ZJQ submersible slurry pump usually suitable for conveying liquid with solid of gravel, cinders, tailings, etc. 3.It’s mainly used in metallurgical industry, mining, coal-fired power plants, etc.

2. Introduction
1. ZJQ series slurry pump is a kind of submersible
slurry pump.
2.It is suitable for conveying liquid with solid of gravel,
cinders, tailings, etc.
3.It’s mainly used in metallurgical industry, mining,
coal-fired power plants, etc.
4. In addition to the main impeller, pump and increase a
paddle wheel at the bottom.Can spray the precipitation
of the sludge into turbulence, make the water pump
achieve high concentrations of transportation without
auxiliary device.
5.It adopts advanced technology to design and
manufacture, having long service life.
6.It is not limited by suction, and have efficiency in slag
suction, and clear silt more thoroughly.
7. Simple operation and easy to management.
8. Wear resistant wet parts: The wet parts are made of
hard metal (Chrome alloy).
9. Long bearing life: The bearing assembly is with large
diameter shaft and short overhang.
10 .It is the featured Products of our company.
11. Vertical centrifugal submersible slurry pump.
Application
1. The efficient Submersible Slurry Pump use motor and pump coaxial work together into
the water .
2. Suitable for conveying liquid containing sand, coal cinder solid particles.
3. Commonly used in metallurgy, mining, thermal power plant enterprises discharge slurry
removal and transportation etc.

3. Type Designation of ZJ slurry pumps
ZJQ 200—15- 22L
Additional Cooling Device
Matched Motor Power: 22Kw
Rated Head: 15m
Rated Capacity: 200m3
/h
Structural characteristics and working principle
ZJQ typ submersible slurry pump is the pump and motor coaxial, work through the motor shaft
drives the pump impeller rotation, Transfer energy to the slurry medium, to produce a certain
velocity, drive the solid flow, implementation of slurry transportation.
Structural Features
1. The whole machine for dry motor pump structure. Motor adopts mechanical seal protection,
can effectively prevent the high pressure water and impurities into the motor chamber.
2. In addition to the mixing impeller, pump and increase a paddle wheel, can spray the
precipitation of the sludge into turbulence and be thrown out.
3. Impeller, mixing impeller, the main flow components adopt high wear-resisting material
manufacturing, wear resistance, corrosion resistance, no jam, sewage capability is strong, can
effectively through the larger solid particles.
4. Without being limited by the suction, suction slag with high efficiency, desilting more
thoroughly.
5. No need equipped with auxiliary vacuum pump, lower investment.
6. No equipped with auxiliary mixing or spraying device, easy operation.
7. Motor is underwater, without construction of complex ground protection and fixtures, manage
more easily.
8. Mixing impeller can directly touch the surface of deposition, through the depth control
concentration, and concentration control more easily.
9. Equipment directly work underwater, no noise and vibration, the scene is more clean and tidy.
Model Feature: Submersible Slurry Pumps

4. Performance

5. Installation Explanation
1.Power is 50 hz, 380 v three-phase ac power supply。
2. The highest temperature shall not be higher than 40 ℃，medium does not contain
flammable and explosive gas
3. Medium solids volume concentration was 30%, the largest largest medium density of 1.2
kg/l
4. Unit maximum diving depth is generally not more than 20 meters, minimum submergence
depth of the submerged motor shall prevail.
5.Unit with vertical work as well in the medium，the operation mode for continuous
operation.