1. NISANTH.K.N [CFPS, Diploma in EC, BE mechanical Engineering-pursuing]
Current Address
AL Shimaliyya Fire and Safety,
Red Avenue Buidling,
Office-108, UAE, PO-94293.
sinunisanth@gmail.com
sinunisanth@yahoo.com
Ph- +971-556816213
Objectives:
Certified Fire Protection Engineer looking for to be an integral part of an organization having multi-
varied projects by take up the challenges of the organization conceptualization to implementation in fire
protection/loss prevention/HSE wing, and myself achieve high carrier growth through a continuous learning
process and keep myself dynamic, visionary and competitive with the changing scenario of the world.
Key Skills and Qualities:
In depth knowledge and good experience in following/applying standards and codes
o NFPA, NEC, FM, API, ASTM, ANSI, IP, BS, UAE fire Code, OSHA, ISO, ISI, AWWA,TAC,BS
Good experience in Active and Passive Fire Protection, Explosion prevention/ mitigation technologies,
security and safety system and other wings of Health Safety Environment.
Good knowledge and experience in other MEP and Engineering wing
Capable to do Fire and Life safety survey & inspection, Technical Repot, QRA, FEED and FEE,
Estimation and coasting, Strategy Developing, Material Selection and Submittal, Detailed Design,
project scheduling, Evaluation and Calculations, Project Supervision, Project Execution, Testing and
Commissioning, Maintenance and Trouble shooting.
o Water based fire protection systems:- Automatic Sprinkler, Fire Water/Foam Hydrant and
Monitors, Stand Pipe and Hose System, Fixed Water Spray, Foam Water Sprinkler and Foam
Water Spray, Low Medium and High Expansion Foam Systems, Preaction, Water Mist.
o Suppression systems: – IG01, IG55, IG100, IG541, CO2, HFC 22EA, ECARO-25, Kitchen Hood,
DCP.
o Other PBD and custom designs:- CAF, Co2 Water Expelling System, Twin Extinguishing
Systems, Rim Seal Protection With Sensing Tubes, Deluge/ Fire pump/ Foam pump Skids and
so forth.
o Low Voltage Systems: - Fire Detection and Notification Systems, Gas Detection systems,
VESDA, LHD Cable, Mimic panel, other customized PLC, and other control Panels and control
joystick.
o Safety and Security System:- Emergency and Exit Light (self contained and central battery),
Photo Luminance and other signage, Voice Evacuation, Voice Alarm, CCTV, Door Holder and
so on.
o Passive Fire Protection:- fire confining, penetration sealing, fire/smoke door and dampers,
smoke management design, explosion venting and so on.
Possessing good knowledge in manual and computerized hydraulic, pneumatic, seismic, light
intensity, ASD calculations, prepare/ analyze of Isometric, nodal diagrams and calculation results.

2. o Calculation software knowledge (Hass, Pipenet, GEM, Coosa, CO2, IG and ECARO-25 Flow
Calc, Relux, Xtrails )
Possessing good knowledge in manual and computerized calculations of pump head, exhaust pipe
sizing, pipe support sizing, seismic load, cable size, battery selection, venting of different fire
protection systems.
Acquired good experience in overseas and local site execution, Inspection and system Testing and
Commissioning.
Aware about products and procedures of UL, FM, ISO,OSHAS, Kite mark, CE and other listing and
certification authority’s requirements and to work with complying.
Good knowledge in computer operating systems, networking and software, Auto Cad, MS office, MS
project, Tally, Photo shop and PDF editor and also knows basics of "C,C++" and high level
programming languages (8085,8086,LISP).
Good knowledge and experienced in trouble shooting of electronics, electrical and mechanical
Systems
Team player, Good leader, hard worker, fast learner, better interaction to coordinate job and
completion of tasks.
Multilingual having Strong written and oral communication skill in English, Hindi, Malayalam, Tamil
and elementary proficiency in Arabic.
Personal Achievements:
I have been part of design, estimation, execution, inspection, testing and commissioning of more than
800 small, medium and high values Projects. Which includes Oil tank farms, offshore structures, refineries,
substations, power plants, High-rise buildings, Air base hangers, Air/Sea ports, offshore structures, O&G
projects, educational buildings, star Hotels/ Resorts, Warehouses, Factories, Cooling Plants, Oil storage
facilities and other Industrial and Commercial buildings/structures. Experience gained by Visit and/or works
jobs counties in Europe, Africa and Asian continents. Detailed Project list can provide if required.
Technical Education (Pursuing Since 2012)
Discipline : AMIE (Equivalent to B.TEC/B.E)
University : Institution of Engainer (India) (IEI)
Technical Education (2002)
Discipline : Diploma In Electronics & Telecommunication
Campus : Government Polytechnic, Kunnumkulam, Kerala, India
Technical High School Education (1998)
Discipline : Technical High School Leaving Certificate
Board : Kerala State Technical Board Of Secondary Education
Technical Certification
Discipline : Certified Fire Protection Specialist CFPS
Association : NFPA Web Links For Details

3. Career Experience:
Al Shimaliyya Safety and protection L.L.C : Since February 2015- present
Designation : Design/Estimation engr.
Al shimmaliya safety and protection L.L.C is OSHA BS and is an ISO 9001:2000, 14001 certified
company. http://www.dakota-fire.com/index.html. My major duties and responsibilities are same as for
previous employer (Naffco) but not limited to this.
NAFFCO (National Fire Fighting Manufacturing FZCO) : Since May 2008- June 2014
Designation : Fire Protection Engineer.
NAFFCO is the largest Fire Fighting Equipment manufacturing company in the Middle East; it is NFPA,
UL, BS and is an ISO 9001:2000, 14001 certified company. My major role and responsibilities listing below
but it’s not limited to this. http://www.naffco.com/
• Conduct fire and safety site inspection and surveys to prepare Technical Reports, Proposals,
conceptual drawings and develops strategies work methodologies, HSE manual for the environment
and built environments
• Estimating and coasting of project to meet the optimum and comply with client requirements
standards and specifications.
• Prepare Ingress and Egress evaluation, crowd management, emergency strategy other life safety
reports.
• Prepare/detailed checking of AutoCAD shop drawings, design drawings, P&I, P&F, Riser, Isometric,
schematic diagrams accordingly to system requirements, CAD standards, and in line with project
specification and standards if applicable.
• Submission and taking approval of document and drawings for the project from the
authority/concerns.
• Select the equipment and materials find suppliers and prepare engineering submittals and product
comply statements and so forth
• work scheduling using MS project, mobilization and equipment shipping, site store and inventory
control, so forth
• Prepare detailed engineering shop drawings, coordinate with other services and conduct/attend
meeting.
• prepare or evaluate hydraulic, pneumatic, light intensity, cable sizing, and other engineering
calculations and its results
• Supervise and schedule the installation, pressure testing and other physical inspections, pump and
equipment alignment checking, inventory and payment control, method statements, qualification so
forth
• Conduct T&C of systems, prepare test reports, Programming, cause and effect matrix of fire
protection systems/equipment
• Billing, Variations, and final handing over of a project, prepare as built drawings, maintenance
manual and other procedures.
• Conduct trouble shooting of fire protection and life safety systems

4. • Prepare procedures for HAZMAT storage, handling, recycling, and Emergency Service preparedness
schemes.
• Organize and conduct training, Seminars, presentations, technical and business meetings and other
engineering communication activities.
Acci Contracting, Bangalore, INDIA. : November 2004 - March 2008
Designation : Fire and Safety engineer
Acci Contracting leading contracting is a leading company in Fire Protection, Structure and other MEP
works. I had worked Devanahully International Airport and many other projects in India as a Fire and safety
engineer. . My major role and responsibilities listing below but it’s not limited to this.
• Conduct fire and safety site inspection and surveys to prepare Technical Reports, Proposals,
conceptual drawings and develops strategies work methodologies, HSE manual for the environment
and built environments
• Estimating and coasting of project to meet the optimum and comply with client requirements
standards and specifications.
• Prepare/detailed checking of AutoCAD shop drawings, design drawings, P&I, P&F, Riser, Isometric,
schematic diagrams accordingly to system requirements, CAD standards, and in line with project
specification and standards if applicable.
• prepare or evaluate hydraulic, pneumatic, light intensity, cable sizing, and other engineering
calculations and its results
• Submission and taking approval of document and drawings for the project from the
authority/concerns.
• work scheduling using MS project, mobilization and equipment shipping, site store and inventory
control, so forth
• Supervise and schedule the installation, pressure testing and other physical inspections, pump and
equipment alignment checking, inventory and payment control, method statements, qualification so
forth
• Billing, Variations, and final handing over of a project, prepare as built drawings, maintenance
manual and other procedures.
Electronic Controls & Discharge Systems, INDIA : July 2002 - October 2004
Designation : Mechanical/ Electrical Draftsman
Electronic Controls and Discharge Systems Pvt. Ltd. was started in October 2001, for manufacturing
and exporting HID lamp igniter. I worked in preparation production drawings and assembly drawings of
electrical and mechanical parts.
Interests and Hobbies:
Traveling, Reading, Chess, Hearing Music, Badminton, volley ball, Foot ball, Swimming, Running,
Fishing, martial arts
Reference: Ajith – HSE engineer, M/S Petrofac , Phone: +971-557121567
Subhash.K.S, -Operation Manager, M/S NAFFCO, Phone: +971-505371065.