1. Curriculum Vitae:
Edward Anak Nyalu
( 60128458692 )
CAREER SUMMARY,
I’m diverse an experience to improve in my career by improving the knowledge
experience & skills that has been gained to higher level to ensure a successfully
fulfilled a number of role in Oil & Gas Offshore & Onshore Oilfield industry in all
aspects of process facilities, My Educational background consists of Mechanical
Engineering / Technical Engineering, Alignment knowledge of experience Pumps,
Gear Box, Diesel Engine, Motors, Reciprocating Compressor, Heat Exchanger,
Static Tester Inspector of PSV, Safety Relief Valve, Control Valve, Installation
Jacket, Topside, Mechanical Maintenance Supervisor, Rotating Equipment
Supervisor, Construction Supervisor,
(Permit to Work) Applicant Competence issuer & to Assist Construction
Supervisor & Project Engineer on the Project with the execution of day
coordinator the contracted work scope,
I had 19 years of Experience in various project disciples which includes, but not
limited to the project both Offshore & Onshore industry Oilfield to share more
about the way that I can contribute to the Team work, Which had the highest
standards for HSE as required.
Executed the contracted scope of work in accordance with specification to
Company’s corporate requirements with particulars emphasis on protection of
the environment.
Responsibility & achievement across multiple functions as well, organized
dependable professional with strong ethic excellent, oral communication & Skill
with a proven ability to work well in a Team & an enthusiastic worker with hands
on approach to the way supervisor.
Maintain a good working environment in all working areas in the field to ensure
good housekeeping & safe working condition, when controlling the work of
others activities,
Report any defects which may result in accident & incident including the
implementation of the corrective action,
Job Role Accountabilities:

2. 01) To receive project documentation & understands scope of work related New
E&I Control Valve, Mechanical Equipment & discipline,
02) To Lead a Team of Technicians to undertake Commissioning activities in
project,
03) To interface with other discipline to ensure integration of activities,
04) Undertake functional & operation tests for various E&I, Mechanical systems,
05) To preparation of method statements, procedures & routines where require,
06) Reports on work progress, bringing to notice potential problems or delays &
recommend solution,
07) To assists during the database preparation for pre-commissioning status
Commissioning Technical database for Mechanical systems,
08) To plan, monitor & assists in vendor activities as required,
09) To ensure temporary supplies & commissioning spares & adequate for the
subsystems testing,
10) To perform inter- discipline checks,
11) Compliance in accordance with HSE standard,
Desired Profile:
Skills & Experience;
A) Knowledge in Mechanical Engineering,
B) 10 Years Commissioning Experience within Oil & Gas Oilfield Industries in a
Key Commissioning Role
C) Good Exposure to Rotating Equipment,
D) Good Supervisory potentials,
E) Good Understanding of specific engineering discipline,
F) Good Command of written & spoken English,
G) Good Technical knowledge & Skills
Main Task : ( HUC Construction Supervisor )

3. Project : KMSE, PipeLine , E&I, WellHead for Petronas Carigali Sdn Bhd.
Company with Perkasapadu Sdn Bhd ( Miri )
2012 to 2013.
Responsible for follow-up of contractor’s Offshore Hook-Up, Control Instrument
execution within Inspection trades due to Safety & Working environment issues,
To work as an integrated member of the Engineering site organization with main
focus on Offshore Hook-Up, Instrument constructability & minimizing the
Offshore Hook-Up Scope assistance to Engineering,
To follow-up contractor’s Offshore Hook-Up preparation by working as an
integrated member of the Hook-Up preparations site & follow-up contractor’s
Offshore Hook-Up execution,
Ensure an optimized Offshore completion plan by close cooperation with the
commissioning Organization,
Liaise with Topside Construction- Platform, Jacket, Surf, & Operation
Organization as required,
Participate in review of Engineering documents, HSE analyses, Quality Control &
Key Performance Indicator to examination as required,
Assignment Description,
The Hook-Up Construction Supervisor is responsible for inputs in a variety of
roles Engineering related to Instrumentation Constructability Inspection including
Safety & work environment issues minimizing & optimizing of Offshore Hook-Up,
E&I, Well Head Project scope & an overall optimized Offshore completion plan,
Familiar with Engineering drawing, schematic geometrical tolerance & ability
understand self driven, able to work independently, creative focus, consistent &
good analytical skills, Team Player with Leadership skills,
Responsible for follow-up of contractor’s Offshore Hook-Up preparation including
physical preparations at fabrication sites within Instrument trades with due
regard to Safety & working environment issues commissioning Offshore scope &
an overall optimized Offshore completion plan & complete the activities project
with agreed punch list Key performance Indicator ( KPI ) before hand over to
asset Team.
Job Description & Responsibilities,
HUC Construction Supervisor. ( Offshore / Onshore )

4. To assist Construction Superintendent / Manager for meeting the targets of
Offshore Construction Job works,
To guidance of the Company’s Offshore Construction local employees for
welding fabrication, Welder, E&I, Electrician, Scaffolder, Riggers, Crane Operator,
& maintenance jobs,
Assist Construction Superintendent / Manager for ensuring the efficient operation
of Offshore Construction,
Safe & efficient operation on Onshore construction facilities and Offshore
Fabrication workshop, Painting, GIT Blasting,
Ensuring Quality of all work carried out is as per specification,
Selection & ordering the materials & equipment to carry out the required work,
Ensure Company procedure & adhered to all working practice are carried out in
safe competent manner.
Responsible all Job done Offshore platform, Onshore fabrication workshop
blasting & painting operation,
Assignment for Hook-up Construction Supervisor is responsible inputs to
Engineering related to Constructability including safety & work environment
issues minimizing & optimizing of Offshore hook-up scope within trades with due
regard to commissioning offshore scope an overall optimizing offshore
completion plan,
Good knowledge of engineering standards & quality control awareness of the
project, ability to interpret methods statements construction schedules &
drawings,
Good Supervisory planning & coordination skills, good communication report &
ability to highlight potential bottlenecks problem,
Coordinate with QA/QC department personnel to witness factory acceptance
tests for Mechanical system including the system in the major equipment
packages,
Liaise with (ORA) team to ensure that all pre-commissioning activities are
performed to their requirement & all performance tests of safety critical elements
are acceptable & Liaise with Contractors & Company site personnel on question
related to commissioning project support for the delivery of Mechanical related
(FPD) initiatives’
Areas of Experties;
Strategic & Tactical Planning + Maintenance + Engineering + Customer Service +
Field Service + Installation + Team Leadership + Analysis + Trouble Shooting +
Alignment Commissioning + Rotating Equipment Repair + Heavy Machinery
Operating.
( INSTALLATION TECHNICAL ASSISTANT),
Mechanical Engineering.

5. KEY RESPONSIBILITIES,
2) To be succeed in this Position role as Technical require an individual who
has the following, etc,
3) Proactively identifying Technical requirements & value creation
opportunities in any area of expertise,
4) Responsible & accountable for Technical aspects of Installation project &
Inspection required to improvement initiatives,
5) Provide has good understanding of the Oil & Gas Energy or chemical
industries operations & production, an engineering data management or
HSE background preferred but not essentials, initiatives,
6) To provide Technical Leadership, thrives on a fast paced work environment
& self motivated, tenacious in their delivery,
7) Provide Technical demonstration strong interpersonal influencing &
relationship management skills in a team.
8) Provide Technical Solutions to specific issues, potential problems,
Reliability, integrity improvement.
9) Has strong exposure to working with various E- reporting systems &
Microsoft suite, exceptional planning & Organizational skills has the ability
to handle multiple project at any one time.
10) Net work with Technical expects for continuous technical development &
advancement, seek introduce best practices, technology, innovative ideas
work processes.
11) Participate & Contribute in Community of practices, ( CoPs) Improvement
Working Group, include Work safe & HSE procedures.
MAIN TASK ;( BARGE TECHNICAL ASSISTANT ENGINEERING ,
PROJECT: INSTALLATION JACKET / PILES & TOPSIDE,
For, MURPHY OIL CORP Bintulu Sarawak,

6. Company: Daiho Offshore Engineering Services Sdn Bhd,
2008 to 2012,
Key Responsibility:
Responsible for checking in a variety of roles on Barge Activities, Mooring
System (Anchor Winches, Anchor Wires, Anchor Brake, Engine, Power Pack,
Crane Hydraulic System, Electrical Power Supply, Deck Machinery, Welding
Machine, Preparation of Tools, Inspection of equipment spare parts, Sufficient
stock of consumables, Spares parts & inventory as required,
Reports of finding to the Installation Barge Superintendent, Installation Barge
Supervisor, & Senior Installation Engineers,
( a ) Executed to conducts toolbox meeting before to start work activities, HSE
& procedures,
( b ) In charge of the Barge Winches operation, operator running anchors during
the barge on its anchor.
( c ) Responsible for planning & plotting anchors positions accordance during
roll-out position of Jacket & Topside Installed approved by the Installation
Engineers & Management required
( d ) To Assisting Installation Barge Supervisor in setting up the Barge on work
Location Onshore & Offshore work activities.
( e ) Make a frequent check on anchors winches, Engine & Power pack, buoys,
Pennant wires in a position of anchors when Barge is operation.
( f ) To Assist the Installation Barge Supervisor with the Deck activities when ever
there is no anchors running activities,
( g) To Assist Jacket Installation, Topside rollout, piles runs into the jacket Legs &
Executed Contractor’s to installed piles pilling.
( h) Maintain high standard to Supervise a good working environment on deck
Responsibilities for the safety of the personnel working under management,
Ensure good housekeeping at all times & safe working condition.
KEY RESPONSIBILITIES:
Work Skilled ; Maintenance Mechanical Supervisor.
I’m an experience Multi discipline Experience in Oil & Gas Industry Oilfield in all

7. aspects of knowledgeable Maintenance, Mechanical Supervisor to work in
Operation both Onshore/Offshore process facilities to the Mechanical service to
perform high- level skilled diagnosis & repair Mechanical work, i.e. Rotating
Equipment, Trouble shooting, disassembly, reassembly, major overhaul, testing &
equipment modification all types of Air & Gas Reciprocating Compressors,
general special purpose steam turbines, single multistage pumps, gearboxes, &
all types of valve Control Inspection Safety Relief Valves, PSV in the field to
performing my duties to assume responsibility for individual activities specified
by the Company & Assist to ensuring that the Maintenance work is carried out &
documented in according with requirements specified in the preventive alignment
maintenance of project program, with good industry practice to responsible for
the HSE of the personnel working under the management, maintain a good
working environment in all working areas to ensure good housekeeping & Safe
working condition,
Demonstrable experience in the successful provision of Permit to Work
Applicant, Equipment Instrument Inspection, including- Pre- commissioning,
commissioning hydrostatic testing, ancillary services in Supervisory capacity &
knowledge of alignment of engines, gearbox, pumps, motors compressor is
added advantage & to assisting project Engineers with the execution of the
contracted work scope to ensure the safe & timely execution of the designated
scope of work,
I’m specializes in the overhaul & repair of ROTATING EQUIPMENT, heat
exchanger, valves, & other Mechanical services are also provided upon request, It
plays a vital roles in the Company at it provides the repair support to all field
organizations by repairing their equipment such as Pumps, Motors, Steam
Turbines, Gas Compressor, Gas Engine, Heat Exchangers, & carried out
Alignment all other equipment that are considered to be the Life Line to the
Corporate existence,
MY EXECUTION TASK:
12) Corrective Maintenance Activities.
13) Planned Maintenance Activities.
14) Equipment Inspection.
15) Contractor Supervision.
16) Job Supervision.
17) Purchase of Material.
18) Services
SENIOR ROTATING EQUIPMENT;
Responsibilities:

8. Lead in the preparation of Compression & Power Generation Module,
Prepare Technical Specification of Centrifugal Gas Compressor, Gas Turbine
driven or Synchronous Motors,
Motor Technical bid evaluation, Clarification with Vendors for technical
confirmation of the package Pump etc,
Prepare Mechanical data sheet for Rotating Equipment to review of the Vendor
package and Client requirement,
Follow up of all Engineering issues for Module Engineering & close any
outstanding issues as promptly as possible.
Attend project meeting, follow up meeting with Vendors, Client and Third Party.
Assist Construction Team during Module fabrication Equipment Installation and
assist the Pre commissioning & Commissioning Team during yard testing.
Attend Factory Acceptance Tests along with Client and Third Party, ( FATs )
Review / Approve vendor documents in line with Client, Contractors
requirements,
Assist Procurement Team as required during ordering stage.
ROLE REQUIREMENTS;
Strong Engineering knowledge in Rotating Equipment for Gas Turbines,
Centrifugal Compressor, Synchronous Motors, associated Parts lay out,
Alignment Gear Box as well,
Possess knowledge of Offshore Oil & Gas Oilfield industries, packages like fuel
Gas, Conditioning skid, Air Coolers, Air Dryer, Instrument Air Package etc.
Possess Knowledge of Static packages like Suction Scrubbers, Filters, Heat
Exchangers etc as well API, ASTM, ASME Codes and Standards Onshore /
Offshore Engineering Commissioning,
Willing to Travel to go to Module Fabrication Yards, Vendor Works for meeting
Coordinate, ( FATs ) Client meeting etc,
Provide assistance HSE to Module Construction Team during Module Fabrication
Installation / Mechanical Completion and Commissioning,
MAIN ACCOUNTABILITIES;
Company, Petra Resources Sdn Bhd (Miri)
TESTER & INSPECTION OF PSV, SAFETY RELIEF VALVE,

9. DURING MLNG TURNAROUND IN MODULE (2) (6) (3) (4) Year 1997 to 1999,
Prepares Documents Tools, Inspection Test Plan During MLNG Turnaround,
Shutdown,
19) Review Supplier quality control plan, Inspection Test Procedures,
20) Attend Kick OFF meeting & Technical Clarification Meeting.
21) Organizing pre-inspection meeting for major & critical items.
22) Coordinate inspection activities between Company, supplier Inspector, &
Inspection agency,
23) Prepare Inspection by 3rd
(third party) format require in order assignment
agency to perform inspection at supplier facilities,
24) Writing reviewing & distributing inspection reports to relevant parties,
(7) Liaise with client regarding Inspection activities & day to days reports
KEY RESPONSIBILITY ,
For Operation Inspection Engineering,
+ To Maintain the jigs fixtures, design, database with drawing & revision levels.
+ To Coordinate with rental tool pool refurbishment & repairs cost/quotes,
+ To plan & execute continual improvement programs related to safety, cost
saving Productivity, quality & delivery,
+ Liaise with production engineering, supply chain team, manage 3rd
party
supplier Fabrication for equipment & tooling repair, Monitor the progress
completion with Quality,
+ Good HSE mindset, HSE leadership qualities work to ISO & API requirements,
+ Familiarity with Oil & Gas System & codes applicable to pressure component+
Generate design layout drawing detail drawing, assembly drawing, perform
design, Detail such as calculations, material, geomantic dimensioning &
tolerances,
Quality Control inspector;
Internal Quality Audit Training, by Mbsm Manufacturing Consultant Sdn Bhd.
Years, 2000 at Petra Resources Sdn Bhd

10. Quality control Inspector performs inspection checks, tests, sampling procedures
on materials parts, components & equipment,
This is inspection in Oil/Gas Onshore & Offshore Oilfields such as structural,
piping, electrical grouting, painting, Mechanical Rotating Machinery Equipment &
commissioning as required,
KEY RESPONSIBILITIES;
25) Perform inspections of fabricated purchased parts sub- assemblies
according to well defined criteria using standard physical & Mechanical
Measurements,
26) Rework or reject sub- assemblies or finished products as required,
27) Conduct& document process & system audits using written procedures as
audit standard & accurately document the results of the Inspection test,
28) Maintain all controlled document files & test records in a timely & accurate
manner,
29) Coordinate calibration of all test equipment & fixtures, & Monitor critical
equipment, instrumentation to ensure proper operation,
30) Participates in the Construction & or revision of Inspection test plans for
the Inspection function,
31) To assist in the writing & updating Inspection procedures, protocol,
checklist,
32) Evaluate problems & make initial recommendation for possible corrective
action to Supervise,
33) Perform review of history records & other documentation for compliance
to established procedures a good documentation practices.
Skills & Past Experience:
34) 1990 to 1993 As a Assistant Wire Line Operator with AMSITO OILWELL
Services (M) Sdn Bhd, for Sarawak Shell Bhd, & SSPC Labuan.
35) 1993 to 1996 As a Assistant Wire Line Operator with EXPERTISE Services

11. (M) Sdn Bhd for Sarawak Shell Bhd, & SSPC Labuan.
36) 1997 to 1999 As a Static Tester & PSV Inspection at MLNG Project with
PETRA RESOURCES Sdn Bhd, during MNLG Turnaround Shut Down.
37) 1999 to 2003 As a Site Supervisor, Project Overhaul / Refurbish (3) Units of
Dresser Rands Compressor at Lay Down Yard in Labuan Supply Base for
SSPC Labuan.
38) 2004 to 2007 As a Sr Rotating Equipment Supervisor, & to Assist Senior
Engineer, Seconded to PETRONAS CARIGALI Sdn Bhd, Dept:- BTS/ 312
Roving Gang.
39) 2008 to 2010 As a Mechanical Supervisor/Technical in a role of Installation
Jacket & Topside with Carimin Engineering Services Sdn Bhd for Murphy
Oil Corp Ltd.
40) 2010 to 2012 As a Technical Assistant for Barge Installation Jacket &
Topside with Daiho Offshore Engineering Services Sdn Bhd for Murphy Oil
Corp Ltd.
41) 2012 to 2013 As a HUC Construction Supervisor at KMSE Pipe Line , E&I,
Well Head with Perkasapadu Sdn Bhd for PETRONAS CARIGALI Sdn Bhd
EDUCATION QUALIFICATION:
In English, Bahasa Malaysia, Math’s , Science
DEGREE
YEAR OF
PASSING
INSTITUTE/UNIVERSITY PERCENTAGE
Secondary School
MCE,
Mechanical
Engineering,
1972.
28,January
2005.
Primary / Secondary School
Lutong Miri
University of Edinburgh Science
& Engineering Convention
Program Course.
Completed &
Passed.
Completed &
Passed.
LIVE PROJECT HANDLE;
Project Title Project Objective
PipeLine
Rejuvenation project
Provision for Hock-up Commissioning for Bakau Platform
for PETRONAS CARIGALI Sdn Bhd. at Lutong, SKO.

12. at Bakau Field.
Float Over
installation Barge,
KMSE PipeLine, E&I
& Well Head .
Rotating
Equipments, &
Alignment
Static Tester Safety
Valve Inspector.
Installed Jacket & Topside for Murphy Oil Corp, Field at
Bintulu Sarawak Offshore .
KMSE Hook-Up, E&I Commissioning Project for PETRONAS
CARIGALI Sdn Bhd, at Bintulu, Offshore, Field.
Gas Lift Compressor , Arieal Compressor, Ingresoll Rand,
Dresser Rand, Kawasaki Compressor, Horizontal Pumps /
Centrifugal pumps for PCSB Lutong SKO, BON Offshore,
Field.
MLNG 1 & 2 Turnaround on Module 2, year 1997,
Module 6, 1998, & Module 3, May 1999,
MLNG – DUA Turnaround in Module 4 August 1999.
DESK PROJECT:
Project Title Project Objective
Barge Technical Assistant:
Rotating Equipment
Supervisor.
Mechanical Engineering
P.T.W Applicant Coordinator:
HUC Construction Supervisor,
HUC Construction Supervisor,
Daiho Offshore Engineering Services Sdn Bhd.
(S’Pore)
Seconded to PCSB Lutong, SKO & BON Field.
Within Petra Resources Sdn Bhd,
Carimin Engineering Services Sdn Bhd.(KL)
Carimin Engineering Services Sdn Bhd,(Miri)
Art Force Synergy Sdn Bhd. ( JB)
Perkasapadu Sdn Bhd: (Miri)
COURSE ATTENDED:
1, HYDROGEN SULPHIDE & SAFETY TEAM COURSE.( Valid )

13. 2, BASIC OFFSHORE SAFETY EMERGENCY TRAINING ( PETRONAS - PSCs
Approved Course) on Helicopter Underwater Escape Training (HUET) including
EBS,
Sea Survival, Fire Fighting & Self Rescue, First Aid & Boat Transfer, ( Medical
Examination Valid Till September 2015)
3, PERMIT- to - WORK (Applicant) Competency as Applicant Signatory, passing
the required examination conducted by, PETRONAS CARIGALI Sdn Bhd.( Valid till
Oct 2015)
4, ROTALIGN- Pro & BORALIGN- Laser Alignment Training by PRUFTECHNIK
S.E.A. PTE LTD.( Valid )
5, INTERNAL QUALITY AUDIT TRAINING by MBSM Manufacturing Consultant Sdn
Bhd, as a INSPECTOR.( Valid )
6, COMPLETED STUDY COURSE, ( University of Edinburgh ) Science &
Engineering Section Hague Convention.(28, January 2005)
ADDITIONAL INFORMATION:
My knowledge of the role Engineer- General whole spectrum actively seeking for
the new opportunities in Oil & Gas Energy Industry, petrochemical segments,
where my experience & knowledge in the field both Onshore / Offshore Oilfield
over 19 years, had done various project in the Companies would like to work
with professional Organization that can provide adequate scope for mutual
growth to work committed Team thorough the core that can work individually in a
Team keeping the Overall, Which I had the highest standards for HSE, as I’m
willing to challenge for my profession to face any Obstacle in my new Job
position at your prospective World Class Company.
PERSONAL DETAILS :
Date of Birth 21st
May 1954 Nationality Malaysian
Gender Male Marital Status Married
Fathers Name Nyalu Languages Known Iban,,Dayak,
English,Bahasa,Malaysia.

14. COVER LETTER
My Cover Letter;
PS, Thank you for taking the time to review my cover letter, I sincerely believe
I’m perfect fit for this role Job position at your Company,
I had welcome the opportunities to prove this to you by scheduling an interview
at your convenience and kind action,
Please call me at 6012 845 8692, I look forward to speaking with you and thanks
again for your consideration,
I hereby declare that all the information provided by me in this application is factual and
correct to the best of my knowledge and belief.
Your Faithfully,
Edward Anak Nyalu,
Email ID, edwardnyaluweb94@gmail.com
Tuai Rumah Banyang ak Ramai,
Batu 8 1/2 Jalan Bintulu Miri,
P.O.Box 1290 Bintulu,Sarawak,
97000 Bintulu
Sarawak, Malaysia.