PI1- (Sec- 11-8) The vapor pressure of the organie liquid toluene at 2.docx
•Download as DOCX, PDF•
0 likes•4 views
PI1. (Sec. 11.8) The vapor pressure of the organie liquid toluene at 20.0 °C is 22 is the new temperature, in °C, if the vapor pressure is increased 42 mmHg? (All\",-40.6 kJ/mol) & (R-8314 J / mol . K) mm H g What a) 24.2 °C b) 25.6 °C c) 28.1 °C d) 31.8 °C e) 39.5 °C P12. (Sec. 11.8) The vapor pressure of the organic solid naphthalene at 25 °C is 0.087 mm Hg. What is the new temperature, in °C, if the vapor pressure is carefully increased to 0.287 mmHg? AHvap 56.1 kJ/mol) & (R- 8.314J/mol K) a) 11.9°C b) 41.5 °C c) 23.4°C d) 35.4 °C e) 50.2 °c P13. (Sec. 11.8) The heat of vaporization (AHap)for water is 40.6 kJ/mol. How much energy, in kJ, is needed to convert 55.5 grams of liquid water to steam at 100 °C? a) 67.1 kJ b) 98.1 kJ c) 202 kJ d) 76.9 kJ e) 125 kJ P14. (Sec. 11.9) On the phase diagram shown below, segmentcorresponds to the conditions of temperature and pressure under which the solid and the gas of the substance are in equilibriumm Solution 11) T1 = 20.0 oC =(20.0 + 273)K = 293.0 K P1 = 22 mmHg P2 = 42 mmHg ?H = 40.6 KJ/mol = 40600.0 J/mol use: ln(P2/P1) = (?H/R)*(1/T1 - 1/T2) ln(42.0/22) = (40600.0/8.314)*(1/293.0 - 1/T2) 0.6466 = 4883.3293*(1/293.0 - 1/T2) T2 = 305 K = (305-273) oC = 32 oC Answer: d 12) T1 = 25.0 oC =(25.0 + 273)K = 298.0 K P1 = 8.7*10^-2 mmHg P2 = 0.287 mmHg ?H = 56.1 KJ/mol = 56100.0 J/mol use: ln(P2/P1) = (?H/R)*(1/T1 - 1/T2) ln(0.287/8.7*10^-2) = (56100.0/8.314)*(1/298.0 - 1/T2) 1.1936 = 6747.6546*(1/298.0 - 1/T2) T2 = 315 K = (315-273) oC = 42 oC Answer: b Only 1 question at a time please .
Report
Share
Report
Share
Recommended
[W f stoecker]_refrigeration_and_a_ir_conditioning_(book_zz.org)
- The document describes thermal principles and psychrometric concepts.
- It provides solutions to example problems involving state changes of water, heat transfer calculations, psychrometric chart readings, and enthalpy/humidity ratio determinations.
- Key concepts covered include the use of steam tables, Bernoulli's equation, psychrometric equations, and heat transfer relationships for convection and radiation.
A109210305 thermodynamics1
This document contains 8 thermodynamics practice problems and their solutions. It provides details on processes like polytropic expansion, steam turbine cycles, gas mixtures, calorimetry, refrigeration cycles, internal energy, and more. The problems cover concepts in closed, open and isolated systems, the first and second laws of thermodynamics, and applying thermodynamic equations to calculate work, heat and efficiency.
Thermodynamics numericl 2016
The document provides 13 numerical problems related to chemical thermodynamics and energetics. The problems cover topics like work done during gas expansion/compression, standard enthalpy of reaction calculations using bond energies and standard state data, spontaneity of reactions using standard Gibbs free energy and entropy values, heat and enthalpy changes during phase transitions, and calculations involving standard enthalpies of formation.
SI #3 Key
1. The document discusses key concepts from general chemistry including:
- The van der Waals equation accounting for non-zero particle volumes and interparticle interactions.
- Using the ideal gas law to calculate changes in volume with temperature changes.
- The value of the gas constant R at standard temperature and pressure.
- Conversions between various pressure and volume units.
- Calculating moles, pressure, volume, and number of molecules using the ideal gas law.
Introduction to chemical engineering thermodynamics, 6th ed [solution]
This document contains solutions to math problems involving concepts of thermodynamics, including calculations of work, heat, internal energy, enthalpy, and phase changes. Problem 1 calculates the work done in lifting a mass and the resulting internal energy change. Problem 2 determines the heat transferred and final temperature when water gains a small amount of heat. Problem 3 is a series of thermodynamic steps where the initial and final internal energies must sum to zero.
CHM 2045 EXAM 5
This document contains 20 multiple choice questions about topics in chemistry including gas laws, stoichiometry, colligative properties of solutions, and thermochemistry. The questions assess understanding of concepts such as how pressure, volume, temperature, and amount of substance relate for gases based on the ideal gas law; determining amounts of reactants and products from balanced chemical equations; calculating properties of solutions like molality, mole fraction, vapor pressure lowering, boiling point elevation, and freezing point depression; and determining molar masses from experimental data.
First law of thermodynamics
The document summarizes key concepts from thermodynamics including:
- The Zeroth Law of Thermodynamics states that if two systems are each in thermal equilibrium with a third system, they are in thermal equilibrium with each other.
- The First Law of Thermodynamics states that energy cannot be created or destroyed, only changed in form. For a closed system, the net energy transferred as heat and work equals the net change in internal energy.
- Derivations from the First Law relate internal energy change, enthalpy change, and specific heat capacities for constant volume and constant pressure processes. Relationships between specific heat capacities are also derived for ideal gases.
- Several examples show applying the
SI #2 Key
This document provides 13 multiple choice and calculation questions about key concepts in general chemistry including the ideal gas law, density, molar mass, reaction stoichiometry involving gases, and gas behavior. It tests understanding of gas laws, calculations using the ideal gas equation, and properties that affect how real gases deviate from ideal behavior. The final question indicates that an ideal gas is distinguished from real gases by the fact that ideal gas molecules have no attraction for one another.
Recommended
[W f stoecker]_refrigeration_and_a_ir_conditioning_(book_zz.org)
- The document describes thermal principles and psychrometric concepts.
- It provides solutions to example problems involving state changes of water, heat transfer calculations, psychrometric chart readings, and enthalpy/humidity ratio determinations.
- Key concepts covered include the use of steam tables, Bernoulli's equation, psychrometric equations, and heat transfer relationships for convection and radiation.
A109210305 thermodynamics1
This document contains 8 thermodynamics practice problems and their solutions. It provides details on processes like polytropic expansion, steam turbine cycles, gas mixtures, calorimetry, refrigeration cycles, internal energy, and more. The problems cover concepts in closed, open and isolated systems, the first and second laws of thermodynamics, and applying thermodynamic equations to calculate work, heat and efficiency.
Thermodynamics numericl 2016
The document provides 13 numerical problems related to chemical thermodynamics and energetics. The problems cover topics like work done during gas expansion/compression, standard enthalpy of reaction calculations using bond energies and standard state data, spontaneity of reactions using standard Gibbs free energy and entropy values, heat and enthalpy changes during phase transitions, and calculations involving standard enthalpies of formation.
SI #3 Key
1. The document discusses key concepts from general chemistry including:
- The van der Waals equation accounting for non-zero particle volumes and interparticle interactions.
- Using the ideal gas law to calculate changes in volume with temperature changes.
- The value of the gas constant R at standard temperature and pressure.
- Conversions between various pressure and volume units.
- Calculating moles, pressure, volume, and number of molecules using the ideal gas law.
Introduction to chemical engineering thermodynamics, 6th ed [solution]
This document contains solutions to math problems involving concepts of thermodynamics, including calculations of work, heat, internal energy, enthalpy, and phase changes. Problem 1 calculates the work done in lifting a mass and the resulting internal energy change. Problem 2 determines the heat transferred and final temperature when water gains a small amount of heat. Problem 3 is a series of thermodynamic steps where the initial and final internal energies must sum to zero.
CHM 2045 EXAM 5
This document contains 20 multiple choice questions about topics in chemistry including gas laws, stoichiometry, colligative properties of solutions, and thermochemistry. The questions assess understanding of concepts such as how pressure, volume, temperature, and amount of substance relate for gases based on the ideal gas law; determining amounts of reactants and products from balanced chemical equations; calculating properties of solutions like molality, mole fraction, vapor pressure lowering, boiling point elevation, and freezing point depression; and determining molar masses from experimental data.
First law of thermodynamics
The document summarizes key concepts from thermodynamics including:
- The Zeroth Law of Thermodynamics states that if two systems are each in thermal equilibrium with a third system, they are in thermal equilibrium with each other.
- The First Law of Thermodynamics states that energy cannot be created or destroyed, only changed in form. For a closed system, the net energy transferred as heat and work equals the net change in internal energy.
- Derivations from the First Law relate internal energy change, enthalpy change, and specific heat capacities for constant volume and constant pressure processes. Relationships between specific heat capacities are also derived for ideal gases.
- Several examples show applying the
SI #2 Key
This document provides 13 multiple choice and calculation questions about key concepts in general chemistry including the ideal gas law, density, molar mass, reaction stoichiometry involving gases, and gas behavior. It tests understanding of gas laws, calculations using the ideal gas equation, and properties that affect how real gases deviate from ideal behavior. The final question indicates that an ideal gas is distinguished from real gases by the fact that ideal gas molecules have no attraction for one another.
Thermo problem set no. 2
This document contains a 16 question multiple choice mechanical engineering review problem set. It covers topics including: specific weight calculations, changes in weight due to elevation, pressure and force calculations for scuba diving, determining height using barometer readings, properties of gas mixtures, heat transfer between materials, gas turbine processes, combustion calculations, and thermodynamic processes including changes in temperature, pressure, volume, entropy and heat/work.
Agroklimatologi 7
This document discusses concepts related to atmospheric climate including:
1. It provides equations for calculating barometric pressure, temperature, and density at different heights above sea level.
2. It explains concepts like water vapor pressure, absolute humidity, mixing ratio, specific humidity, and relative humidity. Formulas are given for calculating each of these.
3. An example calculation is shown that determines values like vapor pressure, dew point temperature, relative humidity, specific humidity, mixing ratio, and vapor pressure deficit based on measurements from a psychrometer.
Thermodynamic, examples a
The document provides examples and problems related to thermodynamics. Example 1 involves calculating the final temperature of a system consisting of a brass block and ice water. Example 2 calculates the root mean square speeds of nitrogen and oxygen molecules in air. Example 3 determines the new temperature of an ideal gas that is compressed.
Solution Manual for Physical Chemistry – Robert Alberty
https://www.book4me.xyz/solution-manual-physical-chemistry-alberty/
Solution Manual for Physical Chemistry - 6th Edition
Author(s) : Robert A. Alberty
This solution manual include all chapters of textbook (1 to 21).
Heat and THERMODYNAMICS
This document contains questions about heat and thermodynamics. It covers topics like ideal gases, thermodynamic processes (isothermal, adiabatic, etc.), heat transfer, work, internal energy, specific heat, refrigerators and heat pumps. Some key points:
- An ideal gas's internal energy is in the form of kinetic and potential energy.
- In an adiabatic process, heat is not transferred between states.
- For an isolated system, temperature is constant but other properties like volume and pressure can change.
- The efficiency of Carnot cycle is the maximum of any cycle because it is reversible.
- Specific heat is the heat required to raise the temperature of a substance by
Module 7 - Energy Balance chemical process calculations
Chemical process calculations involve various computations and analyses to design, optimize, and understand chemical processes. Here are some descriptions highlighting different aspects of chemical process calculations:
Material Balances:
Material balances are the cornerstone of chemical process calculations, ensuring that the amounts of all components entering and leaving a system are properly accounted for.
These calculations involve tracking the flow rates and compositions of substances throughout a process, often using mass or mole balances.
Energy Balances:
Energy balances involve quantifying the energy inputs and outputs in a chemical process.
These calculations are crucial for understanding the heat transfer requirements, evaluating energy efficiency, and optimizing process conditions.
Reaction Kinetics:
Chemical reactions kinetics calculations focus on understanding the rates at which reactions occur and how they are influenced by various factors such as temperature, pressure, and catalysts.
These calculations help in determining the optimal reaction conditions and designing reactors for desired conversion rates.
Phase Equilibrium Calculations:
Phase equilibrium calculations deal with determining the distribution of components between different phases in a system, such as liquid-liquid or vapor-liquid equilibrium.
These calculations are essential for designing separation processes like distillation, extraction, and absorption.
Thermodynamic Calculations:
Thermodynamic calculations involve applying thermodynamic principles to predict the behavior of chemical systems.
These calculations include determining properties such as enthalpy, entropy, Gibbs free energy, and fugacity, which are crucial for process design and optimization.
Process Simulation:
Process simulation involves using computer software to model and simulate chemical processes.
These simulations allow engineers to predict process behavior under different operating conditions, optimize process parameters, and troubleshoot potential issues.
7
network error
#17 Key
1. The document contains 7 chemistry problems involving calculation of equilibrium constants (Keq and Kc) for various chemical reactions.
2. Problem 3 calculates Keq as 1.84x10-2 for the decomposition of HI gas into H2 and I2 gases at 425C, given the partial pressures of reactants and products at equilibrium.
3. Problem 7 involves a multiple step chemical equilibrium problem, calculating the initial and equilibrium partial pressures and concentrations of gases in a reaction between CO2, H2 and H2O, and determining the equilibrium constant Kp.
Mass balance: Single-phase System (ideal gas and real gases)
This document provides information on the ideal gas law and its applications. It defines the ideal gas law as PV=nRT, where P is pressure, V is volume, n is moles of gas, R is the gas constant, and T is temperature. It then lists the values of the gas constant R in various units and provides examples of using the ideal gas law and gas stoichiometry to calculate properties such as molar flow rates, densities, and volumes occupied by gases under different conditions.
Combined gas law
PCO2
Ptotal = PN2 + PO2 + PCO2
2.50 atm = 0.90 atm + 0.60 atm + PCO2
PCO2 = 2.50 atm - 0.90 atm - 0.60 atm
PCO2 = 1 atm
So the partial pressure of CO2 is 1 atm.
Chapter2
1) The document discusses water passing through a pressure-reducing valve and separating tank, including its state and amount that leaves as vapor.
2) It also discusses heat transfer calculations for air heated in an exchanger and flow rate measurement using a venturi meter.
3) Heat transfer principles and equations are reviewed for various processes, including perfect gas behavior, convection coefficients, radiation from a human body, and insensible evaporation heat loss.
Chapter 14
This document discusses the expansion of gases and the relationships between pressure, volume, temperature, and number of moles in gases. It introduces the ideal gas law (PV=nRT) and describes some key gas processes including isobaric (constant pressure), isothermal (constant temperature), and isometric (constant volume) processes. Examples are provided to demonstrate how to use the ideal gas law and gas equations of state to calculate pressure, volume, temperature, or number of moles given values of the other variables.
8.0 thermochemistry (student's copy)
This document discusses thermo chemistry and key concepts like enthalpy, calorimetry, and Hess's law. It begins by defining open, closed, and isolated systems and explains endothermic and exothermic reactions using energy profile diagrams. It then discusses enthalpy and defines standard enthalpy. Various types of enthalpies are defined like enthalpy of formation, combustion, atomization, and more. Calorimetry is explained as a method to measure heat changes in reactions using calorimeters. Hess's law is introduced as the principle that the enthalpy change of a reaction is the same whether it occurs in one step or multiple steps.
Me2202 engineering thermodynamics uq - nov dec 2015
This document appears to be an exam for an engineering thermodynamics course, consisting of 15 multi-part questions testing students' knowledge of key thermodynamics concepts. It begins with 10 short answer questions worth 2 marks each, followed by 5 longer form questions worth 16 marks each. The questions cover topics like the laws of thermodynamics, entropy, phase changes, psychrometrics, gas cycles, and thermodynamic processes and cycles. The exam is assessing students' understanding of fundamental thermodynamic principles as well as their ability to apply those principles to analyze thermodynamic systems and cycles.
The Financial Management Decision Process What are the three types of.docx
The Financial Management Decision Process
What are the three types of financial management decisions?
For each type of decision, give an example of a business transaction that would be relevant.
Solution
Three types of financial management decisions are as under:
1. Investment decision
Investment decisions are also called capital budgeting decisions. These decisions involved careful selection of assets / project to be purchased or invested.
Example: Purchasing a machine.
2. Financing decision:
After deciding about the investment, next big decision is arranging the funds for the investment. In this decision management decides the source of finance like : debt, Equity etc.
Example: Issuing common stock to raise funds.
3. Dividend decision:
When Management has invested the fund in the business it will probably earn profits. And now they have to take one more decision that is distributing of profits that is also called as dividend decision.
In this decision they decided how much amount of profits is to be distributed as dividend and how much is to be retained for business.
.
The Federal Reserve attempts to keep prices stable and unemployment lo.docx
The Federal Reserve attempts to keep prices stable and unemployment low. Is there are a contradiction in these objectives? Describe the monetary policy tools that are available to the Federal Reserve to achieve these objectives.
Solution
The Federal Reserve, like many other central banks, is an independent government agency but also one that is ultimately accountable to the public and the Congress. The Congress established maximum employment and stable prices as the key macroeconomic objectives for the Federal Reserve in its conduct of monetary policy. The Congress also structured the Federal Reserve to ensure that its monetary policy decisions focus on achieving these long-run goals and do not become subject to political pressures that could lead to undesirable outcomes. So, members of the Board of Governors are appointed for staggered 14-year terms and the Chairman of the Board is appointed for a four-year term. Elected officials and members of the Administration are not allowed to serve on the Board.
The Federal Reserve does not receive funding through the congressional budgetary process. The Fed\'s income comes primarily from the interest on government securities that it has acquired through open market operations. Other sources of income are the interest on foreign currency investments held by the Federal Reserve System; fees received for services provided to depository institutions, such as check clearing, funds transfers, and automated clearinghouse operations; and interest on loans to depository institutions. After paying its expenses, the Federal Reserve turns the rest of its earnings over to the U.S. Treasury.
.
The following class stores a list of integer values and contains a met.docx
The following class stores a list of integer values and contains a method to return the smallest value in a non-empty list. Make changes and cross out old code as needed to turn this into a generic class that can be used to store lists of any element type E as long as those elements can be compared for ordering (i.e., any type E whose elements support the compareTo method). You can assume the code is adequate otherwise – you don’t need to, for example, add additional tests to guard against null values.
public class MinList f List items; ** Construct new empty list*/ public MinList () { items = new ArrayList ( ); } *add new item x to list * public void add(int x) items.add(x); /** return smallest value in a non-empty list* public int minItem() assert items.size)> e; int minValue-items.get (0); for (int val: items) if (val
Solution
import java.util.ArrayList;
public class MinList<E extends Comparable<E>> {
ArrayList<E> items;
public MinList(){
items = new ArrayList<E>();
}
public void add(E x){
items.add(x);
}
public E minItem(){
assert items.size()>0;
E minValue = items.get(0);
for(E val:items){
if(val.compareTo(minValue) < 0){
minValue = val;
}
}
return minValue;
}
}
.
The following accounts were taken from ABC CompanySolutionCalculation.docx
ABC Company's total assets are $320,000, calculated by adding account receivables, buildings, cash, equipment, inventory, prepaid insurance, and trademarks; and subtracting accumulated depreciation on equipment and buildings. The largest assets are buildings at $81,000, equipment at $68,000, and inventory at $62,000, with total current assets of $171,000 and total fixed assets of $180,000.
The following are key terms in Chapter 14 that relate to regulatory an.docx
The following are key terms in Chapter 14 that relate to regulatory and taxation issues of not-for-profit organizations:
A. Unrelated business income
B. Public charity
C. Charitable solicitation
D. Lobbying
E. Debt financed income
F. Private foundation
G. Propaganda
For each of the following definitions, indicate the key term from the list above that best matches by placing the appropriate letter in the blank space next to the definition.
_____1. A not-for-profit exempt under IRC Sec. 501(c)(3) that receives more of its support from a small number of donors
or investment income than it does from the public at large.
_____ 2. A direct request for credit or financial assistance that will be used for the 501(c)(3)’s mission.
_____ 3. Information that is skewed toward a particular belief with little basis in fact.
_____ 4. Gross income from a trade or business regularly carried on by a tax-exempt organization.
_____ 5. Contacting elected officials to encourage specific legislative action.
Solution
1. F. Private Foundation
2. C. Charitable socialitaton
3. G. Propaganda
4. A. Unrelated business income
5. D. Lobbying
.
The following account balances relate to the stockholders equity accou.docx
The following account balances relate to the stockholders’ equity accounts of Kerbs Corp. at year-end.
2014
2013
A small stock dividend was declared and issued in 2014. The market value of the shares was $11,470. Cash dividends were $15,420 in both 2014 and 2013. The common stock has no par or stated value.
Solution
Journal Entries
2013 ividend Dr 15420
To Cash 15420
2014 Dividend Dr 15420
To Cash 15420
Dividen
.
The following accounts were taken from ABC CompanySolutionCalculation (3).docx
ABC Company's total assets are $320,000, calculated by adding account receivables, buildings, cash, equipment, inventory, prepaid insurance, and trademarks; and subtracting accumulated depreciation on equipment and buildings. The largest assets are buildings at $81,000, equipment at $68,000, and inventory at $62,000, with total current assets of $176,000 and total fixed assets of $180,000.
The following accounts were taken from ABC CompanySolutionCalculation (2).docx
ABC Company's total assets are $320,000, calculated by adding account receivables, buildings, cash, equipment, inventory, prepaid insurance, and trademarks; and subtracting accumulated depreciation on equipment and buildings. The largest assets are buildings at $81,000, equipment at $68,000, and inventory at $62,000, with total current assets of $176,000 and total fixed assets of $180,000.
The following accounts were taken from ABC CompanySolutionCalculation (1).docx
ABC Company's total assets are $320,000, calculated by adding account receivables, buildings, cash, equipment, inventory, prepaid insurance, and trademarks; and subtracting accumulated depreciation on equipment and buildings. The largest assets are buildings at $81,000, equipment at $68,000, and inventory at $62,000, with total current assets of $176,000 and total fixed assets of $180,000.
More Related Content
Similar to PI1- (Sec- 11-8) The vapor pressure of the organie liquid toluene at 2.docx
Thermo problem set no. 2
This document contains a 16 question multiple choice mechanical engineering review problem set. It covers topics including: specific weight calculations, changes in weight due to elevation, pressure and force calculations for scuba diving, determining height using barometer readings, properties of gas mixtures, heat transfer between materials, gas turbine processes, combustion calculations, and thermodynamic processes including changes in temperature, pressure, volume, entropy and heat/work.
Agroklimatologi 7
This document discusses concepts related to atmospheric climate including:
1. It provides equations for calculating barometric pressure, temperature, and density at different heights above sea level.
2. It explains concepts like water vapor pressure, absolute humidity, mixing ratio, specific humidity, and relative humidity. Formulas are given for calculating each of these.
3. An example calculation is shown that determines values like vapor pressure, dew point temperature, relative humidity, specific humidity, mixing ratio, and vapor pressure deficit based on measurements from a psychrometer.
Thermodynamic, examples a
The document provides examples and problems related to thermodynamics. Example 1 involves calculating the final temperature of a system consisting of a brass block and ice water. Example 2 calculates the root mean square speeds of nitrogen and oxygen molecules in air. Example 3 determines the new temperature of an ideal gas that is compressed.
Solution Manual for Physical Chemistry – Robert Alberty
https://www.book4me.xyz/solution-manual-physical-chemistry-alberty/
Solution Manual for Physical Chemistry - 6th Edition
Author(s) : Robert A. Alberty
This solution manual include all chapters of textbook (1 to 21).
Heat and THERMODYNAMICS
This document contains questions about heat and thermodynamics. It covers topics like ideal gases, thermodynamic processes (isothermal, adiabatic, etc.), heat transfer, work, internal energy, specific heat, refrigerators and heat pumps. Some key points:
- An ideal gas's internal energy is in the form of kinetic and potential energy.
- In an adiabatic process, heat is not transferred between states.
- For an isolated system, temperature is constant but other properties like volume and pressure can change.
- The efficiency of Carnot cycle is the maximum of any cycle because it is reversible.
- Specific heat is the heat required to raise the temperature of a substance by
Module 7 - Energy Balance chemical process calculations
Chemical process calculations involve various computations and analyses to design, optimize, and understand chemical processes. Here are some descriptions highlighting different aspects of chemical process calculations:
Material Balances:
Material balances are the cornerstone of chemical process calculations, ensuring that the amounts of all components entering and leaving a system are properly accounted for.
These calculations involve tracking the flow rates and compositions of substances throughout a process, often using mass or mole balances.
Energy Balances:
Energy balances involve quantifying the energy inputs and outputs in a chemical process.
These calculations are crucial for understanding the heat transfer requirements, evaluating energy efficiency, and optimizing process conditions.
Reaction Kinetics:
Chemical reactions kinetics calculations focus on understanding the rates at which reactions occur and how they are influenced by various factors such as temperature, pressure, and catalysts.
These calculations help in determining the optimal reaction conditions and designing reactors for desired conversion rates.
Phase Equilibrium Calculations:
Phase equilibrium calculations deal with determining the distribution of components between different phases in a system, such as liquid-liquid or vapor-liquid equilibrium.
These calculations are essential for designing separation processes like distillation, extraction, and absorption.
Thermodynamic Calculations:
Thermodynamic calculations involve applying thermodynamic principles to predict the behavior of chemical systems.
These calculations include determining properties such as enthalpy, entropy, Gibbs free energy, and fugacity, which are crucial for process design and optimization.
Process Simulation:
Process simulation involves using computer software to model and simulate chemical processes.
These simulations allow engineers to predict process behavior under different operating conditions, optimize process parameters, and troubleshoot potential issues.
7
network error
#17 Key
1. The document contains 7 chemistry problems involving calculation of equilibrium constants (Keq and Kc) for various chemical reactions.
2. Problem 3 calculates Keq as 1.84x10-2 for the decomposition of HI gas into H2 and I2 gases at 425C, given the partial pressures of reactants and products at equilibrium.
3. Problem 7 involves a multiple step chemical equilibrium problem, calculating the initial and equilibrium partial pressures and concentrations of gases in a reaction between CO2, H2 and H2O, and determining the equilibrium constant Kp.
Mass balance: Single-phase System (ideal gas and real gases)
This document provides information on the ideal gas law and its applications. It defines the ideal gas law as PV=nRT, where P is pressure, V is volume, n is moles of gas, R is the gas constant, and T is temperature. It then lists the values of the gas constant R in various units and provides examples of using the ideal gas law and gas stoichiometry to calculate properties such as molar flow rates, densities, and volumes occupied by gases under different conditions.
Combined gas law
PCO2
Ptotal = PN2 + PO2 + PCO2
2.50 atm = 0.90 atm + 0.60 atm + PCO2
PCO2 = 2.50 atm - 0.90 atm - 0.60 atm
PCO2 = 1 atm
So the partial pressure of CO2 is 1 atm.
Chapter2
1) The document discusses water passing through a pressure-reducing valve and separating tank, including its state and amount that leaves as vapor.
2) It also discusses heat transfer calculations for air heated in an exchanger and flow rate measurement using a venturi meter.
3) Heat transfer principles and equations are reviewed for various processes, including perfect gas behavior, convection coefficients, radiation from a human body, and insensible evaporation heat loss.
Chapter 14
This document discusses the expansion of gases and the relationships between pressure, volume, temperature, and number of moles in gases. It introduces the ideal gas law (PV=nRT) and describes some key gas processes including isobaric (constant pressure), isothermal (constant temperature), and isometric (constant volume) processes. Examples are provided to demonstrate how to use the ideal gas law and gas equations of state to calculate pressure, volume, temperature, or number of moles given values of the other variables.
8.0 thermochemistry (student's copy)
This document discusses thermo chemistry and key concepts like enthalpy, calorimetry, and Hess's law. It begins by defining open, closed, and isolated systems and explains endothermic and exothermic reactions using energy profile diagrams. It then discusses enthalpy and defines standard enthalpy. Various types of enthalpies are defined like enthalpy of formation, combustion, atomization, and more. Calorimetry is explained as a method to measure heat changes in reactions using calorimeters. Hess's law is introduced as the principle that the enthalpy change of a reaction is the same whether it occurs in one step or multiple steps.
Me2202 engineering thermodynamics uq - nov dec 2015
This document appears to be an exam for an engineering thermodynamics course, consisting of 15 multi-part questions testing students' knowledge of key thermodynamics concepts. It begins with 10 short answer questions worth 2 marks each, followed by 5 longer form questions worth 16 marks each. The questions cover topics like the laws of thermodynamics, entropy, phase changes, psychrometrics, gas cycles, and thermodynamic processes and cycles. The exam is assessing students' understanding of fundamental thermodynamic principles as well as their ability to apply those principles to analyze thermodynamic systems and cycles.
Similar to PI1- (Sec- 11-8) The vapor pressure of the organie liquid toluene at 2.docx (13)
Solution Manual for Physical Chemistry – Robert Alberty
Solution Manual for Physical Chemistry – Robert Alberty
Module 7 - Energy Balance chemical process calculations
Module 7 - Energy Balance chemical process calculations
Mass balance: Single-phase System (ideal gas and real gases)
Mass balance: Single-phase System (ideal gas and real gases)
Me2202 engineering thermodynamics uq - nov dec 2015
Me2202 engineering thermodynamics uq - nov dec 2015
More from carold11
The Financial Management Decision Process What are the three types of.docx
The Financial Management Decision Process
What are the three types of financial management decisions?
For each type of decision, give an example of a business transaction that would be relevant.
Solution
Three types of financial management decisions are as under:
1. Investment decision
Investment decisions are also called capital budgeting decisions. These decisions involved careful selection of assets / project to be purchased or invested.
Example: Purchasing a machine.
2. Financing decision:
After deciding about the investment, next big decision is arranging the funds for the investment. In this decision management decides the source of finance like : debt, Equity etc.
Example: Issuing common stock to raise funds.
3. Dividend decision:
When Management has invested the fund in the business it will probably earn profits. And now they have to take one more decision that is distributing of profits that is also called as dividend decision.
In this decision they decided how much amount of profits is to be distributed as dividend and how much is to be retained for business.
.
The Federal Reserve attempts to keep prices stable and unemployment lo.docx
The Federal Reserve attempts to keep prices stable and unemployment low. Is there are a contradiction in these objectives? Describe the monetary policy tools that are available to the Federal Reserve to achieve these objectives.
Solution
The Federal Reserve, like many other central banks, is an independent government agency but also one that is ultimately accountable to the public and the Congress. The Congress established maximum employment and stable prices as the key macroeconomic objectives for the Federal Reserve in its conduct of monetary policy. The Congress also structured the Federal Reserve to ensure that its monetary policy decisions focus on achieving these long-run goals and do not become subject to political pressures that could lead to undesirable outcomes. So, members of the Board of Governors are appointed for staggered 14-year terms and the Chairman of the Board is appointed for a four-year term. Elected officials and members of the Administration are not allowed to serve on the Board.
The Federal Reserve does not receive funding through the congressional budgetary process. The Fed\'s income comes primarily from the interest on government securities that it has acquired through open market operations. Other sources of income are the interest on foreign currency investments held by the Federal Reserve System; fees received for services provided to depository institutions, such as check clearing, funds transfers, and automated clearinghouse operations; and interest on loans to depository institutions. After paying its expenses, the Federal Reserve turns the rest of its earnings over to the U.S. Treasury.
.
The following class stores a list of integer values and contains a met.docx
The following class stores a list of integer values and contains a method to return the smallest value in a non-empty list. Make changes and cross out old code as needed to turn this into a generic class that can be used to store lists of any element type E as long as those elements can be compared for ordering (i.e., any type E whose elements support the compareTo method). You can assume the code is adequate otherwise – you don’t need to, for example, add additional tests to guard against null values.
public class MinList f List items; ** Construct new empty list*/ public MinList () { items = new ArrayList ( ); } *add new item x to list * public void add(int x) items.add(x); /** return smallest value in a non-empty list* public int minItem() assert items.size)> e; int minValue-items.get (0); for (int val: items) if (val
Solution
import java.util.ArrayList;
public class MinList<E extends Comparable<E>> {
ArrayList<E> items;
public MinList(){
items = new ArrayList<E>();
}
public void add(E x){
items.add(x);
}
public E minItem(){
assert items.size()>0;
E minValue = items.get(0);
for(E val:items){
if(val.compareTo(minValue) < 0){
minValue = val;
}
}
return minValue;
}
}
.
The following accounts were taken from ABC CompanySolutionCalculation.docx
ABC Company's total assets are $320,000, calculated by adding account receivables, buildings, cash, equipment, inventory, prepaid insurance, and trademarks; and subtracting accumulated depreciation on equipment and buildings. The largest assets are buildings at $81,000, equipment at $68,000, and inventory at $62,000, with total current assets of $171,000 and total fixed assets of $180,000.
The following are key terms in Chapter 14 that relate to regulatory an.docx
The following are key terms in Chapter 14 that relate to regulatory and taxation issues of not-for-profit organizations:
A. Unrelated business income
B. Public charity
C. Charitable solicitation
D. Lobbying
E. Debt financed income
F. Private foundation
G. Propaganda
For each of the following definitions, indicate the key term from the list above that best matches by placing the appropriate letter in the blank space next to the definition.
_____1. A not-for-profit exempt under IRC Sec. 501(c)(3) that receives more of its support from a small number of donors
or investment income than it does from the public at large.
_____ 2. A direct request for credit or financial assistance that will be used for the 501(c)(3)’s mission.
_____ 3. Information that is skewed toward a particular belief with little basis in fact.
_____ 4. Gross income from a trade or business regularly carried on by a tax-exempt organization.
_____ 5. Contacting elected officials to encourage specific legislative action.
Solution
1. F. Private Foundation
2. C. Charitable socialitaton
3. G. Propaganda
4. A. Unrelated business income
5. D. Lobbying
.
The following account balances relate to the stockholders equity accou.docx
The following account balances relate to the stockholders’ equity accounts of Kerbs Corp. at year-end.
2014
2013
A small stock dividend was declared and issued in 2014. The market value of the shares was $11,470. Cash dividends were $15,420 in both 2014 and 2013. The common stock has no par or stated value.
Solution
Journal Entries
2013 ividend Dr 15420
To Cash 15420
2014 Dividend Dr 15420
To Cash 15420
Dividen
.
The following accounts were taken from ABC CompanySolutionCalculation (3).docx
ABC Company's total assets are $320,000, calculated by adding account receivables, buildings, cash, equipment, inventory, prepaid insurance, and trademarks; and subtracting accumulated depreciation on equipment and buildings. The largest assets are buildings at $81,000, equipment at $68,000, and inventory at $62,000, with total current assets of $176,000 and total fixed assets of $180,000.
The following accounts were taken from ABC CompanySolutionCalculation (2).docx
ABC Company's total assets are $320,000, calculated by adding account receivables, buildings, cash, equipment, inventory, prepaid insurance, and trademarks; and subtracting accumulated depreciation on equipment and buildings. The largest assets are buildings at $81,000, equipment at $68,000, and inventory at $62,000, with total current assets of $176,000 and total fixed assets of $180,000.
The following accounts were taken from ABC CompanySolutionCalculation (1).docx
ABC Company's total assets are $320,000, calculated by adding account receivables, buildings, cash, equipment, inventory, prepaid insurance, and trademarks; and subtracting accumulated depreciation on equipment and buildings. The largest assets are buildings at $81,000, equipment at $68,000, and inventory at $62,000, with total current assets of $176,000 and total fixed assets of $180,000.
The fiscal 2012 financial statements of Barney Services shows average.docx
The fiscal 2012 financial statements of Barney Services shows average net operating assets (NOA) of $7,416 million, average net nonoperating obligations (NNO) of $456 million, average total liabilities of $3,508 million, and equity of $7,040 million. The company’s 2012 financial leverage (FLEV) is: Choose from list below:
0.179
0.949
0.061
0.065
Solution
Financial leverage formual = Average net nonoperating obligation / average equity
= 456 / (7416 - 456)
= 456 /6960
= .065
correct option is \"D\" -.065
.
The equity sections from Atticus Group The equity sections from.docx
This document discusses equity calculations for Atticus Group. It shows the calculation of shares allocated to employees which is 20% of net income divided equally among shares. It then lists the number of shares outstanding on different dates as the number changes due to employee hiring and departures.
The executive officers of Rouse Corporation have a performance-based c.docx
The executive officers of Rouse Corporation have a performance-based compensation plan. The performance criteria of this plan is linked to growth in earnings per share. When annual EPS growth is 12%, the Rouse executives earn 100% of the shares; if growth is 16%, they earn 125%. If EPS growth is lower than 8%, the executives receive no additional compensation.
In 2014, Joan Devers, the controller of Rouse, reviews year-end estimates of bad debt expense and warranty expense. She calculates the EPS growth at 15%. Kurt Adkins, a member of the executive group, remarks over lunch one day that the estimate of bad debt expense might be decreased, increasing EPS growth to 16.1%. Devers is not sure she should do this because she believes that the current estimate of bad debts is sound. On the other hand, she recognizes that a great deal of subjectivity is involved in the computation.
Questions
What is the ethical dilemma for Devers?
What are the alternative solutions? Evaluate whether the proposed solution is ethical.
Who are the stakeholders? How are they impacted?
Solution
What is the ethical dilemma for Devers.
Few executives ever see jail even though the results of unethical behavoir can greatly affect stakeholders.
The prevalence of major corporate scandals over the years has helped increase public awareness of two major ethics concepts -- stakeholders and ethical dilemmas. While these concepts are not unique to the study of business, they tend to be more commonly applied to ethical corporate decision making. For example, the corporate social responsibility movement is a direct application of these ideas in real life business practice. But what exactly do they mean?
Stakeholders
Stakeholders are broadly defined as anyone who is impacted by a decision-maker
.
The Federal Reserve had to resort to non-standard methods to try to st.docx
The Federal Reserve had to resort to non-standard methods to try to stimulate the economy the last several years in part because:
it was no longer allowed to change the reserve requirement
inflation was too high
there were no longer any Treasury bonds to buy
the federal funds rate hit the zero lower bound.
Solution
the federal funds rate hit the zero lower bound.
.
The EU recently admitted the Eastern European countries- How do you as.docx
The EU recently admitted the Eastern European countries. How do you assess the impact of the EU\'s expansion? What are the costs and benefits of the expansion for the U.S. economy?
Solution
The accession of eight Central and Eastern
European countries (CEECs) to the European
Union in 2004 will bring some important bene-
fits. The new members will gain from reduced bar-
riers to trade and investment. By 2010, the move-
ment of labor will also be freed. But accession to
the EU is neither a necessary nor a sufficient con-
dition for economic growth. The combined effects
of market access and economic liberalization, not
EU membership, optimize economic growth.
Unfortunately, the incoming EU members had
to choose between the common market on the
one hand and economic liberty on the other.
Instead of concluding free-trade agreements with
the EU, the CEECs were cajoled into an increas-
ingly centralized superstate, in which most of
their comparative advantages will be legislated out
of existence. As a result, economic growth in
Central and Eastern Europe (CEE) will continue
to be suboptimal. The loss of potential future eco-
nomic growth will be only partly offset by the
CEEC
.
The Esposito Import Company had 1 million shares of common stock outst.docx
The Esposito Import Company had 1 million shares of common stock outstanding during 2013. Its income statement reported the following items: income from continuing operations, $5 million; loss from discontinued operations, $1.8 million; extraordinary gain, $2.4 million. All of these amounts are net of tax.
Required:
Prepare the 2013 EPS presentation for the Esposito Import Company. (Round your answers to 2 decimal places.)
Solution
Hi,
Please find the detailed answer as follows:
EPS = (Income from Continuing Operations + Extraordinary Gain - Loss form Discontinued Operations)/Number of Outstanding Shares
EPS = (5 million + 2.4 million - 1.8 million)/1 million = $5.60
Answer is $5.60 .
Thanks.
.
The energy levels of electrons are related to their- a) Position on t.docx
The energy levels of electrons are related to their:
a) Position on the Periodic table
b) Atomic mass units
c) Isobars
d) Shells
e) Isotopes
Solution
The energy levels of electrons are related to their:
d) Shells
An early model of the atom was developed in 1913 by the Danish scientist Niels Bohr (1885–1962). The Bohr model shows the atom as a central nucleus containing protons and neutrons, with the electrons in circular electron shells at specific distances from the nucleus, similar to planets orbiting around the sun. Each electron shell has a different energy level, with those shells closest to the nucleus being lower in energy than those farther from the nucleus. By convention, each shell is assigned a number and the symbol n
.
The Electron in a Hydrogen Atom transforms from its n-1 state to its n.docx
The Electron in a Hydrogen Atom transforms from its n=1 state to its n=3 state.
Does the electron absorb or release energy?
What is the amount of energy assosicated with this transformation?
What will happen after this transition?
List the four quantum numbers of an electron in the ground state of a hydrogen atom.
Solution
E n = (-13.6 eV)/n 2
E 3 = (-13.6 eV)/9 = -1.51 eV
E 1 = (-13.6 eV)/1 = -13.6 eV
Electron losses energy
E = -1.51 - (-13.6) = 12.09 eV
.
The enqueue operation on the Queue ADT adds a new item to the back of (1).docx
The enqueue operation on the Queue ADT adds a new item to the back of the queue where the dequeue operation removes and returns the item from the front of the queue. Now consider an initially empty queue and find the final output for the following sequence of queue operations: enqueue(7); enqueue(9); enqueue(1); dequeue(); enqueue(8); dequeue(); dequeue(); enqueue(6); enqueue(3); dequeue(); enqueue(2); enqueue(1); dequeue();
Solution
import java.util.*;
java.io.*;
java.lang.*;
class Queue {
private ArrayList list;
public Queue() {
list = new ArrayList();
}
public void enqueue(Object object) {
if(list.isFull())
System.out.println(“Queue overflowedâ€);
else
list.add(object);
}
public Object dequeue() {
if(list.isEmpty())
System.out.println(“Queue underflowâ€);
else
return list.remove(list.size() - 1);
}
public boolean isEmpty() {
return list.isEmpty();
}
public Object front() {
return list.get(list.size() - 1);
}
public Object back() {
return list.get(index);
}
public void clear() {
list.clear();
}
}
class QSample
{
public static void main(String args[]) throws Exception
{
Queue q=new Queue();Â Â Â while(true)
{
System.out.println(\"\ \\t QUEUE \");
q.enqueue(7);
q.enqueue(9);
q.enqueue(1);
q.back();
q.dequeue();
q.enqueue(8);
q.dequeue();
q.dequeue();
q.enqueue(6);
q.enqueue(3);
q.dequeue();
q.enqueue(2);
q.enqueue(1);
q.dequeue();
System.out.println(\"Exit\");
}
}
}
The Final output is : 3 2 1
.
The Fed follows the theory of bureaucratic behavior in what sense-.docx
The document discusses how the U.S. Federal Reserve (Fed) follows theories of bureaucratic behavior. Specifically, it presents 5 options for the sense in which the Fed follows this theory: A) avoiding conflict with Congress and the President to preserve autonomy, B) only applying reserve requirements to member banks, C) having its budget controlled by Congress, D) being completely transparent, or E) seeking to achieve policy goals to ensure economic stability. The document does not indicate which option is the solution.
Pay structures Union contracts Wage and price contracts Levels of reve.docx
Pay structures
Union contracts
Wage and price contracts
Levels of revenue
Solution
Ans-19] competition.
Ans-20] labor representation.
Ans-21] Pay structures
Ans-23] None of the above
Ans-24] Collective bargaining
.
More from carold11 (20)
The Financial Management Decision Process What are the three types of.docx
The Financial Management Decision Process What are the three types of.docx
The Federal Reserve attempts to keep prices stable and unemployment lo.docx
The Federal Reserve attempts to keep prices stable and unemployment lo.docx
The following class stores a list of integer values and contains a met.docx
The following class stores a list of integer values and contains a met.docx
The following accounts were taken from ABC CompanySolutionCalculation.docx
The following accounts were taken from ABC CompanySolutionCalculation.docx
The following are key terms in Chapter 14 that relate to regulatory an.docx
The following are key terms in Chapter 14 that relate to regulatory an.docx
The following account balances relate to the stockholders equity accou.docx
The following account balances relate to the stockholders equity accou.docx
The following accounts were taken from ABC CompanySolutionCalculation (3).docx
The following accounts were taken from ABC CompanySolutionCalculation (3).docx
The following accounts were taken from ABC CompanySolutionCalculation (2).docx
The following accounts were taken from ABC CompanySolutionCalculation (2).docx
The following accounts were taken from ABC CompanySolutionCalculation (1).docx
The following accounts were taken from ABC CompanySolutionCalculation (1).docx
The fiscal 2012 financial statements of Barney Services shows average.docx
The fiscal 2012 financial statements of Barney Services shows average.docx
The equity sections from Atticus Group The equity sections from.docx
The equity sections from Atticus Group The equity sections from.docx
The executive officers of Rouse Corporation have a performance-based c.docx
The executive officers of Rouse Corporation have a performance-based c.docx
The Federal Reserve had to resort to non-standard methods to try to st.docx
The Federal Reserve had to resort to non-standard methods to try to st.docx
The EU recently admitted the Eastern European countries- How do you as.docx
The EU recently admitted the Eastern European countries- How do you as.docx
The Esposito Import Company had 1 million shares of common stock outst.docx
The Esposito Import Company had 1 million shares of common stock outst.docx
The energy levels of electrons are related to their- a) Position on t.docx
The energy levels of electrons are related to their- a) Position on t.docx
The Electron in a Hydrogen Atom transforms from its n-1 state to its n.docx
The Electron in a Hydrogen Atom transforms from its n-1 state to its n.docx
The enqueue operation on the Queue ADT adds a new item to the back of (1).docx
The enqueue operation on the Queue ADT adds a new item to the back of (1).docx
The Fed follows the theory of bureaucratic behavior in what sense-.docx
The Fed follows the theory of bureaucratic behavior in what sense-.docx
Pay structures Union contracts Wage and price contracts Levels of reve.docx
Pay structures Union contracts Wage and price contracts Levels of reve.docx
Recently uploaded
Gender and Mental Health - Counselling and Family Therapy Applications and In...
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Whether you're new to SEO or looking to refine your existing strategies, this webinar will provide you with actionable insights and practical tips to elevate your nonprofit's online presence.
How Barcodes Can Be Leveraged Within Odoo 17
In this presentation, we will explore how barcodes can be leveraged within Odoo 17 to streamline our manufacturing processes. We will cover the configuration steps, how to utilize barcodes in different manufacturing scenarios, and the overall benefits of implementing this technology.
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...Nguyen Thanh Tu Collection
https://app.box.com/s/qspvswamcohjtbvbbhjad04lg65waylfBÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdanePhilippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
NIPER JEE PYQ
NIPER JEE QUESTIONS
MOST FREQUENTLY ASK QUESTIONS
NIPER MEMORY BASED QUWSTIONS
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
مصحف أحرف الخلاف للقراء العشرةأعد أحرف الخلاف بالتلوين وصلا سمير بسيوني غفر الله له
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
The History of NZ 1870-1900.
Making of a Nation.
From the NZ Wars to Liberals,
Richard Seddon, George Grey,
Social Laboratory, New Zealand,
Confiscations, Kotahitanga, Kingitanga, Parliament, Suffrage, Repudiation, Economic Change, Agriculture, Gold Mining, Timber, Flax, Sheep, Dairying,
THE SACRIFICE HOW PRO-PALESTINE PROTESTS STUDENTS ARE SACRIFICING TO CHANGE T...
The recent surge in pro-Palestine student activism has prompted significant responses from universities, ranging from negotiations and divestment commitments to increased transparency about investments in companies supporting the war on Gaza. This activism has led to the cessation of student encampments but also highlighted the substantial sacrifices made by students, including academic disruptions and personal risks. The primary drivers of these protests are poor university administration, lack of transparency, and inadequate communication between officials and students. This study examines the profound emotional, psychological, and professional impacts on students engaged in pro-Palestine protests, focusing on Generation Z's (Gen-Z) activism dynamics. This paper explores the significant sacrifices made by these students and even the professors supporting the pro-Palestine movement, with a focus on recent global movements. Through an in-depth analysis of printed and electronic media, the study examines the impacts of these sacrifices on the academic and personal lives of those involved. The paper highlights examples from various universities, demonstrating student activism's long-term and short-term effects, including disciplinary actions, social backlash, and career implications. The researchers also explore the broader implications of student sacrifices. The findings reveal that these sacrifices are driven by a profound commitment to justice and human rights, and are influenced by the increasing availability of information, peer interactions, and personal convictions. The study also discusses the broader implications of this activism, comparing it to historical precedents and assessing its potential to influence policy and public opinion. The emotional and psychological toll on student activists is significant, but their sense of purpose and community support mitigates some of these challenges. However, the researchers call for acknowledging the broader Impact of these sacrifices on the future global movement of FreePalestine.
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"National Information Standards Organization (NISO)
This presentation was provided by Racquel Jemison, Ph.D., Christina MacLaughlin, Ph.D., and Paulomi Majumder. Ph.D., all of the American Chemical Society, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.Recently uploaded (20)
REASIGNACION 2024 UGEL CHUPACA 2024 UGEL CHUPACA.pdf
REASIGNACION 2024 UGEL CHUPACA 2024 UGEL CHUPACA.pdf
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
Juneteenth Freedom Day 2024 David Douglas School District
Juneteenth Freedom Day 2024 David Douglas School District
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
THE SACRIFICE HOW PRO-PALESTINE PROTESTS STUDENTS ARE SACRIFICING TO CHANGE T...
THE SACRIFICE HOW PRO-PALESTINE PROTESTS STUDENTS ARE SACRIFICING TO CHANGE T...
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"
PI1- (Sec- 11-8) The vapor pressure of the organie liquid toluene at 2.docx
- 1. PI1. (Sec. 11.8) The vapor pressure of the organie liquid toluene at 20.0 °C is 22 is the new temperature, in °C, if the vapor pressure is increased 42 mmHg? (All",-40.6 kJ/mol) & (R- 8314 J / mol . K) mm H g What a) 24.2 °C b) 25.6 °C c) 28.1 °C d) 31.8 °C e) 39.5 °C P12. (Sec. 11.8) The vapor pressure of the organic solid naphthalene at 25 °C is 0.087 mm Hg. What is the new temperature, in °C, if the vapor pressure is carefully increased to 0.287 mmHg? AHvap 56.1 kJ/mol) & (R- 8.314J/mol K) a) 11.9°C b) 41.5 °C c) 23.4°C d) 35.4 °C e) 50.2 °c P13. (Sec. 11.8) The heat of vaporization (AHap)for water is 40.6 kJ/mol. How much energy, in kJ, is needed to convert 55.5 grams of liquid water to steam at 100 °C? a) 67.1 kJ b) 98.1 kJ c) 202 kJ d) 76.9 kJ e) 125 kJ P14. (Sec. 11.9) On the phase diagram shown below, segmentcorresponds to the conditions of temperature and pressure under which the solid and the gas of the substance are in equilibriumm Solution 11) T1 = 20.0 oC =(20.0 + 273)K = 293.0 K P1 = 22 mmHg P2 = 42 mmHg ?H = 40.6 KJ/mol = 40600.0 J/mol use: ln(P2/P1) = (?H/R)*(1/T1 - 1/T2) ln(42.0/22) = (40600.0/8.314)*(1/293.0 - 1/T2)
- 2. 0.6466 = 4883.3293*(1/293.0 - 1/T2) T2 = 305 K = (305-273) oC = 32 oC Answer: d 12) T1 = 25.0 oC =(25.0 + 273)K = 298.0 K P1 = 8.7*10^-2 mmHg P2 = 0.287 mmHg ?H = 56.1 KJ/mol = 56100.0 J/mol use: ln(P2/P1) = (?H/R)*(1/T1 - 1/T2) ln(0.287/8.7*10^-2) = (56100.0/8.314)*(1/298.0 - 1/T2) 1.1936 = 6747.6546*(1/298.0 - 1/T2) T2 = 315 K = (315-273) oC = 42 oC Answer: b Only 1 question at a time please