The MV-10 is a remote-controlled, tracked mine clearance system developed by DOK-ING in Croatia. It is equipped with both a flail and tiller for digging and destroying mines and UXO. The flail activates mines while the tiller captures disturbed soil and maintains a constant digging depth. The MV-10 is powered by a 571kW diesel engine and protected by armor plating, with the ability to withstand mine blasts.
3. INTRODUCTION
• The MV-10 is a remote-controlled, tracked medium
double tool mine clearance system developed by
Croatia-based DOK-ING.
• It is the only medium class mine clearance system
equipped with two standard tools including both a
flail and tiller.
4.
5. DESIGN
• Designed specifically to perform mine clearance
tasks, the MV-10 is equipped with operating tools
such as a tiller and a double flail for digging and
mine clearance.
• Additional tools such as a roller and a blade are also
attached.
• The standard operating tool fitted forward is
specifically designed to destroy the mines and UXO
as the vehicle moves forward.
6.
7. MINE CLEARANCE SYSTEM
• The MV-10 is normally equipped with a combination of
rotating flail and rotating tiller for mine clearance tasks.
• The flail tool is used to activate or shatter AP and AV
mines, while the rotating tiller is used to capture the soil
disturbed by the flail tool.
• The tiller also maintains the constant digging depth by
transferring materials under the machine.
• The tiller and the flail can be operated both
simultaneously and independently.
8.
9. SELF-PROTECTION
• High quality armour is used to cover the vital
parts of the machine.
• The engine and other key components of the
vehicle are protected by HARDOX 400 steel
armour plates.
• The impact hammers are made of steel can
withstand mine blasts.
10.
11. ENGINE
• The MV-10 is powered by a Caterpillar C18 6-
cylinder turbo-charged diesel engine delivering a
power output of 571kW.
• The vehicle consumes about 50l of fuel an hour
depending on terrain and soil conditions.
• Fuel tank capacity is 480l and the Rexroth
Bosch hydraulic system uses 400l of hydraulic
oil.
