The document describes the turbines and thermal power plant at Pakistan Steel Mills. It states that the boiler at the plant can generate 220 tons of steam per hour at a pressure of 115kgf/cm^2 and a superheated steam temperature of 540 degrees. The thermal power plant has 3 turbines with a rated power output of 55MW each that use steam from the boiler. The turbines have extraction points and operate at speeds of 3000rpm and a frequency of 50Hz using steam that is 525-540 degrees C and at a pressure of 85-95 kgf/cm^2.

1. Turbines(Generation)
Capacity =220Tons/hr
Pressure =115kgf/cm^2
Super-heatedSteamTemp.=540
FeedWaterTemperature=215
TotalHeatingSurfaceArea=19393m^2
FeedWaterPressure =160kgf/cm^2
Description SteamPath
TheBoilerusedinPakistanSteelMillsismadebyTaganrog
Works(Russian)watertubeboilerwhichproducessuperheated
steam.SteelMillshave4identicalboilersinTPP(Thermal
PowerPlant).
Specificationsofboilerare:
TheSteamfromtheboilerfirstgoestotheTPP(ThermalPowerPlant)which
has3turbineshavingratedpowerof55Mw.
Specificationsoftheseturbinesare:
-Twoextractionpointsat10-16ataand1.5to3ata
-Ratedoutput55Mw
-Speed3000rpm
-Frequency50Hz
-SteamPressure=85–95Kg/cm2
-SteamTemperature=525–540C
-Coolingwaterflowrate(throughCondenser)=8000m3/hr-Coolingwaterflowrate(throughCondenser)=8000m3/hr
-Coolingwaterinlettemperature=28C
-Maxsteamflowatnominalconditions=402ton/hr
PAKISTANSTEELMILLSTHERMALPOWERPLANT
GroupMembers
1MuhammadHasanME-108
2DanialSohailME-089
3OwaisAli ME-105
4SyedOsaidHaqME-102
5SyedWajahatHasan ME-075
6MuhammadRafayMustafaME-124
7DaniyalIqbalME-103
8MuhammadWaleedAhmed ME-071
9SyedWajahatMubarak ME-106
10 RafayKhokarME-073
11TalhaFareed ME-072