Past Experience
•Download as PPT, PDF•
0 likes•187 views
Shawn O'Callaghan has experience in engineering design and project management. He designed and installed control systems for brake testing at CSU and HVAC systems to ensure accurate readings. At Colorado RailCar, he created solutions to design problems and improved parts. As a designer at CBW Automation, he worked on mechanical subassemblies and modified parts from various materials to customize automation equipment.
Report
Share
Report
Share
![Overview Of Work Experience ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Million square foot building lutes aehs epa workshop ssda community leader-...
Practical case study of design and operations of a subslab depressurization system in a large commercial building. Poster presented at AEHS 23rd International Conference, San Diego 2013
Duct cfd newsletter
Storm Technologies provides engineering, fabrication, and field services related to combustion and airflow measurement and control for power boilers. They recently worked on a project replacing old primary air ductwork at a western plant, which involved 3D modeling, finite element analysis, computational fluid dynamics modeling, and fabrication of new ductwork sections. Storm has capabilities for engineering, fabrication, field testing, and technical services to help optimize boiler performance and combustion.
Quality Installation Check list
This document provides a checklist for evaluating HVAC installation contractors and proposals. It suggests rating contractors based on how closely their proposal follows quality installation elements. The checklist contains questions in areas like load calculation, equipment selection, installation measurements, and documentation. Contractors are scored based on the checklist. Their price is then divided by their score to determine the cost per point of quality. This allows homeowners to assess which contractor offers the best value for a high quality installation. The checklist is based on industry quality installation standards.
Owenton HSE Presentation Greenwood October 2011
The presentation summarized the HSE goals and sustainability initiatives at the Owenton facility. It reported that there was one accident in the first half of 2011. Annual planning requirements for the EHS and OHSMS systems were on track. Sub-metering projects for electricity, water, and gas were completed. The sustainability team achieved a 23% reduction in energy usage from 2010 to 2011 through HVAC replacements and identifying leaks. There were still some open items from the 2011 external audit to address.
HE-Design-Project-2016
The document describes a proposed heat exchanger design project to recover waste heat from laundry processes. Dirty wash water at 67°C is currently dumped, while clean water is heated to 70°C using an electric water heater. It is proposed to install a heat exchanger to preheat the water and reduce electricity costs. The heat exchanger design must be optimized to maximize annual savings over a 10-year period considering capital costs, operating costs, and a 10% interest rate. Several heat exchanger concepts will be analyzed and the optimal design selected.
Plant Performance Monitoring
This presentation contains an overview of tracking plant performance, with its application in two case studies, including gas compression train monitoring (Aspen) and production facility surveillance system (HYSYS).
Enhancing performance of transcritical CO2 heat pumps with heat recovery
Enhancing performance of transcritical CO2 heat pumps with heat recoveryATMOsphere Conferences & Events
The Alaska SeaLife Center uses four 20-ton trans-critical CO2 heat pumps for heating and cooling its 120,000 square foot aquarium facility. Since installing the heat pumps in 2016, they have achieved energy savings of $135,000 and reduced CO2 emissions by 1.3 million pounds. The heat pumps recover heat from seawater and use it to warm various building systems. Additional heat recovery from server rooms and other spaces has improved the system's efficiency since installation. Future plans include more heat recovery to further reduce energy costs and increase the heat pumps' coefficient of performance.Benzene Emissions - Staying in Compliance as Regulations Change
This presentation provides an overview of dehydration and refrigeration and lists regulations with current and upcoming changes. We also cover optimization of dehydration and refrigeration facilities and outline different technologies for benzene and GHG reduction.
Recommended
Million square foot building lutes aehs epa workshop ssda community leader-...
Practical case study of design and operations of a subslab depressurization system in a large commercial building. Poster presented at AEHS 23rd International Conference, San Diego 2013
Duct cfd newsletter
Storm Technologies provides engineering, fabrication, and field services related to combustion and airflow measurement and control for power boilers. They recently worked on a project replacing old primary air ductwork at a western plant, which involved 3D modeling, finite element analysis, computational fluid dynamics modeling, and fabrication of new ductwork sections. Storm has capabilities for engineering, fabrication, field testing, and technical services to help optimize boiler performance and combustion.
Quality Installation Check list
This document provides a checklist for evaluating HVAC installation contractors and proposals. It suggests rating contractors based on how closely their proposal follows quality installation elements. The checklist contains questions in areas like load calculation, equipment selection, installation measurements, and documentation. Contractors are scored based on the checklist. Their price is then divided by their score to determine the cost per point of quality. This allows homeowners to assess which contractor offers the best value for a high quality installation. The checklist is based on industry quality installation standards.
Owenton HSE Presentation Greenwood October 2011
The presentation summarized the HSE goals and sustainability initiatives at the Owenton facility. It reported that there was one accident in the first half of 2011. Annual planning requirements for the EHS and OHSMS systems were on track. Sub-metering projects for electricity, water, and gas were completed. The sustainability team achieved a 23% reduction in energy usage from 2010 to 2011 through HVAC replacements and identifying leaks. There were still some open items from the 2011 external audit to address.
HE-Design-Project-2016
The document describes a proposed heat exchanger design project to recover waste heat from laundry processes. Dirty wash water at 67°C is currently dumped, while clean water is heated to 70°C using an electric water heater. It is proposed to install a heat exchanger to preheat the water and reduce electricity costs. The heat exchanger design must be optimized to maximize annual savings over a 10-year period considering capital costs, operating costs, and a 10% interest rate. Several heat exchanger concepts will be analyzed and the optimal design selected.
Plant Performance Monitoring
This presentation contains an overview of tracking plant performance, with its application in two case studies, including gas compression train monitoring (Aspen) and production facility surveillance system (HYSYS).
Enhancing performance of transcritical CO2 heat pumps with heat recovery
Enhancing performance of transcritical CO2 heat pumps with heat recoveryATMOsphere Conferences & Events
The Alaska SeaLife Center uses four 20-ton trans-critical CO2 heat pumps for heating and cooling its 120,000 square foot aquarium facility. Since installing the heat pumps in 2016, they have achieved energy savings of $135,000 and reduced CO2 emissions by 1.3 million pounds. The heat pumps recover heat from seawater and use it to warm various building systems. Additional heat recovery from server rooms and other spaces has improved the system's efficiency since installation. Future plans include more heat recovery to further reduce energy costs and increase the heat pumps' coefficient of performance.Benzene Emissions - Staying in Compliance as Regulations Change
This presentation provides an overview of dehydration and refrigeration and lists regulations with current and upcoming changes. We also cover optimization of dehydration and refrigeration facilities and outline different technologies for benzene and GHG reduction.
Appsolu
The document summarizes various projects completed by a thermal power plant consulting firm, including: 1) resolving coal feeding issues that caused abnormal pressure readings at a 20MWe plant; 2) coordinating the dismantling and relocation of equipment from a 90MWe plant in Texas to Chile; 3) performing reverse engineering to support the removal of a 1950s-era 10MWe steam turbine generator set. The document also describes projects involving: emission controls, heat exchangers, process/control systems, and cogeneration systems.
Advantages of small diameter tubes in transcritical refrigeration cycles
Advantages of small diameter tubes in transcritical refrigeration cyclesATMOsphere Conferences & Events
The document discusses the advantages of using smaller diameter copper tubes in gas coolers for transcritical CO2 refrigeration systems. Using 5mm tubes instead of standard 9.53mm or 8mm tubes can reduce the gas cooler's weight by 45% and internal volume by 70%, while maintaining similar capacity. A copper-iron alloy that maintains high pressure ratings up to 1740 psi across all tube sizes is also presented as an option for high pressure transmission lines.The Energy Network: Energy Upgrade California Home Upgrade
Improve your comfort and indoor air quality by performing a whole house energy efficiency home upgrade. Offered by The Energy Network, Energy Upgrade California Home Upgrade provides up to $3,000 in rebates and incentives for performing qualifying energy efficiency upgrades.
RETICOM SOLUTION: Power plants and steam generators
RETICOM SOLUTION provides a vast range of engineering services for design and performance estimation of power plants and steam generators as well as failure diagnosis services.
Cooling tower Inspection Guide
Your complete guide to cooling tower inspections so that you may have a deeper understanding of why inspections are so important. This step by step guide will reveal the process of what happens when a cooling tower inspection is completed, and what to expect afterwards.
SEAI - Non Domestic Webinar #1 Domestic Hot Water Systems in NEAP
The objective of this webinar was to provide the assessor with the knowledge on how to identify a hot water system and input into iSBEMie correctly.
Other items covered included, how to establish the required efficiency data, the assigned storage aspects, individual or bi-valent systems and how to apply it to zones.
Energy efficient for part 9 buildings and city bylaws
The document discusses the BC Building Code 2012 and ASHRAE 90.1-2010 energy standards. It provides an introduction to the presenter and their qualifications. It then outlines the key compliance approaches and mandatory provisions for building envelopes in both codes, including requirements for insulation, air barriers, fenestration, skylights and fenestration orientation. Prescriptive requirements are discussed for opaque elements, below-grade walls, slab-on-grade floors and fenestration.
BER Non-Domestic Webinar #2 -Checking your work
Useful reminders on SBEM and NEAP Rules, advising assessors how to check their work, also covering some common mistakes seen by auditors.
DEAP Heat Pump Webinar 2
This document summarizes a heat pump webinar that covered three topics:
1. Acceptable evidence for non-default heat pump efficiency data in DEAP, which must include the heat pump model, reference to relevant regulations, and efficiency data.
2. Heat pump installation considerations like building insulation, emitters, hot water tanks, and defrost cycles.
3. Heat pump controls including weather compensation, different control types, and entering controls data into DEAP.
Energy step code
Energy Step Code start effective in April 2017. This presentation presents everything about BC Energy Step Code
Performance and Optimization of Residential Condensing Combi Systems
Performance and Optimization of Residential Condensing Combi SystemsCenter for Energy and Environment
Homeowners with natural gas water heaters have difficulty justifying the expense of a more efficient condensing heater. Combination space and domestic hot water systems bundle together the two loads, which saves energy and makes them more cost-effective. These systems also help eliminate combustion safety concerns.
Historically, mechanical contractors have custom engineered and pieced together combi systems in the field, paying little attention to efficiency and optimization. But condensing heating plants will only reach their energy saving potential when all components are designed and installed correctly.IRJET- CFD Analysis of Double Pipe Heat Exchanger with Different Inner Se...
This document analyzes the heat transfer performance of a double pipe heat exchanger with circular and square inner sections using computational fluid dynamics (CFD). CFD simulations were conducted using ANSYS Fluent to analyze temperature contours and heat transfer rates. The results showed that the square inner section heat exchanger absorbed more heat from the hot fluid and had a higher heat flow rate than the circular section design, with the cold fluid outlet temperature being higher for the square section. In conclusion, the square inner section design exhibited better heat transfer performance compared to the conventional circular section design for this type of heat exchanger.
Warmer Homes Scheme - TGD L Major Renovation Requirements
Warner Homes is running an online event to provide a refresher to contractor QA on where Major Renovation applies and how it is measured in the context of TGD Part L.
We will address key insights around quality, and will examine in detail what is the source of high numbers of fails in a selected measure. In this session, we are reviewing common fails for external wall insulation.
Compress heat exchanger design w notes
This presentation is to show how to design heat exchanger from process simulation data to complete mechanical design by using two software HTRI and COMPRESS in seamless streamline Auto duping data.
Michael brogden darren evans lcbb 160517 performance versus regulation
Presentation from Michael Brogden of Darren Evans Assessments Ltd at the May 2017 Go Green & Low Carbon Business Breakfast
Shannon Lovett, Emerson Climate Technologies
At the technology round table strategic presentations on Commercial Refrigeration will be presented by leading industry representatives, followed by a panel discussion.
Slurry Transport Analysis Presentation
Slurry transport is still as much a black art as it is a science. The analysis tools used by Solid Advantage Consultants combines the latest science with empirical knowledge both from work done by others and from Solid Advantage's experience.
This presentation displays the analysis process and the breadth of tools used to analyze slurry gravity flow and pumping systems.
Please feel free to contact me regarding any questions you may have with the presentation or the methods used.
arthur stack
HVAC Air Balance 101
This document discusses the importance of proper air balancing in buildings and facilities. It begins with defining building pressure and listing symptoms of negative pressure. Unbalanced facilities can cost thousands per year in unnecessary energy expenses. Common causes of imbalance are equipment issues and poor maintenance. Regular air balancing checks the HVAC system's performance and ensures positive pressure and proper airflow. Facility managers should schedule balancing to improve comfort, efficiency and equipment lifespan. A case study shows how balancing found many issues across 4 locations.
Building_Envelope_Services[1]
This document summarizes the building envelope services provided by Garland Industries, which include assessing the current condition of building envelope components like the roof, walls, windows and doors. It also includes an energy audit to determine potential energy savings from improvements and a life-cycle cost analysis. Additionally, an environmental risk assessment is conducted to check for issues like air quality, hazardous materials or life safety concerns.
Testing, Adjusting, and Balancing of all HVAC Systems
The purpose of testing, adjusting, and balancing (TAB) is to assure that an HVAC system is providing maximum occupant comfort at the lowest energy cost possible.
What Every Ceo Needs To Know 11 08
This document summarizes key points from a fundraising workshop for nonprofit CEOs. It discusses:
1) The strategic role of fundraising in generating funds, demonstrating support, and ensuring sustainability. Fundraising is crucial at different stages of organizational development.
2) The main sources of philanthropic funds which come from institutions and individuals globally. Individual giving makes up the majority.
3) Why donors give, which includes believing in the cause, making a difference, spiritual fulfillment, and appreciation for being recognized. When donors don't feel appreciated or informed, attrition increases over time.
SEO for CMS Percussion with Guava
Teddie Cowell, Search Director at Guava presents how to ensure your CMS is effectively optimised for search engines. Percussion is a leading Content Management Solution.
More Related Content
What's hot
Appsolu
The document summarizes various projects completed by a thermal power plant consulting firm, including: 1) resolving coal feeding issues that caused abnormal pressure readings at a 20MWe plant; 2) coordinating the dismantling and relocation of equipment from a 90MWe plant in Texas to Chile; 3) performing reverse engineering to support the removal of a 1950s-era 10MWe steam turbine generator set. The document also describes projects involving: emission controls, heat exchangers, process/control systems, and cogeneration systems.
Advantages of small diameter tubes in transcritical refrigeration cycles
Advantages of small diameter tubes in transcritical refrigeration cyclesATMOsphere Conferences & Events
The document discusses the advantages of using smaller diameter copper tubes in gas coolers for transcritical CO2 refrigeration systems. Using 5mm tubes instead of standard 9.53mm or 8mm tubes can reduce the gas cooler's weight by 45% and internal volume by 70%, while maintaining similar capacity. A copper-iron alloy that maintains high pressure ratings up to 1740 psi across all tube sizes is also presented as an option for high pressure transmission lines.The Energy Network: Energy Upgrade California Home Upgrade
Improve your comfort and indoor air quality by performing a whole house energy efficiency home upgrade. Offered by The Energy Network, Energy Upgrade California Home Upgrade provides up to $3,000 in rebates and incentives for performing qualifying energy efficiency upgrades.
RETICOM SOLUTION: Power plants and steam generators
RETICOM SOLUTION provides a vast range of engineering services for design and performance estimation of power plants and steam generators as well as failure diagnosis services.
Cooling tower Inspection Guide
Your complete guide to cooling tower inspections so that you may have a deeper understanding of why inspections are so important. This step by step guide will reveal the process of what happens when a cooling tower inspection is completed, and what to expect afterwards.
SEAI - Non Domestic Webinar #1 Domestic Hot Water Systems in NEAP
The objective of this webinar was to provide the assessor with the knowledge on how to identify a hot water system and input into iSBEMie correctly.
Other items covered included, how to establish the required efficiency data, the assigned storage aspects, individual or bi-valent systems and how to apply it to zones.
Energy efficient for part 9 buildings and city bylaws
The document discusses the BC Building Code 2012 and ASHRAE 90.1-2010 energy standards. It provides an introduction to the presenter and their qualifications. It then outlines the key compliance approaches and mandatory provisions for building envelopes in both codes, including requirements for insulation, air barriers, fenestration, skylights and fenestration orientation. Prescriptive requirements are discussed for opaque elements, below-grade walls, slab-on-grade floors and fenestration.
BER Non-Domestic Webinar #2 -Checking your work
Useful reminders on SBEM and NEAP Rules, advising assessors how to check their work, also covering some common mistakes seen by auditors.
DEAP Heat Pump Webinar 2
This document summarizes a heat pump webinar that covered three topics:
1. Acceptable evidence for non-default heat pump efficiency data in DEAP, which must include the heat pump model, reference to relevant regulations, and efficiency data.
2. Heat pump installation considerations like building insulation, emitters, hot water tanks, and defrost cycles.
3. Heat pump controls including weather compensation, different control types, and entering controls data into DEAP.
Energy step code
Energy Step Code start effective in April 2017. This presentation presents everything about BC Energy Step Code
Performance and Optimization of Residential Condensing Combi Systems
Performance and Optimization of Residential Condensing Combi SystemsCenter for Energy and Environment
Homeowners with natural gas water heaters have difficulty justifying the expense of a more efficient condensing heater. Combination space and domestic hot water systems bundle together the two loads, which saves energy and makes them more cost-effective. These systems also help eliminate combustion safety concerns.
Historically, mechanical contractors have custom engineered and pieced together combi systems in the field, paying little attention to efficiency and optimization. But condensing heating plants will only reach their energy saving potential when all components are designed and installed correctly.IRJET- CFD Analysis of Double Pipe Heat Exchanger with Different Inner Se...
This document analyzes the heat transfer performance of a double pipe heat exchanger with circular and square inner sections using computational fluid dynamics (CFD). CFD simulations were conducted using ANSYS Fluent to analyze temperature contours and heat transfer rates. The results showed that the square inner section heat exchanger absorbed more heat from the hot fluid and had a higher heat flow rate than the circular section design, with the cold fluid outlet temperature being higher for the square section. In conclusion, the square inner section design exhibited better heat transfer performance compared to the conventional circular section design for this type of heat exchanger.
Warmer Homes Scheme - TGD L Major Renovation Requirements
Warner Homes is running an online event to provide a refresher to contractor QA on where Major Renovation applies and how it is measured in the context of TGD Part L.
We will address key insights around quality, and will examine in detail what is the source of high numbers of fails in a selected measure. In this session, we are reviewing common fails for external wall insulation.
Compress heat exchanger design w notes
This presentation is to show how to design heat exchanger from process simulation data to complete mechanical design by using two software HTRI and COMPRESS in seamless streamline Auto duping data.
Michael brogden darren evans lcbb 160517 performance versus regulation
Presentation from Michael Brogden of Darren Evans Assessments Ltd at the May 2017 Go Green & Low Carbon Business Breakfast
Shannon Lovett, Emerson Climate Technologies
At the technology round table strategic presentations on Commercial Refrigeration will be presented by leading industry representatives, followed by a panel discussion.
Slurry Transport Analysis Presentation
Slurry transport is still as much a black art as it is a science. The analysis tools used by Solid Advantage Consultants combines the latest science with empirical knowledge both from work done by others and from Solid Advantage's experience.
This presentation displays the analysis process and the breadth of tools used to analyze slurry gravity flow and pumping systems.
Please feel free to contact me regarding any questions you may have with the presentation or the methods used.
arthur stack
HVAC Air Balance 101
This document discusses the importance of proper air balancing in buildings and facilities. It begins with defining building pressure and listing symptoms of negative pressure. Unbalanced facilities can cost thousands per year in unnecessary energy expenses. Common causes of imbalance are equipment issues and poor maintenance. Regular air balancing checks the HVAC system's performance and ensures positive pressure and proper airflow. Facility managers should schedule balancing to improve comfort, efficiency and equipment lifespan. A case study shows how balancing found many issues across 4 locations.
Building_Envelope_Services[1]
This document summarizes the building envelope services provided by Garland Industries, which include assessing the current condition of building envelope components like the roof, walls, windows and doors. It also includes an energy audit to determine potential energy savings from improvements and a life-cycle cost analysis. Additionally, an environmental risk assessment is conducted to check for issues like air quality, hazardous materials or life safety concerns.
Testing, Adjusting, and Balancing of all HVAC Systems
The purpose of testing, adjusting, and balancing (TAB) is to assure that an HVAC system is providing maximum occupant comfort at the lowest energy cost possible.
What's hot (20)
Advantages of small diameter tubes in transcritical refrigeration cycles
Advantages of small diameter tubes in transcritical refrigeration cycles
The Energy Network: Energy Upgrade California Home Upgrade
The Energy Network: Energy Upgrade California Home Upgrade
RETICOM SOLUTION: Power plants and steam generators
RETICOM SOLUTION: Power plants and steam generators
SEAI - Non Domestic Webinar #1 Domestic Hot Water Systems in NEAP
SEAI - Non Domestic Webinar #1 Domestic Hot Water Systems in NEAP
Energy efficient for part 9 buildings and city bylaws
Energy efficient for part 9 buildings and city bylaws
Performance and Optimization of Residential Condensing Combi Systems
Performance and Optimization of Residential Condensing Combi Systems
IRJET- CFD Analysis of Double Pipe Heat Exchanger with Different Inner Se...
IRJET- CFD Analysis of Double Pipe Heat Exchanger with Different Inner Se...
Warmer Homes Scheme - TGD L Major Renovation Requirements
Warmer Homes Scheme - TGD L Major Renovation Requirements
Michael brogden darren evans lcbb 160517 performance versus regulation
Michael brogden darren evans lcbb 160517 performance versus regulation
Testing, Adjusting, and Balancing of all HVAC Systems
Testing, Adjusting, and Balancing of all HVAC Systems
Viewers also liked
What Every Ceo Needs To Know 11 08
This document summarizes key points from a fundraising workshop for nonprofit CEOs. It discusses:
1) The strategic role of fundraising in generating funds, demonstrating support, and ensuring sustainability. Fundraising is crucial at different stages of organizational development.
2) The main sources of philanthropic funds which come from institutions and individuals globally. Individual giving makes up the majority.
3) Why donors give, which includes believing in the cause, making a difference, spiritual fulfillment, and appreciation for being recognized. When donors don't feel appreciated or informed, attrition increases over time.
SEO for CMS Percussion with Guava
Teddie Cowell, Search Director at Guava presents how to ensure your CMS is effectively optimised for search engines. Percussion is a leading Content Management Solution.
Finding and posting content on social media
The document discusses how to effectively find and post content on social media. It recommends using tools like Buffer and DrumUp to save time when scheduling posts. Buffer allows scheduling posts across multiple social media platforms. DrumUp sources content based on keywords and lets the user bulk schedule posts. The document stresses that social media marketing requires consistency over time rather than focusing on quick wins.
Search Engine Optimisation
There are different types of search engines including crawler-based engines, directories, hybrid engines, meta search engines, and paid inclusion engines. Crawler-based engines use robots to index webpages and rank them based on relevance to search queries. Directories require human editors to review and include websites. Key on-page SEO techniques include optimizing title tags, H1-H2-H3 tags, alt text, internal linking, and keyword usage in content and titles. Both on-page and off-page factors like backlinks, site age, and topic relevance affect search engine rankings.
Search engine
A search engine crawls websites to build an index of web pages, then uses algorithms to rank pages for relevant search results. Meta search engines submit queries to multiple other search engines and aggregate the results into a single summary. Registration involves providing basic site details to be included in a search engine's index. Key factors in rankings include meta titles, keywords, and incoming links. Search engines regularly update their algorithms and indexes.
Search engines
This document provides an overview of search engines. It begins with an acknowledgement and then discusses what search engines are, their importance, and different types including crawler-based, directories, hybrid, and meta search engines. Examples are provided of popular search engines like Google and Yahoo. The document concludes with tips on how to effectively use search engines by leveraging operators like plus, minus, quotes, and OR.
Search Engine Powerpoint
The document discusses different types of search engines. It describes search engines as programs that use keywords to search websites and return relevant results. It provides examples of popular search engines like Google, Yahoo, and Ask.com. It also explains different types of search engines such as crawler-based, directory-based, specialty, hybrid, and meta search engines. Finally, it discusses how to effectively use search engines through techniques like being specific, using symbols like + and -, and using Boolean searches.
Viewers also liked (7)
Similar to Past Experience
Ek portfolio.2
Erik Ko has experience designing and testing various underwater equipment including a 10Kpsi pressure tank, grounding methods for electronic housings, pressure compensation systems, calibration facilities, linear actuator systems, carriages, centralizers, locking mechanisms, and LabVIEW user interfaces. He has also conducted E-chassis shock testing and analysis.
Czero Engineering - Feb 2017
Czero is an engineering services company specializing in mechanical design and prototyping for early stage R&D projects. They have expertise in areas such as engines, hydraulics, and energy systems. Some of their recent projects include designing a natural gas generator system for a locomotive, CO2-based cleaning machines, and a subsea hydraulic pump assembly. Czero takes projects from concept through detailed design, analysis, prototyping, and testing using virtual engineering methods to provide quick iterations to clients.
GLM-introduction and approach
The document provides information about an engineering department, including the manager, design engineers, drafting staff, and document control clerks. It details the department's certifications to work on pressure vessels and piping. It outlines the department's values, capabilities, tools used for design including modeling software, and provides examples of projects involving tank design and lifting. The department is prepared to perform quality work, meet deadlines, and is looking to work with new clients.
Final Presentation Slides - 2nd Rotation
Justin Sly presented on his 2nd co-op rotation working on 24 different applications. These included developing a custom hydraulic valve option to control platform tilt, insourcing the manufacturing of track parts to save time and money which involved creating dozens of drawings and assemblies, creating support brackets and gussets for modified outriggers, updating over 1,000 part numbers to comply with new ANSI standards, and writing work instructions for processing in-plant revisions. He enjoyed the design freedom and seeing the final results but wished for more hands-on work. He learned SolidWorks, AutoCAD, and about manufacturing and design processes during his rotation.
Analyzer CAE Capabilities
This document provides an overview of the CFD and FEA capabilities of Analyzer CAE Solutions Pvt. Ltd. It describes their expertise in various domains including automotive, turbomachinery, process industry, electronics cooling, and more. Their services include CFD simulations of fluid flow, heat transfer, combustion, and other multi-physics problems. They also offer FEA model creation and structural analysis of components like pressure vessels, heat exchangers, frames, and shelters. Major clients of Analyzer CAE Solutions include Larsen & Toubro, Ashok Leyland, BHEL, Cummins, and ThyssenKrupp.
What Constittutes a Cuality Commissioning job
This document provides an overview of commissioning services for a construction project. It discusses the importance of being involved early in the pre-construction phase to help define the owner's requirements. It also outlines the commissioning process, including conducting design reviews, developing checklists and test procedures, overseeing construction installation, performing functional testing, and providing owner training and documentation. The document emphasizes the importance of thorough documentation throughout the construction and acceptance phases to ensure all systems meet the specified requirements.
OTC2011
The document outlines various SolidWorks simulation examples for analyzing components used in oil and gas applications. It describes structural, vibration and buckling analyses of skid platforms and weldments. Additional examples include pressure vessel design ensuring ASME code compliance, earthquake simulation, umbilical strength analysis, and manhole nozzle flange design. Flow simulations are shown for propane through a valve, air through a manifold system, and around a drill bit. HVAC analyses include airflow optimization and modeling advanced radiation transfer.
Engineering & Design of Pipe Supports
This presentation will cover pipe support design, 3D modeling, Finite Element Analysis, special stress and thermal cases, along with the unique cases that brought on new pipe support designs. Increase your understanding of the value-added services that are offered by PT&P.
O & C Refurb
The document provides an overview of various projects, trade studies, optimizations, and challenges during the construction and renovation of the Operations and Checkout Building Low Bay area at Kennedy Space Center to create the Orion Integration Facility. It describes the demolition and construction work, decisions made to reduce costs and risks, and issues that arose and how they were addressed, with the overall goal of completing the project on schedule and within budget to support Orion vehicle manufacturing and testing.
Stress Analysis in District Cooling Projects
DCPRO Engineering Presentation at CAU 2017 in Dubai - Piping Stress Analysis in District cooling Domain
jermaine_brown resume 2016 updated
This document is a resume for Jermaine Brown, a Senior Manufacturing Engineer with experience in lean manufacturing, HVAC, and antenna manufacturing. He has a B.A. in Mechanical Engineering Technology and an M.B.A. in Business Administration. His experience includes roles as a Manufacturing Engineer, Designer, and Assistant Manager where he focused on process improvement, quality assurance, and production support.
Resume01
This document is a resume for Deepak Maru summarizing his professional experience and qualifications. It outlines over 20 years of experience in the aerospace and oil/gas industries, including expertise in project management, hydraulic systems design, and aircraft structures. Recent roles included senior mechanical engineering positions at several companies involving design of aircraft systems, hydraulic components, and MRI machines using CAD software like CATIA and Creo.
Computational Fluid Dynamics (CFD) Modelling for Designing & Troubleshooting ...
Computational Fluid Dynamics (CFD) Modelling for Designing & Troubleshooting ...Chandra Prakash Lohia
Fired heaters and its auxiliaries are an essential component in the Chemical Process Industries (CPI). Fired heaters are primarily used to heat hydrocarbons. They are one of the major consumers of energy and hence, it is indispensable for such systems to have efficient operation.
Furnace Improvements Services has a specialist CFD team for modelling fired heater systems. We have developed best practices for each of the above cases and have successfully implemented various recommendations from CFD simulations.Computational Fluid Dynamics (CFD) Modelling for Designing & Troubleshooting ...
Fired heaters and its auxiliaries are an essential component in the Chemical Process Industries (CPI). Fired heaters are primarily used to heat hydrocarbons. They are one of the major consumers of energy and hence, it is indispensable for such systems to have efficient operation.
Furnace Improvements Services has a specialist CFD team for modelling fired heater systems. We have developed best practices for each of the above cases and have successfully implemented various recommendations from CFD simulations.
Kyle Estenger Resume 4-11-2016
This document is a resume for Kyle Estenger, who is seeking a mechanical engineering position. He has a Bachelor of Science in Mechanical Engineering from UC Santa Barbara with a 3.43 GPA. He has relevant internship experience in manufacturing engineering and has skills in CAD, CAM, programming, welding, and composites. His academic projects include designing a foldable surfboard fin and working on a CubeSat solar array. He has also completed several hands-on personal projects.
Summer Internship Presentation
The document summarizes the key activities and projects of an internship at ARCADIS, a global infrastructure consultancy firm. The intern participated in internal trainings, worked on chiller replacement projects at commercial buildings, and assisted with the procurement of anti-ram bollards for a building security upgrade. Some of the main tasks included inspecting installation works, testing and commissioning replacement chillers, and measuring energy savings to verify project outcomes.
Air Flow Test Bench A Senior Capstone Project
This document describes a senior capstone project undertaken by mechanical engineering students at Western Kentucky University to design, build, and test an air flow test bench. The test bench was designed to measure airflow resistance of test specimens and performance of air moving devices over a flow range of 10-2000 CFM. It included major components like a variable speed blower, nozzle flow measurement device, housing plenum, flow straighteners, and data acquisition system. The project was funded by ASHRAE and followed standards to characterize performance of air devices and pressure drops for educational use in future mechanical engineering labs.
Case Study: Resin Reactor Vent Analysis
Flex Process carried out a detailed study of an existing relief system for handling a runaway phenolic resin reaction. Using in-house software, we were able to identify the required size of the vents, and ensure that the new design was up to scratch.
HVAC Design Course Content For Regular & Weekend Batch
MECCI Engineers Private Limited provides HVAC Design Engineering Course, HVAC Design and Operation Training, Industrial Training in HVAC Design for Mechanical Engineers, HVAC Design & Drafting Training, HVAC Design Training Programs, etc. For details, visit; http://www.mecciengineer.com/hvac-design.aspx
Senior Design Project
The CPC team designed a compound parabolic concentrator (CPC) system to provide auxiliary home heating. The CPC will collect solar radiation and heat a water-ethylene glycol solution, which will be transported via piping to an indoor radiator for heat release. The CPC will interface with a mechanical solar tracking system to improve efficiency over a stationary mount. The CPC design incorporates four connected CPC sections, with absorbers and ducts to transfer heated fluid from the concentrator to the piping system. Analyses were performed to determine the CPC geometry, fluid selection, piping design, and necessary concentrator footprint to provide the desired 250W of heat output.
Similar to Past Experience (20)
Computational Fluid Dynamics (CFD) Modelling for Designing & Troubleshooting ...
Computational Fluid Dynamics (CFD) Modelling for Designing & Troubleshooting ...
Computational Fluid Dynamics (CFD) Modelling for Designing & Troubleshooting ...
Computational Fluid Dynamics (CFD) Modelling for Designing & Troubleshooting ...
HVAC Design Course Content For Regular & Weekend Batch
HVAC Design Course Content For Regular & Weekend Batch
Past Experience
- 1. Shawn O’Callaghan Engineering Experience
- 7. Timeline