1. Chief Engineer Electrical
Responsibilities
• You can translate in an effective and efficient manner the wishes of the
customer in clear technical analyses and design
• You can make transparent design recommendations and where necessary
development recommendations
• Your knowledge and experience is of added value and you are able to
translate technical possibilities in innovative ideas and/or products
• you will be responsible for the design of new concept wind turbines at multi-
MW ratings
Requirements
• You have a superb ability to express in an orally and written way
• You know the customer and anticipate on the wishes and needs of the
customer, identify deviations and you are part of the project management team
• BEng, BSc, or BS in Electrical Engineering is required; advanced degree
preferred.
• 5 to 7 years of relevant engineering and electrical system design experience is
required
• Strong understanding of wind turbine technology, as well as a thorough
understanding of Wind Turbine IEC 61400-xx Standards and Certification is
preferred.
Profile
• You know the different phases of the developing and design process and you
are skilled in reporting and commenting your analyses
• Moreover you are an independent, analytical and creative go-getter and a
team player
• You have good knowledge of the languages relevant for MECAL, particularly
English and German
MECAL offers
• An attractive salary
• Good balance between work and leisure
• An open, efficient and pleasant work environment
• Good developmental and educational opportunities
• Good primary and secondary benefits

2. Information application
For more information you can e-mail Ron Kammeijer (Business Unit Manager) or
contact him at +31 53 4821 481. Check also the section wind energy on the website.
You can send your application and resume to hrd@mecal.eu , Attn: Mr. Dick van
Haare.

3. Control Engineer
Responsibilities
• Design MMW wind turbine controllers.
• Optimization of MMW wind turbine controllers.
• Design and implementation of controller alarm and warning systems.
• Design of advanced control algorithms for load reduction and/or performance
enhancement.
Requirements
• Educational requirement is an engineering degree (B.Sc or B.Sc.).
• You have good knowledge of the languages relevant for MECAL, particularly
English.
• Knowledge and experience of C, C+ and similar software.
• Knowledge and experience with Matlab Simulink and code integration in
embedded systems.
• Knowledge and experience with use and implementation of sensors & PLC
systems.
Profile
• Knowledge of the wind energy industry is an advantage.
• You convincingly present your results and clarify your work.
• You can document the work you performed.
• You feel well at home in a team, know the different phases of a project and
can adapt to these phases, but you are also able to perform independently.
MECAL offers
• An attractive salary.
• Good balance between work and leisure.
• An open, efficient and pleasant work environment.
• Good developmental and educational opportunities.
• Good primary and secondary benefits.
Information application
For more information you can e-mail Ron Kammeijer (Business Unit Manager) or
contact him at +31 53 4821 481. Check also the section wind energy on the website.
You can send your application and resume to hrd@mecal.eu , Attn: Mr. Dick van
Haare.

4. Electrical Engineer
Responsibilities
• You will be responsible for the design and development of the entire low
voltage electrical system including grid connection, generator and power
system.
Requirements
• Educational requirement is an engineering degree (M.Sc).
• You have good knowledge of and experience with the use of Ansys.
Profile
• Significant experience as an Electrical Engineer in a turbine design
environment.
• Must be conversant with relevant standards and design methodologies for
wind turbine LV/MV power systems and generators.
• Experience with software tools; IPSA, PSS/e, Matlab preferred.
• You convincingly present your results and clarify your work.
• You feel well at home in a team, know the different phases of a project and
can adapt to these phases, but are also able to perform independently.
MECAL offers
• An attractive salary.
• Good balance between work and leisure.
• An open, efficient and pleasant work environment.
• Good developmental and educational opportunities.
• Good primary and secondary benefits
Information application
For more information you can e-mail Ron Kammeijer (Business Unit Manager) or
contact him at +31 53 4821 481. Check also the section wind energy on the website.
You can send your application and resume to hrd@mecal.eu , Attn: Mr. Dick van
Haare.

5. Wind Turbine Inspector
Responsibilities
• Carry out independent inspections/assessments of wind farms
• Conduct video-endoscopic gearbox inspections
• Perform audits or inspections of manufacturing facilities
• Discuss inspections and progress with customers
• Coordinate own activities and, if applicable, coordinate activities of colleague-field engineers (e.g.
sub-contractors)
• Report the inspection results to the customer by writing brief and clear reports (mainly in English)
• Provide suitable solutions in unexpected situations as well as recognizing possible additional
customer needs
• Recognize possibilities for technical improvement of a wind turbine and confer this with the
colleague project-engineers
• Working in accordance with Health and Safety policies
Requirements
• Secondary vocational education (MBO in Dutch) combined with 3-5 years work experience in
Wind Energy or a starter with Higher vocational education
• Good knowledge of wind turbine systems and components, in particular gearboxes.
• Possession of / willing to get the necessary certificates (i.e. VCA, Safe working on Heights,
Offshore H&S training)
• Willingness to travel frequently
Profile
• You like to travel and have affinity with other cultures
• You are a team player, but also able to act independently
• You are pragmatic and solution-oriented
• Excellent communication skills, especially in English and another language, both verbally and in
writing
MECAL offers
• Participation in a very enthusiastic team
• Involvement in a world changing industry
• An open, efficient and pleasant work environment
• Good developmental and educational opportunities
• Good primary and secondary benefits

6. Information application
For more information you can e-mail Dick van Haare (Recruitment) or contact him at +31 53 4821 400.
Check also the section Wind Energy Industry on the website. You can send your application and
resume to hrd@mecal.eu , Attn: Mr. Dick van Haare.

7. Mechanical Design Engineer
Responsibilities
• As a mechanical engineer you are responsible for the design of wind turbines.
• You create and maintain drawings using CAD tools and techniques.
• You demonstrate initiative and judgment in such matters as selecting, placing
and accentuating detail or in identifying problems.
• You exercise initiative in completing recurring assignments independently.
• You check interfaces between components.
Requirements
• Educational requirement is an engineering degree (B.Sc or B.Sc.).
• You have good knowledge of and experience with the use of CAD systems as
SolidWorks and Pro Engineer.
Profile
• Knowledge of the wind energy industry is an advantage.
• You convincingly present your results and clarify your work.
• You can document the work you performed.
• Significant experience in the field of 3D design of large components and
integration of smaller parts within these large components.
• You feel well at home in a team, know the different phases of a project and
can adapt to these phases, but you are also able to perform independently.
MECAL offers
• An attractive salary.
• Good balance between work and leisure.
• An open, efficient and pleasant work environment.
• Good developmental and educational opportunities.
• Good primary and secondary benefits.
Information application
For more information you can e-mail Ron Kammeijer (Business Unit Manager) or
contact him at +31 53 4821 481. Check also the section wind energy on the website.
You can send your application and resume to hrd@mecal.eu , Attn: Mr. Dick van
Haare.

8. Structural Design Engineer
Responsibilities
• Strength analysis of major wind turbine components using ANSYS.
• Optimization of components.
• Preparation of documentation suitable for certification of wind turbines.
• You check interfaces between components.
Requirements
• Educational requirement is an engineering degree (M.Sc).
• You have good knowledge of and experience with the use of Ansys.
Profile
• Knowledge of the wind energy industry is an advantage.
• You convincingly present your results and clarify your work.
• Significant experience in the field of stress analysis and finite element analysis
of large structural components.
• You feel well at home in a team, know the different phases of a project and
can adapt to these phases, but are also able to perform independently.
MECAL offers
• An attractive salary.
• Good balance between work and leisure.
• An open, efficient and pleasant work environment.
• Good developmental and educational opportunities.
• Good primary and secondary benefits.
Information application
For more information you can e-mail Ron Kammeijer (Business Unit Manager) or
contact him at +31 53 4821 481. Check also the section wind energy on the website.
You can send your application and resume to hrd@mecal.eu , Attn: Mr. Dick van
Haare.