New Wesco, Inc. is a metal fabricator and manufacturer with factories in China. They produce hot forgings, die castings, and sand castings out of various metals like iron, steel, aluminum, and zinc. New Wesco serves industries like oil & gas, automotive, agriculture, and dairy equipment. They offer competitive pricing, on-time delivery, ISO and QS certification, and experience with different materials and manufacturing processes.

1. New Wesco, Inc.Represented by: Sessions Co., LLC Hot Forgings, Die Castings & Sand Castings

2. Metal fabricator and manufacturer with factories in China Hot Forgings, Die Castings & Sand Castings, with extensive secondary finishing capability. Factories are ISO 9000 certified and QS certified New Wesco, Inc.

3. Parts that are good candidates for Forging: Medium to high volume Gray iron, ductile iron, steel, stainless steel, bronze, brass, zinc, or aluminum Part geometry favorable to one axis forming, with the parting line capable of lying on a plane through the center of the part Higher strength required than an equivalent cast or machined part Moderate tolerances Good surface finish Some secondary machining or finishing acceptable Why Hot Forging?

4. Parts that are good candidates for Die Casting: Moderately complex geometry Some drafts, fillet radii acceptable Consistent wall thickness Good or very good surface finish required Aluminum or zinc Medium to high volume Small to medium size Good tolerances Why Die Casting?

5. Parts that are good candidates for Sand Casting: Low to medium volumes Medium to large size Simple geometry Good surface finish Moderate tolerances Low strength requirements Draft and fillet radii acceptable Consistent wall thicknesses Some secondary machining and finishing acceptable Wide selection of materials Capable of being cast in 2 axes – no side pulls required Why Sand Casting?

6. Comparison of processes 106 Metal Injection Molding Powder Metallurgy 105 QUANTITY Die Casting 104 Investment Casting Machining 103 Low Medium High COMPLEXITY

7. Materials: Gray iron (Forging, Sand Casting) Ductile iron (Forging, Sand Casting) Steel (Forging, Sand Casting) Stainless steel (Forging, Sand Casting) Bronze (Forging, Sand Casting) Brass (Forging, Sand Casting) Zinc (Forging, Die Casting & Sand Casting) Aluminum (Forging, Die Casting & Sand Casting) Other processes: Investment Casting Machining Stamping Deep Drawing Welding Cold Heading Head Treating Metal Injection Molding Plastic Injection Molding Tool Making Capabilities

8. Oil & Gas Valves Automotive/Agriculture Cast Exhaust Manifolds Dairy Equipment Parts Brass Joints Elbows Housings Industries served

9. Oil & Gas - Valves

10. Automotive/Agriculture – Cast Exhaust Manifolds

11. Die Castings

12. Sand Castings

13. Stampings

14. Deep Drawing

15. On-time delivery Competitive pricing based on annual quantities Quotes are in US dollars ISO 9000 and QS certified Materials certificates of compliance Experience with a wide range of materials New Wesco offers to its customers:

16. New Wesco, Inc. www.newwesco.com Mr. Julian Zhao 376 Lemon Creek Drive, Suite A,Walnut, CA 9178 Ph: 909-595-8038 or 909-595-8094 Fax: 909-595-8136 E-mail: julianzhao@newwesco.com Sessions Co., LLC Mr. George Sessions PO Box 22901 Portland, OR 97269 Ph: 503-659-9958 Fax: 503-344-4631 E-mail: sessionsco@comcast.net Contact information

17. Thank you!