This document defines registers and bit fields for the PIC18F452 microcontroller. It includes definitions for ports A-E, latches A-E, data direction registers A-D, and other special function registers like timers, analog-to-digital converter, and serial peripheral interface.
1. The document describes the scheme logic for a power generation control system. It includes input/output points, their purposes, and the logic functions that supervise them.
2. The logic is broken down into six sections - customer inputs/outputs, scheme logic, trip #3 logic, trip #1 logic, trip #2 logic, and seal-in logic. Trip and protection functions are described for different input conditions.
3. Key components include inputs for generator status, protective relays, and control functions. Outputs control circuit breakers, alarms, initiations, and seal-in protective trip outputs for a set time period.
1. A 32-bit single-cycle MIPS processor was implemented by coding each component in VHDL and connecting them together. The code was synthesized and a report showed a total memory usage of 270752 kilobytes.
2. To implement a 32-bit multi-cycle MIPS processor, changes were made to the single-cycle code including defining four registers between stages and connecting the input and output ports of corresponding components. Signals were defined to allow data transfer between register stages. The register files were then connected using port maps.
This document contains C code for an ARM7-based flood alert system using an LCD display. It includes function definitions for initializing the LCD, writing data and instructions, setting the cursor position, printing strings, and generating delays. The main program loop continuously clears the display, prints status messages, and checks sensor input to play warning messages and indicate flood conditions or normal status on the LCD.
1. The document describes the core analysis steps for ChIP-seq and RNA-seq experiments, including trimming, alignment, peak calling, and downstream analyses like viewing data in a genome browser and identifying motifs.
2. It explains key ChIP-seq steps like sonication, immunoprecipitation of DNA-bound proteins, and use of control samples to identify true enrichment peaks.
3. It also outlines RNA-seq workflow involving poly-A selection, cDNA synthesis, and analysis of gene and transcript expression.
This document contains the configuration of a CPU 1214C DC/DC/Rly programmable logic controller. It includes the configuration of digital and analog inputs and outputs, communication modules, and blocks for counting, timing and communication. The document contains the module configuration, I/O addressing, and block programming to implement control logic for the PLC.
An access control list (ACL) is a sequential list of permit or deny statements that apply to network traffic and are used to control what traffic is allowed or denied on a network interface. ACLs can filter traffic based on source/destination IP addresses, protocols, and port numbers. Standard ACLs filter only on source IP addresses while extended ACLs can filter on additional parameters. ACLs are applied to interfaces using the ip access-group command to implement the access control on inbound or outbound traffic on that interface.
This document provides product information for the 74HC393 and 74HCT393 dual 4-bit binary ripple counters. It includes descriptions of the general features, pin configurations, functional diagrams, electrical specifications and ordering information for the devices. The counters each have a clock input, reset input, and 4 output pins that transition through the counting states from 0 to 15 with each clock pulse.
1. The document describes the scheme logic for a power generation control system. It includes input/output points, their purposes, and the logic functions that supervise them.
2. The logic is broken down into six sections - customer inputs/outputs, scheme logic, trip #3 logic, trip #1 logic, trip #2 logic, and seal-in logic. Trip and protection functions are described for different input conditions.
3. Key components include inputs for generator status, protective relays, and control functions. Outputs control circuit breakers, alarms, initiations, and seal-in protective trip outputs for a set time period.
1. A 32-bit single-cycle MIPS processor was implemented by coding each component in VHDL and connecting them together. The code was synthesized and a report showed a total memory usage of 270752 kilobytes.
2. To implement a 32-bit multi-cycle MIPS processor, changes were made to the single-cycle code including defining four registers between stages and connecting the input and output ports of corresponding components. Signals were defined to allow data transfer between register stages. The register files were then connected using port maps.
This document contains C code for an ARM7-based flood alert system using an LCD display. It includes function definitions for initializing the LCD, writing data and instructions, setting the cursor position, printing strings, and generating delays. The main program loop continuously clears the display, prints status messages, and checks sensor input to play warning messages and indicate flood conditions or normal status on the LCD.
1. The document describes the core analysis steps for ChIP-seq and RNA-seq experiments, including trimming, alignment, peak calling, and downstream analyses like viewing data in a genome browser and identifying motifs.
2. It explains key ChIP-seq steps like sonication, immunoprecipitation of DNA-bound proteins, and use of control samples to identify true enrichment peaks.
3. It also outlines RNA-seq workflow involving poly-A selection, cDNA synthesis, and analysis of gene and transcript expression.
This document contains the configuration of a CPU 1214C DC/DC/Rly programmable logic controller. It includes the configuration of digital and analog inputs and outputs, communication modules, and blocks for counting, timing and communication. The document contains the module configuration, I/O addressing, and block programming to implement control logic for the PLC.
An access control list (ACL) is a sequential list of permit or deny statements that apply to network traffic and are used to control what traffic is allowed or denied on a network interface. ACLs can filter traffic based on source/destination IP addresses, protocols, and port numbers. Standard ACLs filter only on source IP addresses while extended ACLs can filter on additional parameters. ACLs are applied to interfaces using the ip access-group command to implement the access control on inbound or outbound traffic on that interface.
This document provides product information for the 74HC393 and 74HCT393 dual 4-bit binary ripple counters. It includes descriptions of the general features, pin configurations, functional diagrams, electrical specifications and ordering information for the devices. The counters each have a clock input, reset input, and 4 output pins that transition through the counting states from 0 to 15 with each clock pulse.
El software se define como el conjunto de programas, procedimientos, reglas, documentación y datos que forman parte de un sistema de computación. El software se clasifica en tres tipos: software de sistema, que proporciona interfaces y herramientas de apoyo para el mantenimiento del sistema; software de programación, que brinda herramientas para el desarrollo de programas; y software de aplicación, que permite a los usuarios llevar a cabo tareas específicas en campos automatizables.
Brasil tiene una población de 193 millones de habitantes y una extensión de 28,857 km. Su moneda es el Real brasileño y algunos de sus platos tradicionales y lugares turísticos incluyen.
Este documento presenta los objetivos y 10 ejercicios de lógica matemática realizados por un estudiante de arquitectura. Los objetivos son realizar 10 ejercicios sobre el mismo tema y lograr interpretar bien las frases en las gráficas. Cada ejercicio consiste en tres frases que establecen una relación lógica entre un sujeto y un predicado.
El documento describe cómo el tango ha inspirado obras de arte como el cine a lo largo de los años. Menciona que películas populares y exitosas como Doce monos, La lista de Schindler y Perfume de mujer incluyen escenas de baile de tango. También destaca películas completamente dedicadas al tango como La lección de tango y Tango. Explica que desde sus inicios el tango despertó curiosidad e interés en países de todo el mundo y cómo el cine supo reflejar estos sentimientos al incluir escenas de tango en
Habilidades de pensamiento y creatividad en la enseñanza del españolYadi Gonzalez
El documento presenta varias estrategias creativas para promover el pensamiento crítico y la expresión en la enseñanza del español, incluyendo técnicas como lluvia de ideas, cambiar finales de cuentos, trabajar en equipo, y abordar problemas reales para encontrar soluciones creativas. También recomienda actividades como escribir historias por turnos, llevar diarios artísticos donde los estudiantes dibujan y escriben sobre sus dibujos, e imaginar qué sucede después de historias leídas en cl
El documento describe varios desafíos que enfrenta el sistema educativo peruano como la pobreza, zonas alejadas, salud en riesgo y desvalorización de la educación. También menciona que un alto porcentaje de niños y adolescentes están fuera de la escuela o reciben maltrato. Se hicieron cambios en 1996 para mejorar la calidad educativa pero no han sido suficientes. Se necesitan innovaciones que consideren el contexto y promuevan el desarrollo de nuevas estrategias para apoyar a esta población.
La tecnología multimedia integra varios medios como sonido, texto, voz, video y gráficas a través de la computadora para humanizar las máquinas. Combina estos elementos mediante aplicaciones concretas que requieren dicha integración. El multimedia se define como cualquier combinación de texto, arte, sonido, animación y video que llega a través de la computadora u otros medios electrónicos.
This short document promotes creating presentations using Haiku Deck, a tool for making slideshows. It encourages the reader to get started making their own Haiku Deck presentation and sharing it on SlideShare. In just one sentence, it pitches the idea of using Haiku Deck to easily create engaging slideshows.
El ciclo del agua describe los estados del agua como sólido, líquido y gaseoso, y explica cómo el sol evapora el agua de la superficie hacia la atmósfera donde se enfría y condensa para formar nubes, las cuales eventualmente se precipitan como lluvia, nieve o granizo y regresan a la superficie para que el ciclo continúe.
Poblamiento en el área Várdula en época romana altoimperial y los cambios de ocupación y organización territorial. Trabajo de máster, asignatura Fuentes para la Investigación.
Máster en Métodos y Técnicas avanzadas de Investigación Histórica, Artística y Geográfica. de la UNED
Este documento describe un taller para fortalecer las competencias de los servidores públicos en el manejo de su imagen personal e institucional. El taller cubrirá técnicas de etiqueta, normas de urbanidad, presentación personal, representación institucional y comunicación efectiva. Se llevará a cabo con sesiones presenciales, virtuales y trabajo individual durante 24 horas para enseñar a los participantes a proyectar la mejor imagen posible.
El documento describe las características del amor en la adolescencia, incluyendo que es intenso, emocional, impulsivo e idealista. Explica que los adolescentes creen que sus relaciones no funcionarán debido a la inmadurez y el miedo a la soledad. Finalmente, señala que el verdadero amor es desinteresado, sin miedo y se enfoca en dar alegría al otro.
La pandemia de COVID-19 ha tenido un impacto significativo en la economía mundial. Muchos países experimentaron fuertes caídas en el PIB y aumentos en el desempleo debido a los cierres generalizados y las restricciones a los viajes. Aunque las vacunas han permitido la reapertura de muchas economías, los efectos a largo plazo de la pandemia en sectores como el turismo y los viajes aún no están claros.
El documento describe varios objetos arqueológicos encontrados en el poblado argárico de La Terrera del Reloj en España que datan entre 1800 a.C. y 1500 a.C., incluyendo cuencos, ollas, hachas de bronce, minerales de cobre y mazos de minero. La mayoría de los objetos fueron encontrados en excavaciones arqueológicas realizadas por Francisco Contreras Cortés.
Este documento describe varios métodos de conservación de alimentos y su influencia en la calidad nutricional. Explica métodos como refrigeración, congelación, esterilización, pasteurización, secado, salazón y envasado al vacío. Señala que estos métodos pueden mejorar o reducir nutrientes como vitaminas, proteínas, carbohidratos y grasas. Concluye que los métodos de conservación juegan un papel importante en la sociedad moderna al permitir el almacenamiento y consumo de alimentos procesados de manera segura
Tarea No 1 Jeannette Urrutia Uniandes CTTEmiliajose
Este documento presenta un plan de estudios para un curso de Contabilidad de Costos. El curso se llevará a cabo en el semestre III, tendrá una carga de 5 créditos y 80 horas totales. Cubrirá temas como la naturaleza de la contabilidad de costos, su organización y proceso para obtener resultados siguiendo normas contables internacionales. El objetivo general del curso es interpretar la información de costos para el planteamiento, control y toma de decisiones en empresas industriales.
C:\documents and settings\usuario\mis documentos\hh\cuarto semestre\informati...ingcristian
La tecnología contribuye al medio ambiente al permitir el desarrollo de inventos que contaminan menos en el transporte, mejorar la efectividad de las energías renovables como las placas solares, y optimizar los cultivos y la conservación de especies animales en peligro mediante el uso de ordenadores y radiotransmisores.
Este documento contiene una lista de términos relacionados con el uso del programa Microsoft Word. Incluye instrucciones sobre cómo abrir y guardar archivos, navegar por la interfaz, formato de texto, inserción de tablas, imágenes y gráficos, y el uso de herramientas como estilos, alineación, sangría, viñetas y numeración.
El software se define como el conjunto de programas, procedimientos, reglas, documentación y datos que forman parte de un sistema de computación. El software se clasifica en tres tipos: software de sistema, que proporciona interfaces y herramientas de apoyo para el mantenimiento del sistema; software de programación, que brinda herramientas para el desarrollo de programas; y software de aplicación, que permite a los usuarios llevar a cabo tareas específicas en campos automatizables.
Brasil tiene una población de 193 millones de habitantes y una extensión de 28,857 km. Su moneda es el Real brasileño y algunos de sus platos tradicionales y lugares turísticos incluyen.
Este documento presenta los objetivos y 10 ejercicios de lógica matemática realizados por un estudiante de arquitectura. Los objetivos son realizar 10 ejercicios sobre el mismo tema y lograr interpretar bien las frases en las gráficas. Cada ejercicio consiste en tres frases que establecen una relación lógica entre un sujeto y un predicado.
El documento describe cómo el tango ha inspirado obras de arte como el cine a lo largo de los años. Menciona que películas populares y exitosas como Doce monos, La lista de Schindler y Perfume de mujer incluyen escenas de baile de tango. También destaca películas completamente dedicadas al tango como La lección de tango y Tango. Explica que desde sus inicios el tango despertó curiosidad e interés en países de todo el mundo y cómo el cine supo reflejar estos sentimientos al incluir escenas de tango en
Habilidades de pensamiento y creatividad en la enseñanza del españolYadi Gonzalez
El documento presenta varias estrategias creativas para promover el pensamiento crítico y la expresión en la enseñanza del español, incluyendo técnicas como lluvia de ideas, cambiar finales de cuentos, trabajar en equipo, y abordar problemas reales para encontrar soluciones creativas. También recomienda actividades como escribir historias por turnos, llevar diarios artísticos donde los estudiantes dibujan y escriben sobre sus dibujos, e imaginar qué sucede después de historias leídas en cl
El documento describe varios desafíos que enfrenta el sistema educativo peruano como la pobreza, zonas alejadas, salud en riesgo y desvalorización de la educación. También menciona que un alto porcentaje de niños y adolescentes están fuera de la escuela o reciben maltrato. Se hicieron cambios en 1996 para mejorar la calidad educativa pero no han sido suficientes. Se necesitan innovaciones que consideren el contexto y promuevan el desarrollo de nuevas estrategias para apoyar a esta población.
La tecnología multimedia integra varios medios como sonido, texto, voz, video y gráficas a través de la computadora para humanizar las máquinas. Combina estos elementos mediante aplicaciones concretas que requieren dicha integración. El multimedia se define como cualquier combinación de texto, arte, sonido, animación y video que llega a través de la computadora u otros medios electrónicos.
This short document promotes creating presentations using Haiku Deck, a tool for making slideshows. It encourages the reader to get started making their own Haiku Deck presentation and sharing it on SlideShare. In just one sentence, it pitches the idea of using Haiku Deck to easily create engaging slideshows.
El ciclo del agua describe los estados del agua como sólido, líquido y gaseoso, y explica cómo el sol evapora el agua de la superficie hacia la atmósfera donde se enfría y condensa para formar nubes, las cuales eventualmente se precipitan como lluvia, nieve o granizo y regresan a la superficie para que el ciclo continúe.
Poblamiento en el área Várdula en época romana altoimperial y los cambios de ocupación y organización territorial. Trabajo de máster, asignatura Fuentes para la Investigación.
Máster en Métodos y Técnicas avanzadas de Investigación Histórica, Artística y Geográfica. de la UNED
Este documento describe un taller para fortalecer las competencias de los servidores públicos en el manejo de su imagen personal e institucional. El taller cubrirá técnicas de etiqueta, normas de urbanidad, presentación personal, representación institucional y comunicación efectiva. Se llevará a cabo con sesiones presenciales, virtuales y trabajo individual durante 24 horas para enseñar a los participantes a proyectar la mejor imagen posible.
El documento describe las características del amor en la adolescencia, incluyendo que es intenso, emocional, impulsivo e idealista. Explica que los adolescentes creen que sus relaciones no funcionarán debido a la inmadurez y el miedo a la soledad. Finalmente, señala que el verdadero amor es desinteresado, sin miedo y se enfoca en dar alegría al otro.
La pandemia de COVID-19 ha tenido un impacto significativo en la economía mundial. Muchos países experimentaron fuertes caídas en el PIB y aumentos en el desempleo debido a los cierres generalizados y las restricciones a los viajes. Aunque las vacunas han permitido la reapertura de muchas economías, los efectos a largo plazo de la pandemia en sectores como el turismo y los viajes aún no están claros.
El documento describe varios objetos arqueológicos encontrados en el poblado argárico de La Terrera del Reloj en España que datan entre 1800 a.C. y 1500 a.C., incluyendo cuencos, ollas, hachas de bronce, minerales de cobre y mazos de minero. La mayoría de los objetos fueron encontrados en excavaciones arqueológicas realizadas por Francisco Contreras Cortés.
Este documento describe varios métodos de conservación de alimentos y su influencia en la calidad nutricional. Explica métodos como refrigeración, congelación, esterilización, pasteurización, secado, salazón y envasado al vacío. Señala que estos métodos pueden mejorar o reducir nutrientes como vitaminas, proteínas, carbohidratos y grasas. Concluye que los métodos de conservación juegan un papel importante en la sociedad moderna al permitir el almacenamiento y consumo de alimentos procesados de manera segura
Tarea No 1 Jeannette Urrutia Uniandes CTTEmiliajose
Este documento presenta un plan de estudios para un curso de Contabilidad de Costos. El curso se llevará a cabo en el semestre III, tendrá una carga de 5 créditos y 80 horas totales. Cubrirá temas como la naturaleza de la contabilidad de costos, su organización y proceso para obtener resultados siguiendo normas contables internacionales. El objetivo general del curso es interpretar la información de costos para el planteamiento, control y toma de decisiones en empresas industriales.
C:\documents and settings\usuario\mis documentos\hh\cuarto semestre\informati...ingcristian
La tecnología contribuye al medio ambiente al permitir el desarrollo de inventos que contaminan menos en el transporte, mejorar la efectividad de las energías renovables como las placas solares, y optimizar los cultivos y la conservación de especies animales en peligro mediante el uso de ordenadores y radiotransmisores.
Este documento contiene una lista de términos relacionados con el uso del programa Microsoft Word. Incluye instrucciones sobre cómo abrir y guardar archivos, navegar por la interfaz, formato de texto, inserción de tablas, imágenes y gráficos, y el uso de herramientas como estilos, alineación, sangría, viñetas y numeración.
O documento define os pinos de entrada e saída para controlar um display LCD e um pino PWM. Ele especifica os pinos de dados, enable e rs do LCD e define um pino para PWM no microcontrolador PIC.
This document defines registers and bit fields for the PIC18F452 microcontroller. It includes definitions for ports A-E, latches A-E, data direction registers A-D, and other special function registers like timers, analog-to-digital converter, and serial peripheral interface.
O documento define os pinos de entrada e saída para controlar um LCD e PWM. Ele especifica os pinos de dados, enable e rs do LCD e define um pino PWM para saída de sinal.
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMSIJNSA Journal
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
ACEP Magazine edition 4th launched on 05.06.2024Rahul
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
13. unsigned N:1;
} STATUSbits;
extern near unsigned FSR2;
extern near unsigned char FSR2L;
extern near unsigned char FSR2H;
extern volatile near unsigned char PLUSW2;
extern volatile near unsigned char PREINC2;
extern volatile near unsigned char POSTDEC2;
extern volatile near unsigned char POSTINC2;
extern near unsigned char INDF2;
extern near unsigned char BSR;
extern near unsigned FSR1;
extern near unsigned char FSR1L;
extern near unsigned char FSR1H;
extern volatile near unsigned char PLUSW1;
extern volatile near unsigned char PREINC1;
extern volatile near unsigned char POSTDEC1;
extern volatile near unsigned char POSTINC1;
extern near unsigned char INDF1;
extern near unsigned char W;
extern near unsigned char WREG;
extern near unsigned FSR0;
extern near unsigned char FSR0L;
extern near unsigned char FSR0H;
extern volatile near unsigned char PLUSW0;
extern volatile near unsigned char PREINC0;
extern volatile near unsigned char POSTDEC0;
extern volatile near unsigned char POSTINC0;
extern near unsigned char INDF0;
extern volatile near unsigned char INTCON3;
extern volatile near union {
struct {
unsigned INT1F:1;
unsigned INT2F:1;
unsigned :1;
unsigned INT1E:1;
unsigned INT2E:1;
unsigned :1;
unsigned INT1P:1;
unsigned INT2P:1;
};
struct {
unsigned INT1IF:1;
unsigned INT2IF:1;
unsigned :1;
unsigned INT1IE:1;
unsigned INT2IE:1;
unsigned :1;
unsigned INT1IP:1;
unsigned INT2IP:1;
};
} INTCON3bits;
14. extern volatile near unsigned char INTCON2;
extern volatile near union {
struct {
unsigned RBIP:1;
unsigned INT3P:1;
unsigned T0IP:1;
unsigned INTEDG3:1;
unsigned INTEDG2:1;
unsigned INTEDG1:1;
unsigned INTEDG0:1;
unsigned RBPU:1;
};
struct {
unsigned :2;
unsigned TMR0IP:1;
};
} INTCON2bits;
extern volatile near unsigned char INTCON;
extern volatile near union {
struct {
unsigned RBIF:1;
unsigned INT0F:1;
unsigned T0IF:1;
unsigned RBIE:1;
unsigned INT0E:1;
unsigned T0IE:1;
unsigned PEIE:1;
unsigned GIE:1;
};
struct {
unsigned :1;
unsigned INT0IF:1;
unsigned TMR0IF:1;
unsigned :1;
unsigned INT0IE:1;
unsigned TMR0IE:1;
unsigned GIEL:1;
unsigned GIEH:1;
};
} INTCONbits;
extern near unsigned PROD;
extern near unsigned char PRODL;
extern near unsigned char PRODH;
extern volatile near unsigned char TABLAT;
extern volatile near unsigned short long TBLPTR;
extern volatile near unsigned char TBLPTRL;
extern volatile near unsigned char TBLPTRH;
extern volatile near unsigned char TBLPTRU;
extern volatile near unsigned short long PC;
extern volatile near unsigned char PCL;
extern volatile near unsigned char PCLATH;
extern volatile near unsigned char PCLATU;
15. extern volatile near unsigned char STKPTR;
extern volatile near struct {
unsigned STKPTR0:1;
unsigned STKPTR1:1;
unsigned STKPTR2:1;
unsigned STKPTR3:1;
unsigned STKPTR4:1;
unsigned :1;
unsigned STKUNF:1;
unsigned STKFUL:1;
} STKPTRbits;
extern near unsigned short long TOS;
extern near unsigned char TOSL;
extern near unsigned char TOSH;
extern near unsigned char TOSU;
/*-------------------------------------------------------------------------
* Some useful defines for inline assembly stuff
*-------------------------------------------------------------------------*/
#define ACCESS 0
#define BANKED 1
/*-------------------------------------------------------------------------
* Some useful macros for inline assembly stuff
*-------------------------------------------------------------------------*/
#define Nop() {_asm nop _endasm}
#define ClrWdt() {_asm clrwdt _endasm}
#define Sleep() {_asm sleep _endasm}
#define Reset() {_asm reset _endasm}
#define Rlcf(f,dest,access) {_asm movlb f rlcf f,dest,access _endasm}
#define Rlncf(f,dest,access) {_asm movlb f rlncf f,dest,access _endasm}
#define Rrcf(f,dest,access) {_asm movlb f rrcf f,dest,access _endasm}
#define Rrncf(f,dest,access) {_asm movlb f rrncf f,dest,access _endasm}
#define Swapf(f,dest,access) {_asm movlb f swapf f,dest,access _endasm }
/*-------------------------------------------------------------------------
* A fairly inclusive set of registers to save for interrupts.
* These are locations which are commonly used by the compiler.
*-------------------------------------------------------------------------*/
#define INTSAVELOCS TBLPTR, TABLAT, PROD
/*-------------------------------------------------------------------------
* IMPORTANT: The _CONFIG_DECL macro has been deprecated. Please utilize
* the #pragma config directive. Refer to the "MPLAB C18 C
* Compiler User's Guide" for more information relating to the
* #pragma config directive.
*
* Defines for configuration words:
* _CONFIG_DECL should be placed between a #pragma romdata CONFIG
* and a #pragma romdata. For example: ,