- Journal clubs are proposed as a way to engage employees and improve retention during economic downturns when projects are reduced. They involve employees studying research papers and sharing learning with peers.
- Benefits include stimulating intellectual growth, improving soft skills like communication, and promoting networking and team spirit. This engagement demonstrates organizational commitment and increases employee motivation and commitment to work.
- A case study found that creating a journal club improved employee motivation levels and engagement with work and the organization.
This Toolkit was created by ex-McKinsey, Deloitte and BCG Management Consultants after more than 3,000 hours of work. It shares our combined 100+ years of experience advising executive teams around the world. It includes all the Frameworks, Best Practices & Templates required to successfully implement an operating model and organization design initiative, and make your strategy happen.
This Toolkit was created by ex-McKinsey, Deloitte and BCG Management Consultants after more than 3,000 hours of work. It shares our combined 100+ years of experience advising executive teams around the world. It includes all the Frameworks, Best Practices & Templates required to successfully implement an operating model and organization design initiative, and make your strategy happen.
Strategy Planning and Deployment Process Training ModuleFrank-G. Adler
The Strategy Planning and Deployment Training Module v6.0 includes:
1. MS PowerPoint Presentation including 97 slides covering our Strategy Planning and Deployment Process using Strategy Maps and Hoshin Kanri, including Introduction to Strategy Planning, Organizing the Process, Current State Analysis (CSA), Strategic Vision Elements, Strategic Breakthrough Objectives, Strategy Maps, Strategic Initiatives and Tactics, Strategy Deployment Matrix, and Strategy Implementation and Review.
2. MS Excel Templates for Annual Planning, Criticality Analysis, Force Field Analysis, Radar Gap Analysis Chart, Strategy Grid Alignment Matrix, Strategy Grid Correlation Matrix, Project Selection Matrix, Bowling Chart, and Strategy Implementation Review Table.
3. MS Word Current State Analysis (CSA) Questionnaire
4. MS Excel Hoshin Kanri Strategy Deployment X-Matrix Template
The video of the workshop can be viewed at http://goo.gl/OaULcB .
Workshop Details :
Panel Session: Building the skills for tomorrow
Moderator: Ikhwan Nazri (CEO of Amanz.my), Prof. Dr. Ahmad Rafi Mohamed Eshaq (Vice President of MMU), Imran Kunalan Abdullah (Director of MDeC), Samuel Wee (GM, REV Asia), Desmond Lee (Co-founder of Appxplore)
The MSA Launch (http://bit.ly/1yhQPZV) is a 5-day event aiming to provide an introduction to MaGIC Academy. It is presented as a condensed version of how MaGIC Academy is going to contribute to you and the startup community. You will be able to experience a series of workshops, skill and sharing knowledge opportunity, and mentoring with our selected network of mentors.
Website : www.mymagic.my
Facebook : https://www.facebook.com/magic.cyberjaya
Twitter : https://twitter.com/magiccyberjaya
Youtube : http://goo.gl/HvrRLa
SlideShare : http://slidesha.re/1BfSncP
Email : enquiries@mymagic.my
The Porter’s Five Forces model is a simple tool that can be utilized to help strategic understanding where power lies in a business situation. The tool can also be used to understand both the strength of a company’s current competitive position, alongside the strength of a position the company may be looking to move into. The Five forces framework focuses on business concerns rather than public policy but it can also emphasize extended competition for value rather than just competition among existing rivals. The ease of its use has inspired numerous companies as well as business schools to adopt it.
P-CMM is a process based model which focuses on effectively executing HR day-to-day processes and functions. Once these processes become standardized and continue to be improved for broader purposes, they can be simulated and even transferred to diverse areas within an organization. Also with this process orientation in a progressive scope, P-CMM provides an operational direction of HR benchmarking, which can not only be used to diagnose and analyze the current stage but also to predict and provide for the future stage.
Six-Box model was used primarily as an organizing device. It is allowed for logical organization of thoughts and data. It also facilitated the prioritization of recommendations. This model provides a strong foundation for assessing organizations. It is also useful as a "quick look" tool to determine one's strategy for dealing or working with an organization.
Redefining Corporate Innovation Performance Measurement
The core of the case study ‘Redefining Corporate Innovation Performance Measurement’ is a framework dedicated to the performance assessment of a multitude of innovation unit archetypes. A set of premises, which replenish the output evaluation method, precedes the framework. In the beginning, a categorization of different corporate innovation unit archetypes introduces the topic. In the end, an opinion on COVID-19’s impact on corporate innovation rounds the case study off.
Competency Management involves identification, extraction of the knowledge, skills, attitudes and behaviours of top performers and replicating them in others through suitable Learning & Development. Competencies can be defined as knowledge, skills, mind-sets and, thought patterns resulting in successful performance.
Dear students get fully solved assignments
Send your semester & Specialization name to our mail id :
help.mbaassignments@gmail.com
or
call us at : 08263069601
Leveraging WSQ for Competency Based Training & AssessmentsWei Koon GOH, MBA
A presentation that I did for the DACE program to make comparison with UK NVQ and Singapore WSQ national qualification system, as well as the emerging trends in Singapore.
When training is reactionary, boring, irrelevant and inapplicable to the job, what does an organisation do? It is faced with a dilemma and needs to find a way to justify training spend. Our process to transform your team in one week called SPEEDChange® is the answer to the training that never really brings the ROI. Change In A Week™ when training is simply not enough.
Skills Development Best Practices for Training Committees Charles Cotter, PhD
Skills development legislation, strategies, best practice principles, training administration, the roles, responsibilities and function of a Training Committee and core training processes
How Employee Learning and Development Can Drive Business Growth.pdfMenTutor
Investing in employee learning and development can lead to business growth. Discover the benefits, strategies, and best practices for effective employee training programs, including mentorship, alignment with company goals, and creating a culture of continuous learning. Overcome challenges such as limited budget and resistance to change to improve employee productivity, quality of work, customer satisfaction, innovation, and more.
Strategy Planning and Deployment Process Training ModuleFrank-G. Adler
The Strategy Planning and Deployment Training Module v6.0 includes:
1. MS PowerPoint Presentation including 97 slides covering our Strategy Planning and Deployment Process using Strategy Maps and Hoshin Kanri, including Introduction to Strategy Planning, Organizing the Process, Current State Analysis (CSA), Strategic Vision Elements, Strategic Breakthrough Objectives, Strategy Maps, Strategic Initiatives and Tactics, Strategy Deployment Matrix, and Strategy Implementation and Review.
2. MS Excel Templates for Annual Planning, Criticality Analysis, Force Field Analysis, Radar Gap Analysis Chart, Strategy Grid Alignment Matrix, Strategy Grid Correlation Matrix, Project Selection Matrix, Bowling Chart, and Strategy Implementation Review Table.
3. MS Word Current State Analysis (CSA) Questionnaire
4. MS Excel Hoshin Kanri Strategy Deployment X-Matrix Template
The video of the workshop can be viewed at http://goo.gl/OaULcB .
Workshop Details :
Panel Session: Building the skills for tomorrow
Moderator: Ikhwan Nazri (CEO of Amanz.my), Prof. Dr. Ahmad Rafi Mohamed Eshaq (Vice President of MMU), Imran Kunalan Abdullah (Director of MDeC), Samuel Wee (GM, REV Asia), Desmond Lee (Co-founder of Appxplore)
The MSA Launch (http://bit.ly/1yhQPZV) is a 5-day event aiming to provide an introduction to MaGIC Academy. It is presented as a condensed version of how MaGIC Academy is going to contribute to you and the startup community. You will be able to experience a series of workshops, skill and sharing knowledge opportunity, and mentoring with our selected network of mentors.
Website : www.mymagic.my
Facebook : https://www.facebook.com/magic.cyberjaya
Twitter : https://twitter.com/magiccyberjaya
Youtube : http://goo.gl/HvrRLa
SlideShare : http://slidesha.re/1BfSncP
Email : enquiries@mymagic.my
The Porter’s Five Forces model is a simple tool that can be utilized to help strategic understanding where power lies in a business situation. The tool can also be used to understand both the strength of a company’s current competitive position, alongside the strength of a position the company may be looking to move into. The Five forces framework focuses on business concerns rather than public policy but it can also emphasize extended competition for value rather than just competition among existing rivals. The ease of its use has inspired numerous companies as well as business schools to adopt it.
P-CMM is a process based model which focuses on effectively executing HR day-to-day processes and functions. Once these processes become standardized and continue to be improved for broader purposes, they can be simulated and even transferred to diverse areas within an organization. Also with this process orientation in a progressive scope, P-CMM provides an operational direction of HR benchmarking, which can not only be used to diagnose and analyze the current stage but also to predict and provide for the future stage.
Six-Box model was used primarily as an organizing device. It is allowed for logical organization of thoughts and data. It also facilitated the prioritization of recommendations. This model provides a strong foundation for assessing organizations. It is also useful as a "quick look" tool to determine one's strategy for dealing or working with an organization.
Redefining Corporate Innovation Performance Measurement
The core of the case study ‘Redefining Corporate Innovation Performance Measurement’ is a framework dedicated to the performance assessment of a multitude of innovation unit archetypes. A set of premises, which replenish the output evaluation method, precedes the framework. In the beginning, a categorization of different corporate innovation unit archetypes introduces the topic. In the end, an opinion on COVID-19’s impact on corporate innovation rounds the case study off.
Competency Management involves identification, extraction of the knowledge, skills, attitudes and behaviours of top performers and replicating them in others through suitable Learning & Development. Competencies can be defined as knowledge, skills, mind-sets and, thought patterns resulting in successful performance.
Dear students get fully solved assignments
Send your semester & Specialization name to our mail id :
help.mbaassignments@gmail.com
or
call us at : 08263069601
Leveraging WSQ for Competency Based Training & AssessmentsWei Koon GOH, MBA
A presentation that I did for the DACE program to make comparison with UK NVQ and Singapore WSQ national qualification system, as well as the emerging trends in Singapore.
When training is reactionary, boring, irrelevant and inapplicable to the job, what does an organisation do? It is faced with a dilemma and needs to find a way to justify training spend. Our process to transform your team in one week called SPEEDChange® is the answer to the training that never really brings the ROI. Change In A Week™ when training is simply not enough.
Skills Development Best Practices for Training Committees Charles Cotter, PhD
Skills development legislation, strategies, best practice principles, training administration, the roles, responsibilities and function of a Training Committee and core training processes
How Employee Learning and Development Can Drive Business Growth.pdfMenTutor
Investing in employee learning and development can lead to business growth. Discover the benefits, strategies, and best practices for effective employee training programs, including mentorship, alignment with company goals, and creating a culture of continuous learning. Overcome challenges such as limited budget and resistance to change to improve employee productivity, quality of work, customer satisfaction, innovation, and more.
Why is Employee Skill Development Important to the Organization.pdfMr. Business Magazine
Employee skill development is a win-win situation for both the employee and the organization. The organization will grow as employee uses his skill to perform better and efficient when at work.
This PowerPoint presentation, titled "HR for Non HR: Learning & Development (L&D)," is designed to provide non-HR professionals with an understanding of the significance and components of L&D in the workplace. The deck covers topics such as the importance of acquiring new skills, the ongoing process of enhancing individual and organizational performance, and key facts highlighting the value of L&D. It also delves into the components of learning and development, including learning, development, training, and education. The presentation emphasizes the need for organizations to prioritize L&D to foster a culture of continuous learning, innovation, and adaptability.
Running Head TRAINING AND DEVELOPMENT PROPOSALTRAINING AND DE.docxagnesdcarey33086
Running Head: TRAINING AND DEVELOPMENT PROPOSAL
TRAINING AND DEVELOPMENT PROPOSAL
11
Training And Development Proposal
Katrina A. Kinlow
Dr. T.A. Swinney
335 – Training and Development
February 1, 2015
Training and Development Proposal
Introduction
Computer Aided Design
Solution
s is a small business that has been started to provide solutions to design problems. The scope of the business ranges from design of machinery and structures like buildings to household vessels. The design program has to be taught to individuals to enable them to inductively participate competently in the market of design solutions. I always get invited to offer consulting services in this field. I will draw heavily from my experience when I provide training and development services to this business. There are numerous challenges to be overcome for one to be successful as I will show herein.
Training Methods to Be Used
Good learning and development initiatives in the Design field always feature a combination of many methods that, blended together, produce one effective training program. Below are some of the ways of delivering training and development activities for the consulting services.
Orientation
Orientation will familiarize the new trainees with the field of Computer Aided Design. It will be conducted through training manuals, a one-on-one meeting with a consultant who will give a lecture. Newcomers will receive information on our company's history and strategic position, the key people in authority at the business, the structure of departments and how they contribute to the overall mission of the enterprise, and the employment policies, rules, and regulations.
Lectures
Lecturers are a verbal method of presenting information; lectures are mainly useful in situations when the goal is to impart the same information to a large number of people at one time.
Case Study
The Case study method of training is a non-directed method of study where trainees are given practical case reports with similar situations and facts as the current situation to analyze. The case report includes a thorough description of a simulated or real-life situation.
Role Playing
Students assume a role outside of their current role and responsibilities and play out that role within a group. A facilitator creates a scenario that is to be acted out by the participants under the guidance of the facilitator. While the situation might be contrived, the interpersonal relations are genuine. In addition, participants receive immediate feedback from the facilitator and the scenario itself, allowing better understanding of their behavior.
Computer-Based Training
This method of training will involve the use of computers and computer-based instructional materials as the primary medium of instruction. Computer-based training programs will be useful to structure and present instructional materials, as well as facilitate the learning process for the trainee.
Elements of Training and Developmen.
A planned process to modify attitude , knowledge or skill behaviour through learning experience to achieve effective performance in an activity or range of activities. Its purpose, in the work situation, is to develop the abilities of the individual and to satisfy the current and future needs of the organization.
The identification of training needs has been done by keeping the individual and organization as the base point, in this second part of the slide of lesson “Training Needs Analysis” brought to you by Welingkar’s Distance Learning Division, explained is the Analysis of Training, its needs individually, inside a group etc.
For more such innovative content on management studies, join WeSchool PGDM-DLP Program: http://bit.ly/effectivehrtrainingslides
Join us on Facebook: http://www.facebook.com/welearnindia
Read our latest blog at: http://welearnindia.wordpress.com
Subscribe to our Slideshare Channel: http://www.slideshare.net/welingkarDLP
Premium MEAN Stack Development Solutions for Modern BusinessesSynapseIndia
Stay ahead of the curve with our premium MEAN Stack Development Solutions. Our expert developers utilize MongoDB, Express.js, AngularJS, and Node.js to create modern and responsive web applications. Trust us for cutting-edge solutions that drive your business growth and success.
Know more: https://www.synapseindia.com/technology/mean-stack-development-company.html
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
Attending a job Interview for B1 and B2 Englsih learnersErika906060
It is a sample of an interview for a business english class for pre-intermediate and intermediate english students with emphasis on the speking ability.
"𝑩𝑬𝑮𝑼𝑵 𝑾𝑰𝑻𝑯 𝑻𝑱 𝑰𝑺 𝑯𝑨𝑳𝑭 𝑫𝑶𝑵𝑬"
𝐓𝐉 𝐂𝐨𝐦𝐬 (𝐓𝐉 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬) is a professional event agency that includes experts in the event-organizing market in Vietnam, Korea, and ASEAN countries. We provide unlimited types of events from Music concerts, Fan meetings, and Culture festivals to Corporate events, Internal company events, Golf tournaments, MICE events, and Exhibitions.
𝐓𝐉 𝐂𝐨𝐦𝐬 provides unlimited package services including such as Event organizing, Event planning, Event production, Manpower, PR marketing, Design 2D/3D, VIP protocols, Interpreter agency, etc.
Sports events - Golf competitions/billiards competitions/company sports events: dynamic and challenging
⭐ 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐝 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬:
➢ 2024 BAEKHYUN [Lonsdaleite] IN HO CHI MINH
➢ SUPER JUNIOR-L.S.S. THE SHOW : Th3ee Guys in HO CHI MINH
➢FreenBecky 1st Fan Meeting in Vietnam
➢CHILDREN ART EXHIBITION 2024: BEYOND BARRIERS
➢ WOW K-Music Festival 2023
➢ Winner [CROSS] Tour in HCM
➢ Super Show 9 in HCM with Super Junior
➢ HCMC - Gyeongsangbuk-do Culture and Tourism Festival
➢ Korean Vietnam Partnership - Fair with LG
➢ Korean President visits Samsung Electronics R&D Center
➢ Vietnam Food Expo with Lotte Wellfood
"𝐄𝐯𝐞𝐫𝐲 𝐞𝐯𝐞𝐧𝐭 𝐢𝐬 𝐚 𝐬𝐭𝐨𝐫𝐲, 𝐚 𝐬𝐩𝐞𝐜𝐢𝐚𝐥 𝐣𝐨𝐮𝐫𝐧𝐞𝐲. 𝐖𝐞 𝐚𝐥𝐰𝐚𝐲𝐬 𝐛𝐞𝐥𝐢𝐞𝐯𝐞 𝐭𝐡𝐚𝐭 𝐬𝐡𝐨𝐫𝐭𝐥𝐲 𝐲𝐨𝐮 𝐰𝐢𝐥𝐥 𝐛𝐞 𝐚 𝐩𝐚𝐫𝐭 𝐨𝐟 𝐨𝐮𝐫 𝐬𝐭𝐨𝐫𝐢𝐞𝐬."
Implicitly or explicitly all competing businesses employ a strategy to select a mix
of marketing resources. Formulating such competitive strategies fundamentally
involves recognizing relationships between elements of the marketing mix (e.g.,
price and product quality), as well as assessing competitive and market conditions
(i.e., industry structure in the language of economics).
Putting the SPARK into Virtual Training.pptxCynthia Clay
This 60-minute webinar, sponsored by Adobe, was delivered for the Training Mag Network. It explored the five elements of SPARK: Storytelling, Purpose, Action, Relationships, and Kudos. Knowing how to tell a well-structured story is key to building long-term memory. Stating a clear purpose that doesn't take away from the discovery learning process is critical. Ensuring that people move from theory to practical application is imperative. Creating strong social learning is the key to commitment and engagement. Validating and affirming participants' comments is the way to create a positive learning environment.
Memorandum Of Association Constitution of Company.pptseri bangash
www.seribangash.com
A Memorandum of Association (MOA) is a legal document that outlines the fundamental principles and objectives upon which a company operates. It serves as the company's charter or constitution and defines the scope of its activities. Here's a detailed note on the MOA:
Contents of Memorandum of Association:
Name Clause: This clause states the name of the company, which should end with words like "Limited" or "Ltd." for a public limited company and "Private Limited" or "Pvt. Ltd." for a private limited company.
https://seribangash.com/article-of-association-is-legal-doc-of-company/
Registered Office Clause: It specifies the location where the company's registered office is situated. This office is where all official communications and notices are sent.
Objective Clause: This clause delineates the main objectives for which the company is formed. It's important to define these objectives clearly, as the company cannot undertake activities beyond those mentioned in this clause.
www.seribangash.com
Liability Clause: It outlines the extent of liability of the company's members. In the case of companies limited by shares, the liability of members is limited to the amount unpaid on their shares. For companies limited by guarantee, members' liability is limited to the amount they undertake to contribute if the company is wound up.
https://seribangash.com/promotors-is-person-conceived-formation-company/
Capital Clause: This clause specifies the authorized capital of the company, i.e., the maximum amount of share capital the company is authorized to issue. It also mentions the division of this capital into shares and their respective nominal value.
Association Clause: It simply states that the subscribers wish to form a company and agree to become members of it, in accordance with the terms of the MOA.
Importance of Memorandum of Association:
Legal Requirement: The MOA is a legal requirement for the formation of a company. It must be filed with the Registrar of Companies during the incorporation process.
Constitutional Document: It serves as the company's constitutional document, defining its scope, powers, and limitations.
Protection of Members: It protects the interests of the company's members by clearly defining the objectives and limiting their liability.
External Communication: It provides clarity to external parties, such as investors, creditors, and regulatory authorities, regarding the company's objectives and powers.
https://seribangash.com/difference-public-and-private-company-law/
Binding Authority: The company and its members are bound by the provisions of the MOA. Any action taken beyond its scope may be considered ultra vires (beyond the powers) of the company and therefore void.
Amendment of MOA:
While the MOA lays down the company's fundamental principles, it is not entirely immutable. It can be amended, but only under specific circumstances and in compliance with legal procedures. Amendments typically require shareholder
Unveiling the Secrets How Does Generative AI Work.pdfSam H
At its core, generative artificial intelligence relies on the concept of generative models, which serve as engines that churn out entirely new data resembling their training data. It is like a sculptor who has studied so many forms found in nature and then uses this knowledge to create sculptures from his imagination that have never been seen before anywhere else. If taken to cyberspace, gans work almost the same way.
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
Business Valuation Principles for EntrepreneursBen Wann
This insightful presentation is designed to equip entrepreneurs with the essential knowledge and tools needed to accurately value their businesses. Understanding business valuation is crucial for making informed decisions, whether you're seeking investment, planning to sell, or simply want to gauge your company's worth.
What is the TDS Return Filing Due Date for FY 2024-25.pdfseoforlegalpillers
It is crucial for the taxpayers to understand about the TDS Return Filing Due Date, so that they can fulfill your TDS obligations efficiently. Taxpayers can avoid penalties by sticking to the deadlines and by accurate filing of TDS. Timely filing of TDS will make sure about the availability of tax credits. You can also seek the professional guidance of experts like Legal Pillers for timely filing of the TDS Return.
What is the TDS Return Filing Due Date for FY 2024-25.pdf
Peeta basapati salakasivananda
1. High Skilled Talent Retention through Journal Clubs
Peeta Basa Pati, Salaka Sivananda
Cognizant Technology Solutions, Bangalore, INDIA
{PeetaBasa.Pati, Sivananda.s}@Cognizant.com
2. 1
ABSTRACT
Human capital is the key to organizational efficiency and therefore, HR department & Functional
managers are looking for new ways to acquire & retain talent in tough markets.
Meeting & sustaining the ever growing demands of good talent in IT industry is a big challenge with
employees constantly looking to up-skill their knowhow through challenging assignments and looking for
opportunities elsewhere.
Economic downturns create a chaotic situation for the IT industry. Curtailments of existing and new
projects reduce employee engagement causing severe concerns such as head-count reductions &
insecurity. However, some organizations devised innovative strategies to engage employees in
productive activities. Such efforts have resulted in improved employee morale, loyalty & satisfaction, while
also strengthening the organization’s IP portfolio.
One way to keep employees engaged during these times is to conduct journal clubs. In these clubs
employees study research papers from various scientific / technical journals and share the learning with
their peers. The benefits from this are:
1. Stimulates intellectually and helps stay in touch with cutting edge research
2. Improves the interpersonal communication and soft skills
3. Promotes networking & team spirit
4. Explore new ideas and innovation
Investment in the employees’ learning & development is seen as a promising sign of the organization’s
commitment. Employees demonstrate a new zeal to generate tangible outcomes, thereby potentially
contributing to the organization’s IP portfolio.
This paper presents a case study of implementation of this technique. It was observed that once the club
was created and made functional, the motivation level of the employees improved with enhanced levels of
commitment to work and organization.
KEYWORDS
Journal club, talent retention, employee engagement
INTRODUCTION
The IT industry is heavily influenced by the global economy and growing competition from other nations.
The economic swings lead to increased competition amongst the industry’s champions to consolidate
their existing customer base, while looking forward to add new clientele. Retaining high customer
satisfaction demands successful delivery & relationship. For successful delivery it is essential for the
organization to have good & motivated talent with the right skills & attitudes.
Employees who stay with an organization for long attribute their loyalty to some of the following reasons
(and not limited to): employee-friendly work environment & policies, technically challenging assignments,
3. 2
promising client line-up, talent improvement avenues, and attractive compensation & benefits. In this
paper, the focus shall remain on talent management & encouragement.
Talent retention & growth is a hot topic in most forward looking IT organizations. People at different levels
are given various avenues of improving their technical, managerial, and soft skills. Trainings (classroom
or computer-based), workshops, seminars & conferences are the most prominent options.
In large IT services organizations, people resources are usually allocated to a project. Upon completion of
a project they are either moved to another instantly or wait in anticipation of another forthcoming. While
on a project, the technical trainings are more focused towards the specifics for that project. Functional
managers demand custom trainings oriented towards project-specific needs to be arranged for their
teams. Additionally, subject-matter-experts within the organization may be tapped for informal insights.
When off a project, employees are expected to cross-skill or up-skill so that they become deployable.
Talent managers have an agenda every year to ensure that across the organization a standard set of
trainings are conducted basis the general feedback obtained from across teams.
Besides the regular streams of learning, having ad-hoc programs with a focus on specific topics can be
great motivators. One such exercise was of having a journal club which chose a particular topic for a
collective study & analysis to understand it better in a shorter time span. The topics could range from
technical, managerial, leadership, communication or other soft skills.
The objectives were multi-fold regardless of whether the topic was technical or otherwise:
1. Sourcing inputs through collective participation of the group
2. Preparatory brainstorming to arrive at a common consensus of understanding
3. Make a formal presentation to the group and invite questions / debates
4. Receive feedback for further analysis with a time-bound action plan to re-present
CHALLENGES OF TALENT RETENTION
Knowledge-workers are the key to the IT industry. A constant and consistent effort to encourage, tap and
promote the knowledge potential is very essential to retain talent. Quality of talent in an organization has
a direct impact on its deliverables that will determine customer satisfaction and hence growth. Forward
looking organizations ensure that customer satisfaction and employee job satisfaction are maintained at
high levels.
Good job satisfaction levels reflect strongly in retention of skilled employees in any organization [1]. Such
employees being under-utilized due to projects getting delayed or cancelled poses a huge risk of
demotivation, heightens sense of insecurity and will have a spiraling impact on productivity. Talent &
functional managers need to actively engage with them and ensure their readiness for new challenges.
Learning needs are usually driven by: (i) company mandated, (ii) project needs, (iii) personal aspirations
of the individual employee. The organization’s learning channels & modes have to provide ample support
for the employees to accomplish their various learning needs in a timely manner.
4. 3
Concerns of Employees
1. How to keep up with latest technologies?
2. How to become a subject matter expert on specific technologies?
3. How to demonstrate that delivery quality is above expectations of the client?
4. How best to impress upon client / manager and improve selection opportunities to better
prospects (roles, perquisites, etc.)?
5. How to share knowledge with peers & subordinates and empower them to perform better & make
the team stronger?
Concerns of Managers
1. How to build a right-skilled team?
2. What new skills to be developed for new challenges, and by when?
3. How to keep team motivated through active learning?
4. How to ensure that learning is put into actual practice through innovative delivery?
Concerns of Organization
1. Are the projects progressing on the right track?
2. Is the client happy with the team’s capabilities, processes, and deliverables? Is the client
satisfaction score reflecting any concerns? If so, what is the remediation plan to mitigate those
concerns?
3. Is the employee satisfaction score reflecting on the good side? Are the concerns captured
appropriately and timely remediation plans being put in place?
4. How to ensure the appropriate learning opportunities are facilitated at different levels of people?
MANAGING TALENT
Talent management & retention is one of the primary focus areas consistently for any organization. Given
the challenge that the global economics influence the growth prospects, it is vital that the existing
employee pool is nurtured better while efforts to recruit new talent continue. One of the key aspects of
ensuring job satisfaction is based on the perception of what measures an organization is taking towards
employee’s growth [2].
Learning forms an integral element of talent management. Basis the level & role of a person and the
project needs, employees need to replenish their learning and hone their skills. Reputed employers
provide multiple avenues of learning – classroom, audio-video, conferences & workshops. Additionally,
custom trainings may be conducted on specific technologies basis project-specific-needs.
Given the nature of client that employees connect with and the frequency, it is important to cover
technical, communication, & managerial trainings – the percentage of each of them may vary basis the
employee’s maturity & experience. While some may be conducted in-house, others may depend on
external locations.
Structured trainings definitely have their inherent benefits basis the content and the trainer’s capability to
deliver. And, unstructured programs conducted efficiently could also be a good source of learning
resulting in positive outcomes. Some of the unstructured programs include:
5. 4
1. Mentoring interns/campus trainees [3]
2. Journal clubs
3. Orator clubs for extempore speeches, group discussions, debates
JOURNAL CLUBS
About Journal Club
Journal clubs have been a source of constant learning and knowledge sharing across different forums. It
is widely practiced in university research labs where the research & development work is volumetrically
more than in their industrial counter parts. This is an experience gained by the authors during their
research collaboration with universities [3].
Historically, there were mathematical circles in Russia. These circles worked on the principle that study of
mathematics can be as much fun and can generate equal levels of enthusiasm in participants as any
sports event [4]. This helped spread the concepts of mathematics while popularizing the subject as a
stream of learning amongst the masses. A non-traditional teaching methodology was adopted that
encouraged the participants to relate the mathematical principles to their daily life situations, thereby
helped ingrain these concepts easily. It has been observed that the journal clubs help the participants in
multitude of ways.
1. People learn new concepts and principles in an interactive environment. This mode of learning
has been proven to be far more effective than the formal channels of imparting instructions. For
example, when one person spends 2 hours to learn a subject and shares the learning in an hour
with the group consisting of 8 people, (s)he saves about 15 hours effort for everyone to grasp the
same concepts.
2. A group discussion about the concepts learnt from a literature leads to new paradigms of
comprehension or knowledge application. This is because each person has a unique model of
interpretation and knowledge retention. Besides people have unique ways to relate concepts with
their life’s situations.
3. Such a club and discussions allow people to express themselves with their understandings and
ideas. This helps participants to understand each other better and discover the individual and
group strengths.
4. The club serves as forum for people to present and obtain feedback in real-time. This helps
improve their communication and leadership skills which also adds to the intellectual capital of the
organization.
5. A highly charged group discussing on new concepts allows innovation to flow far quicker than it
can happen otherwise. Thus, it enriches the intellectual property of the organization in a cost
effective manner.
Thus, the tangible and intangible benefits of a journal club are far greater than perceived and
documented.
6. 5
Model
A journal club can be implemented in following ways: (i) passive model, and (ii) active model.
Passive Model
In this model, the presenter presents the concepts in a forum followed by questions and answers,
whereby all gain. Examples of such model are tech-symposiums and conferences in an organization.
Typically the number of participants is larger, playing a passive role by listening. It gives the presenter to
express his/her ideas more than anyone else. This forum supports people with varying degrees of skills to
attend and gain as per their capacity and ability. The topics of discussion and presentation is decided /
approved by an organizing group. The event is well planned and organized. These events also need
management approvals and funding.
Active Model
In an active model, the participants are less than or equal to 10. Such a group usually consists of similar-
skilled and like-minded people. The topics are chosen as per the group’s need & convenience. These
forums are much more participative in nature and the conducting of the session is charged with
discussions and debates. Such forums hardly need the management approval and its conduction relies
more on the employees’ time and less on any other resources.
In this work, the authors adapted a hybrid model, as shown in figure 1, combining the concepts from
passive and active, for implementation of the journal club in their organization. The senior members of the
team decided on the topics at large which are of interest to the organization in general and the group in
particular. The group then decided on the mechanism of exploration, selection and ownership of
presentation for each session. The group consisted of 8 people and the following roles were adopted.
1. Facilitator – a person responsible to conduct the sessions. The facilitator is responsible for all
activities related to the conducting of the meeting such as locating and deciding the place and
time, information sharing etc.
2. Presenter – one responsible for identifying a literature, study it and share the understanding.
3. Participants – listen to the presentation, discuss and debate the concepts and brainstorm on the
correlation of concepts to the organizational situations.
4. Scribe – is responsible to summarize the session, take notes of the proceedings and publish the
outcomes.
7. 6
Start
Team leader
identifies topics
Team Discussion
on topic &
content
Presenter(s)
Identification
Presenter(s) selects
the paper, studies &
prepares content
Presentation &
discussion
session
Scribe records
meeting
minutes
Innovative ideas
recorded on
forums
Business
proposals made
Ideas
implemented
ENDBenefit Records
Fig 1: Journal Club Workflow
Benefits
There are tangible & intangible benefits obtained by forming a journal club. These benefits are realized by
both the individual employees and the organization as depicted in figure 2.
Broadly, tangible benefits are realized as better innovations, improved intellectual capital, IP creations,
new business ideas, lesser attrition and reduced training costs. Intangible benefits reflect as improved
employee morale, greater zeal & enthusiasm, better productivity & commitment.
8. 7
Improved Employee
Morale
IntangibleTangible
Organization
Individual
Reduced Talent
Retention Effort
Empowered /
Charged Employees
Lower Attrition
Better
Intellectual Capital
Enhanced
IP Portfolio
Higher
Innovation Index
Lower Training
Costs Better Business
Solutions
Improved
Customer Satisfaction
Improved
Teamwork Interpersonal
Skills
Better
Communication
Ideas-To-Solutions
Higher Motivation
Satisfaction
Skill
Enhancement
Innovations
New Proposals /
Patents
Literature
Survey
Presentations
Collaborations
Fig 2: Benefits of Journal Clubs
The various beneficiaries are depicted in figure 3. While the direct beneficiaries are the participants
themselves, the relative outcomes benefit the organizational stakeholders. A successful program will
have multiple outcomes that may not just have recharged employees, but new ideas or innovations that
sprout may become value additions.
9. 8
Journal Club
Organization &
Management
Team Manager /
Facilitator
Participants – Team
Innovations Manager
Customer Account
Managers
HR / Training
Department
IP Committee
Quality Manager
Fig 3: Beneficiaries of Journal Clubs
CASE STUDY – Cognizant Technology Solutions (http://www.cognizant.com/)
Cognizant (Cognizant Technology Solutions) offers technology and transactional services to clients
across different domains and geographies. On the technology front there are many teams working on
delivering products & components with cutting edge technology. To keep the projects flowing into the
organization, the concerned teams strive to attain customer delight through delivery of services that
always exceeds the expectations of the customers. To attain this, the teams adopt the principles of a
learning organization. At Cognizant continuous efforts are being made that leads to skill up-gradation and
IP creation. Budgetary constraints and current market conditions pose a challenge to both the above
goals.
The authors have implemented the concepts presented in this paper at their department. The team
consisted of 8 high-skilled members most of whom had post-graduate or equivalent degree in
engineering. The members are from a research & development team focused on activities such as
creating high-end modules involving algorithms, natural language processing, data analytics, IP creation
by disclosing patents, write & publish papers, interact with universities for collaborative research. With
10. 9
market constraints appearing at beginning of 2012, project sponsor paid lesser attention to such activities
thus causing concern to the team. Some members contemplated quitting the organization as the support
for higher learning stopped and challenges diminished. The organization had offered cross-skilling the
members to take up delivery of application development projects which clearly were not to the members’
liking.
At this juncture, the authors, being senior members of the team, considered implementing the concept of
journal club as a mechanism of employee engagement. The concept was welcomed by the team. The
program started with one of the authors starting to deliver an introductory course on data mining which
was of interest to the team. The delivery of the sessions was as proposed in this paper. Besides, regular
weekly discussions were commenced for an hour each week where every member was encouraged to
play the role of presenter.
The following benefits were observed & quantified from the journal club program:
1. The team members started getting engaged with the program and the motivation for participation
started to rise. Individuals who were considering a departure from the organization, reconsidered
to stay back.
2. Innovative concepts worth of USD 20,000.
3. Emergence of 3 new ideas currently being considered to be disclosed for patent filing.
4. New system architecture that performs 3 times better on the same pre-existing infrastructure, for
a hosted service providing information extraction and parsing service on documents.
CONCLUSIONS
The paper presents the case study of conducting a journal club in their organizational premises and the
benefits derived through it. Some of these benefits have been measured and presented in this paper.
While a few of the intangible benefits have not been quantified, it is clear that such clubs lead to positive
short & long-term outcomes for the employers as well as employees. A more systematic and metric driven
study needs to be conducted to quantify such benefits.
REFERENCES
[1] T. Khamnayev, M R Alkhali, B Cockrell and B Haggerty, “Retention of high tech employees”, IEEE
PICMET 2001, Vol 1, DOI: 10.1109/PICMET.2001.952207.
[2] G Santhanam, R Jayaraman, and V Badrinath, “Influence of perceived job satisfaction and its impacts
on employee retention in Gulf Cooperation Countries”, ICMIEE Aug 2012.
[3] Salaka Sivananda, Vinaya Sathyanarayana and Peeta Basa Pati, "Industry-Academia Collaboration
via Internships," CSEET, pp.255-262, 2009 22nd Conference on Software Engineering Education and
Training, 2009.
[4] Dimitri Fomin, Sergey Genkin, Ilia Itenberg, “Mathematical Circles (Russian Experience)”, Universities
Press, 2000.
11. 10
AUTHOR(S) PROFILES
Peeta Basa Pati, PhD
Peeta Basa Pati has completed his Bachelor of Engineering from NIT Rourkela (fka NIT Rourkela) in
1998. He has completed his masters and PhD in engineering from Indian Institute of Science Bangalore
in the years 2001 and 2007, respectively. He has worked as research engineer with First Indian
Corporation, CoreLogic and now at Cognizant Technology Solutions. He has published 17 articles in
international journals & peer-reviewed conferences and holds a US patent. His research interests include
Information extraction, Image and pattern recognition, data analysis and mining. He currently is working
as a Senior Architect – Technology at Cognizant Technology Solutions.
S. Sivananda, PMP
®
, CSM
Sivananda has completed his Bachelor of Engineering from Bangalore University in 1997. He is a PMP in
good standing and Certified Scrum Master. His IT career spans more than 14 years in organizations such
as CyberCash, GE India Technology Center, CoreLogic (fka First Indian Corporation), and is currently
employed with Cognizant Technology Solutions as Associate Director – Projects. He is responsible for
teams conducting R&D, application development, testing, maintenance & support. Besides delivery
management, he promotes innovation and has published 1 paper in an international journal, presented in
project management summits at First Indian Corporation, and holds a US patent.