tube End 45.5 91 56 18 5 16 60 32 5
22MM Wellgrow Tube End 50 100 58.5 20.5 10 16 60 32 5
25MM Wellgrow Tube End 50 100 63 25 10 16 60 32 5
Material List
NO. PART NAME MATERIAL
1 BODY SS316 / SS304
2 BONNET SS316 / SS304
3 WASHER SS316 / SS304
4 PACKING PTFE / GRAFOIL
5 PACKING WASHER SS316 / SS304
6 STEM SS316 / SS304
7 LOCK NUT SS316 / SS304
8 GRUB SCREW SS304
9 HANDLE SS304
10 VEE TIP STEM SS316 / SS304
info@pipefitting.in
NARESH JAIN:+91 98799 77633
66. Address:71, Bhandari Street 1st, Kumbharwada Mumbai – 400004
Tel: + 91 22 6659 5122 || +91 22 6743 6535
MOB: +91 9879977633
Email Id :info@pipefitting.in || ddmetallica@yahoo.com.
Website: www.pipefitting.in || www.divyadarshanmetallica.com
Stockiest, Suppliers, Exporters, and Importers Of:
Stainless Steel, Mild Steel & all Industrial Raw Materials