Z Score,T Score, Percential Rank and Box Plot Graph
Netw 230 Success Begins / snaptutorial.com
1. NETW 230 All ilabs weeks 1-7
For more classes visit
www.snaptutorial.com
NETW 230 Week 1 iLab 1 of 7: Basic Server Configuration
NETW 230 Week 2 iLab 2 of 7: Organizing Resources
NETW 230 Week 3 iLab 3 of 7: Sharing Files and Implementing DFS
NETW 230 Week 4 iLab 4 of 7: Exploring Data Storage and Printers
NETW 230 Week 5 iLab 5 of 7: DNS Configuration, Web Server, and
DHCP
NETW 230 Week 6 iLab 6 of 7: Group Policy and VPN Server
NETW 230 Week 7 iLab 7 of 7: Event Viewer and Performance
MonitorX
==========================
NETW 230 Quiz 2
For more classes visit
www.snaptutorial.com
1. (TCO 1) In addition to the Server Manager GUI tool, you can also use
the _____ command-line tool for managing server roles.
2. (TCO 1) _____ environment variables are defined by the operating
system and apply to any user logged onto the computer.
2. 3. (TCO 1) Windows _____ is a command-line interface or shell
4. (TCO 1) The Active Directory _____ defines the objects and the
information pertaining to those objects that can be stored in Active
Directory.
5. (TCO 1) In Active Directory, a(n) _____ functions as a partition
within which to group all of the network resource objects consisting of
servers, user accounts, shared printers, and shared folders and files
6. (TCO 1) A(n) _____ is a list of security descriptors (privileges) that
have been set up for a particular object, such as a shared folder or shared
printer.
============================
NETW 230 Quiz 3
For more classes visit
www.snaptutorial.com
1. (TCO 7) A _____ is an ACL that is configured by an administrator or
owner.
2. (TCO 2) Folders and files can be encrypted or decrypted by using the
_____ command in the Command Prompt window.
3. (TCO 3) Which of the following is a valid special permission?
4. (TCO 3) _____ is a naming convention that designates network
servers, computers, and shared resources.
3. 5. (TCO 3) A _____ is a program that reads lines of program code in a
source file and converts the code into machine-language instructions the
computer can execute.
6. (TCO 2) The two models for implementing DFS are stand alone and
_____.
=================================
NETW 230 Quiz 4
For more classes visit
www.snaptutorial.com
1. (TCO 4) The _____ integrates information about the print file with
information obtained from the printer driver installed at the client for the
target printer, in a process that Microsoft calls rendering
2. (TCO 4) _____ enables UNIX and Linux computers to print to shared
printers managed through Windows Server 2008.
3. (TCO 4) The _____ tab of a printer’s Properties dialog box has
options to specify which server port, such as LPT1, is used for the
printer, as well as options to set up bidirectional printing and printer
pooling.
4. (TCO 4) The _____ data type is used for printing text files formatted
according to the ANSI standard that uses values between 0 and 255 to
represent characters, numbers, and symbols.
5. (TCO 8) _____ is a process that creates a table containing file and
folder information for a specific file system in a partition
6. (TCO 8) A(n) _____ partition is created from space that is not yet
partitioned.
4. 7. (TCO 8) Disk mirroring involves creating a shadow copy of data on a
backup disk and is RAID _____.
8. (TCO 8) A _____ is a grouping of storage devices that forms a subnet
===============================
NETW 230 Quiz 5
For more classes visit
www.snaptutorial.com
1. (TCO 1) A(n) _____ is a DNS resource record that links a computer
or network host name to its IP address.
2. (TCO 1) The _____ is a DNS resource record that associates a
particular TCP/IP service to a server along with the domain of the server
and its protocol.
3. (TCO 1) In exclusive forwarding, the DNS server that initially
forwards the request is called a _____ DNS server.
4. (TCO 1) _____ automatically registers network clients that use
NetBIOS and builds a database that other network clients can query in
order to locate a computer
5. (TCO 1) _____ autoconfiguration means that the computer or network
device using IPv6 contacts a DHCP server for a leased address
6. (TCO 1) _____ is a dual-key encryption standard for communication
between a server and a client and is also used by Microsoft Internet
Explorer.
================================
5. NETW 230 Quiz 6
For more classes visit
www.snaptutorial.com
1. (TCO 9) _____ networking, which has been around since before the
Internet, means using a telecommunications line and a modem (or other
telephony device) to dial into a network or specific computers on a
network.
2. (TCO 9) _____ translates IP addresses on an internal network so that
the actual IP addresses cannot be determined on the Internet, because
each address is seen externally on the Internet as one or more decoy
addresses.
3. (TCO 9) A(n) _____ enables clients to run services and software
applications on Windows Server 2008 instead of at the client, which
means nearly any type of operating system can access Windows Server
2008
4. (TCO 9) Microsoft offers _____ for organizations that want a
Windows Server 2008 server, but with a much smaller attack surface.
5. (TCO 9) _____ can provide security for all TCP/IP-based application
and communications protocols, including FTP and HTTP, which are
used in Internet transmissions.
6. (TCO 9) RSoP _____ mode generates a report based on the current
policies in place and provides the resulting policy settings
7. (TCO 9) To determine compliance, NAP uses a server that is a _____.
6. 8. (TCO 9) The Institute of Electrical and Electronics Engineers (IEEE)
offers _____ as a wired and wireless authentication approach.
===============================
NETW 230 Week 1 Quiz
For more classes visit
www.snaptutorial.com
(TCO 1) _____ is the ability to increase the access to server resources
and provide fail-safe services by linking two or more discrete computer
systems so they appear to function as though they are one.
(TCO 1) _____ is a minimum server configuration, designed to function
in a fashion similar to traditional UNIX and Linux servers.
(TCO 1) The operating system kernel runs in _____ mode, which
protects it from problems created by a malfunctioning program or
process.
(TCO 1) _____ by a file system means that it tracks changes to files and
keeps a record of these changes in a separate log file.
(TCO 1) The _____ role is central to implementing Active Directory and
creating one or more domains.
(TCO 1) The _____ role is used to enable client computers to run
services and software applications on the server instead of on the client
===============================
NETW 230 Week 2 iLab 2 of 7: Organizing
Resources
7. For more classes visit
www.snaptutorial.com
iLab 2 of 7: Organizing Resources
i L A B A C C E S S
Accessing Your Lab
After logging into Element K, follow these steps to access your labs.
• Click the Professional Development tab located on the top of the
page.
• Select “Development Paths.” NETW 230 will be listed on this
page.
• Click on NETW 230 to see the labs.
• Your labs will be found under the appropriate week.
Starting Your Lab
There are two ways to start a lab activity.
• Schedule it. (Recommended)Because you will be accessing live
equipment, the number of students who can simultaneously perform a
lab is limited by the available resources. If you plan to perform your labs
during busy times (i.e., weekends), it is recommended that you schedule
the lab to make sure that lab resources will be available when you are
ready.
8. • Start it right away.
Note: If all lab resources are currently being used when you try to start
your lab, you will be given an opportunity to schedule the lab at a later
time.
i L A B O V E R V I E W
Scenario and Summary
Welcome to your Week 2 iLab!
• Install and Configure Active Directory (25 points)
• Organize Users and Groups (25 points)
Now you have a server and a Windows 7 PC. You will install and
configure Active Directory and add the Windows 7 PC to the domain.
Then you will add users and groups. You will also see how to manage
organizational units.
Deliverables
You are required to submit a lab report to this week’s iLab Dropbox.
i L A B S T E P S
9. STEP 1: Download the template
Download this week’s Lab Report Template. You will use this template
to create your lab report as you execute your lab. In creating your report,
you will capture screenshots at strategic points within your lab.
The lab report template provides detailed instructions for completing
your lab report.
STEP 2: Complete the lab work
After entering the main lab page, perform your lab.
1. Ensure that you meet the system requirements for this lab and that
you understand how to control the devices in the lab.
2. Understand the objectives and procedures for this lab by reading
the Summary, Scenario, Suggested Approach, and Sample Solution in
the Content area.
3. Start your lab and complete each task by following the steps in the
Sample Solution.
STEP 3: Submit your work
When you are satisfied with your documentation, submit your completed
report to the Dropbox located on the silver tab at the top of this page.
10. For instructions on how to use the Dropbox, read these Step-by-Step
Instructions or watch this Dropbox Tutorial.
See Syllabus “Due Dates for Assignments & Exams” for due date
information
================================
NETW 230 Week 3 iLab 3 of 7: Sharing Files and
Implementing DFS
For more classes visit
www.snaptutorial.com
iLab 3 of 7: Sharing Files and Implementing DFS
i L A B A C C E S S
Accessing Your Lab
After logging into Element K, follow these steps to access your labs.
• Click the Professional Development tab located on the top of the
page.
• Select “Development Paths.” NETW 230 will be listed on this
page.
• Click on NETW 230 to see the labs.
• Your labs will be found under the appropriate week.
11. Starting Your Lab
There are two ways to start a lab activity.
• Schedule it. (Recommended)Because you will be accessing live
equipment, the number of students who can simultaneously perform a
lab is limited by the available resources. If you plan to perform your labs
during busy times (i.e., weekends), it is recommended that you schedule
the lab to make sure that lab resources will be available when you are
ready.
• Start it right away.
Note: If all lab resources are currently being used when you try to start
your lab, you will be given an opportunity to schedule the lab at a later
time.
i L A B O V E R V I E W
Scenario and Summary
Welcome to your Week 3 iLab!
• Sharing Files and DFS (50 points)
You will set folder permissions, prepare Windows 7 for accessing shared
folders, share the folder, and then explore settings and the effects they
have on Windows 7 users in different groups. Distributed File System
(DFS) allows folders to be shared in a much better way by allowing for
fault tolerance and being able to move shares without changing the
mapping on the Windows 7 client.
12. Deliverables
You are required to submit a lab report to this week’s iLab Dropbox.
i L A B S T E P S
STEP 1: Download the template
Download this week’s Lab Report Template. You will use this template
to create your lab report as you execute your lab. In creating your report,
you will capture screenshots at strategic points within your lab.
The lab report template provides detailed instructions for completing
your lab report.
STEP 2: Complete the lab work
After entering the main lab page, perform your lab.
1. Ensure that you meet the system requirements for this lab and
that you understand how to control the devices in the lab.
2. Start your lab and complete each task by following the steps in
the Sample Solution.
STEP 3: Submit your work
13. When you are satisfied with your documentation, submit your completed
report to the Dropbox located on the silver tab at the top of this page.
For instructions on how to use the Dropbox, read these Step-by-Step
Instructions or watch this Dropbox Tutorial.
See Syllabus “Due Dates for Assignments & Exams” for due date
information
=============================
NETW 230 Week 3 Quiz
For more classes visit
www.snaptutorial.com
(TCO 7) _____ are stored as header information with each folder and
file, along with other characteristics, including volume label, designation
as a subfolder, date of creation, and time of creation.
(TCO 2) Folders and files can be encrypted or decrypted by using the
_____ command in the Command Prompt window.
(TCO 3) To share a server folder, access the _____ tab in the folder
properties dialog box and click the Share button (or from the Windows
Explorer, right-click the folder and click Share).
(TCO 3) Windows Server 2008 offers _____ for compatibility with
UNIX and Linux systems.
(TCO 3) _____ offers compatibility with Unix and Linux systems.
14. (TCO 2) _____ means that the same permissions are on a parent
object.X
============================
NETW 230 Week 4 iLab 4 of 7: Exploring Data
Storage and Printers
For more classes visit
www.snaptutorial.com
iLab 4 of 7: Exploring Data Storage and Printers
i L A B A C C E S S
Accessing Your Lab
After logging into Element K, follow these steps to access your labs.
• Click the Professional Development tab located on the top of
the page.
• Select “Development Paths.” NETW 230 will be listed on this
page.
• Click on NETW 230 to see the labs.
• Your labs will be found under the appropriate week.
Starting Your Lab
There are two ways to start a lab activity.
15. • Schedule it. (Recommended)Because you will be accessing live
equipment, the number of students who can simultaneously perform a
lab is limited by the available resources. If you plan to perform your labs
during busy times (i.e., weekends), it is recommended that you schedule
the lab to make sure that lab resources will be available when you are
ready.
• Start it right away.
Note: If all lab resources are currently being used when you try to start
your lab, you will be given an opportunity to schedule the lab at a later
time.
i L A B O V E R V I E W
Scenario and Summary
Welcome to your Week 4 iLab!
• Exploring Data Storage and Printers (50 points)
You will explore the properties of drive c, use ckdsk to check for disk
errors, and configure Windows Backup. You will share a printer on the
server, allow the printer to be published in Active Directory, then access
the printer from Windows 7.
Deliverables
You are required to submit a lab report to this week’s iLab Dropbox.
16. i L A B S T E P S
STEP 1: Download the template
Download this week’s Lab Report Template. You will use this template
to create your lab report as you execute your lab. In creating your report,
you will capture screenshots at strategic points within your lab.
The lab report template provides detailed instructions for completing
your lab report.
STEP 2: Complete the lab work
After entering the main lab page, perform your lab.
1. Ensure that you meet the system requirements for this lab and
that you understand how to control the devices in the lab.
2. Start your lab and complete each task by following the steps in
the Sample Solution.
STEP 3: Submit your work
When you are satisfied with your documentation, submit your completed
report to the Dropbox located on the silver tab at the top of this page.
17. For instructions on how to use the Dropbox, read these Step-by-Step
Instructions or watch this Dropbox Tutorial.
See Syllabus “Due Dates for Assignments & Exams” for due date
information
===============================
NETW 230 Week 4 Quiz
For more classes visit
www.snaptutorial.com
(TCO 4) The computer or print server device offering the printer share is
the network _____.
(TCO 4) When the spool file is fully formatted for transmission to the
printer, the print _____ pulls it from the spooler’s disk storage and sends
it off to the printer.
(TCO 4) The _____ tab of a printer’s Properties dialog box has options
to specify which server port, such as LPT1, is used for the printer, as
well as options to set up bidirectional printing and printer pooling.
(TCO 4) The _____ tool (also called the Print Management Console or
PMC) centralizes shared printer control in one place, enabling printer
administrators and operators to manage the print functions of some or all
of the shared printers on a network.
(TCO 8) _____ is a process that blocks a group of tracks and sectors to
be used by a particular file system, such as NTFS
(TCO 8) A(n) _____ partition is created from space that is not yet
partitioned
18. (TCO 8) Disk _____ is a fault-tolerance method that prevents data loss
by duplicating data from a main disk to a backup disk
(TCO 8) A _____ is a grouping of storage devices that forms a subnet
===============================
NETW 230 Week 5 iLab 5 of 7: DNS
Configuration, Web Server, and DHCP
For more classes visit
www.snaptutorial.com
iLab 5 of 7: DNS Configuration, Web Server, and DHCP
i L A B A C C E S S
Accessing Your Lab
After logging into Element K, follow these steps to access your labs.
• Click the Professional Development tab located on the top of the
page.
• Select “Development Paths.” NETW 230 will be listed on this
page.
• Click on NETW 230 to see the labs.
• Your labs will be found under the appropriate week.
Starting Your Lab
19. There are two ways to start a lab activity.
• Schedule it. (Recommended)Because you will be accessing live
equipment, the number of students who can simultaneously perform a
lab is limited by the available resources. If you plan to perform your labs
during busy times (i.e., weekends), it is recommended that you schedule
the lab to make sure that lab resources will be available when you are
ready.
• Start it right away.
Note: If all lab resources are currently being used when you try to start
your lab, you will be given an opportunity to schedule the lab at a later
time.
i L A B O V E R V I E W
Scenario and Summary
Welcome to your Week 5 iLab!
• DNS Configuration, Web Server, and DHCP (50 points)
You are going to create a host name in a new DNS zone that is like a
domain name. You will then add the web server role, create a web page,
and access the page from Windows 7. You will also set up a DHCP
server and test it from Windows 7.
Deliverables
20. You are required to submit a lab report to this week’s iLab Dropbox.
i L A B S T E P S
STEP 1: Download the template
Download this week’s Lab Report Template. You will use this template
to create your lab report as you execute your lab. In creating your report,
you will capture screenshots at strategic points within your lab.
The lab report template provides detailed instructions for completing
your lab report.
STEP 2: Complete the lab work
After entering the main lab page, perform your lab.
1. Ensure that you meet the system requirements for this lab and
that you understand how to control the devices in the lab.
2. Start your lab and complete each task by following the steps in
the Sample Solution.
STEP 3: Submit your work
21. When you are satisfied with your documentation, submit your completed
report to the Dropbox located on the silver tab at the top of this page.
For instructions on how to use the Dropbox, read these Step-by-Step
Instructions or watch this Dropbox Tutorial.
See Syllabus “Due Dates for Assignments & Exams” for due date
information
==============================
NETW 230 Week 5 Quiz
For more classes visit
www.snaptutorial.com
(TCO 1) The _____ DNS resource record spreads the load of DNS
lookup requests among multiple DNS servers as a way to provide faster
resolution for clients and better network response
(TCO 1) A(n) _____ DNS server contains a copy of the primary DNS
server’s zone database but is not used for administration (is not
authoritative).
(TCO 1) In exclusive forwarding, the DNS server that initially forwards
the request is called a _____ DNS server
(TCO 1) _____ enables a Windows Server 2008 server with DHCP
services to detect the presence of a new workstation and assign an IP
address to that workstation
(TCO 1) The official standard for DHCPv6 is defined in Request for
Comment _____.
(TCO 1) ASP.NET is part of _____
=================================
22. NETW 230 Week 6 iLab 6 of 7: Group Policy and
VPN Server
For more classes visit
www.snaptutorial.com
iLab 6 of 7: Group Policy and VPN Server
i L A B A C C E S S
Accessing Your Lab
After logging into Element K, follow these steps to access your labs.
• Click the Professional Development tab located on the top of
the page.
• Select “Development Paths.” NETW 230 will be listed on this
page.
• Click on NETW 230 to see the labs.
• Your labs will be found under the appropriate week.
Starting Your Lab
There are two ways to start a lab activity:
• Schedule it. (Recommended)Because you will be accessing live
equipment, the number of students who can simultaneously perform a
23. lab is limited by the available resources. If you plan to perform your labs
during busy times (i.e., weekends), it is recommended that you schedule
the lab to make sure that lab resources will be available when you are
ready.
• Start it right away.
Note: If all lab resources are currently being used when you try to start
your lab, you will be given an opportunity to schedule the lab at a later
time.
i L A B O V E R V I E W
Scenario and Summary
Welcome to your Week 6 iLab!
• Group Policy and VPN Server (50 points)
You are going to use group policy to configure password and account
lockout settings and then test the settings from Windows 7. You will
also configure a VPN server.
Deliverables
You are required to submit a lab report to this week’s iLab Dropbox.
i L A B S T E P S
24. STEP 1: Download the template
Download this week’s Lab Report Template. You will use this template
to create your lab report as you execute your lab. In creating your report,
you will capture screenshots at strategic points within your lab.
The lab report template provides detailed instructions for completing
your lab report.
STEP 2: Complete the lab work
After entering the main lab page, perform your lab.
1. Ensure that you meet the system requirements for this lab and
that you understand how to control the devices in the lab.
2. Start your lab and complete each task by following the steps in
the Sample Solution.
STEP 3: Submit your work
When you are satisfied with your documentation, submit your completed
report to the Dropbox located on the silver tab at the top of this page.
For instructions on how to use the Dropbox, read these Step-by-Step
Instructions or watch this Dropbox Tutorial.
25. See Syllabus “Due Dates for Assignments & Exams” for due date
information
=============================
NETW 230 Week 6 Quiz
For more classes visit
www.snaptutorial.com
(TCO 9) _____ is a WAN communications technology that relies on
packet switching and virtual connection techniques to transmit at rates
from 56 Kbps to 45 Mbps
(TCO 9) _____ helps ensure that the amount of bandwidth increases to
the maximum needed for the aggregated channels and reciprocally
contracts as the need becomes less
(TCO 9) _____ is similar to BAP, but it selects a preferred client when
two or more clients vie for the same bandwidth
(TCO 9) _____ enables authentication to take place before the Terminal
Services connection is established, which thwarts would-be attackers
(TCO 9) _____ can provide security for all TCP/IP-based application
and communications protocols, including FTP and HTTP, which are
used in Internet transmissions
(TCO 9) _____ applications (or software) involves setting up software
through a group policy so that the application is available for users to
install from a central application distribution server, such as through the
Add/Remove Programs capability via the user’s desktop
(TCO 9) To determine compliance, NAP uses a server that is a _____.
26. (TCO 9) The Institute of Electrical and Electronics Engineers (IE
EE) offers _____ as a wired and wireless authentication approach
==================================
NETW 230 Week 7 iLab 7 of 7: Event Viewer and
Performance Monitor
For more classes visit
www.snaptutorial.com
Accessing Your Lab
After logging into Element K, follow these steps to access your labs.
• Click the Professional Development tab located on the top of the
page.
• Select “Development Paths.” NETW 230 will be listed on this
page.
• Click on NETW 230 to see the labs.
• Your labs will be found under the appropriate week.
Starting Your Lab
There are two ways to start a lab activity:
• Schedule it. (Recommended)Because you will be accessing live
equipment, the number of students who can simultaneously perform a
lab is limited by the available resources. If you plan to perform your labs
during busy times (i.e., weekends), it is recommended that you schedule
27. the lab to make sure that lab resources will be available when you are
ready.
• Start it right away.
Note: If all lab resources are currently being used when you try to start
your lab, you will be given an opportunity to schedule the lab at a later
time.
i L A B O V E R V I E W
Scenario and Summary
Welcome to your Week 7 iLab!
• Event Viewer and Performance Monitor (50 points)
You will explore the event viewer and check the system log for errors.
You will then explore the performance monitor and chart a variety of
counters that are available. You will produce three different kinds of
reports.
Deliverables
You are required to submit a lab report to this week’s iLab Dropbox.
i L A B S T E P S
28. STEP 1: Download the template
Download this week’s Lab Report Template. You will use this template
to create your lab report as you execute your lab. In creating your report,
you will capture screenshots at strategic points within your lab.
The lab report template provides detailed instructions for completing
your lab report.
STEP 2: Complete the lab work
After entering the main lab page, perform your lab.
1. Ensure that you meet the system requirements for this lab and that
you understand how to control the devices in the lab.
2. Start your lab and complete each task by following the steps in the
Sample Solution.
STEP 3: Submit your work
When you are satisfied with your documentation, submit your completed
report to the Dropbox located on the silver tab at the top of this page.
For instructions on how to use the Dropbox, read these Step-by-Step
Instructions or watch this Dropbox Tutorial.
See Syllabus “Due Dates for Assignments & Exams” for due date
information
29. ===================================
NETW 230 Week 7 iLab
For more classes visit
www.snaptutorial.com
ETW 230 NETW230 NETW 230 Week 7 iLab
==========================
NETW 230 Week 7 Quiz
For more classes visit
www.snaptutorial.com
(TCO 1) The best way to get a feel for a server’s performance is to
establish a(n) _____ and then frequently monitor server performance
(TCO 5) The _____ process enables the Task Scheduler to run tasks
when scheduled, such as backing up the system at a certain time
(TCO 5) A(n) _____ exists when there are different elements to
monitor—such as individual processes when you use the Process
object—or when a process contains multiple threads or runs
subprocesses under it for the Thread object
(TCO 5) When you set up Active Directory, a domain controller is
automatically set up with the _____ shared folder, which contains
scripts, group policy objects (GPOs), and software distribution files
(TCO 6) The _____ command is used to partition a disk and to manage
multiple partitions on a system
30. (TCO 6) A(n) _____ log tracks occurrences of specific operations, such
as when a disk drive is added
===============================================