2. Designed for
mine clearance
The MV-10 is designed to perform one task
only - mine clearance. It is not a modifi ed
construction machine or tank, it is original
double tool system for humanitarian demining.
The MV-10 Double Tool Mine Clearance System is designed to clear various
types of terrain containing antipersonnel (AP) mines, antitank (AT) mines, and
unexploded ordnance (UXO).
The operating tools for digging and mine clearance consist of a flail tool attachment
and tiller tool attachment, or a double flail tool attachment. These are fi xed in front
of the system and are specifi cally designed to detonate or destroy the mines and
UXO as the MV-10 moves forward.
02 / DOK-ING MV-10
3. READY TO USE RIGHT AWAY
Only few minutes are required to unload the MV-10 from
any transportational asset and to begin with mechanical
clearance activities.
The MV-10 requires no special preparation activities or
additional personnel.
SAFETY RIDES FIRST
The MV-10 system weights up to 20 tons, based
on its confi guration, with excellent cross country
performance. It is controlled by a single operator
through a remote control unit. This system provides
the best possible protection for the operator. By
ensuring the operator is well clear of the MV-10 or
inside a protected vehicle, we can be certain that
should a mine (particularly anti-tank) be detonated,
people will be protected from even minor injuries
or health issues that can arise from being in close
proximity to the blast.
Only one operator and two mechanics are required
for transport, operation and repairs/maintenance.
DOK-ING MV-10 / 03
4. MV-10 at glance
HARDOX Deflector
• Resistant to explosions of AP and AT mines
• Protects MV-10 from damage
• Reduces the dispersal area of exploded mines
04 / DOK-ING MV-10
Remote control aerial
• Operational range: 1500 m
in the line of sight
Standard Tool
• Flail (front) & Tiller tool (back)
Additional Tool Attachments
• Blade/gripper tool
• Roller tool
Blade/gripper tool Roller tool
5. Lifting points
Machine armor plates of special
steel resistant to:
• Wear
• Fragments of exploded mines
• Standard ammunition
DOK-ING MV-10 / 05
Standard Remote Control Unit
• Operational range: 1500 m in the
line of sight
• Complete control of all functions
• Battery capacity: 16 hours
Deep profi le tracks
• Can be equipped with track pads
suitable for driving on hard surfaces
Electronic
components
• Sealed -
completely
protected from
dust, humidity,
water and
temperature
6. PROTECTION
The MV-10 Double Tool Mine
Clearance System is clad with
the special Swedish HARDOX
400 armor plates. The MV-10 is
therefore highly resistant to the
fragmentation of landmines.
The experience has shown that,
when working properly, when an
anti-tank mine is detonated, there
is no permanent damage to the
working tools of the MV-10 system.
06 / DOK-ING MV-10
DOUBLE
EFFECTIVENESS
Because of its dimensions, excellent
maneuverability, high engine power, and
low track-ground pressure, the MV-10 can
work year round in almost all conditions
(-19ºC - +54ºC, 100% relative humidity), and
it is not susceptible to damage by rain, snow
or hail.
The MV-10 normally uses both tools - a
rotating flail tool, designed to activate or
shatter AP and AT mines, and rotating tiller
tool, designed as a secondary activation
method and at the same time to keep the
digging depth constant. A flail and tiller unit
can also work one at a time and rotation of
tools is forward and backward.
SIMPLE TRANSPORT
Road transport of the MV-10 is done using a standard flat-bed trailer.
The MV-10 system can also be transported within the C-130 Hercules.
For transport by sea, it can be restrained in similar ways to road
transport plus it has lifting points to enable it to be craned aboard.
7. POST SALE
SERVICES
TRAINING
DOK-ING has a vast experience in landmine clearance
of various types of terrain. The acquired knowledge,
expertise and experience are being passed over to
the new ‘MV-10 teams’ so that they can as soon
as possible start with safe and effi cient landmine
clearance activities. DOK-ING’s standard training
course lasts 2 weeks, either in Croatia or in countries
where the MV-10 systems will be used. Because of
the short training period for personnel, education
costs for MV-10 operators are extremely low.
MAINTENANCE
The MV-10 is easily accessible for inspection,
maintenance, trouble-shooting, repair and/or
replacement. Maintenance and repairs can be carried
out on the fi eld or in workshop conditions. The tools
required for repairs and maintenance are standard
wrenches and additional specially modifi ed tools.
Damage resulting from AP or AT mine detonations is
usually minor in nature and can be corrected with a
minimum expenditure of time and materials.
SPARE PARTS
As a commitment to providing a high quality service
to our customers, DOKING maintains adequate
stocks of parts on our premises, has its own in-house
service capabilities and can send a team at short
notice to any location in the world.
DOK-ING MV-10 / 07
8. MV-10 TECHNICAL CHARACTERISTICS
Dimensions (L x W x H)
Prime mover 4606 x 2240 x 2100 mm
Prime mover with tool 7226 x 2975 x 2129 mm
MV-10 Ground Clearance
Up to bottom armor protection 390 mm
Weight
Prime mover 15.5 metric tons
Prime mover with flail/tiller tool 20 metric tons
Engine
Caterpillar C18 6-cylinder, in-line, turbo-charged diesel 4-stroke, direct injection, water
DOK-ING Ltd.
Kanalski put 1, 10000 Zagreb, Croatia
T +385 1 2481 300 / F +385 1 2481 303
info@dok-ing.com / www.dok-ing.com
cooled
Power rating 571 kW (766 HP) at 2100 rpm
Direction of rotation Clockwise
Torque 3450 Nm at 1400 rpm
Engine weight 1673 kg
Coolant 60 liters
Oil 68 liters
Fuel capacity 480 liters
Fuel consumption 25 - 50 liters/hour
Power transmission
Power transmission Hydrostatic system
To tracks and flail Independent drives for propulsion and flail operation
Hydraulic fluid 430 liters
Track gearbox oil 2 x 2 liters
Working (clearance) speed 0 - 3 km/hour
Maximum transport speed 10 km/hour
Flail rotation velocity 0 - 800 rpm
Tiller rotation velocity 0 - 350 rpm
Gearbox
Gearbox oil 5.5 liters
Mine cleararing capacity
Clearing width 2450 mm
Average depth 350 - 600 mm
Clearing capacity Up to 7000 m²/h
7826
2100
2975
2240
7226
