1. Resumen
Título: Mechanical Engineer
Descripción:
As a Mechanical Engineer, you will be responsible for the technical definition and
detailing of multidisciplinary projects within the total design and construction of
machines together with colleagues within other specialist fields. You will be involved in
setting up the requirements and responsible for the development, design, realization and
integration of mechanical architecture. Requirements: Our client is looking for well-
educated technicians with a Master in Mechanical Engineering who possess excellent
draughtsman skills. As a candidate for this position, you have: - A Bachelor or Master
degree (in Mechanical Engineering) with a good academic record - Knowledge of
construction principles and analysis methods - At least 3 years experience in mechanical
engineering - Knowledge of 3D Cad systems (Solid Works, NX e.a.) - Excellent
analytical skills and abstraction ability - Excellent communication skills - Affinity with
Mechatronics
Lenguas exigidas: inglés-bueno
Fecha de inicio: 23/08/2013
Fecha de fin: 23/08/2014
Información geográfica
País: Países Bajos Región : EXTRA-REGIO
Salario / contrato
Horas por semana: 40-40
Tipo de contrato: TEMPORAL + JORNADA COMPLETA
Requisitos
Nivel educativo requerido: Educación superior (incluida formación académica)
Se requiere experiencia: Entre 2 y 5 años
Empresario
Nombre: KP&T projectadvies
Información: Smolders H Henk
Dirección: SCHOUTLN 13
Teléfono: 0495451515
Cómo solicitar el puesto
Cómo solicitar el puesto: Acudir con curriculum a Foro Deusto*
2. Resumen
Título: Senior Designer Electronics
Descripción:
The Senior Designer Electronics will contribute to the ongoing growth in development
and engineering, by contributing to project acquisition, the product architecture and the
project execution (with electronics development partners). You are responsible for the
design of electronic components and control systems for high-end mechatronic
modules. Develop/drive architectural concepts and design, specification of electronic
modules and systems and support trade-offs between mechanical, electronic, and
software competencies. Specify and outsource specific development and engineering
activities to electronics development partners. Maintains a network of best in class
electronics development and engineering partners. Lead the electronics designers and
engineers in the multidisciplinary project team. Contribute specialist knowledge in one
or more electronic engineering fields, such as signal processing, analog, digital and
power electronics, firmware, buses, PCB lay-out, EMI, etc. Support allocation of
manufacturing and other supply chain decisions. Document specifications, concepts,
and designs, test analysis results. Requirements • Technical University, Master in
Electrical Engineering; • 5 to 10 years experience in design of electronic control
systems and components for high-end equipment and/or products, in multidisciplinary
development teams. Personal Skills • Team player; • Analytical, pragmatic; • Creative; •
Good communication skills and proficient in Dutch and English.
Lenguas exigidas: inglés-bueno
Fecha de inicio:
Fecha de fin:
Información geográfica
País: Países Bajos Región : EXTRA-REGIO
Salario / contrato
Horas por semana: 40-40
Tipo de contrato: TEMPORAL + JORNADA COMPLETA
Requisitos
Nivel educativo requerido: Educación superior (incluida formación académica)
Se requiere experiencia: No se precisa
Empresario
Nombre: KP&T projectadvies
Información: Smolders H Henk
Dirección: SCHOUTLN 13
Teléfono: 0495451515
Cómo solicitar el puesto
Cómo solicitar el puesto: Acudir con curriculum a Foro Deusto*
3. Resumen
Título: Electrical Lay Out System Architect
Descripción:
As System Electrical Layout Architect, you will primarily take responsibility for define, document
and maintain requirements and roadmaps for the electrical layout infrastructure. Translate the
electrical infrastructure requirements from the customer in a product definition together with system
Engineering and subsystem project teams. Investigate and write down the requirements of
production and service. Concept study and definition of the electrical infrastructure of the products.
System level impact analysis of new platforms. Perform trade-off studies to determine the preferred
implementation scenario for the realization of the electrical infrastructure. Design and draw a
modular electrical 3D concept that meets the requirements of your stakeholders, the international
standards on electrical safety and EMC. In addition to the main responsibilities detailed above, you
need to demonstrable competency on volume management of all electrical modules of the product in
a 3D CAD tool. Making proposals for the best / most effective volume use together with the
mechanical 3D architects. Making assessments for future volumes. Organize reviews with System
Engineering, mechanical 3D design team, multifunctional projects, production and service during
the study, definition and realization phase. Being accountable for the realization of the maximum
reuse of all standardized design building blocks for cables, racks, cabinets and modules. Acting as a
"knowledge base" and technical coach for Electrical Layout-, Electrical Construction designers and
Electrical Integrator. Requirements • Master's Degree in electrical engineering or similar level
acquired by working experience. • At least 2-3 years of relevant work experience in 3D Electrical
system design; • At least 4-5 years overall industrial work experience; • Broad technical knowledge
on electronics / cabling / mains distribution / electrical safety / diagnose / electronics cooling; •
Experience in: any tool related to 3D CAD; • Experience with NX is preferably; • Excellent English
language skill in writing and speaking; • Preferably have already some previous experience working
with big complex high tech companies or multidisciplinary organization. Personal Skills: • Excellent
communication skills. Because of the stakeholder’s management aspect in your role, it is a must that
you have excellent communication skills; • High motivated team player; • Accuracy, systematic
approach, analytical, problem solving; • Pragmatic attitude; • Leadership (pro-active); • Wide scope
on system level and organization level ( production and service); • Ability to provide technical
direction to a team of designers
Lenguas exigidas: inglés-bueno
Fecha de inicio:
Fecha de fin:
País: Países Bajos Región : EXTRA-REGIO
Horas por semana: 40-40
Tipo de contrato: TEMPORAL + JORNADA COMPLETA
Extras
Se ofrece alojamiento: Sí Traslado incluido: No
Comidas incluidas: No Gastos de viaje: Sí
Requisitos
Nivel educativo requerido: Educación superior (incluida formación académica)
Se requiere experiencia: Entre 2 y 5 años
Cómo solicitar el puesto: Acudir con curriculum a Foro Deusto* KP&T projectadvies
4. Resumen
Título: Digital Designer Electronics
Descripción:
In this role you drive the complete development cycle of digital electronics, PCB’s,
from architecture definition up to board design, verification and implementation
Lenguas exigidas: inglés-bueno
Fecha de inicio:
Fecha de fin:
Información geográfica
País: Países Bajos Región : NEDERLAND
Salario / contrato
Horas por semana: 40-40
Tipo de contrato: TEMPORAL + JORNADA COMPLETA
Requisitos
Se requiere experiencia: Entre 2 y 5 años
Empresario
Nombre: KP&T projectadvies
Información: Smolders,H
Dirección: (Address:SCHOUTLN ,13,6002EA,WEERT)
Cómo solicitar el puesto: Acudir con curriculum a Foro Deusto*
5. Resumen
Título: System Architect Hardware
Descripción:
Job description You will be working in a complex electronic environment, including
machine control with engines, valves and other actuators are controlled based on set
parameters and current sensor information. Such controllers are used in the
semiconductor industry, for medical diagnostic equipment and electron microscopes. To
perform well in this job you need to bring relevant technical experience. You should be
able to define optimal technical solutions together with specialists for the requested
problems. In the function of System Architect you’re setting the specifications of whole
systems or products. You give reviews and conducts feasibility studies from the
customer. In addition gives you technical support to the commercial Department. And
you're the leader of internally and externally projects. Requirements • Bachelor or
Master degree; • At least 5 years relevant experience; • You have to work well under
pressure • You have to be able to give substance to their function independently; • The
activities are always performed, especially in-house but possibly also on location at our
customers; • Good communication skills are a must for this feature; • Excellent English
language skill in writing and speaking. Personal skills • Highly motivated team player; •
Good communicator; • Creative negotiator.
Lenguas exigidas: inglés-bueno
Fecha de inicio:
Fecha de fin:
Información geográfica
País: Países Bajos Región : EXTRA-REGIO
Salario / contrato
Horas por semana: 40-40
Tipo de contrato: TEMPORAL + JORNADA COMPLETA
Extras
Se ofrece alojamiento: Sí Traslado incluido: No
Comidas incluidas: No Gastos de viaje: Sí
Requisitos
Nivel educativo requerido: Formación técnica avanzada
Se requiere experiencia: Entre 2 y 5 años
Cómo solicitar el puesto
Cómo solicitar el puesto:
Acudir con curriculum a Foro Deusto*
KP&T projectadvies
Información adicional
Número de puestos: 1 Fecha de publicación:
6. Resumen
Título: Mechatronics System Architect
Descripción:
As a Mechatronics System Architect in this High Tech company you are responsible to
create a technically consistent system design that meets the functional requirements of
our customers within the boundaries of overall cost and timing
Lenguas exigidas: inglés-bueno
Fecha de inicio:
Fecha de fin:
Información geográfica
País: Países Bajos Región : NEDERLAND
Salario / contrato
Horas por semana: 40-40
Tipo de contrato: TEMPORAL + JORNADA COMPLETA
Requisitos
Se requiere experiencia: Entre 2 y 5 años
Empresario
Nombre: KP&T projectadvies
Información: Smolders,H
Cómo solicitar el puesto
Cómo solicitar el puesto: Acudir con curriculum a Foro Deusto*
Fecha límite de solicitud:
Información adicional
Número de puestos: 1
7. Resumen
Título: High Tech Design Engineer
Descripción:
Job Description To contribute to the development of products by designing, creating and testing sub-
systems within the restrictions imposed by system specifications, costs and planning considerations.
Working on the design of one or more developments or issues, creating designs with a small team of
mechanical experts in project setting. Continuously improving quality of mechanical designs.
Working together with the architect(s), lead engineer(s), team lead and (jr) designers, to enable
reliable, stable, safe, contamination free, cost effective and easy to manufacture/service systems. Is
concerned with the application of precision mechanical construction principles . Realizes the
qualification of the design by contributing to the specification of various tests. Designs and realizes
test equipment and appliances and is responsible for ensuring that prototypes are built and tests are
carried out. Is responsible for the technical product documentation. Requirements BSc or MSc in
Mechanical Engineering; At least 2 years of relevant work experience in expertise area Mechanical
layout or MSc degree: with at least 1 year of relevant work experience in expertise area Mechanical
layout; Specifics for Mechanical Layout: Layout and volume overview/architecture, in view of
form-fit and functionality. Statics and kinematics, in view of stability and accuracy required;
Experience in precision engineering design of high-tech equipment in a complex technical multi-
disciplinary environment; Experience with NX and TCE; Experience with FEM tools and statiscal
analyses; Knowledge in Design4Manufacturing, Design4Assembly; Excellent communication skills,
in view of links to other (sub) disciplines/ sectors and suppliers. Personal skills Highly motivated
team player with excellent social, coordination and communication skills; Ability to work in an
international multicultural setting; Ability to excel in creative design and flawless execution of
precision parts/(sub)modules; Flexible and open mindset, anticipating on a challenging and dynamic
environment; Eager to drive his own development.
Lenguas exigidas: inglés-bueno
Fecha de inicio:
Fecha de fin:
Información geográfica
País: Países Bajos Región : EXTRA-REGIO
Salario / contrato
Horas por semana: 40-40
Tipo de contrato: TEMPORAL + JORNADA COMPLETA
Extras
Se ofrece alojamiento: Sí Traslado incluido: No
Comidas incluidas: No Gastos de viaje: Sí
Requisitos
Nivel educativo requerido: Formación técnica avanzada
Se requiere experiencia: Entre 2 y 5 años
Cómo solicitar el puesto:
Acudir con curriculum a Foro Deusto*
KP&T projectadvies
Número de puestos: 1 Fecha de publicación:
8. Resumen
Título: System Architect Mechanical Layout
Descripción:
Deliver high level mechanical system layout architecture that enables the functionally optimal and cost
effective engineering of new systems. Creation and investigation of layout concepts. Discuss with
projects and sectors. Come up with well-considered choices, validated against system requirements.
Investigate serviceability. Define concepts. Validate against test specifications. Validate concept on high
level requirements regarding transportability and install at customer site. Definition of high level
volumes and technical interfaces. Monitor that projects stay within agreed volumes. Make use of your
creativity and helicopter view to find solutions in case of conflicts. Knowledge transfer to production
and other relevant groups. Contribute to system roadmaps. Coaching and training on the job of
mechanical engineers in the team. Setting direction in and deployment of the Way of Working (a.o.
using V-model, PGP process, design reviews). Contribution to the development of a state-of-the-art,
high-tech measurement system. Challenge to meet performance specifications, quality aspects, time
considerations and cost. Come in touch with every engineering process step. Requirements BSc or MSc
in Mechanical Engineering At least 3-5 years of experience in creating new machine concepts (or large
complex modules). Covering all aspects like layout, serviceability, transportability, install, performance,
etc. Basic knowledge of thermal management, statics and dynamics; Experience with NX (or other 3D
design tool); Familiar with FEM and related tools Personal skills Technical leadership; Sets out direction
for technical project teams; Abstract thinking, out-of-the box thinking; Helicopter view Communication.
Effective communication with all levels and disciplines. Clear and structured way of reporting;
Networking. Build and maintain networks throughout the organization; Able to challenge others, to
come up with even better ideas
Lenguas exigidas: inglés-bueno
Fecha de inicio:
Fecha de fin:
Información geográfica
País: Países Bajos Región : EXTRA-REGIO
Salario / contrato
Horas por semana: 40-40
Tipo de contrato: TEMPORAL + JORNADA COMPLETA
Requisitos
Nivel educativo requerido: Formación técnica avanzada
Se requiere experiencia: Entre 2 y 5 años
Se necesita permiso de
conducción:
No
Empresario: KP&T projectadvies
Cómo solicitar el puesto
Cómo solicitar el puesto: Acudir con curriculum a Foro Deusto*
Fecha límite de solicitud:
Número de puestos: 1 Fecha de publicación:
9. Resumen
Título: Lead engineer Precision Mechanics
Descripción:
Job description Take ownership of one or more developments or issues. Leading a design and/or small
team of Mechanical experts in project setting. Is responsible for the design of precision mechanical
tools, which are reliable, stable, safe, contamination free, cost effective and easy to manufacture and
service. Take lead in running tool developments or issues. Create and execute plan. Clear
communication of status and results. Translate performance specifications into tested and released
Hardware. Incorporation of externally designed Modules from OEM partners/co-developers. Seeks
customers satisfaction and optimal manufacturability and serviceability. Development of Precision
Engineering Tooling competences. Requirements • MSc, or Ph.D in mechanical engineering; • At least
5 years of relevant working experience; • Experience in leading project teams in a complex technical
environment; • Knowledge of precision engineering, ergonomics, dynamics, mechatronics , thermal
and high precision adjustment, position and fixation solutions; • Experience with NX (or other 3D
design tool); • Familiar with FEM and related tools. Personal skills • Highly motivated team player
with excellent social, coordination and communication skills • MSc, or Ph.D in mechanical
engineering; • At least 5 years of relevant working experience; • Experience in leading project teams in
a complex technical environment; • Knowledge of precision engineering, ergonomics, dynamics,
mechatronics , thermal and high precision adjustment, position and fixation solutions; • Experience
with NX (or other 3D design tool); • Familiar with FEM and related tools. Personal skills • Highly
motivated team player with excellent social, coordination and communication skills
Lenguas exigidas: inglés-bueno
Información geográfica
País: Países Bajos Región : EXTRA-REGIO
Salario / contrato
Horas por semana: 40-40
Tipo de contrato: TEMPORAL + JORNADA COMPLETA
Extras
Se ofrece alojamiento: Sí Traslado incluido: No
Comidas incluidas: No Gastos de viaje: Sí
Requisitos
Nivel educativo requerido: Educación superior (incluida formación académica)
Se requiere experiencia: Entre 2 y 5 años
Cómo solicitar el puesto: Acudir con curriculum a Foro Deusto* KP&T projectadvies
Información adicional
Número de puestos: 1 Fecha de publicación: 21/08/2013
10. Resumen
Título: Testengineer
Descripción:
Test Engineer Are you interested in working with and testing of High Tech systems? And can you express
yourself well in English?Then we want to get in touch with you! For our client, a world's leading provider of
lithography systems for the semiconductor industry, we are looking for a Test Engineer. They manufacture
complex machines that are critical to the production of integrated circuits or chips. Description As a Test
Engineer within this organization, you are fine-tuning and qualify High Tech systems according to
established specifications, quality-rules and production times. You will carry out tests relating to quality,
production and new products. Thereby you will signaling, report and solve problems when needed. You
report all the process and administrative information in SAP. And work the machine statuses in a journal
according to the specific methods. You will be working in a multicultural and multidisciplinary team, in
where knowledge sharing is very important. Requirements As a candidate for this position, you: - Have a
Bachelor degree in Mechanical, Mechatronics and Electrical Engineering, no experience required or a
vocation degree with at least 2 years of experience; - Are interested in a high-tech manufacturing
environment. Personal Skills As a candidate for this position, you: - Have an independent, purposeful and
flexible attitude; - Are a service oriented team player; - Work structured; - Are interested in working with
computers in a clean room testing environment. - Are willing to work in 5 shifts. This also means the week at
night and during the day on weekends
Lenguas exigidas: inglés-bueno
Fecha de inicio:
Fecha de fin:
Información geográfica
País: Países Bajos Región : EXTRA-REGIO
Salario / contrato
Horas por semana: 40-40
Tipo de contrato: INDEFINIDO + JORNADA COMPLETA
Extras
Se ofrece alojamiento: Sí Traslado incluido: No
Comidas incluidas: No Gastos de viaje: No
Requisitos
Nivel educativo requerido: Formación técnica avanzada
Se requiere experiencia: No se precisa
Se necesita permiso de conducción: No
Cómo solicitar el puesto : Acudir con curriculum a Foro Deusto* KP&T projectadvies
Información adicional
Número de puestos: 1 Fecha de publicación:
11. Resumen
Título: System install engineer
Descripción:
Would you like to work international and do you want to see different companies from the inside
without changing from employer? And are you a flexible person?Then we want to get in touch with
you! For our client, a world's leading provider of lithography systems for the semiconductor industry,
we are looking for a System Install Engineer. They manufacture complex machines that are critical to
the production of integrated circuits or chips. Description You are responsible to Install the leading
edge lithographic systems at the customer site, within specifications, on time, with quality exceeding
the customers’ expectations. You will be working for 3 weeks intern in the company in the Test Phase
of the machine. You will join the test department to make yourself acquainted with the technical states
of the machine. After the 3 weeks you will host the transfer from the company to the customer and you
will go to the customer. On site at the customer the machine will be mechanical assembled by a third
party. After the mechanical install you will be responsible for the moment of “power on”. You are
expected to calibrate and qualify the machine on site, according to a pre-defined test-sequence similar
to the tests that have previously been preformed intern at the company. At the end of the System Install
period (4 to 8 weeks) you’re expected to deliver his systems according to previous agreed performance
specifications detailed in a performance report, similar to the one that has been agreed upon during test.
You’re expected to prepare all transfer documentation and again host the transfer
moment.Requirements As a candidate for this position, you have: - Intermediate Vocation degree in
Engineering + experience or Bachelor degree in engineering, no experience required; - Knowledge of
Mechanical aptitude, electronics, optics and pneumatics; - Available for at least 3 years for this job; -
Speak, read and write English perfectly. Personal Skills As a candidate for this position, you: - Are
flexible (!); - Are an analytical thinker; - Are stress resistant; - Are structured; - Are able to work
independent as well in a team; - Have good communication skills with focus on reporting,
understanding, influencing and supporting.
Información geográfica
País: Países Bajos Región : EXTRA-REGIO
Salario / contrato
Horas por semana: 40-40
Tipo de contrato: INDEFINIDO + JORNADA COMPLETA
Extras
Se ofrece alojamiento: Sí Traslado incluido: No
Comidas incluidas: No Gastos de viaje: No
Requisitos
Nivel educativo requerido: Formación técnica avanzada
Se requiere experiencia: No se precisa
Se necesita permiso de conducción: No
Empresario: KP&T projectadvies
Cómo solicitar el puesto: Acudir con curriculum a Foro Deusto*
12. Resumen
Título: Nurses
Descripción:
We are looking for nurses (male or female) for the OR and the Intensive Care. The contract is for 1 year (47
week per year, 36 hours per week). Converting the diplomas to the German language and the registering of the
nurses is controlled by us. You will be located throughout Germany. Housing and transportation (residential
work traffic) is controlled by us. Before you can start working in Germany, you must learn to speak German at
A2 level in the country of origin. When you are working, you are also required to go to school and learn
German until level B2 and C1 has been reached. This will all be paid by us, I-Flex Medical. The year is divided
into 3 periods. Per period your work will be assessed. Per period your salary will increase. The first period the
nurses (m/f) will start as assistant nurses until their German language is at level B1. The second and third period
you will be working independently as a nurse. You will get paid every 4 weeks. You can look us up on You
Tube: I-flex Medical. Please send your CV in English.
Información geográfica
País: Germany Región :
Salario / contrato
Horas por semana: 36-36
Tipo de contrato: TEMPORAL + JORNADA COMPLETA
Extras
Se ofrece alojamiento: Sí
Traslado
incluido:
No
Comidas incluidas: No Gastos de viaje: Sí
Requisitos
Nivel educativo requerido: Universitaria
Se requiere experiencia: Hasta 2 años
Se necesita permiso de conducción: No
Empresario
Nombre: I Flex Detachering B.V.
Información: Wijk P Petra
Dirección: Beurtschipperstraat 114
Teléfono: 0104160400
Email: info@iflex-uitzendbureau.nl
Cómo solicitar el puesto
Cómo solicitar el puesto: Enviar CV al empresario y/o acudir al FORO DEUSTO
Contacto:
Fecha límite de solicitud: 11/04/2014
Información adicional
FORO DEUSTO