2. Brief flow of presentation:
Introduction
Structure of optical fiber
Working principle of optical fiber
Optical fiber communication system
Application of optical fiber
3. An optical fiber is a hair thin cylindrical fiber of glass or any
transparent dielectric medium.
The fiber which are used for optical
communication are wave guides
made of transparent dielectrics.
Its function is to guide visible and
infrared light over long distance.
Introduction:
5. Core- Central tube of very thin size made up of optically
transparent dielectric medium and carries the light form
transmitter to receiver. The core diameter can vary from about
5um-100 um.
Cladding- Outer optical material surrounding the core having
reflecting index lower than core. It helps to keep the light within the
core throughout the phenomenaof total internal reflection.
Buffer Coating- Plastic coating that protects the fiber made of
silicon rubber. The typical diameter of fiber after coating is 250-
300um.
Conti…
6. Working principle:
Total Internal Reflection(TIR)
When an ray of light travels from a denser to a rarer medium such
that the angle of incidence is greater than the critical angle, the
ray reflects back into the same medium this phenomena is called
TIR.
In the optical fiber the rays undergo repeated total number of
reflections until it emerges out of the other end of the fiber, even
if fiber is bend.
7. Classification of optical fiber:
Optical fiber is classified into two categories based on:-
1. The number of modes-
Single mode fiber(SMF) and
Multi-mode fiber(MMF)
2. The reflective index-
Step index optical fiber
Graded- index optical fiber
8. On basis of number of modes:
Single mode fiber-
In single mode fiber only one mode can propagate through the
fiber.
It has small core diameter (5um) and high cladding diameter
(70um).
Difference between the refractive index of core and cladding is
very small.
There is neither dispersion nor degradation therefore it is
suitable for long distance communication.
The light is passed through the single mode fiber through laser
diode.
9. Multi- mode fiber:
It allows a large number of modes for
light ray travelling through it.
The core diameter is 40um and that
of cladding is 70um.
The relative refractive index
difference is also large than single
mode fiber.
There is signal degradation due to
multimode dispersion.
It is not suitable for long distance
communication due to large
dispersion and attenuation of signal.
10. On the basis of refractive index:
There are two type of optical fiber:-
Step index optical fiber
Graded- index optical fiber
11. Applications:
Optical fiber have wider range
of application in almost all field,
some are specified below:-
In telecommunication field
Civil, consumer and industrial
application
In military applications
Broadband applications
In decorations, etc.